Effects of hydroxyapatite coating on survival of an uncemented femoral stem. A Swedish Hip Arthroplasty Register study on 4,772 hips

There Are over 60 Ways to Produce Biocompatible Calcium Orthophosphate (CaPO4) Deposits on Various Substrates

A The present overview describes various production techniques for biocompatible calcium orthophosphate (abbreviated as CaPO4) deposits (coatings, films and layers) on the surfaces of various types of substrates to impart the biocompatible properties for artificial bone grafts. Since, after being implanted, the grafts always interact with the surrounding biological tissues at the interfaces, their surface properties are considered critical to clinical success. Due to the limited number of materials that can be tolerated in vivo, a new specialty of surface engineering has been developed to desirably modify any unacceptable material surface characteristics while maintaining the useful bulk performance. In 1975, the development of this approach led to the emergence of a special class of artificial bone grafts, in which various mechanically stable (and thus suitable for load-bearing applications) implantable biomaterials and artificial devices were coated with CaPO4. Since then, more than 7500 papers have been published on this subject and more than 500 new publications are added annually. In this review, a comprehensive analysis of the available literature has been performed with the main goal of finding as many deposition techniques as possible and more than 60 methods (double that if all known modifications are counted) for producing CaPO4 deposits on various substrates have been systematically described. Thus, besides the introduction, general knowledge and terminology, this review consists of two unequal parts. The first (bigger) part is a comprehensive summary of the known CaPO4 deposition techniques both currently used and discontinued/underdeveloped ones with brief descriptions of their major physical and chemical principles coupled with the key process parameters (when possible) to inform readers of their existence and remind them of the unused ones. The second (smaller) part includes fleeting essays on the most important properties and current biomedical applications of the CaPO4 deposits with an indication of possible future developments.

A Novel Nanostructured Surface on Titanium Implants Increases Osseointegration in a Sheep Model

BACKGROUND

A nanostructured titanium surface that promotes antimicrobial activity and osseointegration would provide the opportunity to create medical implants that can prevent orthopaedic infection and improve bone integration. Although nanostructured surfaces can exhibit antimicrobial activity, it is not known whether these surfaces are safe and conducive to osseointegration.

QUESTIONS/PURPOSES

Using a sheep animal model, we sought to determine whether the bony integration of medical-grade, titanium, porous-coated implants with a unique nanostructured surface modification (alkaline heat treatment [AHT]) previously shown to kill bacteria was better than that for a clinically accepted control surface of porous-coated titanium covered with hydroxyapatite (PCHA) after 12 weeks in vivo. The null hypothesis was that there would be no difference between implants with respect to the primary outcomes: interfacial shear strength and percent intersection surface (the percentage of implant surface with bone contact, as defined by a micro-CT protocol), and the secondary outcomes: stiffness, peak load, energy to failure, and micro-CT (bone volume/total volume [BV/TV], trabecular thickness [Tb.Th], and trabecular number [Tb.N]) and histomorphometric (bone-implant contact [BIC]) parameters.

METHODS

Implants of each material (alkaline heat-treated and hydroxyapatite-coated titanium) were surgically inserted into femoral and tibial metaphyseal cancellous bone (16 per implant type; interference fit) and in tibial cortices at three diaphyseal locations (24 per implant type; line-to-line fit) in eight skeletally mature sheep. At 12 weeks postoperatively, bones were excised to assess osseointegration of AHT and PCHA implants via biomechanical push-through tests, micro-CT, and histomorphometry. Bone composition and remodeling patterns in adult sheep are similar to that of humans, and this model enables comparison of implants with ex vivo outcomes that are not permissible with humans. Comparisons of primary and secondary outcomes were undertaken with linear mixed-effects models that were developed for the cortical and cancellous groups separately and that included a random effect of animals, covariates to adjust for preoperative bodyweight, and implant location (left/right limb, femoral/tibial cancellous, cortical diaphyseal region, and medial/lateral cortex) as appropriate. Significance was set at an alpha of 0.05.

RESULTS

The estimated marginal mean interfacial shear strength for cancellous bone, adjusted for covariates, was 1.6 MPa greater for AHT implants (9.3 MPa) than for PCHA implants (7.7 MPa) (95% CI 0.5 to 2.8; p = 0.006). Similarly, the estimated marginal mean interfacial shear strength for cortical bone, adjusted for covariates, was 6.6 MPa greater for AHT implants (25.5 MPa) than for PCHA implants (18.9 MPa) (95% CI 5.0 to 8.1; p < 0.001). No difference in the implant-bone percent intersection surface was detected for cancellous sites (cancellous AHT 55.1% and PCHA 58.7%; adjusted difference of estimated marginal mean -3.6% [95% CI -8.1% to 0.9%]; p = 0.11). In cortical bone, the estimated marginal mean percent intersection surface at the medial site, adjusted for covariates, was 11.8% higher for AHT implants (58.1%) than for PCHA (46.2% [95% CI 7.1% to 16.6%]; p < 0.001) and was not different at the lateral site (AHT 75.8% and PCHA 74.9%; adjusted difference of estimated marginal mean 0.9% [95% CI -3.8% to 5.7%]; p = 0.70).

CONCLUSION

These data suggest there is stronger integration of bone on the AHT surface than on the PCHA surface at 12 weeks postimplantation in this sheep model.

CLINICAL RELEVANCE

Given that the AHT implants formed a more robust interface with cortical and cancellous bone than the PCHA implants, a clinical noninferiority study using hip stems with identical geometries can now be performed to compare the same surfaces used in this study. The results of this preclinical study provide an ethical baseline to proceed with such a clinical study given the potential of the alkaline heat-treated surface to reduce periprosthetic joint infection and enhance implant osseointegration.

Ceramic-on-polyethylene hip arthroplasty reduces the risk of postoperative periprosthetic joint infection

Metal-on-polyethylene (MoP) total hip arthroplasty (THA) prostheses are known to release metal debris. Basic science studies suggest that metal implants induce a pro-inflammatory response that ultimately chemoattracts leukocytes including macrophages and neutrophils to the surgical site. This raises concern of higher risk of infection with these prostheses through the "trojan horse" mechanism by which neutrophils and macrophages transport intracellular pathogens from a remote site. This study compared the infection occurrence between MoP and ceramic-on-polyethylene (CoP) implants to determine if a higher infection rate in MoP is present. We reviewed a consecutive series of 6052 CoP and 4550 MoP primary THA patients from 2015 to 2019. The occurrence of periprosthetic joint infection at 2 years was defined according to the 2018 ICM definition. Statistical analysis consisted of descriptive statistics, univariate analysis, and regression modeling. When compared to CoP, MoP patients were older, included more females, had a higher body mass index, and more commonly affected by comorbidities according to Elixhauser's score. Total revisions were higher in the MoP group (3.19% vs. 2.41%) The absolute incidence of PJI was higher in MoP (2.40% vs. 1.64%). When we adjusted for confounding factors, MoP was found independently associated with a higher PJI risk. Despite MoP and CoP both being widely used for primary THA, we found a higher incidence of PJI in MoP patients. The association remained significant when controlled for possible confounders. We hypothesize that leukocyte recruitment to these implants may play a role and should be further investigated.

Clinical results of a short stem with flat tapered wedge design in primary total hip arthroplasty for hip dysplasia in Asians

BACKGROUND

Cementless femoral reconstruction is challenging in hip dysplasia due to deformity of the proximal femur causing insufficient stem fixation and/or inadequate neck anteversion. Strategies to address these problems include the use of a modular stem or a distal fixation stem, but both stems have some characteristic disadvantages.

METHODS

We studied the postoperative clinical outcomes in primary total hip arthroplasty in 257 hips using the flat tapered wedge short femoral stem for hip dysplasia in an Asian population (postoperative follow-up period: 2 years to 6 years and 11 months; mean 4 years and 5 months). We took advantage of the characteristic of high flexibility in stem placement because of its low volume, positioning it while performing some varus/valgus and rotational alignment adjustments.

RESULTS

Favorable clinical functional outcomes were obtained, including the radiographic outcome of biological fixation achieved in all stems. Regarding complications, there was no case of split fracture of the femoral calcar region during stem insertion, and the rate of postoperative dislocation was also low at 0.4% (1 case). In the pre- and postoperative computed tomography measurements, the variability in stem anteversion postoperatively was significantly reduced compared to preoperative anatomical anteversion.

CONCLUSION

This flat-shaped short low-volume stem likely has high flexibility in positioning in cases of hip dysplasia and can be easily positioned to avoid fractures while still achieving secure fixation.

No difference for changes in BMD between two different cementless hip stem designs 2 years after THA

This study evaluates how 2 different total hip arthroplasty (THA) stems compares regarding adaptive bone remodelling. The stems are both proximally porous coated, aiming for proximal fixation, but with different dispersal of the coating. They are also differently designed regarding the distal tip of the stem. We aimed to investigate if there is a difference in periprosthetic adaptive bone remodelling between two different designs. From February 2016 to September 2017, we randomised 62 patients, 1:1 (mean age = 64 years, Female/Male = 28/34), scheduled for an uncemented THA to receive either an EBM or a BM THA stem. We performed dual-energy x-ray absorptiometry (DEXA) scans within a week after surgery and at 3, 6, 12 and 24 months with measurements of bone mineral density (BMD) in the 7 Gruen zones (region of interest (ROI) 1–7). Additionally, Oxford Hip Score and Harris Hip Score were collected at 6, 12 and 24 months. We found a decrease in BMD between the postoperative and the 24-months values in all ROIs for both stems. The greatest decrease over time was seen for both groups in the ROI1 (BM = − 8.4%, p = 0.044, and EBM = − 6.5%, p = 0.001) and ROI7 (BM = − 7%, p = 0.005, and EBM = − 8.6%, p < 0.0005). We found a tendency in ROI2–4 of a higher degree of bone loss in the EBM group. However, this difference only continued beyond 6 months in ROI4 (24 months: BM = − 1.2% and EBM = − 2.8%, p = 0.001). The stems show similar adaptive bone remodelling and are clinically performing well.

Long-term migration of a cementless stem with different bioactive coatings. Data from a "prime" RSA study: lessons learned

Background and purpose - Little is known about the long-term migration pattern of cementless stems in total hip arthroplasty (THA). Furthermore, the role of bioactive coatings in fixation, and thus migration, remains uncertain. Hydroxyapatite (HA) is the most commonly used bioactive coating. However, delamination of the coating might induce loosening. Alternatively, fluorapatite (FA) has proved to be more thermostable than HA, thereby potentially increasing longevity. We assessed the long-term migration of cementless stems with different coatings using radiostereometric analysis (RSA), thereby establishing a reference for acceptable migration. Patients and methods - 61 THAs in 53 patients were randomized to receive either a HA, FA, or uncoated Mallory-Head Porous stem during the years 1992 to 1994. Primary outcome was stem migration measured using RSA and secondary outcome was the Harris Hip Score (HHS). Evaluation took place preoperatively and postoperatively on the second day, at 6, 12, 25 and 52 weeks, and annually thereafter. At the 25-year follow-up, 12 patients (17 THAs) had died and 1 patient (1 THA) was lost to follow-up. Due to the high number of missing second-day postoperative RSA radiographs, the 1-year postoperative RSA radiograph was used as baseline for the comparative analyses. Results - Mean follow-up was 17 years (SD 6.6). All stems showed initial rapid migration with median subsidence of 0.2 mm (-0.1 to 0.6) and median retroversion of 0.9° (-3.2 to 2) at 12 months, followed by stable migration reaching a plateau phase. No stem was revised, albeit 1 stem showed continuous subsidence up to 1.5 mm. Comparing the different coatings, we could not find a statistically significant difference in overall 25-year migration (p-values > 0.05). Median subsidence at 15-year follow-up was for HA -0.1 mm (-0.4 to 0.2), for FA 0 mm (-0.1 to 0.2), and for uncoated stems 0.2 mm (-0.1 to 0.5). Median internal rotation at 15-year follow-up was for HA not available, for FA 1.1° (-0.5 to 2.6), and for uncoated stems 0° (-0.5 to 0.4). HHS were also comparable (p-values > 0.05), with at 15-year follow-up for HA 85 points (41-99), for FA 76 points (61-90), and for uncoated stems 79 points (74-90). Interpretation - The long-term migration pattern of cementless stems using different bioactive coatings has not previously been described. No beneficial effect, or side effect at long-term follow-up of bioactive coatings, was found. The provided migration data can be used in future research to establish thresholds for acceptable migration patterns cementless stem designs.

Influence of Geometry and Extent of Coating on Survival of Cementless Distal-Locking Revision Stems at 7 to 18 Years

BACKGROUND

We aimed to compare the long-term clinical outcomes, complications, and survival of 2 revision stems with different geometries, extents of coating, and distal-locking mechanisms.

METHODS

We retrospectively compared outcomes at a minimum of 7 years following revision THA using 2 proximally coated distal-locking stems: 98 Ultime first-generation (G1) and 116 Linea second-generation (G2) stems. Ten-year Kaplan-Meier survival was assessed considering stem re-revision for any reason and for aseptic reasons. At final follow-up, Harris Hip Score and Oxford Hip Score were collected, and any thigh pain or complications were noted.

RESULTS

Considering re-revision for any reason, survival was 69% for G1 stems and 91% for G2 stems. Considering re-revision for aseptic reasons, survival was 77% for G1 stems and 92% for G2 stems. Re-revisions were due to fracture of 6 G1 stems but no G2 stems. Complications that required reoperation without stem or cup removal occurred in 3 of the G1 stems and 1 of the G2 stems. Compared to the G1 stems, the G2 stems resulted in better Harris Hip Score (83 vs 71, P = .001), Oxford Hip Score (22 vs 27, P = .019), less thigh pain (4% vs 39%, P < .001), and fewer nonoperated complications (9% vs 15%).

CONCLUSION

The second-generation stem had significantly better survival and clinical outcomes than the first-generation stem. The differences in survival and clinical outcomes could be attributed to the larger coated surface of the G2 stem and to the fact that the G1 stem was originally intended as a temporary implant to be followed by de-escalation.

Migration of the uncemented Echo Bi-Metric and Bi-Metric THA stems: a randomized controlled RSA study involving 62 patients with 24-month follow-up

Background and purpose - Despite the good results after total hip arthroplasty (THA), new implants are continuously being developed to improve durability. The Echo Bi-Metric (EBM) THA stem is the successor to the Bi-Metric (BM) THA stem. The EBM stem includes many of the features of the BM stem, but minor changes in the design might improve the clinical performance. We compared the migration behavior with radiostereometric analysis (RSA) of the EBM stem and the BM stem at 24 months and evaluated the clinical outcome. Patients and methods - We randomized 62 patients with osteoarthritis (mean age 64 years, female/male 28/34) scheduled for an uncemented THA to receive either an EBM or a BM THA stem. We performed RSA within 1 week after surgery and at 3, 6, 12, and 24 months. The clinical outcome was evaluated using Harris Hip Score (HHS) and Oxford Hip Score (OHS). Results - At 24 months, we found no statistically significant differences in migration between the two implants. During the first 3 months both the EBM and the BM stems showed visible subsidence (2.5 mm and 2.2 mm respectively), and retroversion (2.5° and 2.2° respectively), but after 3 months this stabilized. The expected increase in HHS and OHS was similar between the groups. Interpretation - The EBM stem showed a migration at 24 months not different from the BM stem, and both stems display satisfying clinical results.

The Accolade TMZF stem fulfils the demands of modern stem design: Minimum 5-year survival in a cohort of 937 patients

PURPOSE

Modern hip stem design includes a prosthesis that has a predictable outcome in all total hip arthroplasty (THA) patients, regardless of approach, surgeon or patient characteristics. Introduction without a learning curve and, in cases of problems, the possibility for a simple revision are other prerequisites. The purpose of this study is to evaluate whether the Accolade TMZF stem (Stryker Orthopedics, Mahwah, New Jersey, USA) is suitable to fulfil these demands. We report our mid-term survival of the Accolade TMZF hip stem in all patients from the first implantation at our institute.

METHODS

From the start of using the Accolade TMZF stem (March 2009) until February 2011, 937 THA were performed by 12 surgeons using a posterolateral or anterolateral approach. Survival of the stem was calculated using Kaplan-Meier analysis. Effect of approach, patient age and comorbidity were analysed with a Cox proportional hazards' model. The learning effect was determined by comparing the number of revisions in the surgeons' first 20 THAs with their next 30 THAs and the subsequent THAs.

RESULTS

At 5 years, cumulative stem survival was 97.9% based on revisions for all reasons and 98.8% with aseptic loosening as endpoint. We found no effect of surgical approach, patient age or comorbidity on stem survival. No learning effect was found.

CONCLUSION

The Accolade TMZF stem fulfilled the demands of modern stem design.

Bioinspired surface modification of orthopedic implants for bone tissue engineering

Biomedical implants have been widely used in various orthopedic treatments, including total hip arthroplasty, joint arthrodesis, fracture fixation, non-union, dental repair, etc. The modern research and development of orthopedic implants have gradually shifted from traditional mechanical support to a bioactive graft in order to endow them with better osteoinduction and osteoconduction. Inspired by structural and mechanical properties of natural bone, this review provides a panorama of current biological surface modifications for facilitating the interaction between medical implants and bone tissue and gives a future outlook for fabricating the next-generation multifunctional and smart implants by systematically biomimicking the physiological processes involved in formation and functioning of bones.

Bone ongrowth of a cementless silver oxide-containing hydroxyapatite-coated antibacterial acetabular socket

BACKGROUND

The silver oxide-containing hydroxyapatite-coated socket (KYOCERA, Osaka, Japan) is a cementless antibacterial implant that has both the osteoconductivity of the HA and the antibacterial activity of silver. The silver oxide-containing hydroxyapatite coating was shown to have good osteoconductivity and new bone formation in vitro and in vivo. However, the histological bone ongrowth of this implant has not been proven in a clinical study.

METHODS

We analyzed bone ongrowth using two silver oxide-containing hydroxyapatite-coated sockets that were removed in revision total hip arthroplasty for recurrent dislocation. A histomorphometric analysis was performed using a scanning electron microscope (SEM) connected to a CCD camera and an elemental analysis was performed by energy-dispersive elemental spectrometry (EDS).

RESULT

A white structure thought to be osseous tissue was attached to the retrieved socket surface macroscopically, and histological bone ongrowth of the silver oxide-containing hydroxyapatite coating of the socket was confirmed by SEM. In addition, the presence of silver in the silver oxide-containing hydroxyapatite coating was confirmed in an elemental analysis by EDS.

CONCLUSION

Histologically, the silver oxide-containing hydroxyapatite-coated socket presented bone ongrowth in this clinical study.

What Is the Risk of Revision Surgery in Hydroxyapatite-coated Femoral Hip Stems? Findings From a Large National Registry

BACKGROUND

Despite wide adoption of hydroxyapatite (HA)-coated femoral stems in THA, no studies have found differences in the risk of revision surgery with its use or investigated the interaction of different prosthesis designs with stem coating.

QUESTIONS/PURPOSES

The purpose of this study was to evaluate the risk of revision in THAs with HA-coated stems compared with non-HA-coated. To achieve this purpose, we asked: (1) What is the difference in risk of revision of THAs with HA-coated femoral stems compared with non-HA-coated using an aggregate analysis? (2) What is the difference in risk of revision of THAs with HA-coated femoral stems compared with non-HA-coated for five prosthesis types that used the same femoral and acetabular component combination but where the femoral stem had both a HA and non-HA coating option?

METHODS

The Australian Orthopaedic Association National Joint Replacement Registry analyzed cementless primary THA registered between September 1, 1999, and December 31, 2014. Of the 147,645 cases that fit our selection criteria, 81.1% (N = 119,673) had HA-coated stems. Overall (that is, all procedures with any prostheses in the registry) and five prosthesis designs where both an HA-coated stem and non-HA-coated stem exist (Zimmer's VerSys®/Trilogy® [N = 3924], Biomet's Mallory-Head®/Mallory-Head [N = 2538], Smith & Nephew's SL-Plus/EP Fit-Plus [N = 2028], Biomet's Taperloc®/Exceed [N = 1668], and Biomet's Taperloc/Mallory-Head [N = 1240]) were evaluated. Revision surgery was the outcome of interest. Survival analyses were conducted and hazard ratios (HRs) were adjusted for age, sex, bearing surface, femoral head size, and acetabular component HA coating.

RESULTS

In the overall cohort, HA stems had a lower any-cause revision risk after 6 months (HR, 0.83; 95% confidence interval [CI], 0.72-0.95; p = 0.007). However, the risk of revision varied when we evaluated the effect of HA on revision for specific prothesis combinations that had both HA and non-HA options for the femoral stem. VerSys/Trilogy, Mallory-Head/Mallory-Head, Taperloc/Exceed, and Taperloc/Mallory-Head did not have a lower risk of any-cause revision with HA-coated stems compared with non-HA-coated. Only the SL-Plus/EP Fit-Plus subgroup showed a lower risk of revision for loosening (HR, 0.17; 95% CI, 0.06-0.44 between 0 and 7 years; p < 0.001) with HA- compared with non-HA-coated stems, but this was observed after an early (< 6 months) higher risk of revision for any reason (HR, 2.88; 95% CI, 1.15-7.21; p = 0.024).

CONCLUSIONS

Overall, HA coating of femoral stems was found to be associated with a 17% lower risk of revision for any reason. However, the lower risk of revision associated with HA was not consistent for all prosthesis designs where both HA- and non-HA-coated femoral stem versions were available. Some HA-coated stems have higher revision rates compared with their non-HA-coated versions. Our findings suggest that the effect of HA coating on revision risk varies depending on prosthesis design.

LEVEL OF EVIDENCE

Level II, therapeutic study.

Effect of stem alignment on long-term outcomes of total hip arthroplasty with cementless Bi-Metric femoral components

We investigated the effects of varus-valgus alignment on the long-term outcomes after cementless total hip arthroplasty (THA) using a porous coated version of Bi-Metric^® femoral stems. The Kaplan-Meier survival analysis was performed in 71 hips. The survival rate with femoral revision for aseptic loosening as the end point was 100% at 17 years. Nevertheless, the initial stem alignment was more valgus in patients with the Engh grade III-IV stress shielding than patients with the Engh grade I-II. Our results suggest that valgus misalignment of cementless Bi-Metric stem might be a potential risk factor for the progression of stress shielding.

Total Hip Arthroplasty With a Fully Hydroxyapatite-Coated Stem: A Cohort Study During 23-28 Years

BACKGROUND

Long-term results of a hydroxyapatite (HA)-coated stem are sparse. We have followed a cohort of patients operated with a grit-blasted titanium stem designed for press-fit insertion and entirely plasma-sprayed with HA up to 28 years.

METHODS

In the years 1988-1993, we performed 323 primary total hip arthroplasties in 276 patients (189 women). Their mean age was 48 (15-79) years. During the following years, 83 patients with 88 hips have died, and 18 patients did not attend the follow-up examination, but had no major symptoms according to telephone interviews and control examination. Thus, 212 patients (255 hips) were followed up for more than 20 years.

RESULTS

Three patients were revised because of late periprosthetic infection, 1 because of a fall with periprosthetic fracture, and 2 stems were revised due to mechanical failure. Osteolysis was significantly associated with wear, and wear was significantly associated with the size of the femoral head. We found a small amount of proximal bone loss and a low incidence of distal hypertrophy of the bone. The bone changes confirmed a well-fixed femoral component in asymptomatic patients.

CONCLUSION

Our findings indicate an essentially physiological weight distribution from the stem to the femoral bone with no significant thigh pain. The changes in the bone confirmed that the femoral component was well-fixed, and we conclude that a fully HA-coated titanium stem designed for press-fit insertion lasts for 23-28 years.

Survival of hydroxyapatite-coated cups: acetabular screws involve a lower rate of revision surgery due to aseptic loosening

BACKGROUND

It is believed that the path of acetabular screws may represent a shuttle between hydroxyapatite (HA) particles and the liner. The aim was to assess the relationship between acetabular screws and revision surgery for aseptic loosening in total hip arthroplasties (THAs).

MATERIAL AND METHODS

A retrospective multicentric study was performed. Patients older than 18 years and patients who underwent THA with both the stem and cup HA-coated were included. The rate of revision-surgery considering only aseptic loosening was calculated. The proportion of cases in which acetabular screws were used was registered, as well as the proportion of cups that showed osteolysis. The statistical relationship between acetabular screws and osteolysis, as well as acetabular screws and revision-surgery for aseptic loosening were assessed.

RESULTS

There were 749 cases. Mean age 62.1 (45-84) years. Mean follow-up 14.19 (8.9-16.7) years. Revision surgery was performed in 12.8% (96/749) of the cups. 73.95% (71/96) of the revised cups showed aseptic loosening. The overall 15-year survival of the cups considering only aseptic loosening was 84.4%. Acetabular screws were used in 47.5% (356/749) of the cups. Acetabular screws were used in 40.44% (55/136) of the cups that showed osteolysis. The use of acetabular screws was associated with less osteolysis (p = 0.006). Acetabular screws were used in 35.21% (25/71) of the cups that were revised for aseptic loosening. The use of acetabular screws was associated with a lower rate of revision surgery (p = 0.020).

CONCLUSIONS

In THA with the stem and cup HA-coated, the use of acetabular screws is associated with a lower rate of revision surgery.

The Absence of Hydroxyapatite Coating on Cementless Acetabular Components Does Not Affect Long-Term Survivorship in Total Hip Arthroplasty

BACKGROUND

Hydroxyapatite (HA) has been applied to joint prostheses as a bioactive coating to prolong their durability. However, HA benefits for cup survival in total hip arthroplasty (THA) remain controversial. In this study, we compared the survival of cups with and without HA coating during a minimum follow-up of 18 years.

METHODS

In total, 183 THA cases in 163 patients were analyzed, including 73 cups with HA coating (HA(+) group) and 110 without HA coating (HA(-) group); otherwise, the cups had identical titanium-sprayed rough surfaces and were fixed with screws. In both groups, the same conventional polyethylene liners were applied. Zirconia and alumina ceramic heads were used in the HA(+) and HA(-) groups, respectively. We retrospectively analyzed cup survival based on cup revision for any reason or aseptic loosening as end points.

RESULTS

In total, 7 and 8 revisions were performed in the HA(-) and HA(+) groups with survival rates of 86.3% and 90.1%, respectively. Among them, 3 cups in the HA(-) group and 1 cup in the HA(+) group were revised for aseptic loosening in 20 years (survival rates 94.1% and 98.7%, respectively). No significant difference was detected in cup survival rates between the groups based on both end points. There were no stem revisions during the observation period.

CONCLUSION

The results suggested that HA coating did not have either beneficial or adverse effects on the long-term cup survival in primary cementless THA.

No medium-term advantage of electrochemical deposition of hydroxyapatite in cementless femoral stems. 5-year RSA and DXA results from a randomized controlled trial

BACKGROUND AND PURPOSE

Hydroxyapatite has been used for a long time as an adjunct to enhance cementless fixation. The benefit of this is still debated, but new methods of hydroxyapatite deposition have emerged, offering possible gains. In order to investigate this further, we compared the migration pattern and periprosthetic bone remodeling in a cementless femoral stem with either electrochemically deposited hydroxyapatite-called Bonemaster (BM)-or a conventional plasma-sprayed hydroxyapatite (HA) coating.

PATIENTS AND METHODS

55 hips were randomized to either BM or HA cementless femoral stems. Patients were followed with radiostereometry (RSA), dual-energy X-ray absorptiometry (DXA), radiographic measurements, and hip questionnaires for 5 years.

RESULTS

For both stems, migration occurred mainly as subsidence and retroversion during the first 3 months. The BM group had a higher retroversion rate of 0.17° per month during this period, as compared to 0.06° per month for the HA group (p = 0.006). Thereafter, there was almost no movement in any direction for both stem types. Bone resorption occurred mainly during the first year, and subsequently decreased to a rate close to what is seen in normal ageing. The greatest total decrease occurred in Gruen zones 1 and 7, similar in the groups at 5 years. There was a slightly higher resorption rate in Gruen zone 7 from 2 to 5 years in the BM group (1.3% per year; p = 0.04), but in a magnitude that would scarcely affect stem stability or survival.

INTERPRETATION

There were no clinically relevant differences between the 2 stems regarding stability or periprosthetic bone loss at 5 years. Electrochemically deposited HA does not appear to affect fixation or bone remodeling when compared to conventional plasma spraying at 5 years. Thus, at this point, Bonemaster appears to be safe.

Long-Term Comparison of Porous Versus Hydroxyapatite Coated Sleeve of a Modular Cementless Femoral Stem (SROM) in Primary Total Hip Arthroplasty

Hydroxyapatite (HA) is commonly used on femoral stems to assist in osseous integration but there is limited evidence of the benefit it provides. We report a prospective comparison of 117 and 102 patients receiving either porous or HA coated sleeves respectively. Patients were evaluated at mean of 12.5 years in the porous and 13.7 years in the HA groups. The mean Harris Hip Score was 94.7 and 94.5 in the porous and HA groups respectively. One porous and 2 HA stems required revision. This study demonstrates that there is no long-term advantage to using an HA coating on the sleeve of this modular stem and confirms excellent long-term results for the SROM stem in a primary arthroplasty setting.

LEVEL OF EVIDENCE

II (prospective cohort study).

Calcium orthophosphate deposits: Preparation, properties and biomedical applications

Since various interactions among cells, surrounding tissues and implanted biomaterials always occur at their interfaces, the surface properties of potential implants appear to be of paramount importance for the clinical success. In view of the fact that a limited amount of materials appear to be tolerated by living organisms, a special discipline called surface engineering was developed to initiate the desirable changes to the exterior properties of various materials but still maintaining their useful bulk performances. In 1975, this approach resulted in the introduction of a special class of artificial bone grafts, composed of various mechanically stable (consequently, suitable for load bearing applications) implantable biomaterials and/or bio-devices covered by calcium orthophosphates (CaPO4) to both improve biocompatibility and provide an adequate bonding to the adjacent bones. Over 5000 publications on this topic were published since then. Therefore, a thorough analysis of the available literature has been performed and about 50 (this number is doubled, if all possible modifications are counted) deposition techniques of CaPO4 have been revealed, systematized and described. These CaPO4 deposits (coatings, films and layers) used to improve the surface properties of various types of artificial implants are the topic of this review.

Register data in the evaluation and program planning of addiction treatment programs: using Sweden as an example

Data from large-scale registers is often underutilized when evaluating addiction treatment programs. Since many programs collect register data regarding clients and interventions, there is a potential to make greater use of such records for program evaluation. The purpose of this article is to discuss the value of using large-scale registers in the evaluation and program planning of addiction treatment systems and programs. Sweden is used as an example of a country where register data is both available and is starting to be used in national evaluation and program planning efforts. The article focuses on possibilities, limitations and practicalities when using large-scale register data to conduct evaluations and program planning of addiction treatment programs. Main conclusions are that using register data for evaluation provides large amounts of data at low cost, limitations associated to the use of register data may be handled statistically, register data can answer important questions in planning of addiction treatment programs, and more accurate measures are needed to account for the diversity of client populations.

Cementless hydroxyapatite coated hip prostheses

More than twenty years ago, hydroxyapatite (HA), calcium phosphate ceramics, was introduced as a coating for cementless hip prostheses. The choice of this ceramic is due to its composition being similar to organic apatite bone crystals. This ceramic is biocompatible, bioactive, and osteoconductive. These qualities facilitate the primary stability and osseointegration of implants. Our surgical experience includes the implantation of more than 4,000 cementless hydroxyapatite coated hip prostheses since 1990. The models implanted are coated with HA in the acetabulum and in the metaphyseal area of the stem. The results corresponding to survival and stability of implants were very satisfactory in the long-term. From our experience, HA-coated hip implants are a reliable alternative which can achieve long term survival, provided that certain requirements are met: good design selection, sound choice of bearing surfaces based on patient life expectancy, meticulous surgical technique, and indications based on adequate bone quality.

Hydroxyapatite coating does not improve uncemented stem survival after total hip arthroplasty!

BACKGROUND AND PURPOSE

It is still being debated whether HA coating of uncemented stems used in total hip arthroplasty (THA) improves implant survival. We therefore investigated different uncemented stem brands, with and without HA coating, regarding early and long-term survival.

PATIENTS AND METHODS

We identified 152,410 THA procedures using uncemented stems that were performed between 1995 and 2011 and registered in the Nordic Arthroplasty Register Association (NARA) database. We excluded 19,446 procedures that used stem brands less than 500 times in each country, procedures performed due to diagnoses other than osteoarthritis or pediatric hip disease, and procedures with missing information on the type of coating. 22 stem brands remained (which were used in 116,069 procedures) for analysis of revision of any component. 79,192 procedures from Denmark, Norway, and Sweden were analyzed for the endpoint stem revision. Unadjusted survival rates were calculated according to Kaplan-Meier, and Cox proportional hazards models were fitted in order to calculate hazard ratios (HRs) for the risk of revision with 95% confidence intervals (CIs).

RESULTS

Unadjusted 10-year survival with the endpoint revision of any component for any reason was 92.1% (CI: 91.8-92.4). Unadjusted 10-year survival with the endpoint stem revision due to aseptic loosening varied between the stem brands investigated and ranged from 96.7% (CI: 94.4-99.0) to 99.9% (CI: 99.6-100). Of the stem brands with the best survival, stems with and without HA coating were found. The presence of HA coating was not associated with statistically significant effects on the adjusted risk of stem revision due to aseptic loosening, with an HR of 0.8 (CI: 0.5-1.3; p = 0.4). The adjusted risk of revision due to infection was similar in the groups of THAs using HA-coated and non-HA-coated stems, with an HR of 0.9 (CI: 0.8-1.1; p = 0.6) for the presence of HA coating. The commonly used Bimetric stem (n = 25,329) was available both with and without HA coating, and the adjusted risk of stem revision due to aseptic loosening was similar for the 2 variants, with an HR of 0.9 (CI: 0.5-1.4; p = 0.5) for the HA-coated Bimetric stem.

INTERPRETATION

Uncemented HA-coated stems had similar results to those of uncemented stems with porous coating or rough sand-blasted stems. The use of HA coating on stems available both with and without this surface treatment had no clinically relevant effect on their outcome, and we thus question whether HA coating adds any value to well-functioning stem designs.

Tough and adhesive nanostructured calcium phosphate thin films deposited by the pulsed plasma deposition method

Calcium phosphate thin films were deposited at room temperature by the pulsed plasma deposition method. After annealing at 600 °C, film mechanical properties and adhesion to the titanium substrate strongly improved.

Long Term Outcomes of Total Hip Arthroplasty in Young Patients under 30

BACKGROUND

We aimed to report outcomes of total hip arthroplasty (THA) in very young patients under the year of 30.

METHODS

Thirty patients (45 hips) with various indications for THA were retrospectively reviewed radiologically and clinically and analyzed regarding survival, reasons of failure, factors associated with outcomes and postoperative complications.

RESULTS

Within a mean follow-up time of 116 months the 10-year survival rate was 90.3%. All hips were revised due to aseptic loosening. No association was found among the tested parameters with increased revision rates. Three complications associated with the THA were recorded and managed conservatively. All patients had statistically significant improved clinical scores compared to the pre-operative period, despite the underlying disorder that compromised the condition in the majority of the patients.

CONCLUSIONS

Our study showed excellent long term outcomes of THA in patients younger than 30 years of age, comparable with those in older patients.

The Effect of Hydroxyapatite Coating on Long-term Results of Total Hip Arthroplasty with Hydroxyapatite-coated Anatomic Femoral Stem

Purpose

To evaluate the clinical and radiological results, as well as the survival rate, associated with total hip arthroplasty using a hydroxyapatite (HA)-coated anatomical femoral stem at a follow-up of ≥12 years.

Materials and Methods

From April 1992 to May 1997, 86 patients (102 hips) underwent total hip arthroplasty with a HA-coated ABG I (Anatomical Benoist Giraud; Howmedica) hip prosthesis. The average age at the time of surgery was 53.4 years and the mean duration of follow-up was 17.1 years (range, 12.1-21.0 years). The Harris hip score (HHS) and radiographic assessments of thigh pain were used to evaluate the clinical results. We observed osteointegration, cortical hypertrophy, reactive line, calcar resorption and osteolysis around the femoral stems. The survival rate of the femoral stems was evaluated by using the span of time to a revision operation for any reasons was defined as the end point.

Results

The mean HHS was 50.5 preoperatively and 84.2 at the time of last follow-up. Osteolysis only around the HA-coated proximal portion of the femoral stem was observed in 72 hips, cortical hypertrophy all around the distal portion of the femoral stem was observed in 38 hips, and calcar resorption was observed in 44 hips. A reactive line was observed in 13 hips, but was unrelated to component loosening. Stem revision operations were performed in 24 (23%) hips due to osteolysis (14 hips), fracture (5 hips) and infection (5 hips). The femoral stem survival rate was 75% over the mean duration of follow-up.

Conclusion

Total hip arthroplasty using a HA-coated anatomical femoral stem showed necessitated a high rate of revision operations due to osteolysis around the femoral stem in this long term follow-up study.

Comparison of two different Radiostereometric analysis (RSA) systems with markerless elementary geometrical shape modeling for the measurement of stem migration

Radiostereometric analysis (RSA) is the gold standard of measurement for in vivo 3D implants migration.

BACKGROUND

The aim of this study was to evaluate the in vivo precision of 2 RSA marker-based systems compared with that of marker-free, elementary geometrical shape modeling RSA.

METHODS

Stem migration was measured in 50 patients recruited from an on-going Randomized Controlled Trial. We performed marker-based analysis with the Um RSA and RSAcore systems and compared these results with those of the elementary geometrical shape RSA.

FINDINGS

The precision for subsidence was 0.118 mm for Um RSA, 0.141 mm for RSAcore, and 0.136 mm for elementary geometrical shape RSA. The precision for retroversion was 1.3° for elementary geometrical shape RSA, approximately 2-fold greater than that for the other methods. The intraclass correlation coefficient between the marker-based systems and elementary geometrical shape RSA was approximately 0.5 for retroversion. All 3 methods yielded ICCs for subsidence and varus-valgus rotation above 0.9.

DISCUSSION

We found an excellent correlation between marker-based RSA and elementary geometrical shape RSA for subsidence and varus-valgus rotation, independent of the system used. The precisions for out-of-plane migration were inferior for elementary geometrical shape RSA. Therefore, as a mechanism of failure, retroversion may be more difficult to detect early. This is to our knowledge the first study to compare different RSA systems with or without markers on the implant.

INTERPRETATION

Marker-based RSA has high precision in all planes, independent of the system used. Elementary geometrical shape RSA is inferior in out-of-plane migration.

Bioactive coatings for orthopaedic implants-recent trends in development of implant coatings

Joint replacement is a major orthopaedic procedure used to treat joint osteoarthritis. Aseptic loosening and infection are the two most significant causes of prosthetic implant failure. The ideal implant should be able to promote osteointegration, deter bacterial adhesion and minimize prosthetic infection. Recent developments in material science and cell biology have seen the development of new orthopaedic implant coatings to address these issues. Coatings consisting of bioceramics, extracellular matrix proteins, biological peptides or growth factors impart bioactivity and biocompatibility to the metallic surface of conventional orthopaedic prosthesis that promote bone ingrowth and differentiation of stem cells into osteoblasts leading to enhanced osteointegration of the implant. Furthermore, coatings such as silver, nitric oxide, antibiotics, antiseptics and antimicrobial peptides with anti-microbial properties have also been developed, which show promise in reducing bacterial adhesion and prosthetic infections. This review summarizes some of the recent developments in coatings for orthopaedic implants.

Clinical results, radiological findings and survival of a proximally hydroxyapatite-coated hip ABG II stem at a minimum of ten years' follow-up: results of a consecutive multicentre study of 1148 hips in 1053 patients

We report a multicentre prospective consecutive study assessing the long-term outcome of the proximally hydroxyapatite (HA)-coated ABG II monobloc femoral component in a series of 1148 hips in 1053 patients with a mean age at surgery of 64.77 years (22 to 80) at a mean follow-up of 10.84 years (10 to 15.25). At latest follow-up, the mean total Harris hip score was 94.7 points (sd; 6.87; 49 to 100), and the mean Merle d'Aubigné-Postel score was 17.6 points (sd 1.12; 7 to 18). The mean total Engh radiological score score was 21.54 (sd 5.77; 3.5 to 27), with 95.81% of 'confirmed ingrowth', according to Engh's classification. With aseptic loosening or pain as endpoints, three AGB II stems (0.26%) failed, giving a 99.7% survival rate (se 0.002; 95% confidence interval (CI) 0.994 to 1) at 14 years' follow-up. The survival of patients ≤ 50 years of age (99.0% (se 0.011; 95% CI 0.969 to 1)) did not differ significantly from those of patients aged > 50 years (99.8% (se 0.002; 95% CI 0.994 to 1)). This study confirmed the excellent long-term results currently achieved with the ABG II proximally HA-coated monobloc stem. Cite this article: Bone Joint J 2013;95-B:1610-16.

Significance of calcium phosphate coatings for the enhancement of new bone osteogenesis--a review

A systematic analysis of results available from in vitro, in vivo and clinical trials on the effects of biocompatible calcium phosphate (CaP) coatings is presented. An overview of the most frequently used methods to prepare CaP-based coatings was conducted. Dense, homogeneous, highly adherent and biocompatible CaP or hybrid organic/inorganic CaP coatings with tailored properties can be deposited. It has been demonstrated that CaP coatings have a significant effect on the bone regeneration process. In vitro experiments using different cells (e.g. SaOS-2, human mesenchymal stem cells and osteoblast-like cells) have revealed that CaP coatings enhance cellular adhesion, proliferation and differentiation to promote bone regeneration. However, in vivo, the exact mechanism of osteogenesis in response to CaP coatings is unclear; indeed, there are conflicting reports of the effectiveness of CaP coatings, with results ranging from highly effective to no significant or even negative effects. This review therefore highlights progress in CaP coatings for orthopaedic implants and discusses the future research and use of these devices. Currently, an exciting area of research is in bioactive hybrid composite CaP-based coatings containing both inorganic (CaP coating) and organic (collagen, bone morphogenetic proteins, arginylglycylaspartic acid etc.) components with the aim of promoting tissue ingrowth and vascularization. Further investigations are necessary to reveal the relative influences of implant design, surgical procedure, and coating characteristics (thickness, structure, topography, porosity, wettability etc.) on the long-term clinical effects of hybrid CaP coatings. In addition to commercially available plasma spraying, other effective routes for the fabrication of hybrid CaP coatings for clinical use still need to be determined and current progress is discussed.

Is the bone-bonding ability of a cementless total hip prosthesis enhanced by alkaline and heat treatments?

BACKGROUND

Cementless total hip arthroplasty (THA) implants using alkaline and heat treatments were developed to enhance bone bonding. Although bone-bonding ability of the alkali- and heat-treated titanium surface has been demonstrated in animal studies, it remains unknown whether it enhances or provides durable bone bonding in humans.

QUESTIONS/PURPOSES

We therefore (1) determined long-term survivorship, function, and radiographic signs of failure of fixation of alkali- and heat-treated THA implants; and (2) histologically examined their bone-bonding ability in two human retrievals.

METHODS

We retrospectively reviewed 58 patients who underwent 70 primary THAs, of whom 67 were available for minimum followup of 8 years (average, 10 years; range, 8-12 years). Survival rate was calculated. Hip function was evaluated using the Japan Orthopaedic Association (JOA) hip scores, and radiographic signs of implant failure were determined from anteroposterior radiographs. Two retrieved implants were investigated histologically.

RESULTS

Using revision for any reason as the end point, the overall survival rate was 98% (95% confidence interval, 96%-100%) at 10 years. The patients' average JOA hip scores improved from 47 points preoperatively to 91 points at the time of the last followup. No implant had radiographic signs of loosening. Histologically we observed bone in the pores 2 weeks after implantation in one specimen and apparently direct bonding between bone and the titanium surface in its deep pores 8 years after implantation.

CONCLUSIONS

Cementless THA implants with alkaline and heat treatments showed a high survival rate. Further study is required to determine whether the treatment enhances direct bone bonding.

No superior performance of hydroxyapatite-coated acetabular cups over porous-coated cups

BACKGROUND AND PURPOSE

Hydroxyapatite (HA) coating is believed to improve bone-implant ingrowth and long-term survival of prostheses. Recent studies, however, have challenged this view. Furthermore, HA particles may produce third-body wear and initiate aseptic loosening of implants. We report the performance of HA- and porous-coated acetabular cups in a prospective randomized trial.

METHODS

This was an 8-year follow-up study of our previously published prospective randomized study to compare clinical outcomes, survival, periprosthetic bone mineral density, migration, and wear rates of HA- and porous-coated acetabular cups. Dual X-ray absorptiometry (DXA) and Ein Bild Roentgen Analyse (EBRA) measurements were used. 100 patients who underwent unilateral cementless total hip arthroplasty were randomized to either porous-coated cups or HA-coated cups. Patients were examined preoperatively and at 3, 6, and 9 months, and also 1, 3, and 8 years after surgery. 81 patients were available for 8-year follow-up, 40 with porous-coated cups and 41 with HA-coated cups.

RESULTS

Age, sex, bone mineral density, and clinical results (Harris hip score) were similar in the 2 groups. The survival, wear, and migration patterns of the cups were also similar in both groups. The results of periprosthetic bone mineral density scans in region of interest 2 was in favor of the porous-coated cups, but there were no differences between the 2 groups in all the remaining regions of interest.

INTERPRETATION

HA coating had no statistically significant effect on clinical results, survival, wear, or migration at the 8-year follow-up.

The short and "shorter" of it: >1750 tapered titanium stems at 6- to 88-month follow-up

INTRODUCTION

Femoral fixation in THA can be achieved with different design rationales. Our hypothesis was that two short titanium flat-tapered stems would demonstrate similar stability.

METHODS

Between May 2005 and May 2012, 849 short (135-170mm), titanium flat stems ("Short") were used in THA. Between July 2005 and May 2012, 902 similar, but 35-mm shorter, stems ("Shorter") were utilized. Harris Hip Score, radiographic, and survivorship data were analyzed.

RESULTS

Survivorship of the "Short" stems was 99.1% at 7years. Eight of 849 stems have been revised: 4 for loosening, 3 for fracture, and 1 for infection. Harris Hip Score improved from 41.6 to 88.9. In the "Shorter" group, 9 of 902 have been revised: 6 for fracture/loosening, 2 for infection, and 1 for instability. HHs improved from 43.7 to 92.0. No statistically significant differences were noted in revision rate.

CONCLUSION

This comparison study of short titanium tapered stems has confirmed similar >99% survivorship in >1750 THA stems at 6- to 88 (mean 36)-month follow-up. Early periprosthetic fracture, although rare (0.5%), was more likely to occur in older patients.

In vivo testing of canine prosthetic femoral components with HA-Ti ladder-type coating on vacuum plasma-sprayed Ti substrate

The purpose of the present study was to observe the structure and functional change of the bone-coating-prosthesis interface in vivo and to evaluate the histocompatibility of self-made prosthetic femoral components in the body and the degree of their bonding with the surrounding bone tissues as well as their stability. Six mature beagle dogs underwent bilateral hip replacement with prosthetic femur components. Three groups were established in terms of different coating of prothesis (four joints in each group): atmosphere (A) plasma-sprayed pure titanium (Ti) prosthetic joint with hydroxyapatite (HA) coating (HA+Ti+A group); vacuum (V) plasma-sprayed pure Ti prosthetic joint with HA coating (HA+Ti+V group); vacuum plasma-sprayed pure Ti prosthetic joint with Ti-HA stepped coating (Ti+HAG+Ti+V group). The hip joints were functionally evaluated, and subjected to X-ray examination, biomechanics inspection, and histological examination. As a result, X-ray imaging revealed all prosthetic joints were in a good location and no dislocation of joint was found. Shear strength of interface was significantly higher in Ti+HAG+Ti+V group than in HA+Ti+V group (P<0.05) and HA+Ti+A group (P<0.05) at 28th week. Histological examination showed the amount of newborn bone in Ti+HAG+Ti+V group was more than in HA+Ti+V group and HA+Ti+A group after 28 weeks. It was suggested that vacuum plasma-sprayed pure Ti prosthetic joint with TI-HA stepped coating could improve the bonding capacity of bone-prosthesis, enhance the stability of prosthesis, and increase the fixion of prosthetic femoral components because of better bone growth. This new type of biological material in prosthetic femoral components holds promises for application in clinical practice.

Effect of lubricants on friction in laboratory tests of a total disc replacement device

Some designs of total disc replacement devices have articulating bearing surfaces, and these devices are tested in vitro with a lubricant of diluted calf serum. It is believed that the lubricant found in total disc replacement devices in vivo is interstitial fluid that may have properties between that in Ringer's solution and diluted calf serum. To investigate the effect of lubricants, a set of friction tests were performed on a generic model of a metal against metal ball-and-socket total disc replacement device. Two devices were tested: one with a ball radius of 10 mm and other with a ball radius of 16 mm; each device had a radial clearance of 0.015 mm. A spine simulator was used to measure frictional torque for each device in axial rotation, flexion-extension and lateral bending at frequencies of 0.25-2 Hz, under 1200 N axial load. Each device was tested with two different lubricants: a solution of new born calf serum diluted with deionised water and Ringer's solution. The results showed that the frictional torque generated between the bearing surfaces was significantly higher in Ringer's solution than in diluted calf serum. The use of Ringer's solution as a lubricant provides a stringent test condition to detect possible problems. Diluted calf serum is more likely to provide an environment closer to that in vivo. However, the precise properties of the fluid lubricating a total disc replacement device are not known; hence, tests using diluted calf serum may not necessarily give the same results as those obtained in vivo.

Titanium nanofeaturing for enhanced bioactivity of implanted orthopedic and dental devices

Titanium (Ti) is used as a load-bearing material in the production of orthopedic devices. The clinical efficacy of these implants could be greatly enhanced by the addition of nanofeatures that would improve the bioactivity of the implants, in order to promote in situ osteo-induction and -conduction of the patient's stem and osteoprogenitor cells, and to enhance osseointegration between the implant and the surrounding bone. Nanofeaturing of Ti is also currently being applied as a tool for the biofunctionalization of commercially available dental implants. In this review, we discuss the different nanofabrication strategies that are available to generate nanofeatures in Ti and the cellular response to the resulting nanofeatures. In vitro research, in vivo studies and clinical trials are considered, and we conclude with a perspective about the future potential for use of nanotopographical features in a therapeutic setting.

Good short-term outcome of primary total hip arthroplasty with cementless bioactive glass ceramic bottom-coated implants: 109 hips followed for 3–9 years

BACKGROUND AND PURPOSE

Cementless total hip arthroplasty is currently favored by many orthopedic surgeons. The design of the porous surface is critically important for long-term fixation. We examined the clinical and radiographic outcome of the cementless titanium hip implant with a bottom coating of apatite-wollastonite containing bioactive glass ceramic.

METHODS

We retrospectively reviewed 109 hips (92 patients) that had undergone primary cementless total hip arthroplasty with bioactive glass ceramic bottom-coated implants. The mean follow-up period was 7 (3-9) years. Hip joint function was evaluated with the Merle d'Aubigné and Postel hip score, and radiographic changes were determined from anteroposterior radiographs.

RESULTS

The mean hip score improved from 9.7 preoperatively to 17 at the final follow-up. The overall survival rate was 100% at 9 years, when radiographic loosening or revision for any reason was used as the endpoint. 3 stems in 2 patients subsided more than 3 mm vertically within 1 year after implantation. Radiographs of the interface of the stem and femur were all classified as bone ingrowth fixation.

CONCLUSIONS

The short-term results of this study show good outcome for cementless implants with a bottom coating of apatite-wollastonite containing bioactive glass ceramic.

Calcium orthophosphate coatings, films and layers

In surgical disciplines, where bones have to be repaired, augmented or improved, bone substitutes are essential. Therefore, an interest has dramatically increased in application of synthetic bone grafts. As various interactions among cells, surrounding tissues and implanted biomaterials always occur at the interfaces, the surface properties of the implants are of the paramount importance in determining both the biological response to implants and the material response to the physiological conditions. Hence, a surface engineering is aimed to modify both the biomaterials, themselves, and biological responses through introducing desirable changes to the surface properties of the implants but still maintaining their bulk mechanical properties. To fulfill these requirements, a special class of artificial bone grafts has been introduced in 1976. It is composed of various mechanically stable (therefore, suitable for load bearing applications) biomaterials and/or bio-devices with calcium orthophosphate coatings, films and layers on their surfaces to both improve interactions with the surrounding tissues and provide an adequate bonding to bones. Many production techniques of calcium orthophosphate coatings, films and layers have been already invented and new promising techniques are continuously investigated. These specialized coatings, films and layers used to improve the surface properties of various types of artificial implants are the topic of this review.

Antibacterial and biological characteristics of silver containing and strontium doped plasma sprayed hydroxyapatite coatings

Infection in primary total joint prostheses is estimated to occur in up to 3% of all surgery. As a measure to improve the antimicrobial properties of implant materials silver (Ag) was incorporated into plasma sprayed hydroxyapatite (HA) coatings. To offset potential cytotoxic effects of Ag in the coatings strontium (Sr) was also added as a binary dopant. HA powder was doped with 2.0 wt.% Ag(2)O, 1.0 wt.% SrO and was then heat treated at 800 °C. Titanium substrates were coated using a 30 kW plasma spray system equipped with a supersonic nozzle. X-ray diffraction confirmed the phase purity and high crystallinity of the coatings. Samples were evaluated for mechanical stability by adhesive bond strength testing. The results show that the addition of dopants did not affect the overall bond strength of the coatings. The antibacterial efficacies of the coatings were tested against Pseudomonas aeruginosa. Samples that contained the Ag(2)O dopant were found to be highly effective against bacterial colonization. In vitro cell-material interactions using human fetal osteoblast cells were characterized by 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide assay for cell viability, field emission scanning electron microscopy for cell morphology and confocal imaging for the important differentiation marker alkaline phosphatase (ALP). Our results showed evidence of cytotoxic effects of the Ag-HA coatings, characterized by poor cellular morphology and cell death and nearly complete loss of functional ALP activity. The addition of SrO to the Ag-HA coatings was able to effectively offset these negative effects and improve performance compared with pure HA-coated samples.