Electrochemical glucose biosensor based on nickel oxide nanoparticle-modified carbon paste electrode

Promoting DNA Adsorption by Acids and Polyvalent Cations: Beyond Charge Screening

Adsorbing DNA oligonucleotides onto nanoparticles is the first step in developing DNA-based biosensors, drug delivery systems, and smart materials. Since DNA is a polyanion, it is repelled by negatively charged nanoparticles, which constitute the majority of commonly used nanomaterials. Adding salt such as NaCl to screen charge repulsion is a standard method of promoting DNA adsorption. However, Na⁺ does not supply additional attractive forces. In addition, adding a high concentration of NaCl can cause the aggregation of nanomaterials. In this feature article, we mainly summarize the methods developed in our laboratory to promote DNA adsorption by lowering the pH and by adding polyvalent metal ions, especially transition-metal ions. Various materials including noble metals (gold, silver, and platinum), 2D materials (graphene oxide, MoS₂, WS₂, and MXene), polydopamine, and several metal oxides are discussed. In general, low pH can protonate DNA bases and nanoparticle surfaces, reducing charge repulsion and even leading to attraction, although DNA folding at low pH can sometimes be detrimental to adsorption. Polyvalent metal ions can bridge additional interactions to achieve otherwise impossible adsorption. On the basis of the current understanding, a few future research directions are proposed to further improve DNA adsorption.

Amperometric determination of heavy metal using an HRP inhibition biosensor based on ITO nanoparticles-ruthenium (III) hexamine trichloride composite: Central composite design optimization

A novel horseradish peroxidase (HRP) enzyme inhibition biosensor based on indium tin oxide (ITO) nanoparticles, hexaammineruthenium (III) chloride (RUT), and chitosan (CH) modified glassy carbon electrode (GCE) was developed. The biosensor fabrication process was investigated using scanning electron microscopy, energy-dispersive X-ray spectroscopy, cyclic voltammetry, and electrochemical impedance spectroscopy. The amounts of ITO nanoparticles and RUT were optimized using a 2² central composite design for the optimization of electrode composition. The detection limits were determined as 8 nM, 3 nM, and 1 nM for Pb²⁺, Ni²⁺, and Cd²⁺, respectively. The inhibition calibration curves of the biosensor were found to be within the range of 0.009-0.301 µM with a sensitivity of 11.97 µA µM^-1 cm^-2 (0.85 µA µM^-1) for Pb²⁺, 0.011-0.368 µM with a sensitivity of 10.84 µA µM^-1 cm^-2 (0.77 µA µM^-1) for Ni²⁺, and 0.008-0.372 µM with a sensitivity of 10.99 µA µM^-1 cm^-2 (0.78 µA µM^-1) for Cd²⁺. The type of HRP inhibition by Pb²⁺, Ni²⁺ and Cd²⁺ was investigated by the Dixon and Cornish-Bowden plots. The effects of possible interfering species on the biosensor response were examined. The analysis of Pb²⁺, Ni²⁺, and Cd²⁺ in tap water was demonstrated using the HRP/ITO-RUT-CH/GCE with satisfactory experimental results. The proposed method agreed with the atomic absorption spectrometry results.

Nanomolar level sensing of glucose in food samples using glucose oxidase confined MWCNT-Inulin-TiO2 bio-nanocomposite

Development of an effective sensor for sensing glucose in commercially available "sugar free" food products is important as people are becoming diabetic health conscious. Although multi-walled carbon nanotubes (MWCNTs) possess interesting electrical properties, their hydrophobic nature limits their applications. Their hydrophilicity can be improved through modification. In the present study, Inulin, that was isolated from Allium sativum L. using hot water diffusion and incorporated with titanium dioxide (TiO₂), was used for the modification of MWCNTs. The as-synthesized MWCNT-Inulin-TiO₂ bio-nanocomposite immobilized with glucose oxidase (GOx) was incorporated into the carbon paste matrix and was utilized for the sensing of glucose in food products. Differential pulse voltammetric studies revealed that the fabricated electrode demonstrated good linear range (1.6 nM to 1 μM) and was sensitive to nanomolar concentrations of glucose with a very low limit of detection up to 0.82 nM and exhibited a long term stability of 150 days.

Fabrication of Flexible Arrayed Lactate Biosensor Based on Immobilizing LDH-NAD⁺ on NiO Film Modified by GO and MBs

We proposed the flexible arrayed lactate biosensor based on immobilizing l-lactate dehydrogenase (LDH) and nicotinamide adenine dinucleotide (NAD+) on nickel oxide (NiO) film, and which the average sensitivity could be enhanced by using graphene oxide (GO) and magnetic beads (MBs). By using GO and MBs, it exhibits excellent sensitivity (45.397 mV/mM) with a linearity of 0.992 in a range of 0.2 mM to 3 mM. According to the results of electrochemical impedance spectroscopy (EIS), the electron transfer resistance of LDH-NAD+-MBs/GPTS/GO/NiO film was smaller than those of LDH-NAD⁺/GPTS/GO/NiO film and LDH-NAD+/GPTS/NiO film, and it presented the outstanding electron transfer ability. After that, the limit of detection, anti-interference effect and bending test were also investigated.

Graphene hybrids: synthesis strategies and applications in sensors and sensitized solar cells

Graphene exhibits unique 2-D structural, chemical, and electronic properties that lead to its many potential applications. In order to expand the scope of its usage, graphene hybrids which combine the synergetic properties of graphene along with metals/metal oxides and other nanostructured materials have been synthesized and are a widely emerging field of research. This review presents an overview of the recent progress made in the field of graphene hybrid architectures with a focus on the synthesis of graphene-carbon nanotube (G-CNT), graphene-semiconductor nanomaterial (G-SNM), and graphene-metal nanomaterial (G-MNM) hybrids. It attempts to identify the bottlenecks involved and outlines future directions for development and comprehensively summarizes their applications in the field of sensing and sensitized solar cells.