Heparin removal from human plasma using molecular imprinted cryogels

Cryogels and Monoliths: Promising Tools for Chromatographic Purification of Nucleic Acids

The increasing demand for highly pure biopharmaceuticals has put significant pressure on the biotechnological industry to innovate in production and purification processes. Nucleic acid purification, crucial for gene therapy and vaccine production, presents challenges due to the unique physical and chemical properties of these molecules. Meeting regulatory standards necessitates large quantities of biotherapeutic agents of high purity. While conventional chromatography offers versatility and efficiency, it suffers from drawbacks like low flow rates and binding capacity, as well as high mass transfer resistance. Recent advancements in continuous beds, including monoliths and cryogel-based systems, have emerged as promising solutions to overcome these limitations. This review explores and evaluates the latest progress in chromatography utilizing monolithic and cryogenic supports for nucleic acid purification.

Pterostilbene loaded poly(vinyl alcohol)-gelatin cryogels as potential bioactive wound dressing material

Cryogels are support materials which are good at mimicking extracellular matrix due to their excellent hydrophilicity, biocompatibility, and macroporous structure, thus they are useful in facilitating cell activities during healing process. In this study, polyvinyl alcohol-gelatin (PVA-Gel) based cryogel membranes loaded with pterostilbene (trans-3,5-dimethoxy-4-hydroxystilbene; PTS) (PVA-Gel/PTS) was synthesized as wound dressing materials. PVA-Gel and PVA-Gel/PTS were synthesized with the polymerization yields of 96% ± 0.23% and 98% ± 0.18%, respectively, and characterized by swelling tests, Brunauer-Emmett-Teller (BET) and scanning electron microscopy (SEM) analysis. The swelling ratios were calculated as 98.6% ± 4.93% and 102% ± 5.1%, macroporosities were determined as 85% ± 2.13% and 88% ± 2.2%, for PVA-Gel and PVA-Gel/PTS, respectively. It was determined that PVA-Gel and PVA-Gel/PTS have 17 m² /g ± 0.76 m² /g and 20 m² /g ± 0.92 m² /g surface areas, respectively. SEM studies were demonstrated that they have ~100 μm pore sizes. According to 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT), trypan blue exclusion and live-dead assay results, it was observed that cell proliferation, cell number and cell viability were higher in PVA-Gel/PTS cryogel at 24, 48, and 72 h compared to PVA-Gel. A strong and transparent fluorescent light intensity was observed indicating higher cell population in PVA-Gel/PTS in comparison with PVA-Gel, according to 4',6-diamidino-2-phenylindole (DAPI) staining. SEM, F-Actin, Giemsa staining and inverted-phase microscope image of fibroblasts in PVA-Gel/PTS cryogels revealed that dense fibroblast proliferation and spindle-shaped morphology of cells were preserved. Moreover, DNA agarose gel data demonstrated that PVA-Gel/PTS cryogels had no effect on DNA integrity. Consequently, produced PVA-Gel/PTS cryogel can be used as wound dressing material to promote wound therapies, inducing cell viability and proliferation.

Enhanced laccase separation from fermentation medium using cryogel columns

The laccase enzyme family belongs to the oxidoreductase enzyme class and is one of the most commercially valuable enzymes that catalyzes the oxidation of one electron of a wide range of phenolic compounds. Separation and purification of laccases are crucial for industry since they play an important role in dye decolorization, biodegradation and food processing. Therefore, developing effective, high yielding and cost-effective methods for laccase production is vital. In this study, it was aimed to prepare cryogel columns for laccase purification following the bioproduction of laccase via Aspergillus niger. 2-hydroxyethyl methacrylate based cryogels were synthesized in the presence of 1-vinylimidazole as the affinity ligand and characterized by swelling tests, Brunauer-Emmett-Teller surface area measurement and scanning electron microscopy analysis. Surface area and water uptake ratio of cryogel columns were 35 m²/g and 93 %, respectively. The effect of pH, equilibrium laccase concentration, flow rate, interaction time and temperature on laccase adsorption were examined. The purification factor was calculated as 10.53 under optimum conditions and the enzyme recovery was found to be 86.7 % from fermentation medium. Current study revealed that laccase purification using cryogels following filtration of fermentation medium could be a promising candidate for industrial applications with eliminating the need for complex chromatographic steps.

Synthesis of Double-Layer Imprinted Polymers: BSA Depletion

A sensitive, rapid, and cost-effective method for quantitative analysis of proteins (e.g., detection, purification, depletion) for a wide variety of purposes is required in a number of areas, such as immunodiagnostics and biotechnology. Double-layer imprinting technique, which is carried out via polymerization of polymer solution with higher monomer concentration, covering and filling the supermacroporous structure of a pre-synthesized cryogel column with a lower monomer concentration, thus improving the surface area and adsorption capacity of final product, is a brand new approach for the application of cryogels in molecular imprinting technology. Within the scope of this chapter, BSA is selected as a model protein for the application of double-layer imprinting protocol. In this chapter, synthesis of double-layer BSA-imprinted and non-imprinted cryogel columns (BSA-DLIP and DLNIP, respectively) are described. In addition, characterization of synthesized columns and BSA depletion studies from aqueous solutions are described in detail, as well as selectivity of BSA-DLIPs for BSA, against competitors.

Molecularly imprinted spongy columns for Angiotensin(II) recognition from human serum

Angiotensin II (AngII), the effector peptide of the renin angiotensin system and has an important role in regulating cardiovascular hemodynamics and structure. AngII is an important biomarker for certain diseases that are associated with cardiovascular disorders, i.e., influenza, SARS‐CoV‐2, tumors, hypertension, etc. However, AngII presents in blood in very low concentrations and they are not stable due to their reactivity, therefore spontaneous detection of AngII is a big challenge. In this study, AngII‐imprinted spongy columns (AngII‐misc) synthesized for AngII detection from human serum, and characterized by surface area measurements (BET), swelling tests, scanning electron microscopy (SEM), FTIR studies. AngII binding studies were achieved from aqueous environment and maximum binding capacity was found as 0.667 mg/g. It was calculated that the AngII‐miscs recognized AngII 8.27 and 14.25 times more selectively than competitor Angiotensin I and Vasopressin molecules. Newly produced AngII‐misc binds 60.5 pg/g AngII from crude human serum selectively. It has a great potential for spontaneous detection of AngII from human serum for direct and critical measurements in serious diseases, that is, heart attacks, SARS‐CoV‐2, etc.

Determination of mold contamination using ergosterol imprinted particles

Ergosterol is a key biochemical marker for fungal mycelial growth. In this study, molecularly ergosterol imprinted particles (Erg-MIPs) were newly synthesized for the selective detection of ergosterol in mold samples. Erg-MIPs were characterized via scanning electron microscopy, swelling studies, and surface area measurements. Maximum selective ergosterol adsorption achieved as 28.50 mg/g Erg-MIP. Selectivity studies showed that Erg-MIPs adsorbed Erg 2.01 and 3.27 times higher than that of cholesterol and stigmasterol, respectively. Erg adsorption from Aspergillus niger was found as 23.87 mg/g. Reusability of Erg-MIPs was studied and decrease in Erg adsorption capacity of the particles was negligible (3%). Erg-MIPs are good affinity materials for the selective Erg detection from food samples, prior to use in food industry.

Molecularly Imprinted Materials for Selective Biological Recognition

Molecular imprinting is an approach of generating imprinting cavities in polymer structures that are compatible with the target molecules. The cavities have memory for shape and chemical recognition, similar to the recognition mechanism of antigen-antibody in organisms. Their structures are also called biomimetic receptors or synthetic receptors. Owing to the excellent selectivity and unique structural predictability of molecularly imprinted materials (MIMs), practical MIMs have become a rapidly evolving research area providing key factors for understanding separation, recognition, and regenerative properties toward biological small molecules to biomacromolecules, even cell and microorganism. In this review, the characteristics, morphologies, and applicability of currently popular carrier materials for molecular imprinting, especially the fundamental role of hydrogels, porous materials, hierarchical nanoparticles, and 2D materials in the separation and recognition of biological templates are discussed. Moreover, through a series of case studies, emphasis is given on introducing imprinting strategies for biological templates with different molecular scales. In particular, the differences and connections between small molecular imprinting (bulk imprinting, "dummy" template imprinting, etc.), large molecular imprinting (surface imprinting, interfacial imprinting, etc.), and cell imprinting strategies are demonstrated in detail. Finally, future research directions are provided.

Biomedical Applications of Polymeric Cryogels

The application of interconnected supermacroporous cryogels as support matrices for the purification, separation and immobilization of whole cells and different biological macromolecules has been well reported in literature. Cryogels have advantages over traditional gel carriers in the field of biochromatography and related biomedical applications. These matrices nearly mimic the three-dimensional structure of native tissue extracellular matrix. In addition, mechanical, osmotic and chemical stability of cryogels make them attractive polymeric materials for the construction of scaffolds in tissue engineering applications and in vitro cell culture, separation materials for many different processes such as immobilization of biomolecules, capturing of target molecules, and controlled drug delivery. The low mass transfer resistance of cryogel matrices makes them useful in chromatographic applications with the immobilization of different affinity ligands to these materials. Cryogels have been introduced as gel matrices prepared using partially frozen monomer or polymer solutions at temperature below zero. These materials can be produced with different shapes and are of interest in the therapeutic area. This review highlights the recent advances in cryogelation technologies by emphasizing their biomedical applications to supply an overview of their rising stars day to day.

Controlled release of mitomycin C from PHEMAH-Cu(II) cryogel membranes

Molecular imprinting technique was used for the preparation of antibiotic and anti-neoplastic chemotherapy drug (mitomycin C) imprinted cryogel membranes (MMC-ICM). The membranes were synthezied by using metal ion coordination interactions with N-methacryloyl-(l)-histidine methyl ester (MAH) functional monomer and template molecules (i.e. MMC). The 2-hydroxyethyl methacrylate (HEMA) monomer and methylene bisacrylamide (MBAAm) crosslinker were used for the preparation of mitomycin C imprinted cryogel membranes by radical suspension polymerization technique. The imprinted cryogel membranes were characterized by scanning electron microscopy (SEM), Brunauer-Emmett-Teller (BET), Fourier transform infrared spectroscopy-attenuated total reflectance (FTIR-ATR) and swelling degree measurements. Cytotoxicity of MMC-ICMs was investigated using mouse fibroblast cell line L929. Time-dependent release of MMC was demonstrated within 150 h from cryogel membranes. Cryogels demonstrated very high MMC loading efficiency (70-80%) and sustained MMC release over hours.

Molecularly imprinted cryogels for chondroitin sulfate recognition

Chondroitin sulfate (Cs)-imprinted poly(hydroxyethyl methacrylate)-based macroporous cryogels (CsMIP) were prepared for selective recognition of Cs from an aqueous solution. The selective binding sites for Cs were maintained using vinyl imidazole-Cu(2+) functional groups, during the precomplexation step in the polymerization procedure. Newly synthesized CsMIP cryogel columns were characterized. The separation of Cs from aqueous solutions was studied, both in the continuous system and in the fast protein liquid chromatography (FPLC) system. According to the FPLC studies, the Rs value obtained was 14.72, which shows that the CsMIP cryogel column can successfully separate Cs from aqueous solutions of Cs in the presence of competitor molecules.