Necrotic regions are absent in fiber-shaped cell aggregates, approximately 100 μm in diameter

Improved Neural Inductivity of Size-Controlled 3D Human Embryonic Stem Cells Using Magnetic Nanoparticles

Background: To improve the efficiency of neural development from human embryonic stem cells, human embryoid body (hEB) generation is vital through 3-dimensional formation. However, conventional approaches still have limitations: long-term cultivation and laborious steps for lineage determination. Methods: In this study, we controlled the size of hEBs for ectodermal lineage specification using cell-penetrating magnetic nanoparticles (MNPs), which resulted in reduced time required for initial neural induction. The magnetized cells were applied to concentrated magnetic force for magnet-derived multicellular organization. The uniformly sized hEBs were differentiated in neural induction medium (NIM) and suspended condition. This neurally induced MNP-hEBs were compared with other groups. Results: As a result, the uniformly sized MNP-hEBs in NIM showed significantly improved neural inductivity through morphological analysis and expression of neural markers. Signaling pathways of the accelerated neural induction were detected via expression of representative proteins; Wnt signaling, dopaminergic neuronal pathway, intercellular communications, and mechanotransduction. Consequently, we could shorten the time necessary for early neurogenesis, thereby enhancing the neural induction efficiency. Conclusion: Overall, this study suggests not only the importance of size regulation of hEBs at initial differentiation stage but also the efficacy of MNP-based neural induction method and stimulations for enhanced neural tissue regeneration.

Co-culture engineering: a promising strategy for production of engineered extracellular vesicle for osteoarthritis treatment

The therapeutic effects of extracellular vesicles (EVs) have been identified as a significant factor in intercellular communication in different disease treatments, including osteoarthritis (OA). Compared to the conventional approaches in treating OA, EV therapy is a non-invasive and cell-free method. However, improving the yield of EVs and their therapeutic effects are the main challenges for clinical applications. In this regard, researchers are using the EV engineering potential to overcome these challenges. New findings suggest that the co-culture strategy as an indirect EV engineering method efficiently increases EV production and quality. The co-culture of mesenchymal stem cells (MSCs) and chondrocytes has improved their chondrogenesis, anti-inflammatory effects, and regenerative properties which are mediated by EVs. Hence, co-culture engineering by considerable systems could be useful in producing engineered EVs for different therapeutic applications. Here, we review various co-culture approaches, including diverse direct and indirect, 2D and 3D cell cultures, as well as static and dynamic systems. Meanwhile, we suggest and discuss the advantages of combined strategies to achieve engineered EVs for OA treatment.

Alginate microfibers as therapeutic delivery scaffolds and tissue mimics

Alginate, a naturally occurring polysaccharide, has been widely used in cell encapsulation, 3D culture, cell therapy, tissue engineering, and regenerative medicine. Alginate's frequent use comes from its biocompatibility and ability to easily form hydrogel in a variety of forms (e.g. microcapsules, microfibers, and porous scaffolds), which can provide immunoprotection for cell therapy and mimic the extracellular matrix for tissue engineering. During the past 15 years, alginate hydrogel microfibers have attracted more and more attention due to its continuous thin tubular structures (diameter or shell thickness ⩽ 200 µm), high-density cell growth, high handleability and retrievability, and scalability. This review article provides a concise overview of alginate and its resultant hydrogel microfibers for the purpose of promoting multidisciplinary, collaborative, and convergent research in the field. It starts with a historical review of alginate as biomaterials and provides basics about alginate structure, properties, and mechanisms of hydrogel formation, followed by current challenges in effective cell delivery and functional tissue engineering. In particular, this work discusses how alginate microfiber technology could provide solutions to unmet needs with a focus on the current state of the art of alginate microfiber technology and its applications in 3D cell culture, cell delivery, and tissue engineering. At last, we discuss future directions in the perspective of alginate-based advanced technology development in biology and medicine.

Transplantable human motor networks as a neuron-directed strategy for spinal cord injury

To repair neural circuitry following spinal cord injury (SCI), neural stem cell (NSC) transplantation has held a primary focus; however, stochastic outcomes generate challenges driven in part by NSC differentiation and tumor formation. The recent ability to generate regionally specific neurons and their support cells now allows consideration of directed therapeutic approaches with pre-differentiated and networked spinal neural cells. Here, we form encapsulated, transplantable neuronal networks of regionally matched cervical spinal motor neurons, interneurons, and oligodendrocyte progenitor cells derived through trunk-biased neuromesodermal progenitors. We direct neurite formation in alginate-based neural ribbons to generate electrically active, synaptically connected networks, characterized by electrophysiology and calcium imaging before transplantation into rodent models of contused SCI for evaluation at 10-day and 6-week timepoints. The in vivo analyses demonstrate viability and retention of interconnected synaptic networks that readily integrate with the host parenchyma to advance goals of transplantable neural circuitry for SCI treatment.

•

Neuromesodermal progenitor derivation of human spinal neurons as therapeutic cells

•

Neural ribbons bridge in vitro network formation and in vivo host transplantation

•

In vivo visualization of encapsulated graft placement with magnetic resonance imaging

•

Six-week viability of human neuronal networks with OPCs in rat contusion SCI

Predictable fabrication of pre-made alginate hydrogel microtubes for stem cell aggregation using needle-in-needle devices

Alginate hydrogels in microtubular structures have great potential to advance three-dimensional (3D) culture, organoid formation, tissue engineering, and cell therapy. To address the need of fabricating consistent, stable hydrogel microtubes for efficient large organoid generation in a simple and quick manner, we have designed needle-in-needle devices to fabricate alginate hydrogel microtubes without any dead volume of the cell-alginate mixture and demonstrated the feasibility of injecting and culturing embryoid bodies in these pre-made hydrogel microtubes. We further used a reverse engineering approach to find out the optimal flow rates and alginate concentration for fabricating pre-made hydrogel microtubes with desired diameter using particular sets of needle-in-needle devices. We established the relationship of the alginate flow rate with diameter and wall thickness of the microtube using mathematic modeling. It offers a way to determine the flow rate for making microtubes with the desired dimension. Additionally, we evaluated the effect of CaCl2concentration on the diameter as well as stem cell viability. At last, we demonstrated the capacity of fabricating hydrogel microtubes of varying diameters using three sets of needle-in-needle devices and evaluated stem cell growth in these hydrogel microtubes. It provides a new avenue to accessible, repeatable, scalable, and easy to use pre-made 'off-the-shelf' hydrogel microtubes for 3D cell culture including, but not limiting to stem cells.

Fabrication of homotypic neural ribbons as a multiplex platform optimized for spinal cord delivery

Cell therapy for the injured spinal cord will rely on combined advances in human stem cell technologies and delivery strategies. Here we encapsulate homotypic spinal cord neural stem cells (scNSCs) in an alginate-based neural ribbon delivery platform. We perform a comprehensive in vitro analysis and qualitatively demonstrate graft survival and injury site retention using a rat C4 hemi-contusion model. Pre-configured neural ribbons are transport-stable modules that enable site-ready injection, and can support scNSC survival and retention in vivo. Neural ribbons offer multifunctionality in vitro including co-encapsulation of the injury site extracellular matrix modifier chondroitinase ABC (chABC), tested here in glial scar models, and ability of cervically-patterned scNSCs to differentiate within neural ribbons and project axons for integration with 3-D external matrices. This is the first extensive in vitro characterization of neural ribbon technology, and constitutes a plausible method for reproducible delivery, placement, and retention of viable neural cells in vivo.

Enhanced multi-lineage differentiation of human mesenchymal stem/stromal cells within poly(N-isopropylacrylamide-acrylic acid) microgel-formed three-dimensional constructs

Human mesenchymal stem/stromal cells (hMSCs) are a potential cell source of stem cell therapy for many serious diseases and hMSC spheroids have emerged to replace single cell suspensions for cell therapy. Three-dimensional (3D) scaffolds or hydrogels which can mimic properties of the extracellular matrix (ECM) have been widely explored for their application in tissue regeneration. However, there are considerably less studies on inducing differentiation of hMSC spheroids using 3D scaffolds or hydrogels. This study is the first to explore multi-lineage differentiation of a stem cell line and primary stem cells within poly(N-isopropylacrylamide) (p(NIPAAm))-based thermosensitive microgel-formed constructs. We first demonstrated that poly(N-isopropylacrylamide-co-acrylic acid) (p(NIPAAm-AA)) was not toxic to hMSCs and the microgel-formed constructs facilitated formation of uniform stem cell spheroids. Due to functional enhancement of cell spheroids, hMSCs within the 3D microgel-formed constructs were induced for multi-lineage differentiation as evidenced by significant up-regulation of messenger RNA (mRNA) expression of chondrogenic and osteogenic genes even in the absence of induction media on day 9. When induction media were in situ supplied on day 9, mRNA expression of chondrogenic, osteogenic and adipogenic genes within the microgel-formed constructs were significantly higher than that in the pellet and 2D cultures, respectively, on day 37. In addition, histological and immunofluorescent images also confirmed successful multi-lineage differentiation of hMSCs within the 3D microgel-formed constructs. Hence, the thermosensitive p(NIPAAm-AA) microgel can be potentially used in an in vitro model for cell differentiation or in vivo transplantation of pre-differentiated human mesenchymal stromal cells into patients for specific lineage differentiation.

3D brown adipogenesis to create "Brown-Fat-in-Microstrands"

The ability of brown adipocytes (fat cells) to dissipate energy as heat shows great promise for the treatment of obesity and other metabolic disorders. Employing pluripotent stem cells, with an emphasis on directed differentiation, may overcome many issues currently associated with primary fat cell cultures. In addition, three-dimensional (3D) cell culture systems are needed to better understand the role of brown adipocytes in energy balance and treating obesity. To address this need, we created 3D "Brown-Fat-in-Microstrands" by microfluidic synthesis of alginate hydrogel microstrands that encapsulated cells and directly induced cell differentiation into brown adipocytes, using mouse embryonic stem cells (ESCs) as a model of pluripotent stem cells, and brown preadipocytes as a positive control. Brown adipocyte differentiation within microstrands was confirmed by immunocytochemistry and qPCR analysis of the expression of the brown adipocyte-defining marker uncoupling protein 1 (UCP1), as well as other general adipocyte markers. Cells within microstrands were responsive to a β-adrenergic agonist with an increase in gene expression of thermogenic UCP1, indicating that these "Brown-Fat-in-Microstrands" are functional. The ability to create "Brown-Fat-in-Microstrands" from pluripotent stem cells opens up a new arena to understanding brown adipogenesis and its implications in obesity and metabolic disorders.