Tensiometric and rheological investigations of single and mixed systems consisting of cocamidopropyl betaine (CAPB) and sodium dodecyl benzene sulfonate (SDBS) in aqueous solutions

The surface tension (σ), critical micelle concentration (CMC), surface excess (Γ), minimum area occupied by a surfactant molecule (A min), the viscosity and oscillatory rheological studies of aqueous solutions containing cocamidopropyl betaine (CAPB) and sodium dodecylbenzene sulfonate (SDBS) at molar fractions of 0.00, 0.25, 0.50, 0.75 and 1.00 and 25 °C were presented. CAPB and SDBS were not found to interact synergistically in water at any of the molar fractions studied. This is due to the fact that the critical micelle concentrations of these mixtures were higher than those predicted by Clint’s equation, indicating an antagonism that rarely occurs in mixed amphoteric/anionic surfactant systems. The minimum area occupied by a surfactant molecule (A min) was reduced in CAPB/SDBS mixtures compared to unmixed surfactants. In contrast, the viscosity of the mixed CAPB/SDBS system increased significantly from 1.0 mPa s to a maximum of 36.0 Pa s at higher CAPB mole fractions (0.5–0.8). The rheograms obtained from the oscillation measurements of the viscous CAPB/SDBS solutions are characteristic of wormlike micelles (WLMs) according to the Maxwell model. The results of this surprising binary CAPB/SDBS surfactant mixing system are presented and discussed.

Dilute hydrochloric acid induced switching from antagonism to synergism in the binary mixed systems of cocamidopropyl betaine (CAPB) and sodium dodecyl benzene sulfonate (SDBS)

A synergism is reported in the binary mixtures of cocamidopropyl betaine (CAPB) and sodium dodecyl benzene sulfonate (SDBS) at mole fractions of 0.25, 0.50, and 0.75, in dilute hydrochloric acid solutions (∼0.05 M) HCl, at 25 °C. Such synergism is confirmed by surface tension values, critical micelle concentration (CMC), and interaction parameter values according to Holland and Rubingh’s model and the satisfaction of Hua and Rosen conditions. Surface excess (Γ) at air/water interface and the minimum area occupied by surfactant molecule (A min) also indicated a reduction in the A min of mixed CAPB/SDBS compared to single surfactants that is due to the strong electrostatic interaction between surfactants heads. The composition of CAPB/SDBS mixed micelles, the interaction parameter (β) and the micellar activity coefficients (f 1 and f 2) were evaluated from the regular solution model for these binary amphoteric/anionic mixed systems. It is clear the CAPB surfactants are converted to the cationic form by charging in the presence of HCl, which enhances the interaction between the oppositely charged CAPB and SDBS heads and overcomes the unfavourable packing between the tails predicted in pure water. Such strong interaction was also reflected on the phase behavior of CAPB/SDBS binary mixed system. Accordingly, a switching from antagonism to synergism is reported for CAPB/SDBS binary mixed system in the presence of dilute hydrochloric acid.

Application of Newly Synthesized Sulfobetaine Based on Sweet Almond Oil in Bath Liquids for Sensitive Skin

Three formulations for bath liquids were developed, differing in the type of amphoteric surfactant applied. The formulations used Cocamidopropyl Betaine, Cocamidpropyl Hydroxide and newly synthesized sulfobetaine based on sweet almond oil (Oleicamidopropyl Sultaine). The molecular structure of the surfactant used in the manufactured formulations has a negatively charged sulfonate group and a positively charged quaternary nitrogen atom. Such molecular structures suggest that the functional properties of this substance are mild. Based on the research, it was found that the bath fluid containing the newly synthesized sulfobetaine based on sweet almond oil had the lowest zein number, the lowest pH increase of bovine albumin solution and the lowest ability to emulsify fatty dirt. This indicates a very low irritant effect of the tested bath liquid.

Bioactive Properties of Nanofibres Based on Concentrated Collagen Hydrolysate Loaded with Thyme and Oregano Essential Oils

This research aimed to obtain biocompatible and antimicrobial nanofibres based on concentrated collagen hydrolysate loaded with thyme or oregano essential oils as a natural alternative to synthesis products. The essential oils were successfully incorporated using electrospinning process into collagen resulting nanofibres with diameter from 471 nm to 580 nm and porous structure. The presence of essential oils in collagen nanofibre mats was confirmed by Attenuated Total Reflectance -Fourier Transform Infrared Spectroscopy (ATR-FTIR), Ultraviolet-visible spectroscopy (UV-VIS) and antimicrobial activity. Scanning Electron Microscopy with Energy Dispersive Spectroscopy analyses allowed evaluating the morphology and constituent elements of the nanofibre networks. Microbiological tests performed against Staphylococcus aureus, Escherichia coli, Pseudomonas aeruginosa and Candida albicans showed that the presence of essential oils supplemented the new collagen nanofibres with antimicrobial properties. The biocompatibility of collagen and collagen with essential oils was assessed by in vitro cultivation with NCTC clone 929 of fibroblastic cells and cell viability measurement. The results showed that the collagen and thyme or oregano oil composites have no cytotoxicity up to concentrations of 1000 μg·mL^-1 and 500 μg mL^-1, respectively. Optimization of electrospinning parameters has led to the obtaining of new collagen electrospun nanofibre mats loaded with essential oils with potential use for wound dressings, tissue engineering or protective clothing.