Asymptomatic Construct Failure after Metastatic Spine Tumor Surgery: A New Entity or a Continuum with Symptomatic Failure?

Design and 3D printing of novel titanium spine rods with lower flexural modulus and stiffness profile with optimised imaging compatibility

PURPOSE

To manufacture and test 3D printed novel design titanium spine rods with lower flexural modulus and stiffness compared to standard solid titanium rods for use in metastatic spine tumour surgery (MSTS) and osteoporosis.

METHODS

Novel design titanium spine rods were designed and 3D printed. Three-point bending test was performed to assess mechanical performance of rods, while a French bender was used to assess intraoperative rod contourability. Furthermore, 3D printed spine rods were tested for CT & MR imaging compatibility using phantom setup.

RESULTS

Different spine rod designs generated includes shell, voronoi, gyroid, diamond, weaire-phelan, kelvin, and star. Tests showed 3D printed rods had lower flexural modulus with reduction ranging from 2 to 25% versus standard rod. Shell rods exhibited highest reduction in flexural modulus of 25% (~ 77.4 GPa) and star rod exhibited lowest reduction in flexural modulus of 2% (100.8GPa). 3D printed rod showed reduction in stiffness ranging from 40 to 59%. Shell rod displayed highest reduction in stiffness of 59% (179.9 N/mm) and gyroid had least reduction in stiffness of 40% (~ 259.2 N/mm). Rod bending test showed that except gyroid, other rod designs demonstrated lesser bending difficulty versus standard rod. All 3D printed rods demonstrated improved CT/MR imaging compatibility with reduced artefacts versus standard rod.

CONCLUSION

By utilising novel design approach, we successfully generated a spine rod design portfolio with lower flexural modulus/stiffness profile and better CT/MR imaging compatibility for potential use in MSTS/other conditions such as osteoporosis. Thus, exploration of new rod designs in surgical application could enhance treatment outcome and improve quality of life for patients.

Factors affecting the prognosis of recovery of motor power and ambulatory function after surgery for metastatic epidural spinal cord compression

OBJECTIVE

Metastatic epidural spinal cord compression (MESCC) causes neurological deficits that may hinder ambulation. Understanding the prognostic factors associated with increased neurological recovery and regaining ambulatory functions is important for surgical planning in MESCC patients with neurological deficits. The present study was conducted to elucidate prognostic factors of neurological recovery in MESCC patients.

METHODS

A total of 192 patients who had surgery for MESCC due to preoperative neurological deficits were reviewed. A motor recovery rate ≥ 50% and ambulatory function restoration were defined as the primary favorable endpoints. Factors associated with a motor recovery rate ≥ 50%, regaining ambulatory function, and patient survival were analyzed.

RESULTS

About one-half (48.4%) of the patients had a motor recovery rate ≥ 50%, and 24.4% of patients who were not able to walk due to MESCC before the surgery were able to walk after the operation. The factors "involvement of the thoracic spine" (p = 0.015) and "delayed operation" (p = 0.041) were associated with poor neurological recovery. Low preoperative muscle function grade was associated with a low likelihood of regaining ambulatory functions (p = 0.002). Furthermore, performing the operation ≥ 72 hours after the onset of the neurological deficit significantly decreased the likelihood of regaining ambulatory functions (p = 0.020). Postoperative ambulatory function significantly improved patient survival (p = 0.048).

CONCLUSIONS

Delayed operation and the involvement of the thoracic spine were poor prognostic factors for neurological recovery after MESCC surgery. Furthermore, a more severe preoperative neurological deficit was associated with a lesser likelihood of regaining ambulatory functions postoperatively. Earlier detection of motor weaknesses and expeditious surgical interventions are necessary, not only to improve patient functional status and quality of life but also to enhance survival.

Surgical Causes of Significant Intraoperative Neuromonitoring Signal Changes in Three-Column Spinal Surgery

Study Design

Retrospective case series.

Purpose

To evaluate the risks and causes of neurologic complications in three-column spinal surgery by analyzing intraoperative neurophysiological monitoring (IONM) data.

Overview of Literature

Three-column spinal surgery, which may be required to correct complex spinal deformities or resection of spinal tumors, is known to carry a high risk of neurologic complications. However, few studies reported a specific surgical procedure related to a significant IONM signal change during surgery.

Methods

Multimodality IONM data, including somatosensory-evoked potentials (SSEP) and motor-evoked potentials (MEP), were reviewed in 64 patients who underwent three-column spinal surgery from 2011 to 2015. Surgical procedures included posterior vertebral column resection, pedicle subtraction osteotomy, total en bloc spondylectomy, piecemeal spondylectomy, and corpectomy with laminectomy (n=27) in three cervical, 34 thoracic, and 31 lumbar procedures.

Results

Significant IONM signal changes occurred in 11 of 64 (17.1%) patients. SSEP and MEP were changed in 11 patients. Postoperative neurologic deterioration occurred in 54.5% (6 of 11) of the patients, and two of them were permanent. There was no postoperative neurologic deterioration in patients without significant signal change. Suspected causes of IONM data changes are as follows: adhesion/tethering, translation, contusion, and perfusion.

Conclusions

Based on the results of this study, to enhance neurologic safety in three-column spinal surgery, surgeons should pay attention to protect the spinal cord from mechanical insult, especially when the spinal column was totally destabilized during surgery, and not to compromise perfusion to the spinal cord in close cooperation with a neurologist and anesthesiologist.