Capillary electrophoresis with dual C4D/UV detection for simultaneously determining major metal cations and whey proteins in milk

A reliable and simple CE method with dual C⁴D and UV detection modes for simultaneous determination of major metal cations and whey proteins in milk samples was developed. Sample pretreatment comprised dilution, acidification to pH 4.55 with 10 mM AcOH and centrifugation. The complete separation of metal cations K⁺, Ca²⁺, Na⁺, and Mg²⁺ and whey proteins α-Lac, and β-Lg could be achieved respectively within 10 min and 20 min in a simple BGE composed of 1.0 M AcOH, 12 mM l-His and 2 mM 18-crown-6 with pH 2.74 at a voltage/current of +15 kV/12.5 μA. The samples were injected hydrodynamically by a pressure of 50 mbar for 5 s, the excitation voltage and excitation frequency of the C⁴D detector were 80 V and 1000 kHz, respectively and the detection wavelength of UV detection was set at 200 nm. In cation analysis, the range of the detection limit was 0.05-0.10 mg L^-1 for C⁴D detection and 0.10-0.50 mg L^-1 for UV detection, respectively, and the relative standard deviations (RSD%, n = 5) of intraday and interday analysis were 0.37-0.55% and 0.46-0.79% for the relative migration time, and 2.51-4.12% and 3.65-4.91% for the peak area, respectively. In whey protein analysis, the detection limits of β-Lg and α-Lac analysis were 5 mg L^-1 and 3 mg L^-1, respectively and the relative standard deviations (RSD%, n = 5) of intraday and interday analysis were 0.29-0.31% and 0.43-0.48% for the migration time and 2.89-3.25% and 3.29-4.18% for the peak area, respectively. The content of four major metal cations and two whey proteins in various types of milk samples was obtained. The results indicated that the content of metal cations varied little in milk samples of different brands and prices, while the content of whey proteins, as thermosensitive active proteins, varied greatly among different heat-treated milk samples.

Aroma profile of a traditionally fermented butter (smen)

The spontaneous fermentation of butter produces a highly fragrant product called smen. The short chain fatty acids (C4 to C10) have been traditionally considered the main aromas of this product but our work on the volatile fraction characterisation using SPME GC/MS showed that other products may also be important. Indeed, 183 different volatile compounds were detected belonging mainly to carboxylic acids, esters, ketones, nitrogen compounds and terpenes. However, only 19 compounds were common to more than 50% of the samples. These include short chain fatty acids (C4 to C10), their esters and short chain methylketones (C5 to C11). Despite their high levels in all samples, the amounts of C4 to C10 free fatty acids could not explain the differences in preparation and consumer appreciation of the samples. In contrast, the levels and nature of some methylketones and esters, particularly butanoic and hexanoic ethyl esters and 2-pentanone, seem to better reflect the effects of salt, thyme, acidity and consumer preferences.

A rapid ion chromatography column-switching method for online sample pretreatment and determination ofl-carnitine, choline and mineral ions in milk and powdered infant formula

A simple and rapid column-switching ion chromatography with non-suppressed conductivity detection method was developed for simultaneous determination ofl-carnitine, choline and mineral ions in milk and powdered infant formula samples.

Capillary Electrophoresis in Food and Foodomics

Quality and safety assessment as well as the evaluation of other nutritional and functional properties of foods imply the use of robust, efficient, sensitive, and cost-effective analytical methodologies. Among analytical technologies used in the fields of food analysis and foodomics, capillary electrophoresis (CE) has generated great interest for the analyses of a large number of compounds due to its high separation efficiency, extremely small sample and reagent requirements, and rapid analysis. The introductory section of this chapter provides an overview of the recent applications of capillary electrophoresis (CE) in food analysis and foodomics. Relevant reviews and research articles on these topics are tabulated including papers published in the period 2011-2014. In addition, to illustrate the great capabilities of CE in foodomics the chapter describes the main experimental points to be taken into consideration for a metabolomic study of the antiproliferative effect of carnosic acid (a natural diterpene found in rosemary) against HT-29 human colon cancer cells.

Evaluation of X-ray fluorescence spectroscopy as a method for the rapid and direct determination of sodium in cheese

Cheese manufacturers indirectly determine Na in cheese by analysis of Cl using the Volhard method, assuming that all Cl came from NaCl. This method overestimates the actual Na content in cheeses when Na replacers (e.g., KCl) are used. A direct and rapid method for Na detection is needed. X-ray fluorescence spectroscopy (XRF), a mineral analysis technique used in the mining industry, was investigated as an alternative method of Na detection in cheese. An XRF method for the detection of Na in cheese was developed and compared with inductively coupled plasma optical emission spectroscopy (ICP-OES; the reference method for Na in cheese) and Cl analyzer. Sodium quantification was performed by multi-point calibration with cheese standards spiked with NaCl ranging from 0 to 4% Na (wt/wt). The Na concentration of each of the cheese standards (discs: 30mm×7mm) was quantified by the 3 methods. A single laboratory method validation was performed; linearity, precision, limit of detection, and limit of quantification were determined. An additional calibration graph was created using cheese standards made from natural or process cheeses manufactured with different ratios of Na:K. Both Na and K calibration curves were linear for the cheese standards. Sodium was quantified in a variety of commercial cheese samples. The Na data obtained by XRF were in agreement with those from ICP-OES and Cl analyzer for most commercial natural cheeses. The XRF method did not accurately determine Na concentration for several process cheese samples, compared with ICP-OES, likely due to the use of unknown types of Na-based emulsifying salts (ES). When a calibration curve was created for process cheese with the specific types of ES used for this cheese, Na content was successfully predicted in the samples. For natural cheeses, the limit of detection and limit of quantification for Na that can be determined with an acceptable level of repeatability, precision, and trueness was 82 and 246mg/100g of cheese, respectively. Calibration graphs should be created with standards that reflect the concentration range, ratio, and salt type present in the cheeses. This XRF method can be successfully used for the rapid and direct measurement of Na content in a wide variety of natural cheeses. Commercial process cheese manufacturers use proprietary blends of ES. We did find that the XRF technique worked for process cheese when the calibration graphs were created with the specific types of ES actually used.