Development of a real-time quantitative PCR assay using a TaqMan minor groove binder probe for the detection of α-lactalbumin in food

In vitro selection and optimization of high-affinity aptamer for milk allergen α-lactalbumin and its application in dual-mode detection

Milk is one of the most common sources of protein in people’s daily lives, and it is also recognized by the World Health Organization (WHO) as one of the eight categories of food allergies to human beings. α-lactalbumin (α-La) is the main cause of milk allergy. In this study, a single-stranded DNA aptamer with high binding affinity to α-La were selected using systematic evolution of ligands by exponential enrichment (SELEX) method. Compared with the full-length sequence, the binding affinity of the truncated aptamer LA-1t for α-La was increased six times using fluorescence analysis. Circular dichroism (CD) indicated that the secondary structure of LA-1t contained a typical hairpin structure. Through the docking simulation of LA-1t and α-La, these experimental results were further explained theoretically, and the recognition mechanism was explained. Finally, the colorimetric and fluorescence signal of boron nitride quantum dots anchored to porous CeO₂ nanorods (BNQDs/CeO₂) were modulated by FAM-labeled LA-1t to achieve highly selective and sensitive determination of α-La. This dual-mode sensing strategy displayed sensitive recognition for α-La in a linear range of 5–4,000 ng/ml with the LOD was 3.32 ng/ml (colorimetry) and 0.71 ng/ml (fluorescence), respectively. Simultaneously, the colorimetry/fluorescence dual-mode sensing strategy was applied for detecting α-La in spiked real samples and demonstrated good stability and reliability.

Rapid Detection of Nonprotein Nitrogen Adulterants in Milk Powder Using Point-Scan Raman Hyperspectral Imaging Technology

To develop a rapid detection method for nonprotein nitrogen adulterants, this experiment sets up a set of point-scan Raman hyperspectral imaging systems to qualitatively distinguish and quantitatively and positionally analyze samples spiked with a single nonprotein nitrogen adulterant and samples spiked with a mixture of nine nonprotein nitrogen adulterants at different concentrations (5 × 10-3 to 2.000%, w/w). The results showed that for samples spiked with single nonprotein nitrogen adulterants, the number of pixels corresponding to the adulterant in the region of interest increased linearly with an increase in the analyte concentration, the average coefficient of determination (R 2) was above 0.99, the minimum detection concentration of nonprotein nitrogen adulterants reached 0.010%, and the relative standard deviation (RSD) of the predicted concentration was less than 6%. For the sample spiked with a mixture of nine nonprotein nitrogen adulterants, the standard curve could be used to accurately predict the additive concentration when the additive concentration was greater than 1.200%. The detection method established in this study has good accuracy, high sensitivity, and strong stability. It provides a method for technical implementation of real-time and rapid detection of adulterants in milk powder at the port site and has good application and promotion prospects.

Whey allergens: Influence of nonthermal processing treatments and their detection methods

Whey and its components are recognized as value-added ingredients in infant formulas, beverages, sports nutritious foods, and other food products. Whey offers opportunities for the food industrial sector to develop functional foods with potential health benefits due to its unique physiological and functional attributes. Despite all the above importance, the consumption of whey protein (WP) can trigger hypersensitive reactions and is a constant threat for sensitive individuals. Although avoiding such food products is the most successful approach, there is still a chance of incorrect labeling and cross-contamination during food processing. As whey allergens in food products are cross-reactive, the phenomenon of homologous milk proteins of various species may escalate to a more serious problem. In this review, nonthermal processing technologies used to prevent and eliminate WP allergies are presented and discussed in detail. These processing technologies can either enhance or mitigate the impact of potential allergenicity. Therefore, the development of highly precise analytical technologies to detect and quantify the existence of whey allergens is of considerable importance. The present review is an attempt to cover all the updated approaches used for the detection of whey allergens in processed food products. Immunological and DNA-based assays are generally used for detecting allergenic proteins in processed food products. In addition, mass spectrometry is also employed as a preliminary technique for detection. We also highlighted the latest improvements in allergen detection toward biosensing strategies particularly immunosensors and aptasensors.

Selected Instrumental Techniques Applied in Food and Feed: Quality, Safety and Adulteration Analysis

This review presents an overall glance at selected instrumental analytical techniques and methods used in food analysis, focusing on their primary food science research applications. The methods described represent approaches that have already been developed or are currently being implemented in our laboratories. Some techniques are widespread and well known and hence we will focus only in very specific examples, whilst the relatively less common techniques applied in food science are covered in a wider fashion. We made a particular emphasis on the works published on this topic in the last five years. When appropriate, we referred the reader to specialized reports highlighting each technique's principle and focused on said technologies' applications in the food analysis field. Each example forwarded will consider the advantages and limitations of the application. Certain study cases will typify that several of the techniques mentioned are used simultaneously to resolve an issue, support novel data, or gather further information from the food sample.

Fluorescence-based quantitative platform for ultrasensitive food allergen detection: From immunoassays to DNA sensors

Food allergies are global health issue with an increasing prevalence that affect food safety; hence, food allergen detection, labeling, and management are considered to be important priorities in the food industry. In this critical review, we provide a comprehensive overview of several fluorescence-based platforms based on different biorecognition ligands, such as antibodies, DNA, aptamers, and cells, for food allergen quantification. Traditional analytical methods are generally unsuitable for food manufacturers to accomplish the real-time identification of food allergens in food products. Therefore, it is important to develop simple, rapid, inexpensive, accurate, and sensitive methods to improve user accessibility. A fluorescence-based quantitative platform provides an excellent detection platform for food allergens because of its high sensitivity. This review summarizes the traditional antibody-based fluorescent techniques for food allergen detection, such as the time-resolved fluoroimmunoassay , immunofluorescence imaging, fluorescence enzyme-linked immune sorbent assay, flow injection fluoroimmunoassay, and fluorescence immunosensors. However, these methods suffer from disadvantages such as the significant rate of false-positive and false-negative results due to antibody cross-reactivity with nontarget food components in the complex food matrix and epitope degradation during food processing. Hence, different types of fluorescence-based immunoassays are suitable for standardization and quantification of allergens in fresh foods. In addition, we summarize new fluorescence-based quantitative platforms, including fluorescence genosensors, fluorescence cell sensors, and fluorescence aptamer sensors. With the advantages of high sensitivity and simple operation, fluorescence biosensors will have great potential in the future and could provide portable methods for multiallergen real-time detection in complex food systems.

Are current analytical methods suitable to verify VITAL® 2.0/3.0 allergen reference doses for EU allergens in foods?

Food allergy affects up to 6% of Europeans. Allergen identification is important for the risk assessment and management of the inadvertent presence of allergens in foods. The VITAL® initiative for voluntary incidental trace allergen labeling suggests protein reference doses, based on clinical reactivity in food challenge studies, at or below which voluntary labelling is unnecessary. Here, we investigated if current analytical methodology could verify the published VITAL® 2.0 doses, that were available during this analysis, in serving sizes between 5 and 500 g. Available data on published and commercial ELISA, PCR and mass spectrometry methods, especially for the detection of peanuts, soy, hazelnut, wheat, cow's milk and hen's egg were reviewed in detail. Limit of detection, quantitative capability, matrix compatibility, and specificity were assessed. Implications by the recently published VITAL® 3.0 doses were also considered. We conclude that available analytical methods are capable of reasonably robust detection of peanut, soy, hazelnut and wheat allergens for levels at or below the VITAL® 2.0 and also 3.0 doses, with some methods even capable of achieving this in a large 500 g serving size. Cow's milk and hen's egg are more problematic, largely due to matrix/processing incompatibility. An unmet need remains for harmonized reporting units, available reference materials, and method ring-trials to enable validation and the provision of comparable measurement results.

Development and verification of a quantitative real-time PCR method to identify and quantify gelatin derived from animal hide

The species origin of hide gelatin is a crucial issue with respect to health concerns and religious restrictions. Analysis of the animal-derived ingredients of gelatin by reliable methods is necessary to ensure its authenticity. However, due to the highly processed nature of gelatin, it remains a challenge to identify gelatin end products accurately and robustly. Our study established and verified a quantitative real-time PCR (qPCR) method based on careful selection of target genes and a DNA extraction method. The middle products of the gelatin production streamline were investigated to explore the influence of each critical processing step on the method. Gelatin reference samples were used to quantify the levels of target species. Commercial gelatin commodities were surveyed to highlight the mislabeling situation. In summary, the qPCR method was demonstrated to be highly specific and sensitive, with limits of detection (LOD) of 0.1 to 1 pg/µL and gelatin LODs of 0.1% to 5% (w/w). The transition from decoction to concentrated gel was found to have the most severe effect on the qPCR. Intensification of pressure or temperature or employment of enzyme hydrolysis aggravated the DNA damage, resulting in elevated Cq values. Quantitation of gelatin products was feasible; gelatin products produced from 5% target hide and 95% matrix hide mixtures showed 2.9% to 5.2% target species. The 26% relative error for low gelatin content is acceptable for semiquantitation purposes. A market survey showed that 52.6% of the gelatin products were mislabeled as being of animal origin.

Detection and Quantification of Milk Ingredients as Hidden Allergens in Meat Products by a Novel Specific Real-Time PCR Method

Milk ingredients are often included in a wide range of meat products, such as cooked hams and sausages, to improve technological characteristics. However, milk proteins are also important food allergens. The aim of this study was the development of a highly sensitive and specific real-time PCR system targeting the 12S rRNA gene of Bos domesticus for the detection and quantification of milk as an allergenic ingredient in processed meat products. The method was able to achieve an absolute limit of detection (LOD) of 6 fg of milk DNA. Using a normalized approach (∆Ct method) for the detection of milk protein concentrate (MPC), it was possible to obtain sensitivities down to 0.01% (w/w) of MPC in model hams (raw and cooked) and autoclaved sausages, and 0.005% in raw sausage mixtures. The developed systems generally presented acceptable PCR performance parameters, being successfully validated with blind samples, applied to commercial samples, and further compared with an immunochemical assay. Trace amounts of milk material were quantified in two out of 13 samples, but the results mostly infer the excessive practice of the precautionary labeling.

Establishment and Evaluation of a Loop-Mediated Isothermal Amplification Assay for Detection of Raccoon Dog in Meat Mixtures

Raccoon dog (Nyctereutes procyonoides) is an economically important animal used for fur production, but consuming its meat is injurious to human health. Currently, no rapid and sensitive method for detecting raccoon dog meat in meat mixtures is available. In this study, we developed an easily applicable, rapid, and economically feasible method for identifying the presence of raccoon dog in meat mixtures based on loop-mediated isothermal amplification (LAMP). Four sets of LAMP primers were tested at different temperatures, and the primers that worked best at 62°C (set 2) were determined. In the LAMP assay, there was no cross-reactivity with the meat procured from other species of animals and the detection limit of DNA concentration was 0.1 pg·μL−1, slightly higher than TaqMan real-time PCR (0.01 pg·μL−1), but sensitivity of 0.1 pg·μL−1 complies with most requirements of routine analysis. Moreover, by the LAMP method, the meat mixtures containing more than 0.5% of the raccoon dog component were directly detected (without DNA extraction) in the supernatant isolated from the meat mixtures after performing repeated cycles of thawing and freezing of minced meat mixtures. Our results show that LAMP assay is a valuable, straightforward, and sensitive detection tool for identification of raccoon dog meat in mixtures.