Whipping properties of recombined, additive-free creams

Impact of pulsed electric field intensity on the cream separation efficiency from bovine milk and physico-chemical properties of the cream

Low-temperature (9-12 °C) pulsed electric field (PEF) was investigated in milk before cream separation at different intensities (9-27 kV/cm, 66 μs, 16-28 kJ/L) regarding its potential to render processing more sustainable, retain a high physico-chemical quality, enhance functional properties, and gently modify the structure of the milk fat globule membrane (MFGM). Cream volume per L milk were most efficiently increased by 31 % at the lowest PEF intensity in comparison to untreated milk and cream (P < 0.05). Untreated and PEF-treated milk and obtained cream were assessed with compositional (fat, protein, casein, lactose, and total solids content) and particle size distribution analyses, showing no significant differences (P ≥ 0.05) and, thus, indicating retention of 'native-like' product quality. Overrun and stability of cream, whipped for 20 and 60 s at 15000 rpm using a high-shear mixer, were improved most notably by the lowest and the highest PEF intensities, achieving up to 69 % enlarged overrun and up to 22 % higher stability, respectively (P < 0.05), than in untreated whipped cream. Protein component analyses for milk and cream were carried out by sodium dodecylsulphate-polyacrylamide gel electrophoresis (SDS-PAGE). Noticeable differences between untreated and PEF-treated milk were not observed, but the SDS-PAGE results for cream showed noticeably different bands for some of the protein components, indicating structural changes in MFGM-, whey-, and phospho-proteins due to PEF and/or separator processing effects. More intense bands of xanthine oxidase, xanthine dehydrogenase, butyrophilin, bovine serum albumine, adipophilin (ADPH), and glycoproteins PAS6/7 were observed specifically at 21 kV/cm. Gentle electroporation of both MFGM layers by PEF was determined based on the changes in MFGM monolayer components, such as ADPH and PAS 6/7, exhibiting intensified bands. PEF intensity-dependent impact on the structure of MFGM and casein, leading to a reconfiguration of the cream matrix due to different structuring interactions among proteins, among milk fat globules, and between fat and protein components, was suggested. Overall, low-temperature PEF applied at different intensities showed great potential for gentle, efficient, and functional properties-tailored dairy processing and may also enable effective extraction of highly bioactive ingredients from dairy sources.

Combination of carrageenan with sodium alginate, gum arabic, and locust bean gum: Effects on rheological properties and quiescent stabilities of partially crystalline emulsions

In the present study, carrageenan (CG) was combined with sodium alginate (SA), gum arabic (GA), and locust bean gum (LBG) to obtain four gum combinations (CG, CG + SA, CG + GA, and CG + LBG). The effects of different combinations on rheological properties and quiescent stabilities of PCEs were systematically investigated through characterization of fresh emulsion related parameters (rheological properties, forces between proteins, zeta potentials, surface tensions, interfacial adsorption properties, and multiple light scattering) and storage related parameters (visual appearance, creaming index, viscosities, particle sizes, and microscopic morphology). Rheological results indicated that CG PCEs had the highest apparent viscosities of 7.77-41.91 Pa·s at 0.01 s-1, followed by CG + SA PCEs (2.35-30.62 Pa·s), CG + GA PCEs (2.37-21.16 Pa·s), and CG + LBG PCEs (2.06-19.93 Pa·s). At low thickener concentration (0.02 %), CG PCE exhibited weak gel structure due to higher G' than G″ at all frequencies, while CG + SA, CG + GA, and CG + LBG PCEs had entangled network due to intersection between G' and G″. After three months of storage, CG + SA PCEs showed the lowest creaming index values (11.47-17.75 %), which were significantly lower than CG PCEs (15.35-20.85 %), CG + GA PCEs (15.97-24.42 %), and CG + LBG PCEs (17.13-21.71 %). Meanwhile, all the samples except for 0.02 % CG + SA PCE completely lost fluidity, and their viscosities were above 14,000 mPa·s. It was further found that CG stabilized emulsions showed severe droplet flocculation induced by hydrophobic interactions among adsorbed proteins. Combination of CG with SA, GA, and LBG, especially CG + SA, formed strong network structure and reduced contribution of hydrophobic interactions, which effectively inhibited flocculation of fat droplets, thereby improving rheological properties and storage stabilities of PCEs.

Static stability of partially crystalline emulsions: Impacts of carrageenan and its blends with xanthan gum and/or guar gum

In the present study, four different combinations of gums, including carrageenan (CG), its binary blends with xanthan gum (XG) or guar gum (GG) in equal ratios, and its ternary blends with XG and GG in three equal ratios, were involved into making partially crystalline emulsions (PCEs), respectively. The freshly prepared emulsions were systematically characterized by rheological property, particle size distribution, microscopic morphology, interfacial property, and intermolecular interactions, and their emulsion stabilities were further evaluated using multiple light scattering technique and storage test. All PCEs stabilized by gum blends (CG + XG, CG + GG, and CG + XG + GG) obtained decreased apparent viscosities at 0.01 s^-1 (10.12-25.32 Pa·s), particle sizes (3.12-4.06 μm), as well as interfacial protein concentrations (22.60-27.01 mg/m²), which were much lower than those with single CG (35.98 Pa·s, 6.72 μm, and 47.74 mg/m², respectively). The microscopic morphology showed that blending CG with XG and/or GG contributed to formation of firmer three-dimensional matrix, thereby preventing the aggregation of fat droplets. Inclusion of XG and/or GG also significantly reduced contribution of hydrophobic interactions from 0.72 to 0.24-0.44 mg/mL. Both multiple light scattering and storage test revealed that emulsion instabilities were mainly manifested as a clarification at the bottom and an agglomeration at the top. PCE-CG + XG + GG exhibited superior stability with low creaming index (6.20 %) and viscosity (1180.0 mPa·s) after three months of storage. The research aims to evaluate the effects of CG and its blends with XG and GG on stability of PCEs, and the results potentially provide valuable information for manufacture of stable PCE foods.

Influence of microbiological risks on the quality of recombined butter

The article provides the results of studies on the influence of microbiological risks caused by the used raw materials and the technological modes of manufacture on the quality and storage capacity of recombined butter. The objects of study were the following: butter - raw material; fat mixture before and after pasteurization; butter made according to the recombination scheme using pasteurization and without pasteurization of the normalized fat dispersion. Samples were stored at temperature conditions (3±2) °C, (10±1) °С, and (25±1) °С. Microbiological, organoleptic and physicochemical indicators were determined by standardized methods to assess the quality and storage capacity of the butter. The results of the research have shown that microbiological risks in the manufacture of recombined butter are due to the quality of raw materials, compliance with technological parameters of manufacture, sanitary and hygienic conditions of production, and temperature conditions for storing butter.