Effect of salt on structure-function relationships of cheese

Autochthonous cultures to improve the quality of PGI Castellano cheese: Impact on proteolysis, microstructure and texture during ripening

The aim of this research was to find out the effect of different combinations of starter and non-starter cultures on the proteolysis of Castellano cheese during ripening. Four cheese batches were prepared, each containing autochthonous lactobacilli and or Leuconostoc, and were compared with each other and with a control batch, that used only a commercial starter. To achieve this, nitrogen fractions (pH 4.4-soluble nitrogen and 12 % trichloroacetic acid soluble nitrogen, polypeptide nitrogen and casein nitrogen), levels of free amino acids and biogenic amines were assessed. Texture and microstructure of cheeses were also evaluated. Significant differences in nitrogen fractions were observed between batches at different stages of ripening. The free amino acid content increased throughout the cheese ripening process, with a more significant increase occurring after the first 30 days. Cheeses containing non-starter lactic acid bacteria exhibited the highest values at the end of the ripening period. Among the main amino acids, GABA was particularly abundant, especially in three of the cheese batches at the end of ripening. The autochthonous lactic acid bacteria were previously selected as non-producers of biogenic amines and this resulted in the absence of these compounds in the cheeses. Analysis of the microstructure of the cheese reflected the impact of proteolysis. Additionally, the texture profile analysis demonstrated that the cheese's hardness intensified as the ripening period progressed. The inclusion of autochthonous non-starter lactic acid bacteria in Castellano cheese production accelerated the proteolysis process, increasing significantly the free amino acids levels and improving the sensory quality of the cheeses.

Manufacture of Low-Na White Soft Brined Cheese: Effect of NaCl Substitution with a Combination of Na-K Salts on Proximate Composition, Mineral Content, Microstructure, and Sensory Acceptance

All over the world, especially in Western societies, table salt intake that is inordinately higher than the acceptable level has been observed. An excess of Na in the human diet, mostly from processed foods, is becoming the "number one killer", leading to increased blood pressure. Therefore, the food industry is faced with a need to reduce Na in human nutrition in an effort to raise public health protection to a higher level. In this study, a commercially available combination of Na/K salts (COMB) at different concentrations was used as a NaCl substitute in the production of a modified, healthier, Na-reduced cheese. Samples of the modified low-Na white soft-brined cheese (WSBC) were produced by adding four different concentrations of COMB to production lots PL-1 to PL-4, and the control (CON) samples were prepared by salting with the usual, non-reduced concentration of NaCl. The effects of NaCl replacement on the physical-chemical parameters, major- and micro-elements, and microstructural and sensory properties of the WSBC were investigated. The obtained results indicated that there was no significant influence on the ash content, pH, and aw. The Na and K levels differed among treatments (p < 0.001). The lowest Na level in this study was recorded in PL-4 (only COMB was added) and was 334.80 ± 24.60 mg/100 g. According to the Na content, WSBC PL4 can be labeled with the nutrient claim "reduced amount of Na". A significant difference (p < 0.05) was noticed in overall acceptance between the CON and PL-4, with no statistically significant difference found amongst other WSBC production lots. The replacement of NaCl resulted in a slightly greater firmness of the WSBC. The results confirm the possibility of producing low-Na WSBC when optimal amounts of a suitable mineral salt are used as a substitute for NaCl, thus reducing the risk of high Na intake in the human body through the consumption of evaluated cheese.

Phenotypic and phylogenetic characterization of Lactobacillus species isolated from traditional Lighvan cheese

Abstract

Lighvan cheese (Lighvan panir) is among the most famous traditional cheese in Iran for its desired aroma and flavor. Undoubtedly, the lactic acid bacteria especially the genus Lactobacillus are the critical factors in developing the aroma, flavor, and texture in Lighvan cheese. In this study, the Lactobacillus population of the main Lighvan cheese was investigated. The Lactobacillus of the main Lighvan cheese was isolated using specific culture methods according to previously published Guidelines. Then, the phylogenetic features were investigated and the phenotypic characteristics were examined using specific culture methods. Twenty-eight Gram-positive bacterial species were identified belonged to the genus Lactobacillus. According to the same sequences as each other, three groups (A, B, and C) of isolates were categorized with a high degree of similarity to L. fermentum (100%) and L. casei group (L. casei, L. paracasei, and L. rhamnosus) (99.0 to 100%). Random amplified polymorphic DNA (RAPD) fingerprint analysis manifested the presence of three clusters that were dominant in traditional Lighvan cheese. Cluster І was divided into 4 sub-clusters. By the result of carbohydrate fermentation pattern and 16S rRNA sequencing, isolates were identified as L. rhamnosus. The isolates in clusters II and III represented L. paracasei and L. fermentum, respectively as they were identified by 16S rRNA sequencing and fermented carbohydrate patterns. Our result indicated that the specific aroma and flavor of traditional Lighvan cheese can be related to its Lactobacillus population including L. fermentum, L. casei, L. paracasei, and L. rhamnosus.

Graphical abstract

Effect of Pasteurization and Ripening Temperature on Chemical and Sensory Characteristics of Traditional Motal Cheese

The appropriate physicochemical and sensory characteristics and the traditional elaboration process of Motal cheese resulted in a high consumer acceptability. However, different process steps could have a significant effect on these characteristics. Thus, the present study aimed to investigate the effects of pasteurization, ripening time, and ripening temperature (6 °C and 12 °C) on the physicochemical properties, sensory characteristics, and proteolysis and lipolysis phenomenon of traditional Motal cheese. The cheeses were evaluated each 15 days during 3 months of ripening process. The results showed that pasteurization and ripening temperature had a significant effect on pH, acidity, dry matter, fat, protein, and salt (p < 0.05), which were higher in pasteurized cheeses ripened at higher temperature (12 °C). Moreover, the content of these parameters increased as ripening progressed. Proteolysis and lipolysis intensity were higher in the cheeses elaborated form raw milk and ripened at 12 °C (R12), mainly due to the higher activity of enzymes and/or bacteria. As a general conclusion, the pasteurization and low-temperature ripening process allows us to have a homogeneous product and ensure the microbiological stability of the cheeses, as well as presents higher physicochemical qualities than those obtained from raw milk.

Effect of packing pH values on the crumbliness of fresh Turkish White cheese

A significant amount of Turkish White cheese is still produced in 1-kg cheese blocks and distributed to retail stores and farmers markets in 18-kg tin containers with brine. Portioning the cheese for the customer's desired weight requires a slicing process. The crumbs that occur during cutting or portioning are undesirable for customers and can cause economic loss for the business. In this study, our goal was to investigate the sliceability of White cheese that was manufactured at various final packing (i.e., packing with brine) pH values (5.3, 5.0, 4.7). For this purpose, we manufactured 4 batches of cheese at different times from high heat-treated milk (78°C, 8 min) and monitored the chemical and textural properties at 1, 2, 4, and 8 wk. Cheeses that were packed at pH 4.7 were harder compared with cheeses that were packed at pH 5.0 and 5.3. No correlation was observed between cheese-packing pH values and the size of the crumbs; however, there was a significant negative correlation between packing pH and crumb weight (i.e., decrease in cheese-packing pH increased the crumb weight). Cheeses packed at pH 5.0 and 5.3 exhibited increased slicing adhesiveness during storage. All cheese samples exhibited similar colloidal calcium phosphate levels and water-soluble nitrogen values during storage. This study showed that an increase in the packing pH of White cheese reduced the weight of crumbs that occurred during cutting. This study is the first study to investigate crumbs occurring with slicing in White cheese. This is also the first study in the literature that monitored the colloidal calcium phosphate content of Turkish White cheese.

Effects of Chelating Agents and Salts on Interfacial Properties and Lipid Oxidation in Oil-in-Water Emulsions

The effects of chelating agents and salts on the interfacial characteristics and oxidative stability of oil-in-water emulsions containing an endogenous concentration of metal ions were investigated. Emulsions were fabricated by high-pressure homogenization of 10% oil phase (sacha inchi oil) and 90% aqueous phase (1% Tween 60 in phosphate buffer solution, pH 7, 50 mM). The oxidative stability of the emulsions was characterized by measuring peroxide values and thiobarbituric acid reactive substances throughout storage. Endogenous iron and copper ion levels in the emulsions were detected by atom absorption spectroscopy as 1.99 and 0.86 ppm, respectively. Incorporation of chelating agents, either ethylenediaminetetraacetic acid or sodium citrate, into the emulsions effectively inhibited lipid oxidation, showing that even these low levels of endogenous metal ions ( parts per million) were sufficient to promote oxidation. Conversely, the addition of monovalent salts, NaCl or KCl, slightly increased the rate of lipid oxidation in the emulsions, which was attributed to their impact on the physical properties of the surfactant layer at the oil droplet surfaces. The impact of chelating agents and salts on the electrical characteristics (ξ potential) and relaxation time (T_R) of the surfactant-coated lipid droplets were characterized by particle electrophoresis and nuclear magnetic resonance spectroscopy, respectively. The chelating agents and salts altered the surface potential of the droplets, indicative of a change in the adsorption of metal ions to the droplet surfaces. Moreover, they altered the arrangement of surface-active molecules at the droplet surfaces, thereby impacting the contact of pro-/antioxidants with the oil phase. These results have important implications for the formulation of emulsion-based materials that are more stable to lipid oxidation.

A 100-Year Review: Cheese production and quality

In the beginning, cheese making in the United States was all art, but embracing science and technology was necessary to make progress in producing a higher quality cheese. Traditional cheese making could not keep up with the demand for cheese, and the development of the factory system was necessary. Cheese quality suffered because of poor-quality milk, but 3 major innovations changed that: refrigeration, commercial starters, and the use of pasteurized milk for cheese making. Although by all accounts cold storage improved cheese quality, it was the improvement of milk quality, pasteurization of milk, and the use of reliable cultures for fermentation that had the biggest effect. Together with use of purified commercial cultures, pasteurization enabled cheese production to be conducted on a fixed time schedule. Fundamental research on the genetics of starter bacteria greatly increased the reliability of fermentation, which in turn made automation feasible. Demand for functionality, machinability, application in baking, and more emphasis on nutritional aspects (low fat and low sodium) of cheese took us back to the fundamental principles of cheese making and resulted in renewed vigor for scientific investigations into the chemical, microbiological, and enzymatic changes that occur during cheese making and ripening. As milk production increased, cheese factories needed to become more efficient. Membrane concentration and separation of milk offered a solution and greatly enhanced plant capacity. Full implementation of membrane processing and use of its full potential have yet to be achieved. Implementation of new technologies, the science of cheese making, and the development of further advances will require highly trained personnel at both the academic and industrial levels. This will be a great challenge to address and overcome.

Fluorescence spectroscopy coupled with independent components analysis to monitor molecular changes during heating and cooling of Cantal-type cheeses with different NaCl and KCl contents

BACKGROUND

Reduction of NaCl content of cheeses has received considerable attention by research during the past decades because of its health effects. Nonetheless, NaCl reduction is a challenge since it plays an important role in cheese quality, such as structure, texture and functional properties. Several methods were used to evaluate the effect of NaCl on these attributes. In this study, Cantal-type cheeses with different salts (NaCl and KCl) were analyzed for their structure at a molecular level and rheological properties during heating (20-60 °C) and cooling (60-20 °C). The structure was investigated by synchronous fluorescence spectroscopy (SFS) and the rheological properties by small-amplitude oscillatory test.

RESULTS

Independent components analysis (ICA) gave three independent components that were attributed to coenzyme/Maillard reaction products (IC1), tryptophan (IC2) and vitamin A (IC3). Signal proportions of each IC depicted information regarding the changes in those fluorophores with salts, heating and cooling. In addition, canonical correlation analysis (CCA) of the IC proportions and rheological measurements related modifications at a molecular level evaluated by fluorescence to cheese texture (0.34 < R² < 0.99).

CONCLUSION

This study demonstrated that SFS can monitor and characterize modification of Cantal-type cheeses at a molecular level, based on the analysis of the fluorescence spectra by ICA. The nature of correlation between signal proportions and the rheological parameters depicted that rheological attributes of cheeses observed at the macroscopic level can be derived from fluorescence spectra. © 2017 Society of Chemical Industry.

Emerging Innovations to Reduce the Salt Content in Cheese; Effects of Salt on Flavor, Texture, and Shelf Life of Cheese; and Current Salt Usage: A Review

Salt is an essential ingredient for cheese production, and it influences various aspects of cheese, including the shelf life, enzyme activity, flavor, casein hydration, and microbial proliferation during ripening. Several consumers avoid cheese with high salt content, mainly due to health problems such as hypertension, cardiovascular disease (CVD), stroke, and heart attacks. Salt has been commonly used for several purposes in cheese production, including for obtaining the required flavor and texture, for its preservative properties, and as a taste enhancer. However, salt usage has been opposed by the public and governmental bodies, who have been advised by health authorities that salt should be reduced or avoided in cheese for healthier life. However, salt replacement or reduction in cheese manufacturing requires formulation of intensive strategies. This review provides information about several strategies and innovations for reduction and replacement of salt in cheese manufacturing without seriously affecting the quality, microbial safety, and sensory properties of cheeses.

Symposium review: Structure-function relationships in cheese

The quality and commercial value of cheese are primarily determined by its physico-chemical properties (e.g., melt, stretch, flow, and color), specific sensory attributes (e.g., flavor, texture, and mouthfeel), usage characteristics (e.g., convenience), and nutritional properties (e.g., nutrient profile, bioavailability, and digestibility). Many of these functionalities are determined by cheese structure, requiring an appropriate understanding of the relationships between structure and functionality to design bespoke functionalities. This review provides an overview of a broad range of functional properties of cheese and how they are influenced by the structural organization of cheese components and their interactions, as well as how they are influenced by environmental factors (e.g., pH and temperature).

Cross-sectional survey of salt content in cheese: a major contributor to salt intake in the UK

OBJECTIVE

To investigate the salt (sodium chloride) content in cheese sold in UK supermarkets.

STUDY DESIGN

We carried out a cross-sectional survey in 2012, including 612 cheeses available in UK supermarkets.

METHODS

The salt content (g/100 g) was collected from product packaging and nutrient information panels of cheeses available in the top seven retailers.

RESULTS

Salt content in cheese was high with a mean (±SD) of 1.7±0.58 g/100 g. There was a large variation in salt content between different types of cheeses and within the same type of cheese. On average, halloumi (2.71±0.34 g/100 g) and imported blue cheese (2.71±0.83 g/100 g) contained the highest amounts of salt and cottage cheese (0.55±0.14 g/100 g) contained the lowest amount of salt. Overall, among the 394 cheeses that had salt reduction targets, 84.5% have already met their respective Department of Health 2012 salt targets. Cheddar and cheddar-style cheese is the most popular/biggest selling cheese in the UK and has the highest number of products in the analysis (N=250). On average, salt level was higher in branded compared with supermarket own brand cheddar and cheddar-style products (1.78±0.13 vs 1.72±0.14 g/100 g, p<0.01). Ninety per cent of supermarket own brand products met the 2012 target for cheddar and cheddar-style cheese compared with 73% of branded products (p=0.001).

CONCLUSIONS

Salt content in cheese in the UK is high. There is a wide variation in the salt content of different types of cheeses and even within the same type of cheese. Despite this, 84.5% of cheeses have already met their respective 2012 targets. These findings demonstrate that much larger reductions in the amount of salt added to cheese could be made and more challenging targets need to be set, so that the UK can continue to lead the world in salt reduction.

Effect of calcium addition and pH on yield and texture of Minas cured cheese

Milk calcium concentration is a factor related to cheese texture, an important rheological property of cheese quality as perceived by consumers. This study aimed to evaluate the effect of different pH conditions (5.8 and 6.6) and calcium addition (0, 150, 300 ppm of CaCl2), on yield and nutrient retention of the clots obtained and on the texture of Minascured cheese. Clots were analyzed for wet and dry yield, percentage content and retention of protein, fat and calcium. The texture of the cheese was evaluated by instrumental and sensorial tests. No differences were observed on the wet and dry yields, or on the protein content, fat and calcium retention of clots produced in the different experimental conditions. The instrumental evaluation showed that calcium addition significantly influenced the texture of cheeses, regardless of the pH of milk clotting. The sensory panel did not find a difference in the hardness ofcheeses produced at the same pH of milk clotting in function of CaCl2 addition. There was no difference in the texture of Minascured cheese due to the calcium addition to milk for dairy product consumers, which brings a new perspective on manufacture for cheese markers.