Influence of Calcium and Phosphorus, Lactose, and Salt-to-Moisture Ratio on Cheddar Cheese Quality: Changes in Residual Sugars and Water-Soluble Organic Acids During Ripening

Symbiotic sheep milk cheese containing Moringa oleifera extract and Bifidobacterium pseudolongum INIA P2

Healthy non-bovine functional dairy products are reaching high interest among consumers. In the present study, an aqueous polyphenol-rich Moringa oleifera extract (MoE) and a Bifidobacterium strain of human origin (B. pseudolongum INIA P2) were added, alone or in combination, for the manufacture of three experimental and one control sheep milk cheeses. In general, addition of 2.05 g of lyophilized MoE per 100 g of curd did not affect cheese dry matter or lactococci starter counts during ripening. B. pseudolongum INIA P2 showed good viability in cheese during ripening, and after simulated major gastrointestinal conditions, reaching levels above 7 log CFU / g of cheese. Cheeses with MoE showed lower pH, higher proteolysis and aminopeptidase activity than control cheese. MoE impoved functional properties, significantly (P < 0.01) increasing total phenolic content (TPC) and, especially, antioxidant capacity, with respect to control cheese. MoE modified cheese colour and volatile profile. Cheeses with MoE were darker in colour with higher red and yellow components than control cheese. Several volatile compounds were only detected in cheeses with MoE, indicating their plant origin. On top of that, increased levels of compounds originating from amino acid catabolism were present in these cheeses, as a result of their higher proteolytic and peptidolytic indexes. The symbiotic cheese with MoE and B. pseudolongum INIA P2 could confer beneficial effects on consumers' health by increasing polyphenol bioavailability and contributing to the host antioxidant capacity.

Influence of Salting and Ripening Conditions on the Characteristics of a Reduced-Fat, Semi-Hard, Sheep Milk Cheese

This study aimed to assess the effect of salting and ripening conditions on the features of sheep milk, reduced-fat, semi-hard cheese. Eight groups of cheese, with an average fat content of ≅10.5%, moisture on non-fat substances (MNFS) ≅ 56%, a protein-to-fat ratio of 2.9 and pH 5.1, were manufactured and analyzed throughout ripening. The experimental factors were the salting method (brine- or dry-salting), the salt content (control- and reduced-salt) and the ripening temperature sequence (11 or 18 °C at the 3rd and 4th week). Brine-salted cheese exhibited significantly more adequate (p < 0.05) textural and organoleptic characteristics compared to its dry-salted counterpart, i.e., lower hardness, gumminess and adhesiveness, with higher lightness and flavor scores. The mean salt reduction from 2.1 to 1.6% exhibited significant effects (p < 0.05), i.e., increased moisture and MNFS, decreased hardness, gumminess, chewiness and adhesiveness, and increased lightness and meltability of cheese without affecting the microbiological stability or impairing the organoleptic parameters. Ripening at 18 °C at weeks 3-4 significantly increased (p < 0.05) proteolysis and concentrations of lactic and citric acid without affecting meltability, textural or organoleptic features. In conclusion, brine-salting, salt reduction by 20% and the elevation of temperature at a particular ripening period improved the characteristics of this type of reduced-fat sheep milk cheese.

Characterisation of Cooked Cheese Flavour: Non-Volatile Components

This work examined the role of selected non-volatile compounds in cooked cheese flavour, both as tastants and as precursors of aroma generation in the Maillard reaction. The effect of cooking on the concentration of selected non-volatile compounds (organic acids, sugars, amino acids, γ-glutamyl dipeptides, and diketopiperazines) in six cheeses (mature Cheddar, mozzarella, Parmesan, and mild Cheddar (low, medium, and high fat)) was determined. Sugars, amino acids, and γ-glutamyl dipeptides were extracted and analysed by LC, whereas diketopiperazines were extracted by solid-phase extraction and analysed by GC-MS. Sugars, amino acids, and γ-glutamyl dipeptides decreased in concentration during cooking, whereas diketopiperazines and some organic acids increased in concentration. Diketopiperazines were above the taste threshold in some cooked cheeses and below the threshold in uncooked cheeses. The role of fat content in cooked cheese flavour is discussed. Furthermore, γ-glutamyl dipeptide concentration increased during 24 months of ageing in low, medium, and high-fat Cheddars, with similar levels of γ-glutamyl dipeptide detected in aged low and high-fat Cheddars. This work will give valuable insight for the dairy industry to inform the development of cheeses, especially low-fat variants, for use in cooked foods.

Shelf-life studies of putative probiotic Lacticaseibacillus casei strains in milk and model yogurt

Lacticaseibacillus casei are commonly utilized as probiotic in a wide-range of fermented and unfermented dairy products. The stability of probiotics in fermented dairy products during shelf-life is of concern due to low pH and high level of organic acids. The objective of this study is to evaluate L. casei for their ability to survive in a model yogurt and fluid milk; additionally, their impact on the pH, organic acids, and sensory attributes of these products was examined. The strain-to-strain differences in cell densities in yogurt and milk inoculated at a therapeutic level at the end of shelf-life were 1.2 and 1.4 log CFU/mL, respectively. Five of the strains examined increased the pH of the yogurt, while two strains were observed to reduce the pH. In milk, one strain raised the pH, while eleven strains reduced the pH. The levels of lactate, acetate, and formate in both the yogurt and milk were altered in a strain-specific manner. The results suggested that the metabolism by these strains differed significantly during the shelf-life. Careful strain selection is required to identify probiotic L. casei strains that will survive through shelf-life in either yogurt or fluid milk and not impact product quality.

Effect of midday pasteurizer washing on thermoduric organisms and their progression through Cheddar cheese manufacturing and ripening

Thermoduric bacteria are known to affect the quality of Cheddar cheese, with manifested defects including slits, weak body, and blowing. Thermoduric bacteria are likely to increase in numbers during cheese-making, as in-process conditions are conducive to proliferation. The present study was conducted to track thermoduric bacterial progression during an 18- to 20-h Cheddar cheese production run and during ripening when the pasteurizer was washed at midway through the production day. This study also correlated a broad range of chemical changes to the growth of thermoduric bacteria during ripening. Three independent cheese trials were performed at 3.5- ± 0.5-mo intervals. Samples were drawn in duplicates at 4 different times of the day: at the start of the run (vat 1), prior to a midday wash of the pasteurizer (vat 20), after the midday wash of the pasteurizer (vat 21), and at the end of the run (vat 42) for raw milk, pasteurized milk, and cheese. Cheeses were also tested during ripening for 6 mo. Results showed that raw milk total bacterial counts comprised 0.24% thermoduric mesophiles (TM) and 0.12% thermoduric thermophiles (TT). The thermoduric thermophilic bacterial counts increased by log₁₀ 1.23 during the pasteurizer run of 9 to 10 h, indicating a buildup of thermoduric thermophilic bacteria during the pasteurization process itself. Midday washing reduced thermophilic counts by log₁₀ 1.36, as evident by pre- and post-midday wash counts. However, a thermophilic buildup during post-midday wash was again noticed near the end of the 20-h run. We found that TT bacteria decreased in the first 60 d of ripening, whereas TM bacteria increased during the same period. However, TT bacteria increased later during 60 to 180 d of ripening. Bacillus licheniformis was the most frequently isolated bacteria in this study and was recovered at all production stages sampled during the cheese-making and ripening. We observed a significant increase in the level of orotic and uric acids in the vat made at the end of the day. No significant difference in the overall chemical composition, proteolysis, sugar, or other organic acids was observed in cheese made at the start versus the end of the production run.

Recent Advances in Portable and Handheld NIR Spectrometers and Applications in Milk, Cheese and Dairy Powders

Quality and safety monitoring in the dairy industry is required to ensure products meet a high-standard based on legislation and customer requirements. The need for non-destructive, low-cost and user-friendly process analytical technologies, targeted at operators (as the end-users) for routine product inspections is increasing. In recent years, the development and advances in sensing technologies have led to miniaturisation of near infrared (NIR) spectrometers to a new era. The new generation of miniaturised NIR analysers are designed as compact, small and lightweight devices with a low cost, providing a strong capability for on-site or on-farm product measurements. Applying portable and handheld NIR spectrometers in the dairy sector is increasing; however, little information is currently available on these applications and instrument performance. As a result, this review focuses on recent developments of handheld and portable NIR devices and its latest applications in the field of dairy, including chemical composition, on-site quality detection, and safety assurance (i.e., adulteration) in milk, cheese and dairy powders. Comparison of model performance between handheld and bench-top NIR spectrometers is also given. Lastly, challenges of current handheld/portable devices and future trends on implementing these devices in the dairy sector is discussed.

Characterization of a traditional ripened cheese, Kurdish Kope: Lipolysis, lactate metabolism, the release profile of volatile compounds, and correlations with sensory characteristics

Kope cheese has been characterized based on gross chemical composition, free fatty acids (FFAs), organic acids (OAs), volatile compounds (VCs), and sensory attributes (SAs) during 187 days of the ripening period. C16:0, C18:1cisΔ9, and C14:0 were the most abundant FFAs. Lactic and acetic acids were the most prevalent OAs affecting sensory properties. principal component analysis (PCA) indicated that butanoic acid, butyl hexanoate, and 2,3-butanediol were as key VCs. Protein contents, pH (based on FFA and OA), salt in the moisture (S/M), and water activity (a_w ) (based on VC and SA) were highly correlated with PC2, resulted in two distinct groups. Based on lipolysis and glycolysis studies, early-ripened cheese samples showed lipolysis and lactate metabolism more intensely compared to medium and old-ripened ones. Based on the data of VC and SA, the samples may be classified into three groups: (1) early-ripened cheeses with a salty taste, waxy to cheesy odor, and rubbery texture, (2) medium-ripened cheese with a sweet taste and cheesy odor, and (3) old-ripened cheese with a bitter taste, cheesy to pungent odor, a firm and fragile texture. Textural attributes were highly correlated with proteolysis indices and pH. The results of sensory desirability indicated a significant correlation with pungency, bitterness, and OAs. The cheese samples ripened on the day 127 were selected as the most desirable product. Ripening time had a significant effect on the chemical composition, especially on S/M, pH, and a_w  parameters, which determine the pattern as well as the intensity of biochemical pathways and the final sensory attributes. PRACTICAL APPLICATION: The current study intends to characterize and develop a standardized procedure for producing a traditional cheese called "Kope cheese" by determining the appropriate duration time for the ripening process, determining the main chemical/biochemical compounds that are highly correlated with its unique flavor and texture and distinguishing the key processing factors (such as curd salting, pH values during brining) that have to be altered or controlled carefully during the manufacturing process. The data would help cheese manufacturers determine the optimum time of ripening in order to achieve the best flavor and texture attributes in the final product.

The effect of complete replacing sodium with potassium, calcium, and magnesium brine on sodium-free ultrafiltration Feta cheese at the end of the 60-day ripening period: Physicochemical, proteolysis-lipolysis indices, microbial, colorimetric, and sensory evaluation

The effect of complete substitution of NaCl with KCl, MgCl2, and CaCl2 in brine used for the ripening stage in Na-free ultrafiltration (UF) Feta cheese making investigated. The chemical, microbial, textural, colorimetric, and sensory evaluation did at the end of the 60-day ripening period. As the ripening period of the cheese increased, the amount of acidity and total solid significantly increased while pH and moisture significantly decreased. All chloride salts exerted a significant antimicrobial effect on the fermentation growth cycle; particularly, CaCl2 showed a similar effect to NaCl, while KCl and MgCl2 were progressively less inhibitory. The highest hardness and syneresis on the first day seen in the samples containing sodium chloride and the lowest hardness and syneresis on the sixty day recognized in the samples containing magnesium chloride. There was no significant difference in whiteness index for monovalent salts in the first and sixtieth days of storage, and of course, this difference was not significant between divalent salts. There was no significant difference in overall acceptance score between sodium and potassium brine, although these two treatments had a significant difference compared with the others. There was no significant difference in the overall acceptance of cheeses stored in calcium and magnesium brine.

Physicochemical and textural characteristics and volatile compounds of semihard goat cheese as affected by starter cultures

Today, cheese is valued because of its high nutritional value and unique characteristics. Improving the texture and flavor of cheese by selecting suitable starter cultures is an important way to promote the development of cheese industry. The effect of starter cultures on the physicochemical and textural properties and volatile compounds during the ripening of semihard goat cheese were investigated in this work. Different starter cultures-mesophilic (M) and thermophilic starters (T), Lactobacillus plantarum ssp. plantarum ATCC 14917 (Lp), a mix of the M and T starters (M1), and mix of the M, T, and Lp starters (M2)-were used in the production of the goat cheeses. Volatile compounds were determined by a solid-phase microextraction/gas chromatography-mass spectrometric (SPME/GC-MS) method. The results showed that the moisture content of cheeses produced with the 5 kinds of starter cultures decreased after maturation, whereas ash content increased. The pH values of goat cheeses decreased first and then increased during maturity, and the pH value of M2 cheese was the lowest among the cheeses. The hardness and chewiness of the cheeses increased with increasing maturity, whereas cohesiveness, springiness, and resilience showed the opposite tendency. The 60-d-old cheese made with Lp had the highest chewiness, cohesiveness, springiness, and resilience, whereas the 60-d-old cheese made with M2 had the highest hardness. A total of 53 volatile components were identified by SPME/GC-MS, and carboxylic acids, alcohols, ketones, and esters were the 4 major contributors to the characteristic flavors of the cheeses. Volatile components and their contents differed greatly among the produced cheeses. The M2 cheese contained the highest relative content of the main volatile compounds (90.10%), especially butanoic acid and acetoin. Through a comprehensive comparison of the results, we concluded that M2 cheese had a dense texture and milky flavor, and M2 is a potential starter culture candidate for the production of goat cheese.

Fungal volatiles mediate cheese rind microbiome assembly

In vitro studies in plant, soil, and human systems have shown that microbial volatiles can mediate microbe-microbe or microbe-host interactions. These previous studies have often used artificially high concentrations of volatiles compared to in situ systems and have not demonstrated the roles volatiles play in mediating community-level dynamics. We used the notoriously volatile cheese rind microbiome to identify bacteria responsive to volatiles produced by five widespread cheese fungi. Vibrio casei had the strongest growth stimulation when exposed to all fungi. In multispecies community experiments, fungal volatiles caused a shift to a Vibrio-dominated community, potentially explaining the widespread occurrence of Vibrio in surface-ripened cheeses. RNA sequencing identified activation of the glyoxylate shunt as a possible mechanism underlying volatile-mediated growth promotion and community assembly. Our study demonstrates how airborne chemicals could be used to control the composition of microbiomes and illustrates how volatiles may impact the development of cheese rinds.

Adapting blood glucose meter biosensors for the measurement of lactose in dairy ingredients

Commonly used lactose assays [enzymatic spectrophotometric absorbance (EZA) and HPLC] for dairy ingredients are relatively expensive and time consuming. A blood glucose meter (BGM)-based method has successfully been documented as a rapid lactose assay in milk. However, the BGM-based method has not been evaluated in dairy ingredients. The objective of this study was to evaluate the BGM-based lactose analysis method in whey-derived (WD) and skim milk-derived (SMD) ingredients. The study was carried out in 4 phases. In phase 1, the effect of pH and lactose concentrations on the BGM reading was investigated using a factorial design with 2 factors: pH (6.02-7.50) and lactose (0.2 or 0.4%). We found that BGM readings were significantly affected by lower pH values at both lactose levels. In phase 2, the effect of total solids and ingredient type was investigated using a factorial design with 2 factors: ingredient type (WD or SMD) and total solids (0-8%). It was observed that the BGM reading was significantly affected by ingredient type and total solids. Phase 3 involved developing a linear relationship between the BGM reading and the EZA reference method to ascertain the accuracy of the proposed BGM method. Different ingredient types (WD or SMD) and non-lactose solids (0.5-27%) model ingredient dilutions prepared over a range of lactose contents (0.08-0.62%) were measured using the BGM and EZA methods. The average absolute percentage bias difference between the BGM method and EZA reference method results for these model dilutions was found to be between 2.2 and 7.3%. In phase 4, 15 samples procured from commercial sources ranging from 0.01 to 81.9% lactose were evaluated using the BGM method and EZA reference method. The average absolute percentage bias difference for lactose results between the 2 methods ranged from 3.6 to 5.0% and 5.3 to 9.7% for well-performing and poorly performing meters, respectively. Overall, the BGM method is a promising tool for rapid and low-cost analysis of lactose in both high-lactose and low-lactose dairy ingredients.

Reduced-sodium cheeses: Implications of reducing sodium chloride on cheese quality and safety

Sodium chloride (NaCl) universally well-known as table salt is an ancient food additive, which is broadly used to increase the storage stability and the palatability of foods. Though, in recent decades, use of table salt in foods is a major concern among the health agencies of the world owing to ill effects of sodium (Na) that are mostly linked to hypertension and cardiovascular diseases. As a result, food scientists are working to decrease the sodium content in food either by decreasing the rate of NaCl addition or by partial or full replacement of NaCl with other suitable salts like potassium chloride (KCl), calcium chloride (CaCl₂ ), or magnesium chloride (MgCl₂ ). However, in cheese, salt reduction is difficult to accomplish owing to its multifaceted role in cheese making. Considering the significant contribution in dietary salt intake (DSI) from cheese, researchers across the globe are exploring various technical interventions to develop reduced-sodium cheeses (RSCs) without jeopardizing the quality and safety of cheeses. Thus, the purpose of this study is to provide an insight of NaCl reduction on sensory, physicochemical, and technofunctional attributes of RSCs with an aim to explore various strategies for salt reduction without affecting the cheese quality and safety. The relationship between salt reduction and survival of pathogenic and spoilage-causing microorganisms and growth of RSCs microflora is also discussed. Based on the understanding of conceptual and applied information on the complex changes that occur in the development of RSCs, the quality and safety of RSCs can be accomplished effectively in order to reduce the DSI from cheese.

A pilot study on nutrients, antimicrobial proteins, and bacteria in commerce-free models for exchanging expressed human milk in the USA

Expressed human milk can be donated or sold through a variety of channels, including human milk banks, corporations or individuals, or peer-to-peer milk sharing. There is a paucity of research regarding the nutrient and bioactive profiles of expressed human milk exchanged through commerce-free scenarios, including peer-to-peer milk sharing. The study objective was to evaluate the macronutrient, antimicrobial protein, and bacteria composition in expressed human milk acquired via commerce-free arrangements. Expressed human milk samples were collected from the following commerce-free scenarios: milk expressed for a mother's or parent's own infant (MOM; N = 30); unpasteurized milk donated to a non-profit milk bank (BANKED; N = 30); milk expressed for peer-to-peer milk sharing (SHARED; N = 31); and health professional-facilitated milk sharing where donors are serologically screened and milk is dispensed raw (SCREENED; N = 30). Analyses were conducted for total protein, lactose, percent fat and water, lysozyme activity, immunoglobulin A (IgA) activity, total aerobic bacteria, coliform, and Staphylococcus aureus. No bacterial growth was observed in 52/121 samples, and 15/121 had growth greater than 5.0 log colony-forming units/mL. There was no evidence of differences by groups (p > .05) in lactose, fat, water, lysozyme activity, sIgA activity, aerobic bacteria, coliforms, and S. aureus. Mean protein values (95% confidence interval) were 1.5 g/dL (1.4, 1.6) for BANKED, 1.4 g/dL (1.3, 1.5) for MOM, 1.6 g/dL (1.5, 1.7) for SCREENED, and 1.5 g/dL (1.4, 1.6) for SHARED, which was not significantly different (p = .081). This research contributes to growing literature on the risks and benefits of uncompensated, peer-to-peer milk sharing.

Effect of Molasses and Dried Orange Pulp as Sheep Dietary Supplementation on Physico-Chemical, Microbiological and Fatty Acid Profile of Comisana Ewe's Milk and Cheese

The use of agro-industrial by-products for ruminant feed represents both an economical and environmental convenient way for reducing waste discharge and waste management costs for food industries. Large amounts of waste from citrus processing industries are available in Sicily, Italy. In the present study, the effect of dried citrus pulp as sheep dietary supplementation was evaluated on physico-chemical, microbiological and fatty acid composition of resulting milk and cheese. Pelleted feed integrated with molasses and blond orange pulp, replacing cane molasses, beet pulp and part of the maize and sunflower in ration, were administrated to ewes as an experimental treatment The experiment involved sixty Comisana breed sheep divided into two groups and two feeding trials (experimental and control). Ewe's milk and cheese samples were collected from January to April and analyzed for physico-chemical, microbiological and fatty acid profile composition. Results suggested that both the experimental milk and cheese were different from the controls. In particular, an increase of experimental milk yield and fat content were registered whilst the cheese samples exhibited a significant decrease of pH values and an increase in fat and protein contents. In addition, an increase of conjugated linoleic acids as well as of the oxidative stability were observed indicating the beneficial effect of dietary supplementation. Furthermore, among the main microbial groups, the experimental and control samples, no differences were detected. However, with the exception of streptococci, which was found higher in experimental cheeses, and staphylococci, which was significantly reduced by experimental feed. Moreover, the application of culture-independent methods highlighted the dominance of Lactobacillus rhamnosus/casei group in the experimental cheese, suggesting a driving role of the dietary supplementation in the cheese microbiota composition. The present study demonstrated that the inclusion of citrus by-products in the diet of small dairy ruminants is a promising feeding, which could positively affect milk composition and cheese manufacture.

Improving nitrogen source utilization from defatted soybean meal for nisin production by enhancing proteolytic function of Lactococcus lactis F44

Nisin, one kind of natural antimicrobial peptide, is produced by certain Lactococcus lactis strains, which generally require expensive high-quality nitrogen sources due to limited ability of amino acids biosynthesis. Here we use defatted soybean meal (DSM) as sole nitrogen source to support L. lactis growth and nisin production. DSM medium composition and fermentation conditions were optimized using the methods of Plackett-Burman design and central composite design. The highest nisin production of 3879.58 IU/ml was obtained in DSM medium, which was 21.3% higher than that of commercial medium. To further increase the utilization ability of nitrogen sources, we enhanced the proteolytic function in L. lactis through rationally expressing the related enzymes, which were selected according to the compositions of amino acids and molecular weight of peptides in DSM medium. Significantly, an artificial proteolytic system consisting of a heterologous protease (NprB), an oligopeptides transporter subunit (OppA) and two peptidases (PepF and PepM) was introduced into L.lactis. The constructed strain BAFM was capable of achieving efficient biomass accumulation and nisin yield with 30% decreased amount of DSM hydrolysates, which further reduced the cost of nisin production. The strategy described here offers opportunities for low-cost L. lactis fermentation and large-scale nisin production in industry.

In situ high-valued utilization and transformation of sugars from Dioscorea zingiberensis C.H. Wright for clean production of diosgenin

The industrial production of diosgenin in China generates a large amount of high-sugar wastes with low bioavailability, which causes serious pollution to the environment. In this study, a new clean and efficient process for the production of diosgenin was developed using sugars through in situ high-valued transformation. The sugar mixture from Dioscorea zingiberensis C.H. Wright contained abundant beneficial components. Nine typical microorganisms that produced intracellular products were evaluated. Saccharopolyspora spinosa was selected for recursive protoplast fusion to increase the spinosad yield by 46.3% compared with that of the wildtype. Diosgenin and spinosad co-production was conducted in a 100L bioreactor, with pH controlled by adding glucose. The biological oxygen demand of the effluent water decreased from 15,000mg/L to 450mg/L; hence, the proposed process is environment friendly.

Physicochemical and sensory characterization of Cheddar cheese with variable NaCl levels and equal moisture content

The present study investigated the effect of salt (NaCl) on the flavor and texture of Cheddar cheese with the particular aim to elucidate consequences of, and strategies for, reducing the salt concentration. Descriptive sensory analysis and physicochemical mapping of 9-mo-old Cheddar cheeses containing 0.9, 1.3, 1.7, and 2.3% salt and an equal level of moisture (37.6 ± 0.1%) were undertaken. Moisture regulation during manufacture resulted in slightly higher calcium retention (158 to 169 mmol/kg) with decreasing NaCl concentration. Lactose was depleted only at 0.9 and 1.3% salt, resulting in concomitantly higher levels of lactate. Lower levels of casein components and free amino acids were observed with decreasing NaCl concentration, whereas levels of pH 4.6-soluble peptides were higher. Key taste-active compounds, including small hydrophobic peptides, lactose, lactate, and free amino acids, covaried positively with bitter, sweet, sour, and umami flavor intensities, respectively. An additional direct effect of salt due to taste-taste enhancement and suppression was noted. Sensory flavor profiles spanned a principal component dimension of palatability projecting true flavor compensation of salt into the space between cheeses containing 1.7 and 2.3% salt. This space was characterized by salt, umami, sweet, and a range of sapid flavors, and was contrasted by bitter and other off-flavors. Rheological and sensory measurements of texture were highly correlated. Cheeses made with 2.3% salt had a longer and slightly softer texture than cheeses containing 0.9, 1.3, and 1.7% salt, which all shared similar textural properties. Moisture regulation contributed to restoring the textural properties upon a 50% reduction in salt, but other factors were also important. On the other hand, significant flavor deterioration occurred inevitably. We discuss the potential of engineering a favorable basic taste profile to restore full palatability of Cheddar with a 50% reduction in salt.

The effect of sodium reduction with and without potassium chloride on the survival of Listeria monocytogenes in Cheddar cheese

Sodium chloride (NaCl) in cheese contributes to flavor and texture directly and by its effect on microbial and enzymatic activity. The salt-to-moisture ratio (S/M) is used to gauge if conditions for producing good-quality cheese have been met. Reductions in salt that deviate from the ideal S/M range could result in changing culture acidification profiles during cheese making. Lactococcus lactis ssp. lactis or Lc. lactis ssp. cremoris are both used as cultures in Cheddar cheese manufacture, but Lc. lactis ssp. lactis has a higher salt and pH tolerance than Lc. lactis ssp. cremoris. Both salt and pH are used to control growth and survival of Listeria monocytogenes and salts such as KCl are commonly used to replace the effects of NaCl in food when NaCl is reduced. The objectives of this project were to determine the effects of sodium reduction, KCl use, and the subspecies of Lc. lactis used on L. monocytogenes survival in stirred-curd Cheddar cheese. Cheese was manufactured with either Lc. lactis ssp. lactis or Lc. lactis ssp. cremoris. At the salting step, curd was divided and salted with a concentration targeted to produce a final cheese with 600 mg of sodium/100 g (control), 25% reduced sodium (450 mg of sodium/100 g; both with and without KCl), and low sodium (53% sodium reduction or 280 mg of sodium/100 g; both with and without KCl). Potassium chloride was added on a molar equivalent to the NaCl it replaced to maintain an equivalent S/M. Cheese was inoculated with a 5-strain cocktail of L. monocytogenes at different times during aging to simulate postprocessing contamination, and counts were monitored over 27 or 50 d, depending on incubation temperature (12 or 5 °C, respectively). In cheese inoculated with 4 log₁₀ cfu of L. monocytogenes/g 2 wk after manufacture, viable counts declined by more than 3 log₁₀ cfu/g in all treatments over 60 d. When inoculated with 5 log₁₀ cfu/g at 3mo of cheese age, L. monocytogenes counts in Cheddar cheese were also reduced during storage, but by less than 1.5 log10 cfu/g after 50 d. However, cheese with a 50% reduction in sodium without KCl had higher counts than full-sodium cheese at the end of 50 d of incubation at 4 °C when inoculated at 3 mo. When inoculated at 8 mo postmanufacture, this trend was only observed in 50% reduced sodium with KCl, for cheese manufactured with both cultures. This enhanced survival for 50% reduced-sodium cheese was not seen when a higher incubation temperature (12 °C) was used when cheese was inoculated at 3 mo of age and monitored for 27 d (no difference in treatments was observed at this incubation temperature). In the event of postprocessing contamination during later stages of ripening, L. monocytogenes was capable of survival in Cheddar cheese regardless of which culture was used, whether or not sodium had been reduced by as much as 50% from standard concentrations, or if KCl had been added to maintain the effective S/M of full-sodium Cheddar cheese.

Comparative analysis of an intestinal strain of Bifidobacterium longum and a strain of Bifidobacterium animalis subspecies lactis in Cheddar cheese

Bifidobacteria cultures were incorporated into Cheddar cheeses to conduct a comparative analysis between the commercially available strain Bifidobacterium animalis ssp. lactis Bb-12 and the wild-type intestinal isolate, Bifidobacterium longum DJO10A. They were incorporated as starter adjuncts in separate vats and as a mixed culture, and survival through manufacturing and cheese ripening was assessed. For cheese using only Bb-12, the cells may have grown during cheese manufacture as 133% of the inoculum was incorporated into the cheese, resulting in 8.00 log cfu/g. Counts remained high during ripening showing less than 1 log decrease over a 12-mo period. For cheese using a mixed culture of Bb-12 and DJO10A, both strains were incorporated at much lower levels: 3.02 and 1.11%, respectively. This resulted in cheese with 6.00 and 5.04 log cfu/g for Bb-12 and DJO10A, respectively. Bifidobacteria survival rates were low, most likely due to the moisture of the cheese being below 38%. The Bb-12 demonstrated almost 100% viability during ripening. Numbers of DJO10A started to decline after 2 mo of ripening and dropped below the level of detection (2 log cfu/g) after 4.5 mo of ripening. Neither DJO10A nor Bb-12 fortified cheeses produced detectable amounts of organic acids during ripening other than lactic acid, indicating the lack of detectable metabolic contribution from bifidobacteria during cheese production and ripening such as production of acetic acid. To determine if sublethal stresses could improve the viability of DJO10A, 2 more vats were made, 1 with DJO10A exposed to sublethal acid, cold, and centrifugation stresses, and 1 exposed to none of these stresses. Although stress-primed DJO10A survived cheese manufacture better, as 72.8% were incorporated into the cheese compared with 41.1% of the unprimed, the statistical significance of this difference is unknown. In addition, the difference in moisture levels in the cheese cannot be excluded as influencing this difference. However, the rate of decline during ripening was similar for both. After 6 mo of ripening, cell counts in cheese were 4.68 and 4.24 log cfu/g for primed and unprimed cultures, respectively. These results suggest that whereas priming bifidobacteria with sublethal stresses before incorporation in a cheese fermentation may improve the number of viable cells that get incorporated into the cheese, it does not affect viability during cheese ripening.