Quantitative Analysis of Conebeam CT for Delineating Stents in Stent-Assisted Coil Embolization

Three-dimensional fusion imaging to assess apposition of low-profile visualized intraluminal support stent for intracranial aneurysm coiling

Objective

To investigate on three-dimensional (3D) fusion images the apposition of low-profile visualized intraluminal support (LVIS) stents in intracranial aneurysms after treatment and assess inter-rater reliability.

Materials and methods

Records of all patients with unruptured intracranial aneurysms who were treated with the LVIS stent were retrospectively accessed and included in this study. Two neurosurgeons evaluated the presence of malapposition between the vessel walls and the stent trunk (crescent sign) and the vessel wall and the stent edges (edge malappostion) on 3D fusion images. These images were high-resolution cone-beam computed tomography images of the LVIS stent fused with 3D-digital subtraction angiography images of the vessels. Associations between malapposition and aneurysm location were assessed by Fisher's exact test, and inter-rater agreement was estimated using Cohen's kappa statistic.

Results

Forty consecutive patients were included. In all patients, 3D fusion imaging successfully visualized the tantalum helical strands and the closed-cell structure of the nitinol material of the low-profile visualized intraluminal support. A crescent sign was observed in 27.5 % and edge malapposition in 47.5 % of the patients. Malapposition was not significantly associated with location (p = 0.23 crescent sign, p = 0.07 edge malapposition). Almost perfect (κ = 0.88) and substantial (κ = 0.76) agreements between the two raters were found for the detection of crescent signs and edge appositions, respectively.

Conclusions

3D fusion imaging provided clear visualization of the LVIS stent and parent arteries, and could detect malapposition with excellent inter-rater reliability. This technique may provide valuable guidance for surgeons in determining postoperative management.

Diluted contrast media combined with high-resolution C-arm CT for evaluating apposition of flow diversions in a porcine model

BACKGROUND

In intracranial stenting, good stent apposition is crucial, and high-resolution C-arm computer tomography (CT) is utilized to assess whether stent apposition is complete. This study was aimed at finding optimal hypertonic or isotonic contrast media injection concentration for high-resolution C-arm CT to assess apposition of flow diversion (FD) after carotid artery stenting in swine.

METHODS

Twelve FD stents were implanted into the left carotid artery of Bama swine through the endovascular method. During high-resolution C-arm CT scanning, 6%, 8%, 10%, 12%, and 14% dilution percentages of hypertonic contrast media (iopromide 370 mg/ml) and 10%, 12%, 14%, 16%, and 18% dilution percentages of isotonic contrast media (iodixanol 320 mg/ml) were separately injected. A radiologist and a neuro-interventional specialist evaluated and qualitatively scored the post-processed images, and intravascular ultrasound (IVUS) was used to verify the accuracy of these images.

RESULTS

Overall, 12 FD stents were implanted into the left common carotid artery of 12 swine, with a technical success rate of 100%. The best reconstructed images used to observe stent apposition were achieved with iopromide diluted to a concentration of 12% (all P < .05) or iodixanol diluted to a concentration of 16% (all P < .05). Malapposition was noted in one case, and good apposition was noted in 11 cases. These results were consistent with IVUS observations.

CONCLUSION

Injecting iopromide or iodixanol diluted to 12% or 16% during high-resolution C-arm CT scanning, respectively, can help evaluate FD stent apposition and obtain optimal image quality.

Virtual diluted cone beam CT for device apposition assessment during endovascular treatment of intracranial aneurysm: A technical note

The increasing use of embolization devices with suboptimal radio-opacity to treat intracranial aneurysm underscores the need for advanced imaging techniques to characterize device-vessel interactions more accurately. Contrast-diluted cone-beam CT is commonly used in neurointervention but requires additional technical refinements to improve endovascular treatment assessment. In this technical note, we describe the virtual dilution cone beam CT (VDCBCT), a technique that synthetizes non-contrast and contrast-enhanced CBCT images to virtually dilute iodinated contrast agents, thereby facilitating a more accurate assessment of embolization device apposition. Through a set of intracranial aneurysms treated with different embolization devices, we describe the VDCBCT protocol and its usefulness for device apposition confidence. VDCBCT may enhance the global understanding of neurovascular embolization treatments by providing improved visualization of target vessels and low-radio-opacity embolization devices, obviating the need for contrast dilution.

Silk + flow-diverter stent for the treatment of intracranial aneurysms associated with balloon angioplasty: A retrospective study

Background

The silk + flow-diverter stent is increasingly used to treat complex intracranial aneurysms including wide-neck and fusiform aneurysms. Balloon angioplasty has been used to better appose the flow diverter (FD) to the vessel wall and, thus, improve aneurysm occlusion rates and decrease periprocedural complications. Sparse data are available concerning the results of this technique. We report our experience with silk + FD associated with balloon angioplasty for the treatment of intracranial aneurysms.

Methods

A retrospective study was conducted on all patients treated by the silk + FD. Clinical charts, procedural data, and angiographic results were reviewed and compared between those treated with balloon angioplasty. A multivariate analysis was conducted to identify predictors of complications, occlusion, and outcome.

Results

Between July 2014 and May 2016, we identified 209 patients with 223 intracranial aneurysms. There were 176 (84.2%) women and 33 (15.8%) men. The most common stent size used was 4.5 mm in 101 patients (46.1%), followed by 4 mm in 57 patients (26%). Univariate analysis observed that stent diameter was significantly related to aneurysm occlusion (P < 0.05). Patients with more than 1 aneurysm treated with silk + stent have a 9.07 times greater chance of having complications in the procedure than patients with only 01 aneurysm (OR = 9.07; P = 0.0008). Patients who had angioplasty without the use of a balloon have a 13.69-times-higher risk of complications (OR = 13.69; P = 0.0003). Older age, larger aneurysms, and the use of more than 1 FD device were predictors of recanalization.

Conclusion

Endovascular treatment of intracranial aneurysms with the silk + FD associated with balloon angioplasty is a safe and effective therapeutic option. Balloon angioplasty in combination with FD lowers the risk of complications. Higher complication rates and worse outcomes are associated with older age and large aneurysms.

Application of High-Resolution Flat Detector Computed Tomography in Stent Implantation for Intracranial Atherosclerotic Stenosis

Objective

To evaluate the utility of high-resolution flat-detector computed tomography (HR-FDCT) compared with conventional flat-detector computed tomography (FDCT) for stent placement in symptomatic intracranial atherosclerotic stenosis (ICAS).

Methods

We retrospectively reviewed the clinical data of 116 patients with symptomatic ICAS who underwent stent implantation. Images were acquired using conventional FDCT [voxel size = 0.43 mm (isotropic)] and HR-FDCT [voxel size = 0.15 mm (isotropic)]. Immediately after stent deployment, dual-volume three-dimensional (3D) fusion images were obtained from 3D digital subtraction angiography (DSA) and HR-FDCT. The image quality for stent visualization was graded from 0 to 2 (0: not able to assess; 1: limited, but able to assess; 2: clear visualization), and the stent-expansion status (“full,” “under-expanded” or “poor apposition”) was recorded.

Results

A total of 116 patients with symptomatic ICAS were treated successfully using 116 stents (58 Neuroform^TM EZ, 42 Enterprise^TM, and 16 Apollo^TM). The mean pre-stent stenosis was 80.5 ± 6.4%, which improved to 20.8 ± 6.9% after stenting. Compared with FDCT, HR-FDCT improved visualization of the fine structures of the stent to improve the image quality that significantly (mean score: 1.63 ± 0.60 vs. 0.41 ± 0.59, P < 0.001). In 19 patients, stent under-expansion (n = 11) or poor apposition (n = 8) was identified by HR-FDCT but not by conventional FDCT. After balloon dilatation, stent malapposition was shown to have improved on HR-FDCT. None of the 19 patients with stent malapposition experienced short-term complications during hospitalization or had in-stent stenosis at 6-month follow-up.

Conclusion

High-resolution flat-detector computed tomography (HR-FDCT) improves visualization of the fine structures of intracranial stents deployed for symptomatic ICAS compared with that visualized using conventional FDCT. High-resolution flat-detector computed tomography improves assessment of stent deployment and could reduce the risk of complications.

Flow Diverter Apposition in Patients with Large or Giant Intracranial Aneurysms Evaluated on Three-Dimensional Fusion Images Acquired by High-Resolution Cone-Beam Computed Tomography and Digital Subtraction Angiography

OBJECTIVE

To investigate flow diverter (FD) apposition on fused images acquired by high-resolution cone-beam computed tomography (CBCT) and 3-dimensional (3D) digital subtraction angiography.

METHODS

Patients with large or giant internal carotid artery aneurysms treated with Pipeline FDs who underwent CBCT imaging at our institution between October 2016 and May 2019 were included. Two neurosurgeons measured the maximum malapposition between FDs and vessel walls on 3D fusion images of high-resolution CBCT images displaying the FD and 3D digital subtraction angiography images displaying the vessels. Associations between the relative malapposition, FD diameter, vessel diameter, proximal and distal vessel diameter discrepancy, and siphon angle were evaluated by linear regression analysis. Inter-rater and intermethod (3D and 2D image) agreements of the malapposition measurements were assessed by Bland-Altman analysis and by interclass correlation coefficients.

RESULTS

Images of 2 patients were excluded because of image artifacts or fusion errors, and 3D fusion images were acquired in the remaining 26 patients. Our results did not suggest that relative malapposition was associated with vessel diameter (P = 0.12), vessel diameter discrepancy (P = 0.60), or syphon angle (P = 0.34), but relative malapposition increased by an estimated 13% (95% confidence interval: 4%-23%, P = 0.006) for each 1 mm increase in FD diameter. Inter-rater and intermethod agreements for apposition measurements were excellent and good, respectively.

CONCLUSIONS

Three-dimensional fusion images provided clear visualization of structures of both the stent and parent artery with excellent diagnostic reliability. Careful deployment may be needed for FDs with larger diameters, as they tended to have larger relative malapposition.

Visualization of flow diverter stent wall apposition during intracranial aneurysm treatment using a virtually diluted cone beam CT technique (Vessel ASSIST)

PURPOSE

Flow diverters (FD) have poor radiopacity, challenging visualization of deployment and vessel wall apposition with conventional neuroimaging modalities. We evaluated a novel cone beam computed tomography (CT) imaging technique that allows virtual dilution (VD) of contrast media to facilitate workflow and ensure accurate assessment of FD wall apposition.

METHODS

We retrospectively evaluated all patients treated for intracranial aneurysms with FD at our institution between November 2018 and November 2019. Undiluted injected dual cone beam CT acquisitions performed post-stenting were displayed with VD software (GE Healthcare). The resulting images were compared with conventional two-dimensional (2D) digital subtraction angiography (DSA) images. Two neurointerventionalists (Reader 1 and Reader 2, (R1, R2)) independently assessed FD deployment and wall apposition. Confidence in the diagnosis, inter-reader agreement, and X-ray exposure were assessed.

RESULTS

A total of 27 cases were reviewed. FD deployment and wall apposition scores were 4.2 ± 1.0 (R1) and 4.0 ± 1.1 (R2) for DSA and 3.7 ± 1.2 (R1) and 4.1 ± 1.0 (R2) for VD. Confidence in the diagnosis was improved with VD, with scores of 3.7 ± 0.7 (R1) and 4.0 ± 0.7 (R2) using DSA and 4.9 ± 0.2 (R1) and 4.9 ± 0.2 (R2) using VD (P < 0.001). Inter-reader agreement using 2D DSA was improved from moderate (0.49324) to good (0.7272) (P < 0.0001). There were no significant differences in inter-reader agreement in the deployment assessment (P = 0.68) or dose-area product (P = 0.54) between techniques.

CONCLUSION

VD imaging with dual cone beam CT enables accurate assessment of FD wall apposition after deployment with greater confidence and improved inter-reader agreement versus conventional 2D DSA alone, with comparable X-ray exposure.

Visualization of stent apposition after stent-assisted coiling of intracranial aneurysms using high resolution 3D fusion images acquired by C-arm CT

Purpose

We used an imaging technique based on 3-dimensional (3D) C-arm CT to assess the apposition of three types of stents after coiling of intracranial aneurysms.

Methods

All patients with intracranial aneurysms were considered who received stent-assisted coiling with Enterprise2, Neuroform EZ, or Neuroform Atlas stents confirmed by C-arm CT imaging at our institution between June 2015 and November 2017. A 3D digital subtraction angiography (DSA) scan for vessel imaging followed by a high-resolution cone beam CT (HR-CBCT) scan for coil and stent imaging was performed. The images were fused to obtain dual volume 3D fusion images. We investigated malapposition of the stent trunk (crescent sign) and of the stent edges (edge malapposition) and used the χ² statistic to test for an association with stent types. Inter-rater agreement between two raters was estimated using Cohen’s kappa statistics.

Results

We evaluated 75 consecutive cases. Enterprise2 stents were used in 22 cases, Neuroform EZ in 26, and Neuroform Atlas in 27 cases. By stent type, crescent sign was detected in 27% of Enterprise2, 8% of Neuroform EZ, and none of Neuroform Atlas stents (p=0.007), while edge malapposition was detected in 27% of Enterprise2, 58% of Neuroform EZ, and 30% of Neuroform Atlas stents (p=0.05). Excellent (κ=0.81) and good (κ=0.78) agreement between the raters was found for the detection of edge apposition and crescent sign, respectively.

Conclusion

Stent malapposition was clearly visualized by dual volume 3D imaging. The Neuroform Atlas stents showed good apposition even in vessels with strong curvature.