Enhanced ε-Poly-L-Lysine Production by the Synergistic Effect of ε-Poly-L-Lysine Synthetase Overexpression and Citrate in Streptomyces albulus

Enhanced hypoxanthine utilization for cAMP salvage synthesis efficiently by Arthrobacter sp. CCTCC 2013431 via xanthine oxidase inhibition

When hypoxanthine was utilized as the activator for the salvage pathway in cAMP synthesis, xanthine oxidase would generate in quantity leading to low hypoxanthine conversion ratios and cell viability. To enhance cAMP salvage synthesis, fermentations with citrate/luteolin and hypoxanthine coupling added were conducted in a 7 L bioreactor and then multiple physiological indicators of fermentation with luteolin addition were assayed. Due to hypoxanthine feeding, cAMP productivity reached 0.066 g/(L·h) with 43.5% higher than control, however, cAMP synthesis, cell growth and glucose uptake all ceased at 50 h which was shortened by 22 h in comparison to control. The addition of citrate resulted in the cessation of fermentation at 61 h, on the contrary, owing to luteolin addition, cAMP fermentation performance was enhanced significantly during the whole fermentation period (72 h) with higher hypoxanthine conversion ratios and cAMP contents when compared with citrate and only hypoxanthine added batches. Multiple physiological indicators revealed that luteolin inhibited xanthine oxidase activity reducing hypoxanthine decomposition and ROS generation. ATP/AMP, NADH/NAD+ and NADPH/NADP+ were significantly increased especially at the late phase. Moreover, HPRT, PUP expression contents and corresponding gene transcription levels were also elevated. Luteolin could inhibit xanthine oxidase activity and further decrease hypoxanthine decomposition and ROS generation leading to higher hypoxanthine conversion and less cell damage for cAMP salvage synthesis efficiently.

Combinatorial strain improvement and bioprocess development for efficient production of ε-poly-L-lysine in Streptomyces albulus

ε-Poly-L-lysine (ε-PL) is an amino acid homopolymer with diverse potential applications in the food, pharmaceutical and cosmetic industries. To improve its biomanufacturing efficiency, strain engineering and bioprocess optimization were combined in this study. Firstly, a cocktail strain breeding strategy was employed to generate a ε-PL high-production mutant, Streptomyces albulus GS114, with enhanced L-lysine uptake capability. Subsequently, the L-lysine feeding conditions during fed-batch fermentation were systematically optimized to improve the L-lysine supply, resulting in ε-PL production reaching 73.1 ± 1.4 g/L in 5 L bioreactor. Finally, an engineered strain, S. albulus L2, with enhanced uptake capability and polymerization ability of L-lysine was constructed, achieving ε-PL production of 81.4 ± 5.2 g/L by fed-batch fermentation. This represents the highest reported production of ε-PL to date. This study provided an efficient production strategy for ε-PL and valuable insights into the high-value utilization of L-lysine.

Enhanced ε-Poly-L-Lysine Production in Streptomyces albulus through Multi-Omics-Guided Metabolic Engineering

Safe and eco-friendly preservatives are crucial to preventing food spoilage and illnesses, as foodborne diseases caused by pathogens result in approximately 600 million cases of illness and 420,000 deaths annually. ε-Poly-L-lysine (ε-PL) is a novel food preservative widely used in many countries. However, its commercial application has been hindered by high costs and low production. In this study, ε-PL's biosynthetic capacity was enhanced in Streptomyces albulus WG608 through metabolic engineering guided by multi-omics techniques. Based on transcriptome and metabolome data, differentially expressed genes (fold change >2 or <0.5; p < 0.05) and differentially expressed metabolites (fold change >1.2 or <0.8) were separately subjected to gene ontology (GO) and Kyoto Encyclopedia of Genes and Genomes (KEGG) pathway enrichment analysis. The integrative analysis of transcriptome, metabolome, and overexpression revealed the essential roles of isocitrate lyase, succinate dehydrogenase, flavoprotein subunit, diaminopimelate dehydrogenase, polyphosphate kinase, and polyP:AMP phosphotransferase in ε-PL biosynthesis. Subsequently, a strain with enhanced ATP supply, L-lysine supply, and ε-PL synthetase expression was constructed to improve its production. Finally, the resulting strain, S. albulus WME10, achieved an ε-PL production rate of 77.16 g/L in a 5 L bioreactor, which is the highest reported ε-PL production to date. These results suggest that the integrative analysis of the transcriptome and metabolome can facilitate the identification of key pathways and genetic elements affecting ε-PL synthesis, guiding further metabolic engineering and thus significantly enhancing ε-PL production. The method presented in this study could be applicable to other valuable natural antibacterial agents.

Engineering functional homopolymeric amino acids: from biosynthesis to design

Homopolymeric amino acids (HPAs) are a class of microbial polymers that can be classified into two categories: anionic and cationic HPAs. Notable examples include γ-poly-glutamic acid (γ-PGA) and ε-poly-L-lysine (ε-PL) that have wide-ranging applications in medicine, food, and agriculture. The primary method of manufacture is through microbial synthesis. In recent decades significant efforts have been made to enhance the production of HPAs, specifically focusing on γ-PGA and ε-PL. We comprehensively review current advances in understanding the synthetic mechanisms as well as metabolic engineering and fermentation process techniques to improve the production of HPAs. In addition, we discuss the major challenges and solutions associated with desired structure regulation of HPAs and the development of novel structures.

Design and optimization of ε-poly-l-lysine with specific functions for diverse applications

ε-Poly-l-lysine (ε-PL) is a natural homo-poly(amino acid) which can be produced by microorganisms. With the advantages in broad-spectrum antimicrobial activity, biodegradability, and biocompatibility, ε-PL has been widely used as a preservative in the food industry. Different molecular architectures endow ε-PL and ε-PL-based materials with versatile applications. However, the microbial synthesis of ε-PL is currently limited by low efficiencies in genetic engineering and molecular architecture modification. This review presents recent advances in ε-PL production and molecular architecture modification of microbial ε-PL, with a focus on the current challenges and solutions for the improvement of the productivity and diversity of ε-PL. In addition, we highlight recent examples where ε-PL has been applied to expand the versability of edible films and nanoparticles in various applications. Commercial production and the challenges and future research directions in ε-PL biosynthesis are also discussed. Currently, although the main use of ε-PL is as a food preservative, ε-PL and ε-PL-based polymers have shown excellent application potential in biomedical fields. With the development of synthetic biology, the design and synthesis of ε-PL with a customized molecular architecture are possible in the near future. ε-PL-based polymers with specific functions will be a new trend in biopolymer manufacturing.

Metabolic perturbation of Streptomyces albulus by introducing NADP-dependent glyceraldehyde 3-phosphate dehydrogenase

The available resources of Streptomyces represent a valuable repository of bioactive natural products that warrant exploration. Streptomyces albulus is primarily utilized in the industrial synthesis of ε-poly-L-lysine (ε-PL). In this study, the NADP-dependent glyceraldehyde 3-phosphate dehydrogenase (GapN) from Streptococcus mutans was heterologously expressed in S. albulus CICC11022, leading to elevated intracellular NADPH levels and reduced NADH and ATP concentrations. The resulting perturbation of S. albulus metabolism was comprehensively analyzed using transcriptomic and metabolomic methodologies. A decrease in production of ε-PL was observed. The expression of gapN significantly impacted on 23 gene clusters responsible for the biosynthesis of secondary metabolites. A comprehensive analysis revealed a total of 21 metabolites exhibiting elevated levels both intracellularly and extracellularly in the gapN expressing strain compared to those in the control strain. These findings underscore the potential of S. albulus to generate diverse bioactive natural products, thus offering valuable insights for the utilization of known Streptomyces resources through genetic manipulation.

Antibacterial activity of epsilon-poly-l-lysine produced by Stenotrophomonas maltophilia HS4 and Paenibacillus polymyxa HS5, alone and in combination with bacteriophages

Over the past decades, antibiotic resistance has become a major clinical problem, and searching for new therapeutic strategies seems to be necessary. Using novel natural compounds, antimicrobial peptides, and bacteriophages is the most promising solution. In this study, various cationic metabolite-producer bacteria were isolated from different soil samples. Two isolates were identified as Stenotrophomonas maltophilia HS4 (accession number: MW791428) and Paenibacillus polymyxa HS5 (accession number: MW791430) based on biochemical characteristics and phylogenetic analysis using 16S rRNA gene sequences. The cationic compound in the fermentation broth was precipitated and purified with sodium tetraphenylborate salt. The purified cationic peptide was confirmed to be epsilon-poly-l-lysine by structural and molecular analysis using High-Performance Liquid Chromatography, Sodium dodecyl-sulfate-polyacrylamide gel electrophoresis, and Fourier-transform infrared spectroscopy. The antibacterial activity of epsilon-poly-l-lysine was evaluated against Staphylococcus aureus ATCC 25923, Escherichia coli ATCC 25922, Enterococcus faecalis ATCC 29212, Serratia marcescens ATCC 13880, and Klebsiella pneumoniae ATCC 13883 by microdilution method. Furthermore, the antibacterial effects of purified epsilon-poly-l-lysine in combination with two long non-contractile tail bacteriophages against vancomycin-resistant Enterococcus faecalis and colistin-resistant Klebsiella pneumoniae were investigated. The results indicated great antibacterial activity of epsilon-poly-l-lysine which was produced by two novel bacteria. The epsilon-poly-l-lysine as a potent cationic antimicrobial peptide is demonstrated to possess great antimicrobial activity against pathogenic and also antibiotic-resistant bacteria.

Engineering Streptomyces albulus to enhance ε-poly-L-lysine production by introducing a polyphosphate kinase-mediated ATP regeneration system

BACKGROUND

ε-Poly-L-lysine (ε-PL) is a natural and safe food preservative that is mainly produced by filamentous and aerobic bacteria Streptomyces albulus. During ε-PL biosynthesis, a large amount of ATP is used for the polymerization of L-lysine. A shortage of intracellular ATP is one of the major factors limiting the increase in ε-PL production. In previous studies, researchers have mainly tried to increase the oxygen supply to enhance intracellular ATP levels to improve ε-PL production, which can be achieved through the use of two-stage dissolved oxygen control, oxygen carriers, heterologous expression of hemoglobin, and supplementation with auxiliary energy substrates. However, the enhancement of the intracellular ATP supply by constructing an ATP regeneration system has not yet been considered.

RESULTS

In this study, a polyphosphate kinase (PPK)-mediated ATP regeneration system was developed and introduced into S. albulus to successfully improve ε-PL production. First, polyP:AMP phosphotransferase (PAP) from Acinetobacter johnsonii was selected for catalyzing the conversion of AMP into ADP through an in vivo test. Moreover, three PPKs from different microbes were compared by in vitro and in vivo studies with respect to catalytic activity and polyphosphate (polyP) preference, and PPK2B^cg from Corynebacterium glutamicum was used for catalyzing the conversion of ADP into ATP. As a result, a recombinant strain PL05 carrying coexpressed pap and ppk2B^cg for catalyzing the conversion of AMP into ATP was constructed. ε-PL production of 2.34 g/L was achieved in shake-flask fermentation, which was an increase of 21.24% compared with S. albulus WG608; intracellular ATP was also increased by 71.56%. In addition, we attempted to develop a dynamic ATP regulation route, but the result was not as expected. Finally, the conditions of polyP₆ addition were optimized in batch and fed-batch fermentations, and the maximum ε-PL production of strain PL05 in a 5-L fermenter was 59.25 g/L by fed-batch fermentation, which is the highest ε-PL production reported in genetically engineered strains.

CONCLUSIONS

In this study, we proposed and developed a PPK-mediated ATP regeneration system in S. albulus for the first time and significantly enhanced ε-PL production. The study provides an efficient approach to improve the production of not only ε-PL but also other ATP-driven metabolites.

CRISPR/Cas9-Mediated Multi-Locus Promoter Engineering in ery Cluster to Improve Erythromycin Production in Saccharopolyspora erythraea

Erythromycins are a group of macrolide antibiotics produced by Saccharopolyspora erythraea. Erythromycin biosynthesis, which is a long pathway composed of a series of biochemical reactions, is precisely controlled by the type I polyketide synthases and accessary tailoring enzymes encoded by ery cluster. In the previous work, we have characterized that six genes representing extremely low transcription levels, SACE_0716-SACE_0720 and SACE_0731, played important roles in limiting erythromycin biosynthesis in the wild-type strain S. erythraea NRRL 23338. In this study, to relieve the potential bottlenecks of erythromycin biosynthesis, we fine-tuned the expression of each key limiting ery gene by CRISPR/Cas9-mediated multi-locus promoter engineering. The native promoters were replaced with different heterologous ones of various strengths, generating ten engineered strains, whose erythromycin productions were 2.8- to 6.0-fold improved compared with that of the wild-type strain. Additionally, the optimal expression pattern of multiple rate-limiting genes and preferred engineering strategies of each locus for maximizing erythromycin yield were also summarized. Collectively, our work lays a foundation for the overall engineering of ery cluster to further improve erythromycin production. The experience of balancing multiple rate-limiting factors within a cluster is also promising to be applied in other actinomycetes to efficiently produce value-added natural products.

Physiological analysis of the improved ε-polylysine production induced by reactive oxygen species

INTRODUCTION

Epsilon-poly-L-lysine (ε-PL) is produced by Streptomyces species in acidic and aerobic conditions, which inevitably induces rapid generation of reactive oxygen species (ROS). The devastating effects of ROS on biomolecules and cell vitality have been well-studied, while the positive effects of ROS are rarely reported.

RESULTS

In this study, we found that a proper dose of intracellular ROS (about 3.3 μmol H₂O₂ /g DCW) could induce a physiological modification to promote the ε-PL production (from 1.2 to 1.5 g/L). It resulted in larger sizes of colony and mycelial pellets as well as vibrant, aggregated, and more robust mycelia, which were of high capability of ROS detoxication. Physiological studies showed that appropriate doses of ROS activated the metabolism of the pentose phosphate pathway at both transcriptional and enzymatic levels, which was beneficial for biomass accumulation. The biosynthesis of lysine was also promoted in terms of transcriptional regulatory overexpression, increased transcription and enzymatic activity of key genes, larger pools of metabolites in the TCA cycle, replenishment pathway, and diaminoheptanedioic acid pathway. In addition, energy provision was ensured by activated metabolism of the TCA cycle, a larger pool of NADH, and higher activity of the electron transport system. Increased transcription of HrdD and pls further accelerated the ε-PL biosynthesis.

SIGNIFICANCE

These results indicated that ROS at proper intracellular dose could act as an inducing signal to activate the ε-PL biosynthesis, which laid a foundation for further process regulation to maintain optimal ROS dose in industrial ε-PL production and was of theoretical and practical significance.

KEY POINTS

• A proper dose of intracellular ROS positively influences the ε-PL production. • Proper dose of ROS enhanced the mycelial activity and antioxidative capability. • ROS increased lysine synthesis metabolism, energy provision and pls expression.

Integrative transcriptome and proteome revealed high-yielding mechanisms of epsilon-poly-L-lysine by Streptomyces albulus

Introduction

ε-poly-L-lysine (ε-PL) is a high value, widely used natural antimicrobial peptide additive for foods and cosmetic products that is mainly produced by Streptomyces albulus. In previous work, we developed the high-yield industrial strain S. albulus WG-608 through successive rounds of engineering.

Methods

Here, we use integrated physiological, transcriptomic, and proteomics association analysis to resolve the complex mechanisms underlying high ε-PL production by comparing WG-608 with the progenitor strain M-Z18.

Results

Our results show that key genes in the glycolysis, pentose phosphate pathway, glyoxylate pathway, oxidative phosphorylation, and L-lysine biosynthesis pathways are differentially upregulated in WG-608, while genes in the biosynthetic pathways for fatty acids, various branched amino acids, and secondary metabolite by-products are downregulated. This regulatory pattern results in the introduction of more carbon atoms into L-lysine biosynthesis and ε-PL production. In addition, significant changes in the regulation of DNA replication, transcription, and translation, two component systems, and quorum sensing may facilitate the adaptability to environmental pressure and the biosynthesis of ε-PL. Overexpression of ppk gene and addition of polyP₆ further enhanced the ε-PL production.

Discussion

This study enables comprehensive understanding of the biosynthetic mechanisms of ε-PL in S. albulus WG-608, while providing some genetic modification and fermentation strategies to further improve the ε-PL production.

Identification of a major facilitator superfamily protein that is beneficial to L-lactic acid production by Bacillus coagulans at low pH

BACKGROUND

Product inhibition is one of the major problems in lactic acid (LA) fermentation. Our previous study revealed that Bacillus coagulans 2-6 was an efficient producer of high-optical-purity L-LA. Its mutant strain B. coagulans Na-2 has better resistance to sodium lactate stress but the resistance mechanism has not been understood.

RESULTS

In this study, the whole-genome sequencing of B. coagulans Na-2 was performed and one mutant gene mfs coding for the major facilitator superfamily (MFS) protein was revealed by comparative genome analysis. Ten mutation sites were identified between the wild (MFS-2-6) and mutant (MFS-Na-2) proteins, among which T127A and N154T were predicted locating in the center of the transmembrane transport channel. The MFS-2-6 and MFS-Na-2 were expressed separately in a genetically operable strain, B. coagulans DSM1, using the genes' native promoter. The expression of the two MFS proteins had no effect and a negative effect on L-LA production when the pH was controlled at 6.0 and 7.0 by sodium hydroxide, respectively. However, 4.2 and 4.6-fold of L-LA concentrations were obtained at pH 5.0 by the strains expressing MFS-2-6 and MFS-Na-2 than that by the control strain, respectively. The intracellular pH values of the strains expressing MFS-2-6 and MFS-Na-2 were approximately 0.69 and 0.45 higher than that of the control strain during pH-controlled fermentation at 5.0. Results suggest that the expression of MFS-2-6 and MFS-Na-2 were both conducive to L-LA production at low pH, while the better performance of the latter was probably due to the more appropriate intracellular pH during the whole fermentation process.

CONCLUSIONS

The MFS protein identified here can improve the ability of B. coagulans to resist acidic environments and produce more L-LA at low pH. The MFS protein has an application potential in environment-friendly L-LA production.

Development of a thiostrepton-free system for stable production of PLD in Streptomyces lividans SBT5

BACKGROUND

Phospholipase D (PLD) is highly valuable in the food and medicine industries, where it is used to convert low-cost phosphatidylcholine into high-value phospholipids (PLs). Despite being overexpressed in Streptomyces, PLD production requires expensive thiostrepton feeding during fermentation, limiting its industrialization. To address this issue, we propose a new thiostrepton-free system.

RESULTS

We developed a system using a combinatorial strategy containing the constitutive promoter kasOp* and PLD G215S mutation fused to a signal peptide sigcin of Streptoverticillium cinnamoneum pld. To find a candidate vector, we first expressed PLD using the integrative vector pSET152 and then built three autonomously replicating vectors by substituting Streptomyces replicons to increase PLD expression. According to our findings, replicon 3 with stability gene (sta) inserted had an ideal result. The retention rate of the plasmid pOJ260-rep3-pld* was 99% after five passages under non-resistance conditions. In addition, the strain SK-3 harboring plasmid pOJ260-rep3-pld* produced 62 U/mL (3.48 mg/g) of PLD, which further improved to 86.8 U/mL (7.51 mg/g) at 32 °C in the optimized medium, which is the highest activity achieved in the PLD secretory expression to date.

CONCLUSIONS

This is the first time that a thiostrepton-free PLD production system has been reported in Streptomyces. The new system produced stable PLD secretion and lays the groundwork for the production of PLs from fermentation stock. Meanwhile, in the Streptomyces expression system, we present a highly promising solution for producing other complex proteins.

Transcriptomic and metabolomic analyses for providing insights into the influence of polylysine synthetase on the metabolism of Streptomyces albulus

ε-poly-L-lysine (ε-PL) is the main secondary metabolite of Streptomyces albulus, and it is widely used in the food industry. Polylysine synthetase (Pls) is the last enzyme in the ε-PL biosynthetic pathway. Our previous study revealed that Pls overexpressed in S. albulus CICC11022 result in the efficient production of ε-PL. In this study, a Pls gene knockout strain was initially constructed. Then, genomic, transcriptomic and metabolomic approaches were integrated to study the effects of the high expression and knockout of Pls on the gene expression and metabolite synthesis of S. albulus. The high expression of Pls resulted in 598 significantly differentially expressed genes (DEGs) and 425 known differential metabolites, whereas the inactivation of Pls resulted in 868 significant DEGs and 374 known differential metabolites. The expressions of 8 and 35 genes were negatively and positively associated with the Pls expression, respectively. Subsequently, the influence mechanism of the high expression and inactivation of Pls on the ε-PL biosynthetic pathway was elucidated. Twelve metabolites with 30% decreased yield in the high-expression strain of Pls but 30% increased production in the Pls knockout strain were identified. These results demonstrate the influence of Pls on the metabolism of S. albulus. The present work can provide the theoretical basis for improving the production capacity of ε-PL by means of metabolic engineering or developing bioactive substances derived from S. albulus.

Recent advances in microbial ε-poly-L-lysine fermentation and its diverse applications

The naturally occurring homo-polyamide biopolymer, ε-poly-L-lysine (ε-PL) consists of 25-35 L-lysine residues with amide linkages between α-carboxyl groups and ε-amino groups. ɛ-PL exhibits several useful properties because of its unusual structure, such as biodegradability, water solubility, no human toxicity, and broad-spectrum antibacterial activities; it is widely applied in the fields of food, medicine, clinical chemistry and electronics. However, current industrial production of ε-PL is only performed in a few countries. Based on an analysis of the physiological characteristics of ε-PL fermentation, current advances that enhance ε-PL fermentation, from strain improvement to product isolation are systematically reviewed, focusing on: (1) elucidating the metabolic pathway and regulatory mechanism of ε-PL synthesis; (2) enhancing biosynthetic performance through mutagenesis, fermentation optimization and metabolic engineering; and (3) understanding and improving the biological activity and functional properties of ε-PL. Finally, perspectives on engineering and exploiting ε-PL as a source material for the production of various advanced materials are also discussed, providing scientific guidelines for researchers to further improve the ε-PL fermentation process.

A Study of Type II ɛ-PL Degrading Enzyme (pldII) in Streptomyces albulus through the CRISPRi System

ε-Poly-L-lysine (ε-PL) is a widely used antibacterial peptide polymerized of 25–35 L-lysine residues. The antibacterial effect of ε-PL is closely related to the polymerization degree. However, the mechanism of ε-PL degradation in S. albulus remains unclear. This study utilized the integrative plasmid pSET152-based CRISPRi system to transcriptionally repress the ε-PL degrading enzyme (pldII). The expression of pldII is regulated by changing the recognition site of dCas9. Through the ε-PL bacteriostatic experiments of repression strains, it was found that the repression of pldII improves the antibacterial effect of the ε-PL product. The consecutive MALDI-TOF-MS results confirmed that the molecular weight distribution of the ε-PL was changed after repression. The repression strain S1 showed a particular peak with a polymerization degree of 44, and other repression strains also generated ε-PL with a polymerization degree of over 40. Furthermore, the homology modeling and substrate docking of pldII, a typical endo-type metallopeptidase, were performed to resolve the degradation mechanism of ε-PL in S. albulus. The hydrolysis of ε-PL within pldII, initiated from the N-terminus by two amino acid-binding residues, Thr194 and Glu281, led to varying levels of polymerization of ε-PL.

AdpA, a developmental regulator, promotes ε-poly-l-lysine biosynthesis in Streptomyces albulus

Background

AdpA is a global regulator of morphological differentiation and secondary metabolism in Streptomyces, but the regulatory roles of the Streptomyces AdpA family on the biosynthesis of the natural product ε-poly-l-lysine (ε-PL) remain unidentified, and few studies have focused on increasing the production of ε-PL by manipulating transcription factors in Streptomyces.

Results

In this study, we revealed the regulatory roles of different AdpA homologs in ε-PL biosynthesis and morphological differentiation and effectively promoted ε-PL production and sporulation in Streptomycesalbulus NK660 by heterologously expressing adpA from S.neyagawaensis NRRLB-3092 (adpA_Sn). First, we identified a novel AdpA homolog named AdpA_Sa in S.albulus NK660 and characterized its function as an activator of ε-PL biosynthesis and morphological differentiation. Subsequently, four heterologous AdpA homologs were selected to investigate their phylogenetic relationships and regulatory roles in S.albulus, and AdpA_Sn was demonstrated to have the strongest ability to promote both ε-PL production and sporulation among these five AdpA proteins. The ε-PL yield of S.albulus heterologously expressing adpA_Sn was approximately 3.6-fold higher than that of the control strain. Finally, we clarified the mechanism of AdpA_Sn in enhancing ε-PL biosynthesis and its effect on ε-PL polymerization degree using real-time quantitative PCR, microscale thermophoresis and MALDI-TOF–MS. AdpA_Sn was purified, and its seven direct targets, zwf, tal, pyk2, pta, ack, pepc and a transketolase gene (DC74_2409), were identified, suggesting that AdpA_Sn may cause the redistribution of metabolic flux in central metabolism pathways, which subsequently provides more carbon skeletons and ATP for ε-PL biosynthesis in S.albulus.

Conclusions

Here, we characterized the positive regulatory roles of Streptomyces AdpA homologs in ε-PL biosynthesis and their effects on morphological differentiation and reported for the first time that AdpA_Sn promotes ε-PL biosynthesis by affecting the transcription of its target genes in central metabolism pathways. These findings supply valuable insights into the regulatory roles of the Streptomyces AdpA family on ε-PL biosynthesis and morphological differentiation and suggest that AdpA_Sn may be an effective global regulator for enhanced production of ε-PL and other valuable secondary metabolites in Streptomyces.

Supplementary Information

The online version contains supplementary material available at 10.1186/s12934-022-01785-6.

Epsilon-poly-L-lysine: Recent Advances in Biomanufacturing and Applications

ε-poly-L-lysine (ε-PL) is a naturally occurring poly(amino acid) of varying polymerization degree, which possesses excellent antimicrobial activity and has been widely used in food and pharmaceutical industries. To provide new perspectives from recent advances, this review compares several conventional and advanced strategies for the discovery of wild strains and development of high-producing strains, including isolation and culture-based traditional methods as well as genome mining and directed evolution. We also summarize process engineering approaches for improving production, including optimization of environmental conditions and utilization of industrial waste. Then, efficient downstream purification methods are described, including their drawbacks, followed by the brief introductions of proposed antimicrobial mechanisms of ε-PL and its recent applications. Finally, we discuss persistent challenges and future perspectives for the commercialization of ε-PL.

Efficient production of ε-poly-l-lysine using cassava starch and fish meal by Streptomyces albulus FQC-24

ε-Poly-l-lysine (ε-PL) is used as a natural food preservative which consists of l-lysine units connected. However, due to the expensive culture medium, the production cost of ε-PL remains high. In this study, cheap raw materials cassava starch (CS) and fish meal (FM) were employed by S. albulus FQC-24 for ε-PL production. In the single factor experiment, the maximum ε-PL production reached 0.97 g/L at 60 g/L CS and 15 g/L FM. The results of screening experiments by Plackett-Burman design showed that three main components affecting ε-PL production were CS, FM, and (NH₄)₂SO₄. And the standardized effects of CS, FM, and (NH₄)₂SO₄ were 0.13, -0.22, and -0.2, respectively. The optimum fermentation medium developed by response surface methodology for ε-PL production contained (g/L) CS, 67.56; FM, 14.70 and (NH₄)₂SO₄, 5.41. Under the optimum conditions, the ε-PL production was achieved 1.30 g/L, with 34.02% higher than that before optimization. Moreover, ε-PL productions of batch and fed-batch fermentation in a 7-L fermentor were improved to 2.13 and 17.17 g/L respectively, which increased by 0.64 and 12.2 times compared with the shake flask culture. The results indicated that FM and CS are promising substrates for the efficient production of ε-PL.

Enhanced endogenous amino acids and energy metabolism level for cAMP biosynthesis by Arthrobacter sp. CCTCC 2013431 with citrate as cosubstrate

OBJECTIVES

In our previous study, citrate was used as auxiliary energy substance for improving cAMP fermentation performance, however, the regulation mechanism of citrate on improved cAMP contents was not clear. To elucidate the regulation mechanism, cAMP fermentations with/without citrate addition were conducted in a 7 L fermentor using Arthrobacter sp. CCTCC 2013431 and assays on key enzymes activities, energy metabolism level, amino acids contents and peroxidation level were performed.

RESULTS

With 3 g/L-broth sodium citrate added, cAMP concentration and conversion yield from glucose reached 4.34 g/L and 0.076 g/g which were improved by 30.7% and 29.8%, respectively, when compared with those of control. Citrate changed carbon flux distribution among different routes and more carbon flux was directed into pentose phosphate pathway beneficial to cAMP synthesis. Meanwhile, energy metabolism together with precursor amino acids levels were improved significantly owing to strengthened metabolic intensity of tricarboxylate cycle by exogenous citrate utilization which provided energy and substance basis for cAMP production. Moreover, higher glutamate synthesis and oxidative stress caused by citrate addition consumed excessive NADPH derived from pentose phosphate pathway by which feedback suppression for pentose phosphate pathway was relieved efficiently.

CONCLUSION

Citrate promoted cAMP fermentation production by Arthrobacter sp. CCTCC 2013431 due to enhanced precursor amino acids, energy metabolism level and relieved feedback suppression for pentose phosphate pathway.