Automation of Dead End Filtration: An Enabler for Continuous Processing of Biotherapeutics

A Cyber-Physical Production System for the Integrated Operation and Monitoring of a Continuous Manufacturing Train for the Production of Monoclonal Antibodies

The continuous manufacturing of biologics offers significant advantages in terms of reducing manufacturing costs and increasing capacity, but it is not yet widely implemented by the industry due to major challenges in the automation, scheduling, process monitoring, continued process verification, and real-time control of multiple interconnected processing steps, which must be tightly controlled to produce a safe and efficacious product. The process produces a large amount of data from different sensors, analytical instruments, and offline analyses, requiring organization, storage, and analyses for process monitoring and control without compromising accuracy. We present a case study of a cyber-physical production system (CPPS) for the continuous manufacturing of mAbs that provides an automation infrastructure for data collection and storage in a data historian, along with data management tools that enable real-time analysis of the ongoing process using multivariate algorithms. The CPPS also facilitates process control and provides support in handling deviations at the process level by allowing the continuous train to re-adjust itself via a series of interconnected surge tanks and by recommending corrective actions to the operator. Successful steady-state operation is demonstrated for 55 h with end-to-end process automation and data collection via a range of in-line and at-line sensors. Following this, a series of deviations in the downstream unit operations, including affinity capture chromatography, cation exchange chromatography, and ultrafiltration, are monitored and tracked using multivariate approaches and in-process controls. The system is in line with Industry 4.0 and smart manufacturing concepts and is the first end-to-end CPPS for the continuous manufacturing of mAbs.

Reviewing the process intensification landscape through the introduction of a novel, multitiered classification for downstream processing

A demand for process intensification in biomanufacturing has increased over the past decade due to the ever-expanding market for biopharmaceuticals. This is largely driven by factors such as a surge in biosimilars as patents expire, an aging population, and a rise in chronic diseases. With these market demands, pressure upon biomanufacturers to produce quality products with rapid turnaround escalates proportionally. Process intensification in biomanufacturing has been well received and accepted across industry based on the demonstration of its benefits of improved productivity and efficiency, while also reducing the cost of goods. However, while these benefits have been shown empirically, the challenges of adopting process intensification into industry remain, from smaller independent start-up to big pharma. Traditionally, moving from batch to a process intensification scheme has been viewed as an "all or nothing" approach involving continuous bioprocessing, in which the factors of complexity and significant capital costs hinder its adoption. In addition, the literature is crowded with a variety of terms used to describe process intensification (continuous, periodic counter-current, connected, intensified, steady-state, etc.). Often, these terms are used inappropriately or as synonyms, which generates confusion in the field. Through a detailed review of current state-of-the-art systems, consumables, and process intensification case studies, we herein propose a defined approach in the implementation of downstream process intensification through a standardized nomenclature and viewing it as distinct independent levels. These can function separately as intensified single-unit operations or be built upon by integration with other process steps allowing for simple, incremental, cost-effective implementation of process intensification in the manufacturing of biopharmaceuticals.

Integration of a perfusion reactor and continuous precipitation in an entirely membrane-based process for antibody capture

Continuous precipitation coupled with continuous tangential flow filtration is a cost-effective alternative for the capture of recombinant antibodies from crude cell culture supernatant. The removal of surge tanks between unit operations, by the adoption of tubular reactors, maintains a continuous harvest and mass flow of product with the advantage of a narrow residence time distribution (RTD). We developed a continuous process implementing two orthogonal precipitation methods, CaCl2 precipitation for removal of host-cell DNA and polyethylene glycol (PEG) for capturing the recombinant antibody, with no influence on the glycosylation profile. Our lab-scale prototype consisting of two tubular reactors and two stages of tangential flow microfiltration was continuously operated for up to 8 days in a truly continuous fashion and without any product flow interruption, both as a stand-alone capture and as an integrated perfusion-capture. Furthermore, we explored the use of a negatively charged membrane adsorber for flow-through anion exchange as first polishing step. We obtained a product recovery of approximately 80% and constant product quality, with more than two logarithmic reduction values (LRVs) for both host-cell proteins and host-cell DNA by the combination of the precipitation-based capture and the first polishing step.

Continuous manufacturing of monoclonal antibodies: Dynamic control of multiple integrated polishing chromatography steps using BioSMB

We propose a strategy for automation and control of multi-step polishing chromatography in integrated continuous manufacturing of monoclonal antibodies. The strategy is demonstrated for a multi-step polishing process consisting of cation exchange chromatography in bind-and-elute mode followed by mixed-mode chromatography in flowthrough mode. A BioSMB system with a customized Python control layer is used for automation and scheduling of both the chromatography steps. Further, the BioSMB valve manifold is leveraged for in-line conditioning between the two steps, as tight control of pH and conductivity is essential when operating with multimodal resins because even slight fluctuations in load conditions adversely affect the chromatography performance. The pH and conductivity of the load to the multimodal chromatography columns is consistent, despite the elution gradient of the preceding cation exchange chromatography step. Inputs from the BioSMB pH and conductivity sensors are used for real-time control of the 7 pumps and 240 valves to achieve in-line conditioning inside the BioSMB manifold in a fully automated manner. This is confirmed by showcasing different elution strategies in cation exchange chromatography, including linear gradient, step gradient and process deviations like tubing leakage. In all the above cases, the model was able to maintain the pH and conductivity of multimodal chromatography load within the range of 6 ± 0.1 pH and 7 ± 0.3 mS/cm conductivity. The strategy eliminates the need for using multiple BioSMB units or integrating external pumps, valves, mixers, surge tanks, or sensors between the two steps as is currently the standard approach, thus offering a simple and robust structure for integrating multiple polishing chromatography steps in continuous downstream monoclonal antibody purification trains.

Continuous integrated manufacturing for biopharmaceuticals: A new paradigm or an empty promise?

Continuous integrated bioprocessing has elicited considerable interest from the biopharma industry for the many purported benefits it promises. Today many major biopharma manufacturers around the world are engaged in the development of continuous process platforms for their products. In spite of great potential, the path toward continuous integrated bioprocessing remains unclear for the biologics industry due to legacy infrastructure, process integration challenges, vague regulatory guidelines, and a diverging focus toward novel therapies. In this article, we present a review and perspective on this topic. We explore the status of the implementation of continuous integrated bioprocessing among biopharmaceutical manufacturers. We also present some of the key hurdles that manufacturers are likely to face during this implementation. Finally, we hypothesize that the real impact of continuous manufacturing is likely to come when the cost of manufacturing is a substantial portion of the cost of product development, such as in the case of biosimilar manufacturing and emerging economies.

Use of Monte Carlo simulations for improved facility fit planning in downstream biomanufacturing and technology transfer

Biologics manufacturing is capital and consumable intensive with need for advanced inventory planning to account for supply chain constraints. Early-stage process design and technology transfer are often challenging due to limited information on process variability regarding bioreactor titer, process yield, and product quality. Monte Carlo (MC) methods offer a stochastic modeling approach for process optimization where probabilities of occurrence for process inputs are incorporated into a deterministic model to simulate more likely scenarios for process outputs. In this study, we explore MC simulation-based design of a monoclonal antibody downstream manufacturing process. We demonstrate that this probabilistic approach offers more representative outcomes over the conventional worst-case approach where the theoretical minimum and maximum values of each process parameter are used without consideration for their probability of occurrence. Our work demonstrates case studies on more practically sizing unit operations to improve consumable utilization, thereby reducing manufacturing costs. We also used MC simulations to minimize process cadence by constraining the number of cycles per unit operation to fit facility preferences. By factoring in process uncertainty, we have implemented MC simulation-based facility fit analyses to efficiently plan for inventory when accounting for process constraints during technology transfer from lab-scale to clinical or commercial manufacturing.

Continuous manufacturing of monoclonal antibodies: Automated downstream control strategy for dynamic handling of titer variations

Handling long-term dynamic variability in harvest titer is a critical challenge in continuous downstream manufacturing. This challenge is becoming increasingly important with the advent of high-titer clones and modern upstream perfusion processes where the titer can vary significantly across the course of a campaign. In this paper, we present a strategy for real-time, dynamic adjustment of the entire downstream train, including capture chromatography, viral inactivation, depth filtration, polishing chromatography, and single-pass formulation, to accommodate variations in titer from 1-7 g/L. The strategy was tested in real time in a continuous downstream purification process of 36 h duration with induced titer variations. The dynamic control strategy leverages real-time NIR-based concentration sensors in the harvest material to continuously track the titer, integrated with an in-house Python-based control system that operates a BioSMB for carrying out capture and polishing chromatography, as well as a series of pumps and solenoid valves for carrying out viral inactivation and formulation. A set of 9 different methods, corresponding to the different harvest titers have been coded onto the Python controller. The methods have a varying number of chromatography columns (3-6 for Protein A and 2-10 for CEX), designed to ensure proper scheduling and optimize productivity across the entire titer variation space. The approach allows for a wide range of titers to be processed on a single integrated setup without having to change equipment or to re-design each time. The strategy also overcomes a key unexplored challenge in continuous processing, namely hand-shaking the downstream train to upstream conditions with long-term titer variability while maintaining automated operation with high productivity and robustness.

Enablers of continuous processing of biotherapeutic products

The benefits of continuous processing over batch manufacturing are widely acknowledged across the biopharmaceutical industry, primary of which are higher productivity and greater consistency in product quality. Furthermore, the reduced equipment and facility footprint lead to significantly lower capital costs. Technology enablers have a major role in this migration from batch to continuous processing. In this review, we highlight the various enablers that are facilitating adoption of continuous upstream and downstream bioprocessing. This includes new bioreactors and cell retention devices for upstream operations, and on-column and continuous flow refolding, novel continuous chromatography, and single-pass filtration systems for downstream processes. We also elucidate the significant roles of process integration and control as well as of data analytics in these processes.

Complete or periodic continuity in continuous manufacturing platforms for production of monoclonal antibodies?

BACKGROUND

Monoclonal antibodies (mAbs) currently dominate the biotherapeutic market. This has resulted in significant efforts towards the development of a continuous integrated platform for the manufacturing of mAbs.

MAIN METHODS AND MAJOR RESULTS

In this study, a continuous mAb platform has been developed consisting of an Acoustic Wave Separator, a Cadence BioSMB PD system, a customized coiled flow reactor, a modular single-pass TFF kit, an in-line diafiltration module, and a continuous dead-end filtration skid. A three-step chromatographic purification was performed in the platform consisting of Protein A capture chromatography followed by an anion exchange membrane directly coupled to a cation exchange chromatography. Two operational case studies have been executed on the platform, namely complete continuous ("CC") and periodic continuous ("PC") modes of operation. The CC mode was designed to ensure that each unit operation had completely continuous inflow and outflow by increasing the number of columns, filtration modules and tanks, while the PC mode operated in periodic pulses with scheduled flow and hold steps. Both modes were designed to handle the same flow rate and titers from the upstream bioreactor or fed-batch harvest tank, and were compared in terms of productivity and operational complexity. Both modes offer viable options for continuous processing of mAbs and result in achievement of target critical quality attribute profiles of the final drug product over 24 h of operation.

CONCLUSIONS AND IMPLICATIONS

It was found that the CC mode was superior in terms of specific productivity (20-50% higher) and consumable utilization (20% lower resin utilization), while the PC mode was operationally simpler and had lower facility costs due to significant reductions in the number of auxiliary equipment (pumps, columns, tanks, and valves). The work successfully highlighted the pros and cons of both approaches, and demonstrates that while several groups have amply shown the superiority of continuous processing over batch mode, there are intermediate variants which may be optimal in a given situation.

Control of surge tanks for continuous manufacturing of monoclonal antibodies

Surge tanks are critical but often overlooked enablers of continuous bioprocessing. They provide multiple benefits including dampening of concentration gradients and allowing process resumption efforts in case of equipment failure or unexpected deviations, which can occur during a continuous campaign of weeks or months. They are also useful in enabling steady-state operation across a continuous train by facilitating mass balance between unit operations such as chromatography which have periodic loading and elution cycles. In this paper, we propose a design of a system of surge tanks for a monoclonal antibody (mAb) production process consisting of cell culture, clarification, capture chromatography, viral inactivation, polishing chromatography, and single-pass ultrafiltration and diafiltration. A Python controller has been developed for robust control of the continuous train. The controller has four layers, namely data acquisition, process scheduling, deviation handling, and real-time execution. A set of general guidelines for surge tank placement and sizing have been proposed together with process control strategies based on the design space of the individual unit operations, failure modes analysis of the different equipment, and expected variability in the process feed streams for both fed-batch and perfusion bioreactors. The control system has been successfully demonstrated for several continuous runs of up to 36 h in duration and is able to leverage surge tanks for robust control of the continuous train in the face of product variability as well as process errors while maintaining critical quality attributes. The proposed set of strategies for surge tank control are adaptable to most continuous processing setups for mAbs, and together form the first framework that can fully realize the benefits of surge tanks in continuous bioprocessing.

Process Analytical Technology for Precipitation Process Integration into Biologics Manufacturing towards Autonomous Operation—mAb Case Study

The integration of real time release testing into an advanced process control (APC) concept in combination with digital twins accelerates the process towards autonomous operation. In order to implement this, on the one hand, measurement technology is required that is capable of measuring relevant process data online, and on the other hand, a suitable model must be available to calculate new process parameters from this data, which are then used for process control. Therefore, the feasibility of online measurement techniques including Raman-spectroscopy, attenuated total reflection Fourier transformed infrared spectroscopy (ATR-FTIR), diode array detector (DAD) and fluorescence is demonstrated within the framework of the process analytical technology (PAT) initiative. The best result is achieved by Raman, which reliably detected mAb concentration (R2 of 0.93) and purity (R2 of 0.85) in real time, followed by DAD. Furthermore, the combination of DAD and Raman has been investigated, which provides a promising extension due to the orthogonal measurement methods and higher process robustness. The combination led to a prediction for concentration with a R2 of 0.90 ± 3.9% and for purity of 0.72 ± 4.9%. These data are used to run simulation studies to show the feasibility of process control with a suitable digital twin within the APC concept.