Fermentative Production of l-2-Hydroxyglutarate by Engineered Corynebacterium glutamicum via Pathway Extension of l-Lysine Biosynthesis

Development of a 2-hydroxyglutarate production system by Corynebacterium glutamicum

2-Oxoglutarate (2-OG) is a tricarboxylate cycle intermediate that can be biologically converted into several industrially important compounds. However, studies on the fermentative production of compounds synthesized from 2-OG, but not via glutamate (defined as 2-OG derivatives), have been limited. Herein, a system that can efficiently produce 2-hydroxyglutarate (2-HG), a 2-OG derivative biosynthesized by the hgdH-encoded NADH-dependent 2-HG dehydrogenase of Acidaminococcus fermentans, was developed as a model using Corynebacterium glutamicum. First, the D3 strain, which lacked the two NADH-consuming enzymes, lactate dehydrogenase and malate dehydrogenase, as well as isocitrate lyase, was constructed as a starting strain. Next, the growth conditions that induced the accumulation of 2-OG were investigated, and it was found that the biotin- and nitrogen-limited (B/N-limited) aerobic growth conditions were suitable for this purpose. Finally, the hgdH gene of A. fermentans became overexpressed in the D3 strain by inserting it into the intergenic regions with the strong constitutive promoter of the tuf gene of C. glutamicum; the engineered strain was cultured under the B/N-limited aerobic growth conditions. The engineered strain produced 80.1 mM 2-HG with a yield of 0.390 mol/mol glucose, which are the highest titer and yield reported thus far, to the best of our knowledge. Furthermore, reverse genetics showed that the produced 2-HG was partially exported via the YggB protein (NCgl1221 protein, a mechanosensitive channel) known as an exporter for glutamate under the conditions used herein. KEY POINTS: • An efficient 2-HG production system was developed with Corynebacterium glutamicum. • Biotin- and nitrogen-limited aerobic growth conditions induced 2-OG production. • Produced 2-HG was partially excreted via the glutamate exporter, YggB.

From Aquaculture to Aquaculture: Production of the Fish Feed Additive Astaxanthin by Corynebacterium glutamicum Using Aquaculture Sidestream

Circular economy holds great potential to minimize the use of finite resources, and reduce waste formation by the creation of closed-loop systems. This also pertains to the utilization of sidestreams in large-scale biotechnological processes. A flexible feedstock concept has been established for the industrially relevant Corynebacterium glutamicum, which naturally synthesizes the yellow C50 carotenoid decaprenoxanthin. In this study, we aimed to use a preprocessed aquaculture sidestream for production of carotenoids, including the fish feed ingredient astaxanthin by C. glutamicum. The addition of a preprocessed aquaculture sidestream to the culture medium did not inhibit growth, obviated the need for addition of several components of the mineral salt's medium, and notably enhanced production of astaxanthin by an engineered C. glutamicum producer strain. Improved astaxanthin production was scaled to 2 L bioreactor fermentations. This strategy to improve astaxanthin production was shown to be transferable to production of several native and non-native carotenoids. Thus, this study provides a proof-of-principle for improving carotenoid production by C. glutamicum upon supplementation of a preprocessed aquaculture sidestream. Moreover, in the case of astaxanthin production it may be a potential component of a circular economy in aquaculture.

Rational Engineering of Non-Ubiquinone Containing Corynebacterium glutamicum for Enhanced Coenzyme Q10 Production

Coenzyme Q₁₀ (CoQ₁₀) is a lipid-soluble compound with important physiological functions and is sought after in the food and cosmetic industries owing to its antioxidant properties. In our previous proof of concept, we engineered for CoQ₁₀ biosynthesis the industrially relevant Corynebacterium glutamicum, which does not naturally synthesize any CoQ. Here, liquid chromatography–mass spectrometry (LC–MS) analysis identified two metabolic bottlenecks in the CoQ₁₀ production, i.e., low conversion of the intermediate 10-prenylphenol (10P-Ph) to CoQ₁₀ and the accumulation of isoprenologs with prenyl chain lengths of not only 10, but also 8 to 11 isopentenyl units. To overcome these limitations, the strain was engineered for expression of the Ubi complex accessory factors UbiJ and UbiK from Escherichia coli to increase flux towards CoQ₁₀, and by replacement of the native polyprenyl diphosphate synthase IspB with a decaprenyl diphosphate synthase (DdsA) to select for prenyl chains with 10 isopentenyl units. The best strain UBI6-Rs showed a seven-fold increased CoQ₁₀ content and eight-fold increased CoQ₁₀ titer compared to the initial strain UBI4-Pd, while the abundance of CoQ₈, CoQ₉, and CoQ₁₁ was significantly reduced. This study demonstrates the application of the recent insight into CoQ biosynthesis to improve metabolic engineering of a heterologous CoQ₁₀ production strain.

Metabolic Engineering of Corynebacterium glutamicum for Sustainable Production of the Aromatic Dicarboxylic Acid Dipicolinic Acid

Dipicolinic acid (DPA) is an aromatic dicarboxylic acid that mediates heat-stability and is easily biodegradable and non-toxic. Currently, the production of DPA is fossil-based, but bioproduction of DPA may help to replace fossil-based plastics as it can be used for the production of polyesters or polyamides. Moreover, it serves as a stabilizer for peroxides or organic materials. The antioxidative, antimicrobial and antifungal effects of DPA make it interesting for pharmaceutical applications. In nature, DPA is essential for sporulation of Bacillus and Clostridium species, and its biosynthesis shares the first three reactions with the L-lysine pathway. Corynebacterium glutamicum is a major host for the fermentative production of amino acids, including the million-ton per year production of L-lysine. This study revealed that DPA reduced the growth rate of C. glutamicum to half-maximal at about 1.6 g·L⁻¹. The first de novo production of DPA by C. glutamicum was established by overexpression of dipicolinate synthase genes from Paenibacillus sonchi genomovar riograndensis SBR5 in a C. glutamicum L-lysine producer strain. Upon systems metabolic engineering, DPA production to 2.5 g·L⁻¹ in shake-flask and 1.5 g·L⁻¹ in fed-batch bioreactor cultivations was shown. Moreover, DPA production from the alternative carbon substrates arabinose, xylose, glycerol, and starch was established. Finally, expression of the codon-harmonized phosphite dehydrogenase gene from P. stutzeri enabled phosphite-dependent non-sterile DPA production.

Genomics Characterization of an Engineered Corynebacterium glutamicum in Bioreactor Cultivation Under Ionic Liquid Stress

Corynebacterium glutamicum is an ideal microbial chassis for production of valuable bioproducts including amino acids and next generation biofuels. Here we resequence engineered isopentenol (IP) producing C. glutamicum BRC-JBEI 1.1.2 strain and assess differential transcriptional profiles using RNA sequencing under industrially relevant conditions including scale transition and compare the presence vs absence of an ionic liquid, cholinium lysinate ([Ch][Lys]). Analysis of the scale transition from shake flask to bioreactor with transcriptomics identified a distinct pattern of metabolic and regulatory responses needed for growth in this industrial format. These differential changes in gene expression corroborate altered accumulation of organic acids and bioproducts, including succinate, acetate, and acetoin that occur when cells are grown in the presence of 50 mM [Ch][Lys] in the stirred-tank reactor. This new genome assembly and differential expression analysis of cells grown in a stirred tank bioreactor clarify the cell response of an C. glutamicum strain engineered to produce IP.

Aerobic Utilization of Methanol for Microbial Growth and Production

Methanol is a reduced one-carbon (C1) compound. It supports growth of aerobic methylotrophs that gain ATP from reduced redox equivalents by respiratory phosphorylation in their electron transport chains. Notably, linear oxidation of methanol to carbon dioxide may yield three reduced redox equivalents if methanol oxidation is NAD-dependent as, e.g., in Bacillus methanolicus. Methanol has a higher degree of reduction per carbon than glucose (6 vs. 4), and thus, lends itself as an ideal carbon source for microbial production of reduced target compounds. However, C-C bond formation in the RuMP or serine cycle, a prerequisite for production of larger molecules, requires ATP and/or reduced redox equivalents. Moreover, heat dissipation and a high demand for oxygen during catabolic oxidation of methanol may pose challenges for fermentation processes. In this chapter, we summarize metabolic pathways for aerobic methanol utilization, aerobic methylotrophs as industrial production hosts, strain engineering, and methanol bioreactor processes. In addition, we provide technological and market outlooks.

Coproduction of 5-Aminovalerate and δ-Valerolactam for the Synthesis of Nylon 5 From L-Lysine in Escherichia coli

The compounds 5-aminovalerate and δ-valerolactam are important building blocks that can be used to synthesize bioplastics. The production of 5-aminovalerate and δ-valerolactam in microorganisms provides an ideal source that reduces the cost. To achieve efficient biobased coproduction of 5-aminovalerate and δ-valerolactam in Escherichia coli, a single biotransformation step from L-lysine was constructed. First, an equilibrium mixture was formed by L-lysine α-oxidase RaiP from Scomber japonicus. In addition, by adjusting the pH and H₂O₂ concentration, the titers of 5-aminovalerate and δ-valerolactam reached 10.24 and 1.82 g/L from 40 g/L L-lysine HCl at pH 5.0 and 10 mM H₂O₂, respectively. With the optimized pH value, the δ-valerolactam titer was improved to 6.88 g/L at pH 9.0 with a molar yield of 0.35 mol/mol lysine. The ratio of 5AVA and δ-valerolactam was obviously affected by pH value. The ratio of 5AVA and δ-valerolactam could be obtained in the range of 5.63:1-0.58:1 at pH 5.0-9.0 from the equilibrium mixture. As a result, the simultaneous synthesis of 5-aminovalerate and δ-valerolactam from L-lysine in Escherichia coli is highly promising. To our knowledge, this result constitutes the highest δ-valerolactam titer reported by biological methods. In summary, a commercially implied bioprocess developed for the coproduction of 5-aminovalerate and δ-valerolactam using engineered Escherichia coli.

Utilization of a Wheat Sidestream for 5-Aminovalerate Production in Corynebacterium glutamicum

Production of plastics from petroleum-based raw materials extensively contributes to global pollution and CO2 emissions. Biotechnological production of functionalized monomers can reduce the environmental impact, in particular when using industrial sidestreams as feedstocks. Corynebacterium glutamicum, which is used in the million-ton-scale amino acid production, has been engineered for sustainable production of polyamide monomers. In this study, wheat sidestream concentrate (WSC) from industrial starch production was utilized for production of l-lysine-derived bifunctional monomers using metabolically engineered C. glutamicum strains. Growth of C. glutamicum on WSC was observed and could be improved by hydrolysis of WSC. By heterologous expression of the genes xylA Xc B Cg (xylA from Xanthomonas campestris) and araBAD Ec from E. coli, xylose, and arabinose in WSC hydrolysate (WSCH), in addition to glucose, could be consumed, and production of l-lysine could be increased. WSCH-based production of cadaverine and 5-aminovalerate (5AVA) was enabled. To this end, the lysine decarboxylase gene ldcC Ec from E. coli was expressed alone or for conversion to 5AVA cascaded either with putrescine transaminase and dehydrogenase genes patDA Ec from E. coli or with putrescine oxidase gene puo Rq from Rhodococcus qingshengii and patD Ec . Deletion of the l-glutamate dehydrogenase-encoding gene gdh reduced formation of l-glutamate as a side product for strains with either of the cascades. Since the former cascade (ldcC Ec -patDA Ec ) yields l-glutamate, 5AVA production is coupled to growth by flux enforcement resulting in the highest 5AVA titer obtained with WSCH-based media.

Adaptive laboratory evolution accelerated glutarate production by Corynebacterium glutamicum

BACKGROUND

The demand for biobased polymers is increasing steadily worldwide. Microbial hosts for production of their monomeric precursors such as glutarate are developed. To meet the market demand, production hosts have to be improved constantly with respect to product titers and yields, but also shortening bioprocess duration is important.

RESULTS

In this study, adaptive laboratory evolution was used to improve a C. glutamicum strain engineered for production of the C5-dicarboxylic acid glutarate by flux enforcement. Deletion of the L-glutamic acid dehydrogenase gene gdh coupled growth to glutarate production since two transaminases in the glutarate pathway are crucial for nitrogen assimilation. The hypothesis that strains selected for faster glutarate-coupled growth by adaptive laboratory evolution show improved glutarate production was tested. A serial dilution growth experiment allowed isolating faster growing mutants with growth rates increasing from 0.10 h-1 by the parental strain to 0.17 h-1 by the fastest mutant. Indeed, the fastest growing mutant produced glutarate with a twofold higher volumetric productivity of 0.18 g L-1 h-1 than the parental strain. Genome sequencing of the evolved strain revealed candidate mutations for improved production. Reverse genetic engineering revealed that an amino acid exchange in the large subunit of L-glutamic acid-2-oxoglutarate aminotransferase was causal for accelerated glutarate production and its beneficial effect was dependent on flux enforcement due to deletion of gdh. Performance of the evolved mutant was stable at the 2 L bioreactor-scale operated in batch and fed-batch mode in a mineral salts medium and reached a titer of 22.7 g L-1, a yield of 0.23 g g-1 and a volumetric productivity of 0.35 g L-1 h-1. Reactive extraction of glutarate directly from the fermentation broth was optimized leading to yields of 58% and 99% in the reactive extraction and reactive re-extraction step, respectively. The fermentation medium was adapted according to the downstream processing results.

CONCLUSION

Flux enforcement to couple growth to operation of a product biosynthesis pathway provides a basis to select strains growing and producing faster by adaptive laboratory evolution. After identifying candidate mutations by genome sequencing causal mutations can be identified by reverse genetics. As exemplified here for glutarate production by C. glutamicum, this approach allowed deducing rational metabolic engineering strategies.

Engineering the Cad pathway in Escherichia coli to produce glutarate from L-lysine

For the efficient industrial production of glutarate, an important C5 platform chemical that is widely used in the chemical and pharmaceutical industries, a five-enzyme cascade pathway was designed and reconstructed in vitro to synthesize glutarate from L-lysine. Then, the imbalanced enzyme expression levels of L-lysine decarboxylase from Escherichia coli (EcCA), putrescine aminotransferase (KpcPA) and γ-aminovaleraldehyde dehydrogenase (KpcPD) from Klebsiella pneumoniae, and the poor catalytic efficiency of KpcPA were identified as the rate-limiting bottlenecks. To this end, ribosome binding site regulation was employed to coordinate the enzyme molar ratio of EcCA:KpcPA:KpcPD at approximately 4:8:7 (the optimum ratio obtained in vitro), and volume scanning and hydrophobicity scanning were applied to increase KpcPA activity toward cadaverine from 15.89 ± 0.52 to 75.87 ± 1.51 U·mg^-1. Furthermore, the extracellular accumulation of 5-aminovalerate (5AVA) was considerably reduced by overexpressing gabP encoding the 5AVA importer. Combining these strategies into the engineered strain Glu-02, 77.62 g/L glutarate, the highest titer by E. coli to date, was produced from 100 g/L L-lysine in 42 h, with a yield and productivity of 0.78 g/g L-lysine and 1.85 g/L/h, respectively, at a 5-L scale. The results presented here provide a novel and potential enzymatic process at industrial-scale to produce glutarate from cheaper amino acids. KEY POINTS: • The bioconversion of l-lysine to glutarate using the Cad pathway was first achieved. • Enhancing the conversion efficiency of the Cad route maximizes glutarate in E. coli. • Achieving the highest titer of glutarate by E. coli to date.