Polydopamine Coating-Mediated Immobilization of BMP-2 on Polyethylene Terephthalate-Based Artificial Ligaments for Enhanced Bioactivity

Application of Nondegradable Synthetic Materials for Tendon and Ligament Injury

Tendon and ligament injuries, prevalent requiring surgical intervention, significantly impact joint stability and function. Owing to excellent mechanical properties and biochemical stability, Nondegradable synthetic materials, including polyethylene terephthalate (PET) and polytetrafluoroethylene (PTFE), have demonstrated significant potential in the treatment of tendon and ligament injuries. These above materials offer substantial mechanical support, joint mobility, and tissue healing promotion of the shoulder, knee, and ankle joint. This review conclude the latest development and application of nondegradable materials such as artificial patches and ligaments in tendon and ligament injuries including rotator cuff tears (RCTs), anterior cruciate ligament (ACL) injuries, and Achilles tendon ruptures.

High-Performance Artificial Ligament Made from Helical Polyester Fibers Wrapped with Aligned Carbon Nanotube Sheets

Repairing high-load connective tissues, such as ligaments, by surgically implanting artificial grafts after injury is challenging because they lack biointegration with host bones for stable interfaces. Herein, a high-performance helical composite fiber (HCF) ligament by wrapping aligned carbon nanotube (CNT) sheets around polyester fibers is proposed. Anterior cruciate ligament (ACL) reconstruction surgery shows that HCF grafts could induce effective bone regeneration, thus allowing the narrowing of bone tunnel defects. Such repair of the bone tunnel is in strong contrast to the tunnel enlargement of more than 50% for commercial artificial ligaments made from bare polyester fibers. Rats reconstructed with this HCF ligament show normal jumping, walking, and running without limping. This work allows bone regeneration in vivo through a one-step surgery without seeding cells or transforming growth factors, thereby opening an avenue for high-performance artificial tissues.

Sequential intervention of anti-inflammatory and osteogenesis with silk fibroin coated polyethylene terephthalate artificial ligaments for anterior cruciate ligament reconstruction

Graft-host integration after the anterior cruciate ligament (ACL) reconstruction sequentially follows the prognosis from the inflammation period to the regeneration period. However, due to insufficient bioactivity, polyethylene terephthalate (PET) artificial ligaments often require a long period for graft-host integration. To improve graft-host integration, sequential therapy targeting multifactor is widely advocated. In this study, a multilayer regenerated silk fibroin (RSF) coating loaded with heparin and bone morphogenetic protein binding peptide (BBP) for differentiated release was introduced on the surface of the PET artificial ligament by a stepwise deposition method. The drug release profiles of heparin and BBP on the coated PET artificial ligament indicated the features of differential drug release, i.e., with heparin in the outermost layer releasing a significant amount (more than 60%) during the first 5 days while BBP in the inner layer only releasing a small amount (ca. 30%) within 1 week without burst release. Based on the isometric ACL reconstruction model of rabbits, such drug-loaded RSF coating was verified to be able to modulate the early inflammatory response and promote the maturation of the graft in the articular cavity, meanwhile, it provided a continuous and stable signal of osteogenic induction to improve graft-bone integration. Thus, sequential intervention with heparin and BBP proved to be a reliable combination, and multifunctional RSF-coated PET artificial ligaments hold great potential for improving the clinical efficacy of ACL reconstruction.

Synthetic grafts for anterior cruciate ligament reconstructive surgery

The quest for a good and durable substitute to anterior cruciate ligament (ACL) is driving scientists to explore new promising areas of research. Autologous and allogenic ligament reconstruction bring satisfactory results in managing ACL surgery although their use is associated with significant drawbacks. To overcome the limitations of biologic grafts, many artificial devices have been developed and implanted as a substitute to the native ACL over the past decades. Although many synthetic grafts used in the past have been withdrawn from the market due to early mechanical failures ultimately leading to synovitis and osteoarthritis, there is recently a resurgence of interest in the use of synthetic ligaments for ACL reconstruction. However, this new generation of artificial ligaments, despite promising initial results, have shown to produce serious side effects such as high rupture rates, insufficient tendon-bone healing and loosening. For these reasons, recent advancements in biomedical engineering are focusing on improving technical features of artificial ligaments combining mechanical properties to biocompatibility. Bioactive coatings and surface modification methods have been proposed to enhance synthetic ligament biocompatibility and promote osseointegration. The path to the development of a safe and effective artificial ligament is still full of challenges, however recent advancements are leading the way towards a tissue-engineered substitute to the native ACL.

Strategies of immobilizing BMP-2 with 3D-printed scaffolds to improve osteogenesis

The management and definitive treatment of critical-size bone defects in severe trauma, tumor resection and congenital malformation are troublesome for orthopedic surgeons and patients worldwide without recognized good treatment strategies. Researchers and clinicians are working to develop new strategies to treat these problems. This review aims to summarize the techniques used by additive manufacturing scaffolds loaded with BMP-2 to promote osteogenesis and to analyze the current status and trends in relevant clinical translation. Optimize composite scaffold design to enhance bone regeneration through printing technology, material selection, structure design and loading methods of BMP-2 to advance the clinical therapeutic bone repair field.

Impregnation of polyethylene terephthalate (PET) grafts with BMP-2 loaded functional nanoparticles for reconstruction of anterior cruciate ligament

Current artificial ligaments based on polyethylene terephthalate (PET) are associated with some disadvantages due to their hydrophobicity and low biocompatibility. In this study, we aimed to modify the surface of PET using polyethylene glycol (PEG)-terminated polystyrene (PS)-linoleic nanoparticles (PLinaS-g-PEG-NPs). We accomplished that BMP-2 in two different concentrations encapsulated in nanoparticles with an efficiency of 99.71 ± 1.5 and 99.95 ± 2.8%. While the dynamic contact angle of plain PET surface reduced from 116° to 115° after a measurement periods of 10 s, that of PLinaS-g-PEG-NPs modified PET from 80° to 17.5° within 0.35 s. According to in vitro BMP2 release study, BMP-2 was released 13.12 ± 1.76% and 45.47 ± 1.78% from 0.05 and 0.1BMP2-PLinaS-g-PEG-NPs modified PET at the end of 20 days, respectively. Findings from this study revealed that BMP2-PLinaS-g-PEG-NPs has a great potential to improve the artificial PET ligaments, and could be effectively applied for ACL reconstruction.

Nerve Decellularized Matrix Composite Scaffold With High Antibacterial Activity for Nerve Regeneration

Nerve decellularized matrix (NDM) has received much attention due to its natural composition and structural advantages that had proven to be an excellent candidate for peripheral nerve regeneration. However, NDM with simultaneous biocompatibility, promoting nerve regeneration, as well as resistant to infection was rarely reporter. In this study, a porous NDM-CS scaffold with high antimicrobial activity and high biocompatibility was prepared by combining the advantages of both NDM and chitosan (CS) in a one-step method. The NDM-CS scaffold possessed high porosity and hydrophilicity, exhibited excellent biocompatibility which was suitable for cell growth and nutrient exchange. Meanwhile, NDM-CS scaffold had a significant antibacterial effect on both Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus), which could avoid wound infection during the repair process. In addition, the NDM-CS scaffold could support the growth and viability of Schwann cells effectively. Among them, the E2C1 group had the strongest ability to enhance proliferation, polarization and migration of Schwann cells among the three groups. The positive effect on Schwann cells indicated their ability in the process of nerve injury repair. Therefore, this NDM-CS scaffold may have potential prospects for application in neural tissue engineering.