A biomimetic synthetic nanofiber-based model for anterior cruciate ligament regeneration

Collagen molecular organization preservation in human fascia lata and periosteum after tissue engineering

Large bone defect regeneration remains a major challenge for orthopedic surgeons. Tissue engineering approaches are therefore emerging in order to overcome this limitation. However, these processes can alter some of essential native tissue properties such as intermolecular crosslinks of collagen triple helices, which are known for their essential role in tissue structure and function. We assessed the persistence of extracellular matrix (ECM) properties in human fascia lata (HFL) and periosteum (HP) after tissue engineering processes such as decellularization and sterilization. Harvested from cadaveric donors (N = 3), samples from each HFL and HP were decellularized following five different chemical protocols with and without detergents (D1-D4 and D5, respectively). D1 to D4 consisted of different combinations of Triton, Sodium dodecyl sulfate and Deoxyribonuclease, while D5 is routinely used in the institutional tissue bank. Decellularized HFL tissues were further gamma-irradiated (minimum 25 kGy) in order to study the impact of sterilization on the ECM. Polarized light microscopy (PLM) was used to estimate the thickness and density of collagen fibers. Tissue hydration and content of hydroxyproline, enzymatic crosslinks, and non-enzymatic crosslinks (pentosidine) were semi-quantified with Raman spectroscopy. ELISA was also used to analyze the maintenance of the decorin (DCN), an important small leucine rich proteoglycan for fibrillogenesis. Among the decellularization protocols, detergent-free treatments tended to further disorganize HFL samples, as more thin fibers (+53.7%) and less thick ones (-32.6%) were recorded, as well as less collagen enzymatic crosslinks (-25.2%, p = 0.19) and a significant decrease of DCN (p = 0.036). GAG content was significantly reduced in both tissue types after all decellularization protocols. On the other hand, HP samples were more sensitive to the D1 detergent-based treatments, with more disrupted collagen organization and greater, though not significant loss of enzymatic crosslinks (-37.4%, p = 0.137). Irradiation of D5 HFL samples, led to a further and significant loss in the content of enzymatic crosslinks (-29.4%, p = 0.037) than what was observed with the decellularization process. Overall, the results suggest that the decellularization processes did not significantly alter the matrix. However, the addition of a gamma-irradiation is deleterious to the collagen structural integrity of the tissue.

The relationship between lateral femoral condyle ratio measured by MRI and anterior cruciate ligament injury

Background

Previous studies have shown that the lateral femoral condyle ratio (LFCR) measured by X-ray has a significant relationship with the anterior cruciate ligament (ACL) injury. However, few relevant studies have been performed on LFCR measured by magnetic resonance imaging (MRI).

Purpose

(1) To evaluate the relationship between LFCR measured by MRI and ACL injury or rerupture. (2) To compare the LFCR measured by MRI with existing bony morphological risk factors and screen out the most predictive risk factors for primary ACL injury or rerupture.

Study Design

Cohort study; Level of evidence, 3.

Methods

Totally 147 patients who underwent knee arthroscopic surgery from 2015 to 2019 with minimum follow-up of 48 months were retrospectively evaluated. Patients were placed into three groups: 1) the control group of patients with simple meniscus tears without ligament injury; 2) the primary noncontact ACL injury group; 3) ACL rerupture group (ACL reconstruction failure). The LFCR measured by MRI and other previous known risk factors associated with MRI (notch width index, medial tibial slope, lateral tibial slope, medial tibial depth, lateral tibial height) were performed to evaluate their predictive value for ACL injury and rerupture. All the risk factors with p < 0.01 according to univariate analysis were included in the logistic regression models. Receiver operating characteristic (ROC) curves were analyzed for sensitivity, specificity, cut-off, and area under the curve (AUC). Z tests were used to compare the AUC values.

Results

The LFCR measured by MRI was obviously higher in primary ACL injury group (0.628 ± 0.020) and in ACL rerupture group (0.625 ± 0.021) than that in the control group (0.593 ± 0.030). The best risk factor was the LFCR with a cut-off of 0.602 (AUC, 0.818; 95% CI, 0.748-0.878; sensitivity, 90%; specificity, 66%). When combined with lateral tibial slope (cutoff, 7°) and lateral tibial height (cutoff, 3.6 mm), the diagnostic performance was improved significantly (AUC, 0.896; 95% CI, 0.890-0.950; sensitivity, 87%; specificity, 80%).

Conclusion

The increased LFCR measured by MRI was associated with a significantly higher risk for ACL injury or rerupture. The combination of LFCR, lateral tibial slope and lateral tibial height were the most predictive risk factors. This may help clinicians identify susceptible individuals and allow precision approaches for better prevention, treatment and management of this disease.

Plastic and elastic biomechanical properties of anterior cruciate ligament autografts

BACKGROUND

Anterior cruciate ligament (ACL) rupture is a common orthopedic injury, occurring in roughly 68.6 per 100,000 persons annually, with the primary treatment option being ACL reconstruction. However, debate remains about the appropriate graft type for restoring the native biomechanical properties of the knee. Furthermore, plastic graft elongation may promote increased knee laxity and instability without rupture. This study aims to investigate the plastic properties of common ACL-R graft options.

METHODS

Patellar tendon (PT), hamstring tendon (HT), and quadriceps tendon (QT) grafts were harvested from 11 cadaveric knees (6 male and 5 female) with a mean age of 71(range 55-81). All grafts were mechanically tested under uniaxial tension until failure to determine each graft's elastic and plastic biomechanical properties.

RESULTS

Mechanically, the QT graft was the weakest, exhibiting the lowest failure force and the lowest failure stress (QT < HT, p = 0.032). The PT was the stiffest of the grafts, having a significantly higher stiffness (PT > QT, p = 0.0002) and Young's modulus (PT > QT, p = 0.001; PT > HT, p = 0.041). The HT graft had the highest plastic elongation at 4.01 ± 1.32 mm (HT > PT, p = 0.002). The post-yield behavior of the HT tendon shows increased energy storage capabilities with the highest plastic energy storage (HT > QT, p = 0.012) and the highest toughness (HT > QT, p = 0.032).

CONCLUSION

Our study agrees with prior studies indicating that the failure load of all grafts is above the requirements for everyday activities. However, grafts may be susceptible to yielding before failure during daily activities. This may result in the eventual loss of functionality for the neo-ACL, resulting in increased knee laxity and instability.

Braided biomimetic PCL grafts for anterior cruciate ligament repair and regeneration

Anterior cruciate ligament (ACL) is a knee joint stabilizer with a limited regeneration capacity mainly because of low cellular content. State-of-the-art procedures are unable to restore the functions of the tissue as demonstrated by limited success rates. Regenerative engineering can offer a solution for restoring the functions of torn/ruptured ligaments provided that biomimetic grafts are available as grafts/scaffolds. However, a model construct to test behavior of cells to better understand the healing mechanism of ACL is still missing. This study, firstly, aimed at creating an injured rabbit ACL model. Then, the injured and healthy ACL tissues were characterized in terms of alignment and diameter distributions of collagen fibrils. Next, polycaprolactone (PCL) grafts were prepared from braided electrospun meshes and were characterized in terms of alignment and diameter distributions of fibers. Finally, biomechanical properties of ACL tissue and mechanical properties of PCL grafts were determined and compared. Findings demonstrated that distributions of the fiber diameters of PCL electrospun grafts were similar to diameter distribution of collagens of healthy and injured rabbit ACL. The novelty of this study relies on the determination of the diameter distribution of collagens of healthy and injured rabbit ACL tissues, and fabrication of PCL grafts with diameter distributions similar to that seen in healthy and injured ACLs. This study is significant because it addresses a worldwide clinical problem associated with millions of patients. The fibrous biomimetic graft designed in this study is different from the traditional grafts that exhibit unimodal distribution, and it is expected to have a significant contribution to ACL regeneration efforts.

Cobweb-Inspired Micro/Nanostructured Scaffolds for Soft Tissue Regeneration with Inhibition Effect of Fibrosis under Dynamic Environment

In soft tissue repair, fibrosis can lead to repair failure and long-term chronic pain in patients. Excessive mechanical stimulation of fibroblasts is one of the causes of fibrosis during abdominal wall regeneration. Inspired by the cobweb, a polycaprolactone beaded fiber is prepared by electrospinning. The cobweb-inspired structure attenuates the mechanical stimulation of cells under a dynamic environment. Nano-protrusions are introduced into the scaffold for further inhibition of fibrosis by self-induced crystallization. A machine is built for in vitro dynamic culture and rat abdominal subcutaneous embedding experiments are performed to verify the inhibiting effect of fibrosis in a dynamic environment in vivo. Results show that the expression of integrin β1 and α-smooth muscle actin is inhibited by the cobweb-inspired structure under dynamic culture. The results of hematoxylin and eosin and Masson's trichrome indicate that the cobweb-inspired structure has a good inhibitory effect on fibrosis in a dynamic environment in vivo. In general, the cobweb-inspired scaffold with nano-protrusions has a good ability to inhibit fibrosis under both static and dynamic environments. It is believed that the scaffold has promising applications in the field of inhibiting fibrosis caused by mechanical stimulation.

Collagen Fibril Diameter Distribution of Sheep Anterior Cruciate Ligament

The anterior cruciate ligament (ACL) tissue is a soft tissue connecting the femur and tibia at the knee joint and demonstrates a limited capacity for self-regeneration due to its low vascularity. The currently available clinical procedures are unable to fully restore damaged ACL tissue, and tissue engineering can offer options with a potential of restoring the torn/ruptured ACL by using biomimetic constructs that are similar to native tissue in terms of structure, composition, and functions. However, a model substrate to understand how the ACL cells regenerate the injured tissue is still not available. In this study, it is hypothesized that the nanofiber-based model substrate with bimodal and unimodal fiber diameter distributions will mimic the diameter distribution of collagen fibrils seen in healthy and injured sheep ACL, respectively. The aims were to (i) create an ACL injury in a sheep ACL by applying extensional force to rupture the healthy ACL tissue, (ii) measure the collagen fibril diameter distributions of healthy and injured ACL, (iii) fabricate polycaprolactone (PCL) nanofiber-based model constructs using electrospinning with diameter distributions similar to healthy and injured ACL tissue, and (iv) measure mechanical properties of ACL tissue and PCL electrospun constructs. The results showed that the fiber diameter distributions of PCL electrospun constructs and those of the healthy and injured ACL tissues were similar. The novelty in this investigation is that the collagen fibril diameter distribution of healthy and injured sheep ACL tissues was reported for the first time. The study is significant because it aims to create a model construct to solve an important orthopedic-related clinical problem affecting millions of people globally. The model construct fabricated in this work is expected to have an important impact on ACL regeneration efforts.

Fullerenol inhibits tendinopathy by alleviating inflammation

Tendinopathy is a common disease in orthopaedics, seriously affecting tendon functions. However, the effects of non-surgical treatment on tendinopathy are not satisfactory and surgical treatments possibly impair the function of tendons. Biomaterial fullerenol has been proved to show good anti-inflammatory effects on various inflammatory diseases. For in vitro experiments, primary rat tendon cells (TCs) were treated by interleukin-1 beta (IL-1β) combined with aqueous fullerenol (5, 1, 0.3 μg/mL). Then inflammatory factors, tendon-related markers, migration and signaling pathways were detected. For in vivo experiments, rat tendinopathy model was constructed by local injection of collagenase into Achilles tendons of rats and fullerenol (0.5, 1 mg/mL) was locally injected 7 days after collagenase injection. Inflammatory factors and tendon-related markers were also investigated. Fullerenol with good water-solubility showed excellent biocompatibility with TCs. Fullerenol could increase expression of tendon-related factors (Collagen I and tenascin C) and decrease expression of inflammatory factors (matrix metalloproteinases-3, MMP-3, and MMP-13) and reactive oxygen species (ROS) level. Simultaneously, fullerenol slowed the migration of TCs and inhibited activation of Mitogen-activated protein kinase (MAPK) signaling pathway. Fullerenol also attenuated tendinopathy in vivo, including reduction of fiber disorders, decrease of inflammatory factors and increase of tendon markers. In summary, fullerenol is a promising biomaterial that can be used to treat tendinopathy.