A Low-Cost Ecofriendly Oxidation Process to Manufacture High-Performance Polymeric Biosurfactants Derived from Municipal Biowaste

Biosurfactants account for about 12% of the global value of the surfactant market, which is currently dominated by synthetic surfactants obtained from fossil sources. Yet, the production of biosurfactants from renewable feedstock is bound to increase, driven by the increasing pressure from both society and governments for chemistry-based industries to become more ecofriendly and economically sustainable. A photo-chemical oxidation process is reported here, yielding new biosurfactants from urban biowaste in water that perform as a solvent and terminal oxidant reagent at room temperature without the addition of conventional oxidants and catalysts. Products with 200-500 kDa molecular weight are obtained. They lower the surface tension of water down to 34 mN/m at 0.5-2 g/L concentration. The estimated cost is rather low (0.1-1.5 EUR/kg), which is competitive with the cost of synthetic surfactants but much lower than the cost of the best-performing bacterial surfactants. For the implementation of the photo-chemical oxidation process at the industrial level, the results suggest that the new biosurfactants obtained in the present work may not reach the performance level of the best-performing bacterial surfactants capable of lowering the surface tension of water down to 28 mN/m. Yet, the biosurfactants produced by the photo-chemical process have a greater chance of being marketed on large scales.

Zinc Vacancy Promotes Photo-Reforming Lignin Model to H2 Evolution and Value-Added Chemicals Production

Lignin, rich in β-O-4 bonds and aromatic structure, is a renewable and potential resource for value-added chemicals and promoting H2 evolution. However, direct photo-reforming lignin remains a huge challenge due to its recalcitrant structure. Herein, a collaborative strategy is proposed by dispersing Pt on zinc-vacancy-riched ZnIn2 S4 (Pt/VZn -ZIS) for revealing the effect of lignin structure during photo-reforming process with lignin models. And a series of theoretical calculations and experimental results show that lignin model substances with more nucleophilic group structures will have a stronger tendency to occur the photo-reforming reactions. In addition, benefiting of Pt-S electronic channel is formed by occupying Pt atom onto zinc vacancies in ZnIn2 S4 , which can effectively reduce the energy barrier of H2 evolution and accompany the selective oxidation of lignin model from Cα-OH to Cα = O under simulated sunlight. The natural lignin is used to further demonstrate this selective oxidation mechanism. The presented work demonstrates the photo-reforming lignin model mechanism and the influence of lignin-structure during the process of photo-reforming.

Photocatalytic Transformation of Biomass and Biomass Derived Compounds-Application to Organic Synthesis

Biomass and biomass-derived compounds have become an important alternative feedstock for chemical industry. They may replace fossil feedstocks such as mineral oil and related platform chemicals. These compounds may also be transformed conveniently into new innovative products for the medicinal or the agrochemical domain. The production of cosmetics or surfactants as well as materials for different applications are examples for other domains where new platform chemicals obtained from biomass can be used. Photochemical and especially photocatalytic reactions have recently been recognized as being important tools of organic chemistry as they make compounds or compound families available that cannot be or are difficultly synthesized with conventional methods of organic synthesis. The present review gives a short overview with selected examples on photocatalytic reactions of biopolymers, carbohydrates, fatty acids and some biomass-derived platform chemicals such as furans or levoglucosenone. In this article, the focus is on application to organic synthesis.

One-pot sequential cascade reaction for selective gluconic acid production from cellulose photobiorefining

We demonstrate the feasibility of cellulose photobiocatalytic conversion with >75% cellulose conversion and >75% gluconic acid selectivity from converted glucose. This process is realized via a one-pot sequential cascade reaction by cellulase enzymes and a carbon nitride photocatalyst that can realize selective glucose photoreforming into gluconic acid. Cellulase enzymes breakdown cellulose into glucose, which will subsequently be converted into gluconic acid by essential oxidative species (˙O₂^- and ˙OH) via a selective photocatalysis process with simultaneous H₂O₂ formation. This work demonstrates a good example to realize direct cellulose photobiorefining into value-added chemicals via the photo-bio hybrid system.

Toward the Photocatalytic Valorization of Lignin: Conversion of a Model Lignin Hexamer with Multiple Functionalities

The valorization of biomass via photocatalysis is an area of expanding research with advances in new technologies and materials with a view toward enhanced sustainability being reported. A significant challenge within this field, however, is understanding the impact photocatalysis has on more recalcitrant compounds present in biomass, such as lignin. Moreover, the current state of lignin model compound research is still largely focused on the breakdown of small models containing typically only one linkage. Described herein is the use of TiO₂-mediated photocatalysis for the degradation of a representative hexameric lignin model compound which contains multiple linkages (e.g., 5-5', β-5, and β-O-4). The results revealed that while cleavage of the β-5 and β-O-4 occurred, the 5-5' appeared to remain intact within the identified reaction intermediates. To understand some of the more fundamental questions, a dimeric compound with a biphenyl linkage was synthesized and studied under photocatalytic conditions. The proposal of intermediates and pathways of degradation based on the studies conducted is presented and discussed herein.

Progress in Development of Photocatalytic Processes for Synthesis of Fuels and Organic Compounds under Outdoor Solar Light

With photovoltaics becoming a mature, commercially feasible technology, society is willing to allocate resources for developing and deploying new technologies based on using solar light. Analysis of projects supported by the European Commission in the past decade indicates exponential growth of funding to photocatalytic (PC) and photoelectrocatalytic (PEC) technologies that aim either at technology readiness levels (TRLs) TRL 1-3 or TRL > 3, with more than 75 Mio€ allocated from the year 2019 onward. This review provides a summary of PC and PEC processes for the synthesis of bulk commodities such as solvents and fuels, as well as chemicals for niche applications. An overview of photoreactors for photocatalysis on a larger scale is provided. The review rounds off with the summary of reactions performed at lab scale under natural outdoor solar light to illustrate conceptual opportunities offered by solar-driven chemistry beyond the reduction of CO₂ and water splitting. The authors offer their vision of the impact of this area of research on society and the economy.

One-Pot Ethyl Acetate Production from Ethanol Photooxidation on Rutile TiO2(110): Strong Photon Energy Dependence

Ethyl acetate (EA) production from sequential ethanol (EtOH) photooxidation on a rutile(R)-TiO₂(110) surface has been investigated by the temperature-programmed desorption (TPD) method at 355 and 266 nm. Significant EA product is detected under 266 nm irradiation, which is most likely to be formed via cross-coupling of primary dissociation products, aldehyde (CH₃CHO) and ethoxy groups. On the contrary, EA formation at 355 nm is negligible. In addition, the initial rate of EA formation from EtOH at 266 nm is nearly 2 orders of magnitude faster than that at 355 nm. Quantitative analysis suggests that EA formation from sequential EtOH photooxidation on R-TiO₂(110) is strongly dependent on photon energy or the energy of hot holes. This experimental result raises doubt about the traditional photocatalysis model on TiO₂ where charge carriers relax to their respective band edges prior to charge transfer to adsorbates during the photocatalytic process, leading to no dependence on photon energy in TiO₂ photocatalysis.