Fabrication of CMC-g-PAM Superporous Polymer Monoliths via Eco-Friendly Pickering-MIPEs for Superior Adsorption of Methyl Violet and Methylene Blue

Hemicelluloses hydrogel: Synthesis, characterization, and application in dye removal

Novel materials using biowaste as adsorbents in wastewater treatment have been allocated considerable interest. Herein, we present the synthesis of different hydrogels of crosslinked polyacrylamide in presence of hemicelluloses with/ without bentonite, using a soft reaction condition. The structure of new hydrogels was characterized by spectroscopic, thermal and microscopic experiments. The semi-interpenetrated network with hemicelluloses: 10 %; acrylamide 79 %; bentonite 10 %; N,N,N',N'-tetramethylethylenediamine: 1 % allows reducing 20 % the use of non-renewable acrylamide, without changing its decomposition temperatures and keeping its water absorption capacity. This hydrogel was applied to dye removals, such as rhodamine B, methylene red and methylene blue in aqueous solutions. In the case of methylene blue, highest removal is observed with maximum adsorption of qmax = 140.66 mg/g, compared to material without hemicelluloses that only a qmax = 88.495 mg/g. The adsorption kinetics and equilibrium adsorption isotherms are in accordance with the pseudo-second-order kinetic model and Langmuir isotherm model, respectively. The developed hydrogel from hemicelluloses represents a potential alternative adsorbent for a sustainable system of sewage treatment.

Macroporous Aerogels Using High Internal Phase Pickering Emulsions for Adsorption of Dyes

The treatment of industrial printing and dyeing wastewater is the focus of the chemical environmental protection industry. Noticeably, the physical adsorption has attracted wide attention due to the selective dye adsorption, simple process, and convenient operation. New aerogels featuring low density and high porosity are regarded as ideal physical adsorption materials for sewage treatment. In this work, high internal phase Pickering emulsions were designed and prepared. The polysaccharide complex originating from sodium octenylsuccinate starch and chitosan serves as the stabilizer, water and hexane act as the external and internal phase, respectively. Acrylic acid was introduced into the external phase to initiate UV polymerization. The high internal phase Pickering emulsions as templates were removed through freeze-drying to produce aerogel materials with macroporous structures, the size of the pores: 43.54 ± 12.75 μm. The scanning electron microscopy (SEM) images show that the pore size of aerogel materials was similar to that of emulsion droplets, verifying the template role of emulsion in the polymerization process. In addition, aerogels possess good mechanical properties and can withstand a pressure of megapascal, exhibiting favorable stability when floating in water for a long time (6 months). Methyl violet, malachite green, methylene blue, and acridine orange in aqueous solution were selected as model dyes to explore the removal process and the mechanism. The adsorption was conformed to be the pseudo-second-order kinetic model and the Freundlich adsorption isotherm, namely, the dye adsorption of the aerogels was the multilayer adsorption on the uneven surface, and the mechanism of the adsorption was related to the π-π interaction.

Gum katira-silver nanoparticle-based bionanocomposite for the removal of methyl red dye

The present study aimed to synthesize gum katira-silver nanoparticle-based bionanocomposite. Different characterization techniques were used to analyze the synthesized bionanocomposite, such as Fourier transform infrared (FTIR) spectroscopy, field emission scanning electron microscopy (FESEM), thermo-gravimetric analysis (TGA), and transmission electronic microscopy (TEM). AgNPs were formed and were 6-20 nm in size. Thermo-gravimetric analysis showed that synthesized nanocomposites are more thermally stable than gum katira. All the reaction conditions, such as time, temperature, pH, solvent, amount of nanoparticles, the concentration of the initiator, crosslinker, and monomer were optimized with respect to swelling. The results showed that the highest percentage swelling (Ps) of Gk-cl-poly(AA) was 796%, and 867% of AgNPs were imbibed by Gk-cl-poly(acrylic acid)-AgNPs. Synthesized bionanocomposite was used as an adsorbent material for the adsorption of methyl red (MR) dye. The effects of different reaction conditions were also optimized to attain maximum adsorption of MR dye. The maximum dye adsorption through Gk-cl-poly(AA)-AgNPs bionanocomposite was 95.7%. Diverse kinetic and isotherm models were used to study the adsorption data. The R 2 value was established as 0.987 and k2 was .02671. The greater R 2 value of second-order kinetics over first-order kinetics suggested that MR adsorption by nanocomposite is best explained by pseudo-second-order kinetics, indicating that dye adsorption occurred through chemisorption. The R 2 value was determined to be .9954. The correlation coefficient values of Gk-cl-poly(AA)-AgNPs were best fitted by the Freundlich adsorption isotherm. Overall, synthesized bionanocomposite is a proficient material for removing of MR dye from wastewater.

Development of porous material via chitosan-based Pickering medium internal phase emulsion for efficient adsorption of Rb+, Cs+ and Sr2

The radioactive Rb⁺, Cs⁺ and Sr²⁺ have serious threat for the aquatic life and human health, its removal has been granted increasing concern. Hence the adsorbent with excellent adsorption performance and favourable reusability is strongly demanded. This work prepared a novel porous polymer of chitosan-g-polyacrylamide (CTS-g-PAM) by grafting the acrylamide (AM) onto the chitosan (CTS) with sufficient pore structure via an eco-friendly surfactant-free (corn oil)-in-water Pickering medium internal phase emulsion (O/W Pickering MIPE), solely stabilized by CTS. Interestingly, its pore structure could be tuned by varying the emulsion character via changing the molecular weight and concentration of CTS, as well as the pH values. Due to the abundant -COO^- and -NH₂ functional groups in the porous material of CTS-g-PAM, the high adsorption capacities of 195.43, 237.44 and 185.63 mg/g for Rb⁺, Cs⁺ and Sr²⁺ could be reached within 40, 30 and 20 min, respectively. Moreover, the CTS-g-PAM had excellent regeneration ability and reusability. Herein, we provided a feasible and low-cost pathway for preparation of the porous adsorbent with tunable porous structure for adsorption and separation application.

Fast and Highly Efficient Adsorption Removal of Toxic Pb(II) by a Reusable Porous Semi-IPN Hydrogel Based on Alginate and Poly(Vinyl Alcohol)

A porous semi-interpenetrating network (semi-IPN) hydrogel adsorbent with excellent adsorption properties and removal efficiency towards Pb(II) was prepared by a facile grafting polymerization reaction in aqueous medium using natural biopolymer sodium alginate (SA) as the main chains, sodium acrylate (NaA) as the monomers, and poly(vinyl alcohol) (PVA) as the semi-IPN component. FTIR, TGA and SEM analyses confirm that NaA monomers were grafted onto the macromolecular chains of SA, and PVA chains were interpenetrated and entangled with the crosslinked network. The incorporation of PVA facilitates to form pores on the surface of hydrogel adsorbent. The semi-IPN hydrogel containing 2 wt% of PVA exhibits high adsorption capacity and fast adsorption rate for Pb(II). The best adsorption capacity reaches 784.97 mg/g, and the optimal removal rate reaches 98.39% (adsorbent dosage, 2 g/L). In addition, the incorporation of PVA improved the gel strength of hydrogel, and the storage modulus of hydrogel increased by 19.4% after incorporating 2 wt% of PVA. The increase of gel strength facilitates to improve the reusability of hydrogel. After 5 times of regeneration, the adsorption capacity of SA-g-PNaA decreased by 23.2%, while the adsorption capacity of semi-IPN hydrogel only decreased by 10.8%. The adsorption kinetics of the hydrogel in the initial stage (the moment when the adsorbent contacts solution) and the second stage are fitted by segmentation. It is intriguing that the adsorption kinetics fits well with both pseudo-second-order kinetic model and pseudo-first-order model before 60 s, while only fits well with pseudo-second-order adsorption model in the whole adsorption process. The chemical complexing adsorption mainly contribute to the efficient capturing of Pb(II).

Fabrication porous adsorbents templated from modified sepiolite-stabilized aqueous foams for high-efficient removal of cationic dyes

High internal phase emulsions (HIPEs) as template for fabrication of porous materials has attracted much attention, due to the high porosity and tunable porous structure. But the enormous consumption of organic solvents is still a nightmare for the practical application. In comparison, the aqueous foam without need any organic solvent and hence has greater advantages in the porous materials preparation. In this study, a novel Pickering foam which was stabilized by modified sepiolite (Sep) was prepared and applied as the template for preparation of the porous material via thermal-initiated polymerization. The Pickering foam had excellent ability and stability in the pH of 4-11 and the obtained porous adsorbent possess sufficient and tuned pore structure. The porous materials as adsorbent has favorable performance for adsorption and selective removal of cationic dyes, and the understanding adsorption capacities for Methylene blue (MB) and Methyl green (MG) can be achieved with 1421.18 mg/g and 638.81 mg/g within 60 and 45 min at 25 °C, respectively. This porous material can be as the potential adsorbent for adsorption or separation of organic pollutants.

Preparation of Carboxymethyl Cellulose-g- Poly(acrylamide)/Attapulgite Porous Monolith With an Eco-Friendly Pickering-MIPE Template for Ce(III) and Gd(III) Adsorption

Due to their high specific surface and metal-binding functional groups in their crosslinked polymeric networks, monolithic materials incorporating a porous structure have been considered one of the most efficient kinds of adsorbents for rare earth element recovery. Herein, a facile and novel monolithic multi-porous carboxymethyl cellulose-g-poly(acrylamide)/attapulgite was synthesized by free radical polymerization via green vegetable oil-in-water Pickering medium internal phase emulsion (O/W Pickering-MIPEs), which was synergically stabilized by attapulgite and tween-20. The homogenizer rotation speed and time were investigated to form stable Pickering-MIPEs. The effects of different types of oil phase on the formation of Pickering-MIPEs were investigated with stability tests and rheological characterization. The structure and composition of the porous material when prepared with eight kinds of vegetable oil were characterized by FTIR and SEM. The results indicate that the obtained materials, which have abundant interconnected porosity, are comparable to those fabricated with Pickering-HIPE templates. The adsorption experiment demonstrated that the prepared materials have a fast capture rate and high adsorption capacities for Ce(III) and Gd(III), respectively. The saturation adsorption capacities for Ce(III) and Gd(III) are 205.48 and 216.73 mg/g, respectively, which can be reached within 30 min. Moreover, the monolithic materials exhibit excellent regeneration ability and reusability. This work provides a feasible and eco-friendly pathway for the construction of a multi-porous adsorbent for adsorption and separation applications.

Highly Efficient Adsorption of Phenylethanoid Glycosides on Mesoporous Carbon

PhGs are the major active compounds of Cistanche tubulosa, and it is extremely desirable for obtaining high purification of PhGs by adsorption from their extracts. To explore highly efficient adsorption of PhGs, a novel adsorption material for the efficient separation and purification of phenylethanoid glycosides (PhGs) from Cistanche tubulosa was explored. The three mesoporous carbons of ordered mesoporous carbon (CMK-3), disordered mesoporous carbon (DMC), and three-dimensional cubic mesoporous carbon (CMK-8) were compared for adsorption of PhGs. Meanwhile, adsorption isotherms, adsorption kinetics, and the optimization of adsorption conditions were investigated. The results indicated that CMK-3 showed the highest adsorption capacity of 358.09 ± 4.13 mg/g due to its high specific surface area, large pore volume and oxygen-containing functional groups. The experimental data can be accurately described using the Langmuir model and pseudo-second-order model. The intra-particle diffusion model suggested that the rate-limiting steps of adsorption were intra-particle diffusion.

Preparation of Carboxymethyl Cellulose-Based Macroporous Adsorbent by Eco-Friendly Pickering-MIPEs Template for Fast Removal of Pb2+ and Cd2

Recently, Pickering high internal phase emulsions (Pickering HIPEs) have been widely used to fabricate macroporous materials. However, the high usage of poisonous organic solvent in HIPEs not only greatly increases the cost but also is harmful to human health and environment, which leads to limited large-scale applications. In this study, we prepared a novel monolithic macroporous material of carboxymethyl cellulose-g-poly(acrylamide)/montmorillonite (CMC-g-PAM/MMT) by the free radical polymerization via oil-in-water Pickering medium internal phase emulsions (Pickering MIPEs), which used the non-toxic and eco-friendly flaxseed oil as continuous phase, MMT, and Tween-20 (T-20) as stabilizer. The pore structure of the resulting macroporous materials could be tuned easily by adjusting the content of MMT, co-surfactant T-20, and the oil phase volume fraction. The maximal adsorption capacities of the prepared macroporous material for Pb²⁺ and Cd²⁺ were 456.05 and 278.11 mg/g, respectively, and the adsorption equilibrium can be reached within 30 min. Otherwise, the macroporous monolith exhibited excellent reusability through five adsorption–desorption cycles. Thus, the eco-friendly Pickering-MIPEs is a potential alternative method to be used to fabricate multi-porous adsorption materials for environmental applications.

Eco-friendly porous carboxymethyl cellulose/dextran sulfate composite beads as reusable and efficient adsorbents of cationic dye methylene blue

Eco-friendly hydrogel composite beads based on crosslinked-carboxymethyl cellulose (CMC) and dextran sulfate (DS) embedded within network were prepared using ionotropic gelation in presence of sodium n-dodecyl sulfate (SDS) as pore-forming template. The milligels composites C/Dx were characterized by FTIR, SEM/EDX and TGA analyses. The composites exhibited porous structure and enhance in swelling properties with enriching DS as well as pH-sensitivity. The effect of DS on adsorption of composites for cationic dye methylene blue (MB) was investigated by changing influencing factors: pH, adsorbent dosage, time contact, dye concentration, and temperature. The results revealed that adsorption performances were remarkably improved by increasing DS content into beads. Kinetics and isotherm adsorption studies revealed pseudo second-order and Langmuir isotherm as befitting models. The maximum Langmuir equilibrium adsorption capacity (q_m) was found to increase from 82 mg g^-1 for C/D0 to 526 mg g^-1 for C/D1. Thermodynamic study revealed spontaneous and endothermic process nature. Furthermore, milligels displayed good reusability after five adsorption/desorption cycles and with an augment in their removal ability compared to starting ones, reaching 714 mg g^-1 for R-C/D1. In view of easy preparation and recovery, effectiveness adsorption and good regeneration, the composites could be applied as low-cost adsorbents in wastewater treatment.