Water-Tolerant Trifloaluminate Ionic Liquids: New and Unique Lewis Acidic Catalysts for the Synthesis of Chromane

Supported Ionic Liquid Phase Catalysts Dedicated for Continuous Flow Synthesis

Heterogeneous catalysis, although known for over a century, is constantly improved and plays a key role in solving the present problems in chemical technology. Thanks to the development of modern materials engineering, solid supports for catalytic phases having a highly developed surface are available. Recently, continuous-flow synthesis started to be a key technology in the synthesis of high added value chemicals. These processes are more efficient, sustainable, safer and cheaper to operate. The most promising is the use of heterogeneous catalyst with column-type fixed-bed reactors. The advantages of the use of heterogeneous catalyst in continuous flow reactors are the physical separation of product and catalyst, as well as the reduction in inactivation and loss of the catalyst. However, the state-of-the-art use of heterogeneous catalysts in flow systems compared to homogenous ones remains still open. The lifetime of heterogeneous catalysts remains a significant hurdle to realise sustainable flow synthesis. The goal of this review article was to present a state of knowledge concerning the application of Supported Ionic Liquid Phase (SILP) catalysts dedicated for continuous flow synthesis.

Gallium(III)- and Indium(III)-Containing Ionic Liquids as Highly Active Catalysts in Organic Synthesis

The chemical industry still requires development of environmentally friendly processes. Acid-catalysed chemical processes may cause environmental problems. Urgent need to replace conventional acids has forced the search for sustainable alternatives. Metal-containing ionic liquids have drawn considerable attention from scientists for many years. These compounds may exhibit very high Lewis acidity, which is usually dependent on the composition of the ionic liquid with the particular content of metal salt. Therefore, metal-containing ionic liquids have found a lot of applications and are successfully employed as catalysts, co-catalysts or reaction media in various fields of chemistry, especially in organic chemistry. Gallium(III)- and indium(III)-containing ionic liquids help to transfer the remarkable activity of metal salts into even more active and easier-to-handle forms of ionic liquids. This review highlights the wide range of possible applications and the high potential of metal-containing ionic liquids with special focus on Ga(III) and In(III), which may help to outline the framework for further development of the presented research topic and synthesis of new representatives of this group of compounds.

Silica-Based Supported Ionic Liquid-like Phases as Heterogeneous Catalysts

Supported ionic liquid phases offer several advantages related with catalysis. Immobilization of ionic liquid on the solid support provides catalytic activity or efficient matrix for active phases, as enzymes or metal compounds. Ionic liquid can be physically adsorbed on the carrier (supported ionic liquid phase) or chemically grafted to the material surface (supported ionic liquid-like phase). The use of supported ionic liquid phases improves mass transport, reduces ionic amount in the process and, most importantly, enables effortless catalyst separation and recycling. Moreover, chemical modification of the surface material with ionic liquid prevents its leaching, enhancing length of catalyst life. Silica-based materials have become an effective and powerful matrix for supported ionic liquid-like phase due to its cost-efficiency, presence of hydroxyl groups on the surface enabling its functionalization, and specific material properties, such as the size and shapes of the pores. For these reasons, supported ionic liquid-like phase silica-based materials are successfully used in the organic catalysis.

Highly Active Trifloaluminate Ionic Liquids as Recyclable Catalysts for Green Oxidation of 2,3,6-Trimethylphenol to Trimethyl-1,4-Benzoquinone

An effective method for the synthesis of 2,3,6-trimethyl-1,4-benzoquinone via the oxidation of 2,3,6-trimethylphenol as the key step in the in the preparation of vitamin E was presented. An aqueous solution of H2O2 was used as the oxidant and Lewis acidic trifloaluminate ionic liquids [emim][OTf]-Al(OTf)3, χAl(OTf)3 = 0.25 or 0.15 as catalysts. Trifloaluminate ionic liquids were synthesised by the simple reaction between 1-ethyl-3-methylimidazolium trifluoromethanesulfonate (triflate) [emim][OTf] and aluminium triflate used in sub-stoichiometric quantities. The influence of the reaction parameters on the reaction course, such as the amount and concentration of the oxidant, the amount of catalyst, the amount and the type of organic solvent, temperature, and the reaction time was investigated. Finally, 2,3,6-trimethyl-1,4-benzoquinone was obtained in high selectivity (99%) and high 2,3,6-trimethylphenol conversion (84%) at 70 °C after 2 h of oxidation using a 4-fold excess of 60% aqueous H2O2 and acetic acid as the solvent. The catalytic performance of trifloaluminate ionic liquids supported on multiwalled carbon nanotubes (loading of active phase: 9.1 wt.%) was also demonstrated. The heterogeneous ionic liquids not only retained their activity compared to the homogenous counterparts, but also proved to be a highly recyclable catalysts.

Physicochemical Properties of Various 2-Hydroxyethylammonium Sulfonate -Based Protic Ionic Liquids and Their Potential Application in Hydrodeoxygenation

In order to obtain the regularities of physicochemical properties of hydroxy protic ionic liquids (PILs) and broaden their potential application, a series of 2-hydroxyethylammonium sulfonate-based PILs were synthesized through proton transfer reaction and characterized by NMR and FT-IR and elemental analysis. Their phase transfer behavior (T _m) and initial decomposition point (T _d) were characterized by differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA), respectively. Meanwhile, the regularities of density (ρ), viscosity (η) and electrical conductivity (σ) of synthesized PILs at different temperatures were measured. The results indicated that their physicochemical properties were tightly related with their structures and the interactions between cations and anions. In addition, the dissociation constants (pKa) of synthesized PILs were obtained by acid-base titration, which revealed that all synthesized PILs had pKa exceeding 7 and their cations were the crux of determining the pKa value. Moreover, several synthesized PILs with a low melting temperature also showed potential application in the deoxidation reaction of cyclohexanol, as they had conversion rates approximating 100% and the selectivity of cyclohexane or cyclohexene was about 80%.