CWPO Degradation of Methyl Orange at Circumneutral pH: Multi-Response Statistical Optimization, Main Intermediates and by-Products

Recent advances of piezo-catalysis and photocatalysis for efficient environmental remediation

The efficient degradation of organic pollutants in diverse environmental matrices can be achieved through the synergistic application of piezo-catalysis and photocatalysis. The focus of this study is on understanding the fundamental principles and mechanisms that govern the collaborative action of piezoelectric and photocatalytic materials. Piezoelectric nanomaterials, under mechanical stress, generate piezo-potential, which, when coupled with photocatalysts, enhances the generation and separation of charge carriers. The resulting cascade of redox reactions promotes the degradation of a wide spectrum of organic pollutants. The comprehensive investigation involves a variety of experimental techniques, including advanced spectroscopy and microscopy, to elucidate the intricate interplay between mechanical and photoinduced processes. The influence of key parameters, such as material composition, morphology, and external stimuli on the catalytic performance, is systematically explored. This study contributes to the increasing knowledge of environmental remediation and lays the foundation for the development of advanced technologies using piezo and photocatalysis for sustainable pollutant removal.

Optimization of preparation conditions for Salsola laricifolia protoplasts using response surface methodology and artificial neural network modeling

BACKGROUND

Salsola laricifolia is a typical C3-C4 typical desert plant, belonging to the family Amaranthaceae. An efficient single-cell system is crucial to study the gene function of this plant. In this study, we optimized the experimental conditions by using Box-Behnken experimental design and Response Surface Methodology (RSM)-Artificial Neural Network (ANN) model based on the previous studies.

RESULTS

Among the 17 experiment groups designed by Box-Behnken experimental design, the maximum yield (1.566 × 106/100 mg) and the maximum number of viable cells (1.367 × 106/100 mg) were obtained in group 12, and the maximum viability (90.81%) was obtained in group 5. Based on these results, both the RSM and ANN models were employed for evaluating the impact of experimental factors. By RSM model, cellulase R-10 content was the most influential factor on protoplast yield, followed by macerozyme R-10 content and mannitol concentration. For protoplast viability, the macerozyme R-10 content had the highest influence, followed by cellulase R-10 content and mannitol concentration. The RSM model performed better than the ANN model in predicting yield and viability. However, the ANN model showed significant improvement in predicting the number of viable cells. After comprehensive evaluation of the protoplast yield, the viability and number of viable cells, the optimal results was predicted by ANN yield model and tested. The amount of protoplast yield was 1.550 × 106/100 mg, with viability of 90.65% and the number of viable cells of 1.405 × 106/100 mg. The corresponding conditions were 1.98% cellulase R-10, 1.00% macerozyme R-10, and 0.50 mol L-1 mannitol. Using the obtained protoplasts, the reference genes (18SrRNA, β-actin and EF1-α) were screened for expression, and transformed with PEG-mediated pBI121-SaNADP-ME2-GFP plasmid vector. There was no significant difference in the expression of β-actin and EF1-α before and after treatment, suggesting that they can be used as internal reference genes in protoplast experiments. And SaNADP-ME2 localized in chloroplasts.

CONCLUSION

The current study validated and evaluated the effectiveness and results of RSM and ANN in optimizing the conditions for protoplast preparation using S. laricifolia as materials. These two methods can be used independently of experimental materials, making them suitable for isolating protoplasts from other plant materials. The selection of the number of viable cells as an evaluation index for protoplast experiments is based on its ability to consider both protoplast yield and viability. The findings of this study provide an efficient single-cell system for future genetic experiments in S. laricifolia and can serve as a reference method for preparing protoplasts from other materials.

The application of ferrous and graphitic N modified graphene-based composite cathode material in the bio-electro-Fenton system driven by sediment microbial fuel cells to degrade methyl orange

In this work, the ferrous (Fe2+) and graphitic N modified graphene-based composite cathode materials (N-rGO/Fe3O4) were developed through an in-situ reduction method, aiming to facilitate the two-electron pathway in the oxidation-reduction process. This approach generated a specific concentration of H2O2, enabling the construction of a sediment bio-electro-Fenton system using Fe2+ released from the cathode materials. Notably, this system operates without the need for proton exchange membranes. During the cathode material preparation, the utilization of Fe2+ as a reduction agent for graphene oxide (GO), triggered ammonia water to form graphitic N in graphene sheets. This addition enhanced the two-electron pathway, resulting in increased H2O2 production. Specifically, when the Fe2+ concentration was maintained at 0.1 mol/L, precise preparation of N-rGO/Fe3O4 occurred, leading to a maximum output voltage of 0.528 V and a maximum power density of 178.17 mW/m2. The degradation of methyl orange (MO) reached 68.91% within a 25-h period, a phenomenon contributed to the presence of graphitic N in the graphene sheets. H2O2, a byproduct of the two-electron pathway in cathode oxidation reduction reaction, played a crucial role in constructing the bio-electro-Fenton system. This system, in conjunction with Fe2+ released from N-rGO/Fe3O4, facilitated the complete degradation process of MO.

g-C3N4 Based Photocatalyst for the Efficient Photodegradation of Toxic Methyl Orange Dye: Recent Modifications and Future Perspectives

Industrial effluents containing dyes are the dominant pollutants, making the drinking water unfit. Among the dyes, methylene orange (MO) dye is mutagenic, carcinogenic and toxic to aquatic organisms. Therefore, its removal from water bodies through effective and economical approach is gaining increased attention in the last decades. Photocatalytic degradation has the ability to convert economically complex dye molecules into non-toxic and smaller species via redox reactions, by using photocatalysts. g-C₃N₄ is a metal-free n-type semiconductor, typical nonmetallic and non-toxici polymeric photocatalyst. It widely used in photocatalytic materials, due to its easy and simple synthesis, fascinating electronic band structure, high stability and abundant availability. As a photocatalyst, its major drawbacks are its limited efficiency in separating photo-excited electron-hole pairs, high separated charge recombination, low specific surface area, and low absorption coefficient. In this review, we report the recent modification strategies adopted for g-C₃N₄ for the efficient photodegradation of MO dye. The different modification approaches, such as nanocomposites and heterojunctions, as well as doping and defect introductions, are briefly discussed. The mechanism of the photodegradation of MO dye by g-C₃N₄ and future perspectives are discussed. This review paper will predict strategies for the fabrication of an efficient g-C₃N₄-based photocatalyst for the photodegradation of MO dye.

Cytogenotoxicity assessment in Allium cepa roots exposed to methyl orange treated with Oedogonium subplagiostomum AP1

The present study is an attempt to assess the cytogenotoxic effect of untreated and methyl orange treated with Oedogonium subplagiostomum AP1 on Allium cepa roots. On the fifth day, root growth, root length, mitotic index, mitotic inhibition/depression, and chromosomal abnormalities were measured in root cells of Allium cepa subjected to untreated and treated methyl orange dye solutions. Roots exposed to treated dye solution exhibited maximum root growth, root length and mitotic index, whereas roots exposed to untreated dye solution had the most mitotic inhibition and chromosomal abnormalities. Allium cepa exposed to untreated dye solution revealed chromosomal aberrations such as disoriented and abnormal chromosome grouping, vagrant and laggard chromosomes, chromosomal loss, sticky chain and disturbed metaphase, pulverised and disturbed anaphase, chromosomal displacement in anaphase, abnormal telophase, and chromosomal bridge at telophase, spindle disturbances and binucleate cells. The comet test was used to quantify DNA damage in the root cells of A. cepa subjected to untreated and treated methyl orange solutions in terms of tail DNA (percent) and tail length. The results concluded that A. cepa exposed to methyl orange induced DNA damage whereas meager damage was noted in the treated dye solution. As a result, the research can be used as a biomarker to detect the genotoxic effects of textile dyes on biota.

Role of persistent free radicals and lewis acid sites in visible-light-driven wet peroxide activation by solid acid biochar catalysts - A mechanistic study

We report the synthesis of H₂SO₄-modified biochars (SBCs) as solid-acid catalysts to activate H₂O₂ at circumneutral pH under visible light radiation. Spent coffee grinds were pyrolyzed with TiO₂ at 300, 500 and 600 °C followed by steeping in 5 M H₂SO₄ and were used for the Fenton-like degradation of methyl orange (MO). The catalytic activity of SBC depended on the pyrolysis temperature and correlated well with the surface acidity and persistent free radical (PFR) concentration. Results showed that a complete MO removal and a TOC reduction of 70.2% can be achieved with SBC500 under photo-Fenton conditions. However, poisoning of the Lewis acid sites on SBC by PO₄^3- led to a dramatic decrease in the removal of MO with inhibition effects more pronounced than with radical scavengers, suggesting the key role played by acid-sites on the activation of H₂O₂. Finally, electron paramagnetic resonance (EPR) studies identified •OH as the key transient in the degradation followed by •O₂^- and ¹O₂. These findings suggest that H₂O₂ was likely adsorbed on the surface oxygenated functional groups before being decomposed by accepting electrons from the PFRs on the SBC surface.

Application of Functional Modification of Iron-Based Materials in Advanced Oxidation Processes (AOPs)

Advanced oxidation processes (AOPs) have become a favored approach in wastewater treatment due to the high efficiency and diverse catalyzed ways. Iron-based materials were the commonly used catalyst due to their environmental friendliness and sustainability in the environment. We collected the published papers relative to the application of the modified iron-based materials in AOPs between 1999 and 2020 to comprehensively understand the related mechanism of modified materials to improve the catalytic performance of iron-based materials in AOPs. Related data of iron-based materials, modification types, target pollutants, final removal efficiencies, and rate constants were extracted to reveal the critical process of improving the catalytic efficiency of iron-based materials in AOPs. Our results indicated that the modified materials through various mechanisms to enhance the catalytic performance of iron-based materials. The principal aim of iron-based materials modification in AOPs is to increase the content of available Fe2+ and enhance the stability of Fe2+ in the system. The available Fe2+ is elevated by the following mechanisms: (1) modified materials accelerate the electron transfer to promote the Fe3+/Fe2+ reaction cycle in the system; (2) modified materials form chelates with iron ions and bond with iron ions to avoid Fe3+ precipitation. We further analyzed the effect of different modifying materials in improving these two mechanisms. Combining the advantages of different modified materials to develop iron-based materials with composite modification methods can enhance the catalytic performance of iron-based materials in AOPs for further application in wastewater treatment.

Green Synthesis of Zinc Oxide Nanoparticles Using Salvia officinalis Leaf Extract and Their Photocatalytic and Antifungal Activities

The facile bio-fabrication of zinc oxide (ZnO) nanoparticles (NPs) is described in this study using an aqueous leaf extract of Salvia officinalis L. as an efficient stabilizing/capping agent. Biosynthesis of nanomaterials using phytochemicals present in the plants has received great attention and is gaining significant importance as a possible alternative to the conventional chemical methods. The properties of the bio-fabricated ZnONPs were examined by different techniques, such as UV-visible spectroscopy, X-ray diffraction spectroscopy (XRD), energy-dispersive X-ray spectroscopy (EDX), Fourier transform infrared spectroscopy (FTIR), transmission electron microscopy (TEM), scanning electron microscopy (SEM), and thermogravimetric/differential scanning calorimetry analysis (TGA/DTG). The photocatalytic activity of ZnONPs was investigated against methyl orange (MO) under UV light irradiation. Under optimum experimental conditions, ZnONPs exhibited 92.47% degradation of MO. Furthermore, the antifungal activity of bio-fabricated ZnONPs was determined against different clinical Candida albicans isolates following standard protocols of broth microdilution and disc diffusion assay. The susceptibility assay revealed that ZnONPs inhibit the growth of all the tested fungal isolates at varying levels with MIC values ranging from 7.81 to 1.95 µg/mL. Insight mechanisms of antifungal action appeared to be originated via inhibition of ergosterol biosynthesis and the disruption of membrane integrity. Thus, it was postulated that bio-fabricated ZnONPs have sustainable applications in developing novel antifungal agents with multiple drug targets. In addition, ZnONPs show efficient photocatalytic efficiency without any significant catalytic loss after the catalyst was recycled and reused multiple times.

Catalytic Oxidation of Ponceau 4R in Aqueous Solution using Iron-impregnated Al-pillared Bentonite: Optimization of the Process

The application of the Fenton-like process for the oxidation of an aqueous solution of Ponceau 4R dye, using an aluminum pillared clay impregnated with iron (Fe(wt%)/Al-PILC) as catalyst, was investigated. The Response Surface Methodology (RSM), based on a Central Composite Design (CCD) was used to evaluate and optimize the oxidation process of a Ponceau 4R solution. Three independent variables were studied in the experimental design: the amount of H2O2 expressed in multiples of times of stoichiometry dose, iron concentration incorporated by impregnation onto aluminum pillared clay (Fe(wt%)), and amount of catalyst (Fe(wt%)/Al-PILC). The response variables were decolorization and total organic carbon (TOC) removal. The significance of independent variables and their interactions were tested by means of analysis of variance (ANOVA), with a 95% confidence level. With low stoichiometric dose of H2O2 (0.96 and 1.54 times), medium amount of catalyst (374.4 and 391.3 mg) and high Fe concentration impregnated in pillared clay (9.3 and 7.7 wt%), the total decolorization and high TOC removal were achieved. Under multi-objective optimization conditions (3.0 times the stoichiometric dose of H2O2, 420 mg Fe(wt%)/Al-PILC and 5.5 wt% Fe impregnated in Al-PILC), it was possible to achieve 86.18% decolorization and 66.81% TOC removal after 5 h of reaction at 25 °C, with the additional advantage of showing an iron leaching of less than 0.10 mg/L. The established models' soundness is confirmed by a good fit between predictive models and experimental results. Copyright © 2021 by Authors, Published by BCREC Group. This is an open access article under the CC BY-SA License (https://creativecommons.org/licenses/by-sa/4.0). 

Copper nickel co-impregnation of Moroccan yellow clay as promising catalysts for the catalytic wet peroxide oxidation of caffeine

Copper and nickel were incorporated into the prepared yellow clay (YC) using one of the most widely used methods, for the preparation of heterogeneous catalysts, which is the wet impregnation method (IPM) and its application as a heterogeneous catalyst for Caffeine (CAF). Several catalysts Cooper Nickel's Catalysts (Cu–Ni) were applied to the yellow clay with different weight ratio of Cu and Ni, in order to explore the role of both metals during the catalytic oxidation process CWPO. Furthermore, the CuNi-YC catalysts, were characterized by X-ray diffraction (XRD), X-ray fluorescence (XRF), Langmuir's surface area, Brunauer Emmett Teller (BET), scanning electron microscope (SEM) and inductively Coupled Plasma-Atomic Emission Spectrometry (ICP-AES), so as to get a better understanding concerning the catalytic activity's behavior of CuNi-YC catalysts. The optimization of the catalytic activity's effects on the different weight ratios of Cu and Ni, temperature and H₂O₂ were also examined, using Box-Behnken Response Surface Methodology RSM to enhance the CAF conversion. The analysis of variances (ANOVA) demonstrates that Box-Behnken model was valid and the CAF conversion reached 86.16%, when H₂O₂ dosage was equal to 0.15 mol.L⁻¹, copper impregnated (10%) and temperature value attained 60 °C. In addition, the regeneration of catalyst's cycles under the optimum conditions, indicated the higher stability up to four cycles without a considerable reduction in its conversion performance.

Decolorization, degradation and detoxification of carcinogenic sulfonated azo dye methyl orange by newly developed biofilm consortia

Metabolites of azo dyes are often carcinogenic, teratogenic, mutagenic and recalcitrant in nature. In this study, four biofilm consortia such as C1 (Vitreoscilla sp. ENSG301, Acinetobacter lwoffii ENSG302, Klebsiella pneumoniae ENSG303 and Pseudomonas fluorescens ENSG304), C2 (Escherichia coli ENSD101, Enterobacter asburiae ENSD102 and E. ludwigii ENSH201), C3 (E. asburiae ENSD102, Vitreoscilla sp. ENSG301 and Bacillus thuringiensis ENSW401), and C4 (E. coli ENSD101, E. ludwigii ENSH201 and B. thuringiensis ENSW401) were applied to degrade and detoxify methyl orange (MO), a carcinogenic, sulfonated mono azo dye, used in textile dyeing industry worldwide. The consortia of C1, C2, C3 and C4 showed 97.30, 98.75, 99.51 and 99.29% decolorization, respectively in yeast extract peptone (YEP) broth containing 200 mg L^-1 MO within 60 h of incubation in static condition. The optimum pH and temperature for decolorization was 7.0 and 28 °C, respectively. Some divalent metal ions including Mg²⁺, Ca²⁺, Zn²⁺ and Mn²⁺ could stimulate MO decolorization. UV-Vis spectral analysis showed that the absorption peak at 465 nm originated from the azo (N[bond, double bond]N) bond was completely disappeared within 60 h of incubation. Fourier transform infrared spectroscopy (FTIR) results also revealed that several major peaks including azo bond peak at 1602.6 cm^-1 are completely or partly vanished, deformed or shifted. Activities of azoreductase, NADH-DCIP reductase and laccase were significantly increased in the bacterial cells within 60 h of incubation in comparison to that of control (0 h). The chemical oxygen demand was incredibly reduced by 85.37 to 91.44% by these consortia. Accordingly, plant (wheat seed germination) and microbial (growth of the plant probiotic bacteria such as Pseudomonas cedrina ESR12 and Bacillus cereus ESD3 on biodegraded products) toxicity studies showed that biodegraded products of MO are non-toxic. Thus, all these consortia can be utilized in bioremediation of MO from wastewater for safe disposal into environment. To our knowledge, this is the first report on degradation and detoxification of MO from wastewater by bacterial biofilm consortia.