Preparation of Covalent-Ionically Cross-Linked UiO-66-NH2/Sulfonated Aromatic Composite Proton Exchange Membranes With Excellent Performance

Effects of heated-treating temperature on the stability and electrochemical performance of alginate-based multi-crosslinked biomembranes

In this study, the organosilane nanoparticles as additive and crosslinker were prepared and incorporated into sodium alginate to fabricate a series of alginate-based multi-crosslinked biomembranes at different thermal treatment temperature without the usage of another crosslinking agent. The effects of treatment temperature on the stability of biomembranes including dimensional, oxidative, hydrolytic and mechanical stability were investigated in detail. As a whole, the stability of biomembranes exhibited increasing tendency with the increment of treatment temperature due to the formation of more compact internal network structure. The electrochemical performance of biomembranes in respect to their potential as proton exchange membranes for direct methanol fuel cell application were also investigated based on the treatment temperature. The results revealed that the biomembranes possessed excellent methanol resistance and the methanol diffusion coefficient decreased with the increment of treatment temperature. The biomembrane with 120 °C heat-treatment showed the optimal selectivity (14.30 × 105 Ss cm-3), which was about 1.77 and 68.10 times of that and of M-80 (8.09 × 105 Ss cm-3) and Nafion@117 (0.21 × 105 Ss cm-3), respectively. Fuel cell performance measurements showed that M-120 possessed higher maximum power density and cell stability compared with M-80 and Nafion@117, indicating its best adaptability for use in direct methanol fuel cell.

High Proton Conductivity of the UiO-66-NH2-SPES Composite Membrane Prepared by Covalent Cross-Linking

A sulfonated poly(ethersulfone) (SPES)-metal-organic framework (MOF) film with excellent proton conductivity was synthesized by anchoring UiO-66-NH₂ to the main chain of the aromatic polymer through the Hinsberg reaction. The chemical bond was formed between the amino group in MOFs and the -SO₂Cl group in chlorosulfonated poly(ethersulfones) to conduct protons in the proton channel of the membrane, making the membrane have excellent proton conductivity. UiO-66-NH₂ is successfully prepared as a result of the consistency of the experimental and simulated powder X-ray diffraction (PXRD) patterns of MOFs. The existence of absorption peaks of characteristic functional groups in Fourier transform infrared (FTIR) spectra proved the successful preparation of SPES, PES-SO₂Cl, and a composite film. The results of the AC impedance test indicate that the composite film with a 3% mass fraction has the best proton conductivity of 0.215 S·cm^-1, which is 6.2 times higher than that of the blended film without a chemical bond at 98% RH and 353 K. To our knowledge, there are rarely any reports on the preparation of a composite membrane by directly linking MOFs and the membrane matrix with chemical bonds. This work provides a good way to synthesize the highly conductive proton exchange film.

Two-dimensional metal-organic framework-graphene oxide hybrid nanocomposite proton exchange membranes with enhanced proton conduction

A novel two-dimensional (2D) zeolitic imidazolate framework-graphene oxide hybrid nanocomposite (ZIF-L@GO) is designed as an inorganic filler in sulfonated poly(ether ether ketone) (SPEEK). ZIF-L with unique leaf-like morphology is grown in-situ on the GO sheet in aqueous media at room temperature. The terminal imidazole linker in ZIF-L@GO and the -SO₃H in SPEEK can form acid-base pairs in the membrane interface to produce low energy proton conduction highway. Benefiting from the unique structural advantage, the hybrid SP-ZIF-L@GO membranes displayed promoted physicochemical and electrochemical performances over the pure SPEEK. The SP-ZIF-L@GO-5 achieved a proton conductivity of 0.265 and 0.0364 S cm^-1 at 70 °C-100% RH and 90 °C-40% RH, 1.76- and 6.24-fold higher than pure SPEEK, respectively. Meanwhile, a single cell based on SP-ZIF-L@GO-5 had an output power up to 652.82 mW cm^-2 at 60 °C, 1.45 times higher than the pure SPEEK. In addition, the durability test was performed by holding open circuit voltage (OCV) for 24 h. The SP-ZIF-L@GO-5 provided better long-term stability than the pure SPEEK. These superior performance suggests a promising application in PEMFC.

Proton conductive Zr-based MOFs

The preparation strategies, structures, proton conductivity, conducting mechanism, application prospects and future research trends of zirconium-based MOFs are reviewed and highlighted.

UiO-66 derivatives and their composite membranes for effective proton conduction

As newly emerging proton-conducting materials, metal-organic frameworks (MOFs) have been attracting wide attention in the field of proton exchange membrane fuel cells. However, for most of the MOF materials, long-term stability is a huge obstacle for practical applications. So, the structural stability of MOFs is the critical prerequisite for the design and development of modified materials with excellent proton conductivity. In this review, stable UiO-66 derivatives were chosen as the research object, and modification methods including post-synthesis modification and hybridization were mainly summarized. Based on the reported typical functionalization strategies, we found that the modified UiO-66 derivatives and their composite membranes demonstrate ultra-high proton conductivity similar to that of commercial Nafion, indicating their great application potential in fuel cells. This Frontier article focuses on the recent development in the modification of UiO-66 type frameworks and their composite membranes and the tuning of proton conductivity with structural factors.