Unusually Low Heat of Adsorption of CO2 on AlPO and SAPO Molecular Sieves

A Copper-Based Metal-Organic Framework for Selective Separation of C2 Hydrocarbons from Methane at Ambient Conditions: Experiment and Simulation

C2 hydrocarbon separation from methane represents a technological challenge for natural gas upgrading. Herein, we report a new metal-organic framework, [Cu2L(DEF)2]·2DEF (UNT-14; H4L = 4,4',4″,4‴-((1E,1'E,1″E,1‴E)-benzene-1,2,4,5-tetrayltetrakis(ethene-2,1-diyl))tetrabenzoic acid; DEF = N,N-diethylformamide; UNT = University of North Texas). The linker design will potentially increase the surface area and adsorption energy owing to π(hydrocarbon)-π(linker)/M interactions, hence increasing C2 hydrocarbon/CH4 separation. Crystallographic data unravel an sql topology for UNT-14, whereby [Cu2(COO)4]···[L]4- paddle-wheel units afford two-dimensional porous sheets. Activated UNT-14a exhibits moderate porosity with an experimental Brunauer-Emmett-Teller (BET) surface area of 480 m2 g-1 (vs 1868 m2 g-1 from the crystallographic data). UNT-14a exhibits considerable C2 uptake capacity under ambient conditions vs CH4. GCMC simulations reveal higher isosteric heats of adsorption (Qst) and Henry's coefficients (KH) for UNT-14a vs related literature MOFs. Ideal adsorbed solution theory yields favorable adsorption selectivity of UNT-14a for equimolar C2Hn/CH4 gas mixtures, attaining 31.1, 11.9, and 14.8 for equimolar mixtures of C2H6/CH4, C2H4/CH4, and C2H2/CH4, respectively, manifesting efficient C2 hydrocarbon/CH4 separation. The highest C2 uptake and Qst being for ethane are also desirable technologically; it is attributed to the greatest number of "agostic" or other dispersion C-H bond interactions (6) vs 4/2/4 for ethylene/acetylene/methane.

Repulsive Lateral Interaction of Water Molecules at the Initial Stages of Adsorption in Microporous AlPO4-11 According to 27Al NMR and DFT

Lateral (adsorbate-adsorbate) interactions between adsorbed molecules affect various physical and chemical properties of microporous adsorbents and catalysts, influencing their functional properties. In this work, we studied the hydration of microporous AlPO4-11 aluminophosphate, which has an unusually ordered structure upon adsorption of water vapor, and according to 27Al NMR data, only tetrahedrally or octahedrally coordinated Al sites are present in the AlPO4-11. These 27Al NMR data are consistent with the results of density functional theory (DFT) calculations of hydrated AlPO4-11, which revealed the presence of a strong repulsive lateral interaction at the initial stage of adsorption, suppressing the adsorption of water on neighboring (separated by one -O-P-O- bridge) Al crystallographic sites. As a result, of all the different aluminum sites, only half of the Al1 sites adsorb two water molecules and acquire octahedral coordination.

Hierarchical Porous Activated Carbon from Wheat Bran Agro-Waste: Applications in Carbon Dioxide Capture, Dye Removal, Oxygen and Hydrogen Evolution Reactions

This work reports an efficient method for facile synthesis of hierarchically porous carbon (WB-AC) utilizing wheat bran waste. Obtained carbon showed 2.47 mmol g-1 CO2 capture capacity with good CO2 /N2 selectivity and 27.35 to 29.90 kJ mol-1 isosteric heat of adsorption. Rapid removal of MO dye was observed with a capacity of ~555 mg g-1 . Moreover, WB-AC demonstrated a good OER activity with 0.35 V low overpotential at 5 mA cm-2 and a Tafel slope of 115 mV dec-1 . It also exhibited high electrocatalytic HER activity with 57 mV overpotential at 10 mA cm-2 and a Tafel slope of 82.6 mV dec-1 . The large SSA (757 m2  g-1 ) and total pore volume (0.3696 cm3  g-1 ) result from N2 activation contributing to selective CO2 uptake, high and rapid dye removal capacity and superior electrochemical activity (OER/HER), suggesting the use of WB-AC as cost effective adsorbent and metal free electrocatalyst.

Zeolites in Adsorption Processes: State of the Art and Future Prospects

Zeolites have been widely used as catalysts, ion exchangers, and adsorbents since their industrial breakthrough in the 1950s and continue to be state-of the-art adsorbents in many separation processes. Furthermore, their properties make them materials of choice for developing and emerging separation applications. The aim of this review is to put into context the relevance of zeolites and their use and prospects in adsorption technology. It has been divided into three different sections, i.e., zeolites, adsorption on nanoporous materials, and chemical separations by zeolites. In the first section, zeolites are explained in terms of their structure, composition, preparation, and properties, and a brief review of their applications is given. In the second section, the fundamentals of adsorption science are presented, with special attention to its industrial application and our case of interest, which is adsorption on zeolites. Finally, the state-of-the-art relevant separations related to chemical and energy production, in which zeolites have a practical or potential applicability, are presented. The replacement of some of the current separation methods by optimized adsorption processes using zeolites could mean an improvement in terms of sustainability and energy savings. Different separation mechanisms and the underlying adsorption properties that make zeolites interesting for these applications are discussed.

From typical silicon-rich biomass to porous carbon-zeolite composite: A sustainable approach for efficient adsorption of CO2

Focusing on the high-valued utilization of the widespread silicon-rich waste biomass, a sustainable route by simultaneous utilization of carbon and silicon from silicon-rich rice husk was proposed in this work. Specifically, porous carbon-zeolite composite with hierarchical porous structure of micro/meso pores (carbon) and ultra-microporous pores (Na-X zeolite) was in situ prepared by a facile one-pot method. The obtained porous carbon-zeolite composite (PC₂-Z) had a higher yield of 67.66% compared to the porous carbon without silicon (PC₂) of 43.33%. Moreover, due to the high ultra-micropore volume of the PC₂-Z sample (up to 0.181 cm³/g), it exhibited high dynamic CO₂ adsorption capacity of 1.81 mmol/g and CO₂/N₂ selectivity of 9.80 (1 bar), which were higher than 1.67 mmol/g and 7.01 (1 bar) for PC₂, respectively. PC₂-Z also showed good regeneration efficiency above 99% after ten cycles. Furthermore, the economic and energy consumption assessment of this utilization route was conducted. Overall, a facile one-pot route was developed to prepare highly efficient composite absorbents from silicon-rich biomass, which can be widely used in different environmental applications.