Nature-Derived and Synthetic Additives to poly(ɛ-Caprolactone) Nanofibrous Systems for Biomedicine; an Updated Overview

Hypoxia and re-oxygenation effects on human cardiomyocytes cultured on polycaprolactone and polyurethane nanofibrous mats

Heart diseases are caused mainly by chronic oxygen insufficiency (hypoxia), leading to damage and apoptosis of cardiomyocytes. Research into the regeneration of a damaged human heart is limited due to the lack of cellular models that mimic damaged cardiac tissue. Based on the literature, nanofibrous mats affect the cardiomyocyte morphology and stimulate the growth and differentiation of cells cultured on them; therefore, nanofibrous materials can support the production of in vitro models that faithfully mimic the 3D structure of human cardiac tissue. Nanofibrous mats were used as scaffolds for adult primary human cardiomyocytes (HCM) and immature human induced pluripotent stem cell-derived cardiomyocytes (iPSC-CMs). This work focuses on understanding the effects of hypoxia and re-oxygenation on human cardiac cells cultured on polymer nanofibrous mats made of poly(ε-caprolactone) (PCL) and polyurethane (PU). The expression of selected genes and proteins in cardiomyocytes during hypoxia and re-oxygenation were evaluated. In addition, the type of cell death was analyzed. To the best of our knowledge, there are no studies on the effects of hypoxia on cardiomyocyte cells cultured on nanofibrous mats. The present study aimed to use nanofiber mats as scaffolds that structurally could mimic cardiac extracellular matrix. Understanding the impact of 3D structural properties in vitro cardiac models on different human cardiomyocytes is crucial for advancing cardiac tissue engineering and regenerative medicine. Observing how 3D scaffolds affect cardiomyocyte function under hypoxic conditions is necessary to understand the functioning of the entire human heart.

Maturation of human cardiomyocytes derived from induced pluripotent stem cells (iPSC-CMs) on polycaprolactone and polyurethane nanofibrous mats

Investigating the potential of human cardiomyocytes derived from induced pluripotent stem cells (iPSC-CMs) in in vitro heart models is essential to develop cardiac regenerative medicine. iPSC-CMs are immature with a fetal-like phenotype relative to cardiomyocytes in vivo. Literature indicates methods for enhancing the structural maturity of iPSC-CMs. Among these strategies, nanofibrous scaffolds offer more accurate mimicry of the functioning of cardiac tissue structures in the human body. However, further research is needed on the use of nanofibrous mats to understand their effects on iPSC-CMs. Our research aimed to evaluate the suitability of poly(ε-caprolactone) (PCL) and polyurethane (PU) nanofibrous mats with different elasticities as materials for the maturation of iPSC-CMs. Analysis of cell morphology and orientation and the expression levels of selected genes and proteins were performed to determine the effect of the type of nanofibrous mats on the maturation of iPSC-CMs after long-term (10-day) culture. Understanding the impact of 3D structural properties in in vitro cardiac models on induced pluripotent stem cell-derived cardiomyocyte maturation is crucial for advancing cardiac tissue engineering and regenerative medicine because it can help optimize conditions for obtaining more mature and functional human cardiomyocytes.

A Bacterial Responsive Microneedle Dressing with Hydrogel Backing Layer for Chronic Wound Treatment

The treatment of chronic wounds still presents great challenges due to being infected by biofilms and the damaged healing process. The current treatments do not address the needs of chronic wounds. In this study, a highly effective dressing (Dox-DFO@MN Hy) for the treatment of chronic wounds is described. This dressing combines the advantages of microneedles (MNs) and hydrogels in the treatment of chronic wounds. MNs is employed to debride the biofilms and break down the wound barrier, providing rapid access to therapeutic drugs from hydrogel backing layer. Importantly, to kill the pathogenic bacteria in the biofilms specifically, Doxycycline hydrochloride (Dox) is wrapped into the polycaprolactone (PCL) microspheres that have lipase-responsive properties and loaded into the tips of MNs. At the same time, hydrogel backing layer is used to seal the wound and accelerate wound healing. Benefiting from the combination of two advantages of MNs and hydrogel, the dressing significantly reduces the bacteria in the biofilms and effectively promotes angiogenesis and cell migration in vitro. Overall, Dox-DFO@MN Hy can effectively treat chronic wounds infected with biofilms, providing a new idea for the treatment of chronic wounds.

Cold atmospheric plasma modified polycaprolactone solution prior to electrospinning: A novel approach for improving quercetin-loaded nanofiber drug delivery systems

In this study, we present a novel approach for enhancing the performance of Quercetin-loaded nanofiber drug delivery systems through the modification of Polycaprolactone (PCL) solution using Cold Atmospheric Plasma (CAP) prior to electrospinning. CAP treatment was applied to PCL solutions for varying durations, namely, 0.5, 1, and 3 min. Scanning electron microscopy (SEM) and atomic force microscopy (AFM) collectively demonstrate that CAP application and QU loading induce morphological changes in nanofibers, facilitating the creation of drug delivery systems with modified fiber diameters, devoid of bead formation. CAP treatment duration correlates with varying fiber diameters, with the longest treatment (3 min) producing the largest fibers (1324 ± 387 nm). Concurrently, the incorporation of quercetin (QU) into the PCL nanofibers resulted in reduced fiber diameter. These observations emphasize the pivotal role of CAP modification in tailoring nanofiber size and morphology. Notably, minimal peak shifts indicate no significant molecular structure changes in PCL nanofibers compared to PCL solutions, assuring the absence of unwanted chemical modifications or degradation during electrospinning. Furthermore, specific QU peaks are undetectable in Fourier-transform infrared (FTIR) spectra, suggesting dispersed or amorphous QU molecules within the nanofibers. Additionally, X-ray diffraction (XRD) results demonstrate that CAP treatment does not alter the crystalline structure of the PCL nanofiber drug delivery system. Crystalline planes of PCL remain unchanged, affirming stability under CAP treatment conditions. Water contact angles indicate that CAP treatment affects nanofiber hydrophobicity, with shorter CAP treatment times rendering more hydrophilic surfaces. Cumulative QU release percentages vary, with PCL/CAP-0.5-QU exhibiting the highest release at 56 ± 2.2 %, surpassing unmodified PCL/QU. Moreover, cell viability remains comparable or slightly increased when QU is incorporated into CAP-treated PCL nanofibers, suggesting potential mitigation of cytotoxic effects induced by CAP treatment. The combination of QU and CAP treatment enhances cancer cell viability reduction, QU release from nanofibers, and drug loading efficiency in a synergistic manner.

Improving rodents and humans cardiac cell maturityin vitrothrough polycaprolactone and polyurethane nanofibers

Currently, numerous studies are conducted using nanofibers as a scaffold for culture cardiac cells; however, there still needs to be more research evaluating the impact of the physicochemical properties of polymer nanofibers on the structure and function of cardiac cells. We have studied how poly(ϵ-caprolactone) and polyurethane nanofibrous mats with different physicochemical properties influence the viability, morphology, orientation, and maturation of cardiac cells. For this purpose, the cells taken from different species were used. They were rat ventricular cardiomyoblasts (H9c2), mouse atrial cardiomyocytes (CMs) (HL-1), and human ventricular CMs. Based on the results, it can be concluded that cardiac cells cultured on nanofibers exhibit greater maturity in terms of orientation, morphology, and gene expression levels compared to cells cultured on polystyrene plates. Additionally, the physicochemical properties of nanofibers affecting the functionality of cardiac cells from different species and different parts of the heart were evaluated. These studies can support research on understanding and explaining mechanisms leading to cellular maturity present in the heart and the selection of nanofibers that will effectively help the maturation of CMs.

Enabling Proregenerative Medical Devices via Citrate-Based Biomaterials: Transitioning from Inert to Regenerative Biomaterials

Regenerative medicine aims to restore tissue and organ function without the use of prosthetics and permanent implants. However, achieving this goal has been elusive, and the field remains mostly an academic discipline with few products widely used in clinical practice. From a materials science perspective, barriers include the lack of proregenerative biomaterials, a complex regulatory process to demonstrate safety and efficacy, and user adoption challenges. Although biomaterials, particularly biodegradable polymers, can play a major role in regenerative medicine, their suboptimal mechanical and degradation properties often limit their use, and they do not support inherent biological processes that facilitate tissue regeneration. As of 2020, nine synthetic biodegradable polymers used in medical devices are cleared or approved for use in the United States of America. Despite the limitations in the design, production, and marketing of these devices, this small number of biodegradable polymers has dominated the resorbable medical device market for the past 50 years. This perspective will review the history and applications of biodegradable polymers used in medical devices, highlight the need and requirements for regenerative biomaterials, and discuss the path behind the recent successful introduction of citrate-based biomaterials for manufacturing innovative medical products aimed at improving the outcome of musculoskeletal surgeries.

Progress of biodegradable polymer application in cardiac occluders

Cardiac septal defect is the most prevalent congenital heart disease and is typically treated with open-heart surgery under cardiopulmonary bypass. Since the 1990s, with the advancement of interventional techniques and minimally invasive transthoracic closure techniques, cardiac occluder implantation represented by the Amplazter products has been the preferred treatment option. Currently, most occlusion devices used in clinical settings are primarily composed of Nitinol as the skeleton. Nevertheless, long-term follow-up studies have revealed various complications related to metal skeletons, including hemolysis, thrombus, metal allergy, cardiac erosion, and even severe atrioventricular block. Thus, occlusion devices made of biodegradable materials have become the focus of research. Over the past two decades, several bioabsorbable cardiac occluders for ventricular septal defect and atrial septal defect have been designed and trialed on animals or humans. This review summarizes the research progress of bioabsorbable cardiac occluders, the advantages and disadvantages of different biodegradable polymers used to fabricate occluders, and discusses future research directions concerning the structures and materials of bioabsorbable cardiac occluders.

Development of a multi-component gastroretentive expandable drug delivery system (GREDDS) for personalized administration of metformin

OBJECTIVES

Efficacy and compliance of type II diabetes treatment would greatly benefit from dosage forms providing controlled release of metformin in the upper gastrointestinal tract. In this respect, the feasibility of a new system ensuring stomach-retention and personalized release of this drug at its absorption window for multiple days was investigated.

METHODS

The system proposed comprised of a drug-containing core and a viscoelastic umbrella-like skeleton, which were manufactured by melt-casting and 3D printing. Prototypes, alone or upon assembly and insertion into commercially-available capsules, were characterized for key parameters: thermo-mechanical properties, accelerated stability, degradation, drug release, deployment performance, and resistance to simulated gastric contractions.

RESULTS

Each part of the system was successfully manufactured using purposely-selected materials and the performance of final prototypes matched the desired one. This included: i) easy folding of the skeleton against the core in the collapsed administered shape, ii) rapid recovery of the cumbersome configuration at the target site, even upon storage, and iii) prolonged release of metformin.

CONCLUSIONS

Composition, geometry, and performance of the system developed in this work were deemed acceptable for stomach-retention and prolonged as well as customizable release of metformin in its absorption window, laying promising bases for further development steps.

Reverse Engineering and 3D Printing of Medical Devices for Drug Delivery and Drug-Embedded Anatomic Implants

In recent years, 3D printing (3DP) has advanced traditional medical treatments. This review explores the fusion of reverse engineering and 3D printing of medical implants, with a specific focus on drug delivery applications. The potential for 3D printing technology to create patient-specific implants and intricate anatomical models is discussed, along with its ability to address challenges in medical treatment. The article summarizes the current landscape, challenges, benefits, and emerging trends of using 3D-printed formulations for medical implantation and drug delivery purposes.

Biodegradable polyester-based nano drug delivery system in cancer chemotherapy: a review of recent progress (2021-2023)

Cancer presents a formidable threat to human health, with the majority of cases currently lacking a complete cure. Frequently, chemotherapy drugs are required to impede its progression. However, these drugs frequently suffer from drawbacks such as poor selectivity, limited water solubility, low bioavailability, and a propensity for causing organ toxicity. Consequently, a concerted effort has been made to seek improved drug delivery systems. Nano-drug delivery systems based on biodegradable polyesters have emerged as a subject of widespread interest in this pursuit. Extensive research has demonstrated their potential for offering high bioavailability, effective encapsulation, controlled release, and minimal toxicity. Notably, poly (ε-caprolactone) (PCL), poly (lactic-co-glycolic acid) (PLGA), and polylactic acid (PLA) have gained prominence as the most widely utilized options as carriers of the nano drug delivery system. This paper comprehensively reviews recent research on these materials as nano-carriers for delivering chemotherapeutic drugs, summarizing their latest advancements, acknowledging their limitations, and forecasting future research directions.

Deposition and water repelling of temperature-responsive nanopesticides on leaves

Pesticides are widely used to increase agricultural productivity, however, weak adhesion and deposition lead to low efficient utilization. Herein, we prepare a nanopesticide formulation (tebuconazole nanopesticides) which is leaf-adhesive, and water-dispersed via a rapid nanoparticle precipitation method, flash nanoprecipitation, using temperature-responsive copolymers poly-(2-(dimethylamino)ethylmethylacrylate)-b-poly(ε-caprolactone) as the carrier. Compared with commercial suspensions, the encapsulation by the polymer improves the deposition of TEB, and the contact angle on foliage is lowered by 40.0°. Due to the small size and strong van der Waals interactions, the anti-washing efficiency of TEB NPs is increased by 37% in contrast to commercial ones. Finally, the acute toxicity of TEB NPs to zebrafish shows a more than 25-fold reduction as compared to commercial formulation indicating good biocompatibility of the nanopesticides. This work is expected to enhance pesticide droplet deposition and adhesion, maximize the use of pesticides, tackling one of the application challenges of pesticides.

Electrospun PVA Fibers for Drug Delivery: A Review

Innovation in biomedical science is always a field of interest for researchers. Drug delivery, being one of the key areas of biomedical science, has gained considerable significance. The utilization of simple yet effective techniques such as electrospinning has undergone significant development in the field of drug delivery. Various polymers such as PEG (polyethylene glycol), PLGA (Poly(lactic-co-glycolic acid)), PLA(Polylactic acid), and PCA (poly(methacrylate citric acid)) have been utilized to prepare electrospinning-based drug delivery systems (DDSs). Polyvinyl alcohol (PVA) has recently gained attention because of its biocompatibility, biodegradability, non-toxicity, and ideal mechanical properties as these are the key factors in developing DDSs. Moreover, it has shown promising results in developing DDSs individually and when combined with natural and synthetic polymers such as chitosan and polycaprolactone (PCL). Considering the outstanding properties of PVA, the aim of this review paper was therefore to summarize these recent advances by highlighting the potential of electrospun PVA for drug delivery systems.

Advances in Functionalization of Bioresorbable Nanomembranes and Nanoparticles for Their Use in Biomedicine

Bioresorbable nanomembranes (NMs) and nanoparticles (NPs) are powerful polymeric materials playing an important role in biomedicine, as they can effectively reduce infections and inflammatory clinical patient conditions due to their high biocompatibility, ability to physically interact with biomolecules, large surface area, and low toxicity. In this review, the most common bioabsorbable materials such as those belonging to natural polymers and proteins for the manufacture of NMs and NPs are reviewed. In addition to biocompatibility and bioresorption, current methodology on surface functionalization is also revisited and the most recent applications are highlighted. Considering the most recent use in the field of biosensors, tethered lipid bilayers, drug delivery, wound dressing, skin regeneration, targeted chemotherapy and imaging/diagnostics, functionalized NMs and NPs have become one of the main pillars of modern biomedical applications.

The influence of the ultrasonic treatment of working fluids on electrospun amorphous solid dispersions

Based on a working fluid consisting of a poorly water-soluble drug and a pharmaceutical polymer in an organic solvent, electrospinning has been widely exploited to create a variety of amorphous solid dispersions However, there have been very few reports about how to prepare the working fluid in a reasonable manner. In this study, an investigation was conducted to determine the influences of ultrasonic fluid pretreatment on the quality of resultant ASDs fabricated from the working fluids. SEM results demonstrated that nanofiber-based amorphous solid dispersions from the treated fluids treated amorphous solid dispersions exhibited better quality than the traditional nanofibers from untreated fluids in the following aspects: 1) a straighter linear morphology; 2) a smooth surface; and 3) a more evener diameter distribution. The fabrication mechanism associated with the influences of ultrasonic treatments of working fluids on the resultant nanofibers' quality is suggested. Although XRD and ATR-FTIR experiments clearly verified that the drug ketoprofen was homogeneously distributed all over the TASDs and the traditional nanofibers in an amorphous state regardless of the ultrasonic treatments, the in vitro dissolution tests clearly demonstrated that the TASDs had a better sustained drug release performance than the traditional nanofibers in terms of the initial release rate and the sustained release time periods.

3D-printed long-acting 5-fluorouracil implant to prevent conjunctival fibrosis in glaucoma

OBJECTIVES

To develop a sustained release 5-fluorouracil (5-FU) implant by three-dimensional (3D) printing to effectively prevent conjunctival fibrosis after glaucoma surgery.

METHODS

3D-printed implants composed of polycaprolactone (PCL) and chitosan (CS) were fabricated by heat extrusion technology and loaded with 1% 5-FU. Light microscopy and scanning electron microscopy were used to study the surface morphology. The 5-FU concentration released over 8 weeks was measured by ultraviolet visible spectroscopy. The effects on cell viability, fibroblast contractility and the expression of key fibrotic genes were assessed in human conjunctival fibroblasts.

KEY FINDINGS

The PCL-CS-5-FU implant sustainably released 5-FU over 8 weeks and the peak concentration was over 6.1 μg/ml during weeks 1 and 2. The implant had a smooth surface and its total weight decreased by 3.5% after 8 weeks. The PCL-CS-5-FU implant did not affect cell viability in conjunctival fibroblasts and sustainably suppressed fibroblast contractility and key fibrotic genes for 8 weeks.

CONCLUSIONS

The PCL-CS-5-FU implant was biocompatible and degradable with a significant effect in suppressing fibroblast contractility. The PCL-CS-5-FU implant could be used as a sustained release drug implant, replacing the need for repeated 5-FU injections in clinic, to prevent conjunctival fibrosis after glaucoma surgery.

Six-year follow-up outcomes of the P(LLA-CL)/Fg bio-patch for anterior vaginal wall prolapse treatment

INTRODUCTION AND HYPOTHESIS

There were few data about the long-term outcomes of bio-compatible patches for pelvic organ prolapse (POP). The efficacy of poly (L-lactide-co-caprolactone) blended with fibrinogen [P(LLA-CL)/Fg] bio-patches were investigated for anterior vaginal wall prolapse treatment in a 6-year follow-up.

METHODS

The P(LLA-CL)/Fg bio-patch was fabricated through electrospinning. Nineteen patients with symptomatic anterior prolapse (Pelvic Organ Prolapse Quantification [POP-Q] stage ≥ 2) were treated with anterior pelvic reconstruction surgery using a P(LLA-CL)/Fg bio-patch and were followed up at 1, 2, 3, 6 months, and 6 years. The primary outcome was objective anatomical cure (anterior POP-Q stage ≤ 1). Secondary outcomes included complications, MRI evaluation, and scores of the Pelvic Floor Impact Questionnaire-7 (PFIQ-7) and the Pelvic Floor Distress Inventory-20 (PFDI-20).

RESULTS

The micro-morphology of the bio-patch resembled the extracellular matrix, which was suitable for the growth of fibroblasts. Sixteen (84.2%) patients were finally assessed, with a mean follow-up of 6.08 ± 0.18 years. The cure rate without anterior prolapse recurrence was 93.8% at 6 years. Compared with baseline, the POP-Q measurements of Aa, Ba, and C points and scores of PFIQ-7 and PFDI-20 manifested significant differences at all times (all p < 0.05). One (5.26%) case of bio-patch-related infection, 1 (5.26%) case of urinary retention, and no exposures and erosion occurred. MRI evaluation showed that the bio-patch gradually degraded to fragments at 1 month and was completely absorbed at 3 months.

CONCLUSIONS

Among long-term follow-ups, anterior pelvic reconstruction surgery with a P(LLA-CL)/Fg bio-patch demonstrated significant improvements in anatomical correction of anterior pelvic prolapse and pelvic function without severe morbidity.

Lipase-Responsive Amphotericin B Loaded PCL Nanoparticles for Antifungal Therapies

Amphotericin B is an antifungal drug used for the treatment of invasive fungal infections. However, its clinical use is limited due to its serious side effects, such as renal and cardiovascular toxicity. Furthermore, amphotericin B is administered in high doses due to its poor water solubility. Hence, it is necessary to develop an on-demand release strategy for the delivery of amphotericin B to reduce cytotoxicity. The present report describes a novel encapsulation of amphotericin B into lipase-sensitive polycaprolactone to form a nanocomposite. Nanocomposites were produced by the oil-in-water method and their physicochemical properties such as size, hydrodynamic diameter, drug loading, and zeta potential were determined. The in vitro release of amphotericin B was characterized in the presence and absence of lipase. The antifungal activity of the nanocomposites was verified against lipase-secreting Candida albicans, and cytotoxicity was tested against primary human dermal fibroblasts. In the absence of lipase, the release of amphotericin B from the nanocomposites was minimal. However, in the presence of lipase, an enzyme that is abundant at infection sites, a fungicidal concentration of amphotericin B was released from the nanocomposites. The antifungal activity of the nanocomposites showed an enhanced effect against the lipase-secreting fungus, Candida albicans, in comparison to the free drug at the same concentration. Furthermore, nanoencapsulation significantly reduced amphotericin B-related cytotoxicity compared to the free drug. The synthesized nanocomposites can serve as a potent carrier for the responsive delivery of amphotericin B in antifungal applications.

Preparation of Triptolide Nano Drug Delivery System and Its Antitumor Activity In-Vitro

Triptolide (as an effective antitumor drug) is limited in clinical application because of its poor solubility and absorption in-vivo. Herein, we prepared folic acid modified polymer micelles to encapsulate triptolide and enhance its biologicalavailability coupled with antitumor effect. We prepared nano-micelles of triptolide through thin lipid film hydrational method. Physical properties and in vitro release characterization of Fol-Plla-cl-Peg-Plla-cl-Tmicelles were evaluated, while bioavailability of the formulation in rats was investigated. Tumor targeting potential of micelles was determined by observing the uptake of A549 cells. In-Vitro antitumor activity of micelles and free triptolide (API) was investigated with MTT assay. The prepared polymer material exhibited no cytotoxicity. The particle size distribution of Fol-Plla-cl-Peg-Plla-cl-T micelles was uniform and small, with good stability and high efficiency of entrapment. Triptolide In-Vitro release from micelles demonstrated slow and continuous released for 24 h. Compared with API, the half-life of micelles was prolonged, whilst its bioavailability in-vivo was increased by about 6.35 times. More importantly, Fol-Plla-cl-Peg-Plla-cl-T micelles significantly improved the antitumor activity of triptolide and showed good tumor targeting potential. Fol-Plla-cl-Peg-Plla-cl-T micelles could improve the bioavailability and antitumor activity of triptolide, amid demonstration of good tumor targeting and high safety.

[Conjunctival reconstruction-State of the art of regenerative treatment forms beyond the limbus]

BACKGROUND

The demands on conjunctival replacement tissues are high: they need to be elastic, clinically compatible, surgically feasible and support goblet cell growth.

OBJECTIVE

This article provides an overview of currently applied conjunctival replacement tissues and those under investigation.

METHOD

Current publications on clinically applied conjunctival replacement tissues and substrates which are the subject of scientific research and those already tested in animal models are presented and discussed.

RESULTS

Replacement tissues in clinical use are autologous and allogenic conjunctiva, nasal and oral mucous membranes, amniotic membrane and decellularized tissues. Autologous conjunctiva shows good results but is not suitable for large defects due to limited availability. In these cases autologous nasal and oral mucous membranes can be used; however, success is limited in cases of autoimmune diseases. Amniotic membranes are frequently applied clinically but goblet cell growth is limited. Different decellularized tissues are used clinically and goblet cell growth was found in vivo. Robust comparative studies are not yet available. Biological matrices such as fibrin, collagen, elastin, gelatin or hyaluronate and synthetic tissues from the group of polyesters are being investigated in the laboratory and in animal models. These studies show good epithelialization and goblet cell growth in vivo.

CONCLUSION

Transplantation of conjunctiva, nasal and oral mucous membranes and amniotic membranes show satisfactory clinical results but exhibit individual weaknesses. Further studies in animal models and clinical settings are required to further evaluate the benefits of other matrices, such as cell-free tissues or other biological and synthetic matrices.

Electrospun Ta-MOF/PEBA Nanohybrids and Their CH4 Adsorption Application

For the first time, biocompatible and biodegradable Ta-metal organic framework (MOF)/polyether block amide (PEBA) fibrous polymeric nanostructures were synthesized by ultrasonic and electrospinning routes in this study. The XRD peaks of products were wider, which is due to the significant effect of the ultrasonic and electrospinning methods on the final product. The adsorption/desorption behavior of the nanostructures is similar to that of the third type of isotherm series, which showed mesoporous behavior for the products. The sample has uniform morphology without any evidence of agglomeration. Since the adsorption and trapping of gaseous pollutants are very important, the application of the final Ta-MOF/PEBA fibrous polymeric nanostructures was investigated for CH4 adsorption. In order to achieve the optimal conditions of experiments and also systematic studies of the parameters, fractional factorial design was used. The results showed that by selecting temperature 40°C, time duration 35 min, and pressure 3 bar, the CH4 gas adsorption rate was near 4 mmol/g. Ultrasonic and electrospinning routes as well as immobilization of Ta-MOF in the PEBA fibrous network affect the performance of the final products for CH4 gas adsorption.

Resveratrol Microencapsulation into Electrosprayed Polymeric Carriers for the Treatment of Chronic, Non-Healing Wounds

Chronic, non-healing wounds represent a challenging socio-economic burden, demanding innovative approaches for successful wound management. Resveratrol (RSV) represents a promising therapeutic candidate, but its therapeutic efficacy and clinical applicability have been hampered by its rapid degradation and/or depletion. Herein, RSV was encapsulated into poly(ε-caprolactone) (PCL) microparticles by electrospraying with the aim to prolong and preserve RSV’s release/activity, without affecting its therapeutic properties. Electrospraying led to the fabrication of spherical (2 to 10 μm in size), negatively charged (<−1 mV), and quasi-monodisperse (PDI < 0.3) microparticles, with 60% RSV release after 28 days. Microencapsulation of RSV into PCL prevented its photochemical degradation and preserved its antioxidant properties over 72 h. The RSV-PCL microparticles did not exhibit any cytotoxicity on human dermal fibroblasts. RSV released from the microparticles was biologically functional and induced a significant increase in collagen type I deposition. Furthermore, the produced RSV-PCL microparticles reduced the expression of inflammatory (IL-6, IL-8, COX-2) and proteolytic (MMP-2, MMP-9) mediators. Collectively, our data clearly illustrate the potential of electrosprayed polymeric carriers for the sustained delivery of RSV to treat chronic wounds.