Development and Preliminary Application of Multiplex Loop-Mediated Isothermal Amplification Coupled With Lateral Flow Biosensor for Detection of Mycobacterium tuberculosis Complex

Development and Validation of a Highly Sensitive RT-qLAMP Assay for Rapid Detection of SARS-CoV-2: Methodological Aspects

Specific and reliable diagnostic methods are becoming increasingly essential to identify patients in light of the high transmission rate and the recent appearance of the new variants of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2). For the specific detection of SARS-CoV-2, our quantitative reverse transcription loop-mediated isothermal amplification (RT-qLAMP) assay implementation demonstrates how flexible it can be with two readouts: visualized colorimetric and real-time fluorescence. Different factors were optimized to improve the reaction conditions, including temperature (60 °C), assay runtime (60 min), primers, MgSO4 (6 mM), dNTPs (1 mM), LAMP Buffer (1.2 mM Tris-HCl), KCl (50 mM), pH (8), and phenol red (10 mM) concentrations. Regarding analytical sensitivity, the colorimetric RT-LAMP method detected samples with Ct values up to 29, while the RT-qLAMP assay identified up to Ct = 31. RT-qLAMP was evaluated on 40 clinical samples (25 positives and 15 negatives) for viral RNA detection. All negative samples were found negative through fluorescent reading in RT-qLAMP and quantitative reverse transcription PCR (RT-qPCR) assays. Twenty-three clinically positive samples demonstrated a positive RT-qLAMP reaction (up to Ct ≤ 31) with 92% clinical sensitivity, 100% clinical specificity, 100% positive predictive value (PPV), 88.24% negative predictive values (NPV), and 95% accuracy.

Establishment and evaluation of a new fluorescent probe method based on loop-mediated isothermal amplification for the detection of Mycobacterium tuberculosis complex

We aimed to develop a novel diagnostic method called multiplex fluorescence of loop primer upon self-dequenching loop-mediated isothermal amplification (mFLOS-LAMP) for the rapid detection of Mycobacterium tuberculosis complex (MTBC). A set of specific primers was designed to target the detection of IS1081 and IS6110 genes, which are insertion sequences within the MTBC. The 110 sputum specimens collected were assessed using the established mFLOS-LAMP method, multiplex polymerase chain reaction, Xpert MTB/RIF, and smear microscopy. The optimal reaction temperature and duration for mFLOS-LAMP were determined to be 65°C and 30 min, respectively, by optimizing the entire system. The detection sensitivity of mFLOS-LAMP was 6.0 × 101 CFU/mL, by Bacillus Calmette-Guerin, and the mFLOS-LAMP sensitivity of M. tuberculosis H37Rv genomic DNA was 500 fg, and the specificity was 100%. The sensitivity of mFLOS-LAMP was 94.2% and the specificity was 96.6%, when Xpert MTB/RIF was used as the reference method. There was no statistically significant difference in their detection rate (χ2 = 0, P = 1.000), and the consistency was good (kappa = 0.909, P < 0.001). The receiver operating characteristic analysis yielded the maximum area under the curve of 0.954. The mFLOS-LAMP method demonstrated high sensitivity and specificity, allowing for swift and accurate detection of MTBC.

Development and preliminary assessment of a CRISPR-Cas12a-based multiplex detection of Mycobacterium tuberculosis complex

Since the onset of the COVID-19 pandemic in 2020, global efforts towards tuberculosis (TB) control have encountered unprecedented challenges. There is an urgent demand for efficient and cost-effective diagnostic technologies for TB. Recent advancements in CRISPR-Cas technologies have improved our capacity to detect pathogens. The present study established a CRISPR-Cas12a-based multiplex detection (designated as MCMD) that simultaneously targets two conserved insertion sequences (IS6110 and IS1081) to detect Mycobacterium tuberculosis complex (MTBC). The MCMD integrated a graphene oxide-assisted multiplex recombinase polymerase amplification (RPA) assay with a Cas12a-based trans-cleavage assay identified with fluorescent or lateral flow biosensor (LFB). The process can be performed at a constant temperature of around 37°C and completed within 1 h. The limit of detection (LoD) was 4 copies μL-1, and no cross-reaction was observed with non-MTBC bacteria strains. This MCMD showed 74.8% sensitivity and 100% specificity in clinical samples from 107 patients with pulmonary TB and 40 non-TB patients compared to Xpert MTB/RIF assay (63.6%, 100%). In this study, we have developed a straightforward, rapid, highly sensitive, specific, and cost-effective assay for the multiplex detection of MTBC. Our assay showed superior diagnostic performance when compared to the widely used Xpert assay. The novel approach employed in this study makes a substantial contribution to the detection of strains with low or no copies of IS6110 and facilitates point-of-care (POC) testing for MTBC in resource-limited countries.

Simultaneous and Visual Detection of KPC and NDM Carbapenemase-Encoding Genes Using Asymmetric PCR and Multiplex Lateral Flow Strip

Carbapenem-resistant Enterobacteriaceae (CRE) infections constitute a threat to public health, and KPC and NDM are the major carbapenemases of concern. Rapid diagnostic tests are highly desirable in point-of-care (POC) and emergency laboratories with limited resources. Here, we developed a multiplex lateral flow assay based on asymmetric PCR and barcode capture probes for the simultaneous detection of KPC-2 and NDM-1. Biotinylated barcode capture probes corresponding to the KPC-2 and NDM-1 genes were designed and cast onto two different sensing zones of a nitrocellulose membrane after reacting with streptavidin to prepare a multiplex lateral flow strip. Streptavidin-coated gold nanoparticles (SA-AuNPs) were used as signal reporters. In response to the target carbapenemase genes, biotin-labelled ssDNA libraries were produced by asymmetric PCR, which bond to SA-AuNPs via biotin and hybridise with the barcode capture probe via a complementary sequence, thereby bridging SA-AuNPs and the barcode capture probe to form visible red lines on the detection zones. The signal intensities were proportional to the number of resistance genes tested. The strip sensor showed detection limits of 0.03 pM for the KPC-2 and 0.07 pM for NDM-1 genes, respectively, and could accurately distinguish between KPC-2 and NDM-1 genes in CRE strains. For the genotyping of clinical isolates, our strip exhibited excellent consistency with real-time fluorescent quantitative PCR and gene sequencing. Given its simplicity, cost-effectiveness, and rapid analysis accomplished by the naked eye, the multiplex strip is promising auxiliary diagnostic tool for KPC-2 and NDM-1 producers in routine clinical laboratories.

Diagnosis of pleural tuberculosis by multi-targeted loop-mediated isothermal amplification assay based on SYBR Green I reaction: comparison with GeneXpert® MTB/RIF assay

BACKGROUND

Diagnosis of pleural tuberculosis (TB) is tedious owing to its close resemblance with malignant pleural effusion and sparse bacterial load in clinical specimens. There is an immediate need to design a rapid and dependable diagnostic test to prevent unnecessary morbidity/mortality.

RESEARCH DESIGN AND METHODS

A multi-targeted loop-mediated isothermal amplification (MT-LAMP) was deliberated using mpt64 and IS6110 to diagnose pleural TB within pleural fluids/biopsies. MT-LAMP products were analyzed by gel-based and visual detection methods, viz. SYBR Green I, SYBR Green I+deoxyuridine triphosphate uracil-N-glycosylase (dUTP-UNG), and dry methyl green reactions.

RESULTS

In a pilot study, while assessing pleural TB/non-TB control subjects (n = 40), both SYBR Green I+dUTP-UNG/gel-based MT-LAMP assays exhibited better sensitivity/specificity than SYBR Green I and dry methyl green MT-LAMP. Since it is facile to work with SYBR Green I+dUTP-UNG than gel-based MT-LAMP, we validated the performance of SYBR Green I+dUTP-UNG in a higher number of specimens (n = 97), which revealed somewhat higher sensitivity (85.2 vs. 81.5%) and specificity (97.7 vs. 90.7%) than SYBR Green I MT-LAMP. Furthermore, the sensitivity attained by SYBR Green I+dUTP-UNG MT-LAMP was significantly higher (p < 0.001) than GeneXpert.

CONCLUSIONS

Our SYBR Green I+dUTP-UNG MT-LAMP is a simple and reliable method to diagnose pleural TB, which may translate into a point-of-care test.

Ultrafast, One-Step, Label-Based Biosensor Diagnosis Platform for the Detection of Mycobacterium tuberculosis in Clinical Applications

Tuberculosis (TB) is a chronic infectious disease caused by the etiological agent Mycobacterium tuberculosis (MTB). Because the majority of TB patients come from poor economic backgrounds, the development of a simple, specific, low-cost, and highly sensitive detection method for the pathogen is extremely important for the prevention and treatment of this disease. In the current study, an efficient detection method for visual, rapid, and highly sensitive detection of MTB utilizing multiplex loop-mediated isothermal amplification combined with a label-based lateral flow immunoassay biosensor (mLAMP-LFIA) was developed. Three specific primer sets targeting the MTB genes IS6110 and mpb64 were successfully designed and synthesized for the LAMP assay. The optimal reaction conditions for the mLAMP-LFIA assay were confirmed to be 67 °C for 40 min. The mLAMP amplicons were intuitively verified using the LFIA biosensor within 5 min. The entire process, including clinical sample processing, amplification reaction, and product verification, was completed within 80 min. The limit of detection of the mLAMP-LFIA assay established in the current study was 100 fg per reaction for the genomic DNA of MTB H37Rv. The analytical specificity of the mLAMP-LFIA assay was one hundred percent, and no cross-reactions with non-target strains were detected. Compared with the GeneXpert test, the sensitivity of mLAMP-LFIA for 148 clinical specimens was 100% (97/97), and the specificity was 98.04% (50/51) in the preliminary evaluation of the clinical application. Hence, the mLAMP-LFIA method, targeting the IS6110 and mpb64 genes, is an ultrafast, one-step, low-cost, and highly sensitive detection method that could be used as a screening and/or diagnostic tool for MTB in the clinical setting, basic science laboratories, and especially in resource-poor regions.

A Comprehensive Evaluation of a Loop-Mediated Isothermal Amplification Assay for the Diagnosis of Pulmonary Tuberculosis in Children Using Bronchoalveolar Lavage Fluid

Objective

Using TB-LAMP for diagnosing pediatric PTB, however, still requires systematic evaluation. Here, we evaluated TB-LAMP performance alone and in combination with conventional assays for diagnosing PTB in Chinese children, using mycobacterial culture or CCRS (the composite clinical reference standard) as references.

Design or Methods

BALF samples were collected at Shenyang Tenth People’s Hospital from 251 children susceptible to TB infection with indications for fiberoptic bronchoscopy.

Results

When mycobacterial culture was the reference, TB-LAMP used alongside smear microscopy doubled sensitivity for detecting pediatric PTB compared with smear microscopy alone (82.5% vs 40.0%). When CCRS was the reference, AFB microscopy, MTB culture, and TB-LAMP had sensitivities of 16.5%, 30.1%, and 51.1%, respectively, and specificities of 98.2%, 100.0%, and 99.1%. Combining MTB culture with TB-LAMP gave a sensitivity of 61.1% and specificity of 96.6%. TB-LAMP identified 39.3% and 43.2% of cases with negative MTB culture or AFB microscopy results.

Conclusion

TB-LAMP using BALF samples provided faster results, allowing early and accurate PTB diagnosis. Our findings provide insights for optimizing diagnostic algorithms for pediatric PTB.

Rapid and Visual Differentiation of Mycobacterium tuberculosis From the Mycobacterium tuberculosis Complex Using Multiplex Loop-Mediated Isothermal Amplification Coupled With a Nanoparticle-Based Lateral Flow Biosensor

Tuberculosis (TB) is a chronic infectious disease mainly caused by Mycobacterium tuberculosis (MTB), but other members of the Mycobacterium tuberculosis complex (MTBC), especially Mycobacterium bovis (pyrazinamide-resistant organisms), may also be involved. Thus, the ability to rapidly detect and identify MTB from other MTBC members (e.g., M. bovis, Mycobacterium microti, Mycobacterium africanum) is essential for the prevention and treatment of TB. A novel diagnostic method for the rapid detection and differentiation of MTB, which employs multiplex loop-mediated isothermal amplification (mLAMP) combined with a nanoparticle-based lateral flow biosensor (LFB), was established (mLAMP-LFB). Two sets of specific primers that target the IS6110 and mtp40 genes were designed according to the principle of LAMP. Various pathogens were used to optimize and evaluate the mLAMP-LFB assay. The optimal conditions for mLAMP-LFB were determined to be 66°C and 40 min, and the amplicons were directly verified by observing the test lines on the biosensor. The LAMP assay limit of detection (LoD) was 125 fg per vessel for the pure genomic DNA of MTB and 4.8 × 10³ CFU/ml for the sputum samples, and the analytical specificity was 100%. In addition, the whole process, including the clinical specimen processing (35 min), isothermal amplification (40 min), and result confirmation (1-2 min), could be completed in approximately 80 min. Thus, mLAMP-LFB is a rapid, reliable, and sensitive method that is able to detect representative members of MTBC and simultaneously differentiate MTB from other MTBC members, and it can be used as a potential screening tool for TB in clinical, field, and basic laboratory settings.