Influence of physicochemical characteristics of calcium phosphate-based biomaterials in cranio-maxillofacial bone regeneration. A systematic literature review and meta-analysis of preclinical models

Objectives

Calcium phosphate-based biomaterials (CaP) are the most widely used biomaterials to enhance bone regeneration in the treatment of alveolar bone deficiencies, cranio-maxillofacial and periodontal infrabony defects, with positive preclinical and clinical results reported. This systematic review aimed to assess the influence of the physicochemical properties of CaP biomaterials on the performance of bone regeneration in preclinical animal models.

Methods

The PubMed, EMBASE and Web of Science databases were searched to retrieve the preclinical studies investigating physicochemical characteristics of CaP biomaterials. The studies were screened for inclusion based on intervention (physicochemical characterization and in vivo evaluation) and reported measurable outcomes.

Results

A total of 1532 articles were retrieved and 58 studies were ultimately included in the systematic review. A wide range of physicochemical characteristics of CaP biomaterials was found to be assessed in the included studies. Despite a high degree of heterogeneity, the meta-analysis was performed on 39 studies and evidenced significant effects of biomaterial characteristics on their bone regeneration outcomes. The study specifically showed that macropore size, Ca/P ratio, and compressive strength exerted significant influence on the formation of newly regenerated bone. Moreover, factors such as particle size, Ca/P ratio, and surface area were found to impact bone-to-material contact during the regeneration process. In terms of biodegradability, the amount of residual graft was determined by macropore size, particle size, and compressive strength.

Conclusion

The systematic review showed that the physicochemical characteristics of CaP biomaterials are highly determining for scaffold's performance, emphasizing its usefulness in designing the next generation of bone scaffolds to target higher rates of regeneration.

Metal-Drug Coordination Nanoparticles and Hydrogels for Enhanced Delivery

Drug delivery is a key component of nanomedicine, and conventional delivery relies on the adsorption or encapsulation of drug molecules to a nanomaterial. Many delivery vehicles contain metal ions, such as metal-organic frameworks, metal oxides, transition metal dichalcogenides, MXene, and noble metal nanoparticles. These materials have a high metal content and pose potential long-term toxicity concerns leading to difficulties for clinical approval. In this review, recent developments are summarized in the use of drug molecules as ligands for metal coordination forming various nanomaterials and soft materials. In these cases, the drug-to-metal ratio is much higher than conventional adsorption-based strategies. The drug molecules are divided into small-molecule drugs, nucleic acids, and proteins. The formed hybrid materials mainly include nanoparticles and hydrogels, upon which targeting ligands can be grafted to improve efficacy and further decrease toxicity. The application of these materials for addressing cancer, viral infection, bacterial infection inflammatory bowel disease, and bone diseases is reviewed. In the end, some future directions are discussed from fundamental research, materials science, and medicine.

Lyophilized platelet rich fibrin and gelatin incorporated bioadhesive bone cement composite for repair of mandibular continuity defects

Mandibular continuity defects stem from conditions such as malignancies, trauma, cysts, osteomyelitis and osteoradionecrosis, presenting significant challenges. If mandibular reconstruction fails, it can result in facial collapse, causing significant aesthetic and functional concerns for the patient. In the present study we developed a bio-adhesive Bone Cement (BC) enriched with lyophilised PRF and gelatin to enhance bone repair and induce regeneration. The developed BC consisted of a mixture of Tetracalcium Phosphate (TTCP) and O-Phospho-l-serine (OPLS) in addition to lyophilised Platelet Rich Fibrin (PRF) for sustained growth factor release and gelatin (GE) for improved cement resorption. It is primarily designed for in-situ application, conforming to the shape and size of the defect for effective bone repair and regeneration. The study evaluated four groups: (i) BC (control), (ii) BC-GE (control), (iii) BC-PRF, and (iv) BC-GE-PRF. All the four groups were characterised using FTIR, SEM and XRD. The mechanical studies of the prepared beads exhibited a significant increase in the compressive strength of the PRF loaded bone cement composites. In vitro degradation study of the beads over a 60-day period revealed a significantly higher percentage of bone cement resorption in the gelatin-incorporated groups, BC-GE (44 ± 0.5 %), and BC-GE-PRF (45 ± 2 %). The assessment of growth factor release (TGF-β and VEGF) using ELISA revealed a prolonged and sustained release of both growth factors over a 28-day period. In vitro studies were performed on human Dental Follicle Stem Cells (DFSCs) to assess cell attachment, proliferation, mineralisation and osteogenic differentiation. These studies clearly depicted that BC-PRF and BC-GE-PRF showed significantly greater proliferation of DFSCs. Furthermore, BC-PRF and BC-GE-PRF samples exhibited notably elevated expression of Runx2 and OPN (osteogenic markers), as well as a higher intensity of alizarin red stain (mineralisation). Therefore, it was concluded that PRF incorporated bioadhesive bone cement composites greatly enhance the cell attachment, proliferation, mineralisation and osteogenic differentiation of the DFSCs. Thus, the PRF and gelatin incorporated bone cement composites is expected to facilitate effective and faster bone regeneration and healing in a wide range of dental and maxillofacial defects.

Three-dimensional (3D) printing in dental practice: Applications, areas of interest, and level of evidence

OBJECTIVES

The aim of this review to overview three-dimensional (3D) printing technologies available for different dental disciplines, considering the applicability of such technologies and materials development.

MATERIALS AND METHODS

Source Arksey and O'Malley's five stages framework using PubMed, EMBASE, and Scopus (Elsevier) databases managed this review. Papers focusing on 3D printing in dentistry and written in English were screened. Scientific productivity by the number of publications, areas of interest, and the focus of the investigations in each dental discipline were extracted.

RESULTS

Nine hundred thirty-four studies using 3D printing in dentistry were assessed. Limited clinical trials were observed, especially in Restorative, endodontics, and pediatric dentistry. Laboratory or animal studies are not reliable for clinical success, suggesting that clinical trials are a good approach to validate the new methods' outcomes and ensure that the benefits outweigh the risk. The most common application for 3D printing technologies is to facilitate conventional dental procedures.

CONCLUSIONS

The constantly improving quality of 3D printing applications has contributed to increasing the popularity of these technologies in dentistry; however, long-term clinical studies are necessary to assist in defining standards and endorsing the safe application of 3D printing in dental practice.

CLINICAL RELEVANCE

The recent progress in 3D materials has improved dental practice capabilities over the last decade. Understanding the current status of 3D printing in dentistry is essential to facilitate translating its applications from laboratory to the clinical setting.

Leveraging Dissolution by Autoinjector Designs

Chemical warfare or terrorism attacks with organophosphates may place intoxicated subjects under immediate life-threatening and psychologically demanding conditions. Antidotes, such as the oxime HI-6, which must be formulated as a powder for reconstitution reflecting the molecule's light sensitivity and instability in aqueous solutions, dramatically improve recovery-but only if used soon after exposure. Muscle tremors, anxiety, and loss of consciousness after exposure jeopardize proper administration, translating into demanding specifications for the dissolution of HI-6. Reflecting the patients' catastrophic situation and anticipated desire to react immediately to chemical weapon exposure, the dissolution should be completed within ten seconds. We are developing multi-dose and single-dose autoinjectors to reliably meet these dissolution requirements. The temporal and spatial course of dissolution within the various autoinjector designs was profiled colorimetrically. Based on these colorimetric insights with model dyes, we developed experimental setups integrating online conductometry to push experiments toward the relevant molecule, HI-6. The resulting blueprints for autoinjector designs integrated small-scale rotor systems, boosting dissolution across a wide range of viscosities, and meeting the required dissolution specifications driven by the use of these drug products in extreme situations.

Calcium Orthophosphate (CaPO4)-Based Bioceramics: Preparation, Properties, and Applications

Various types of materials have been traditionally used to restore damaged bones. In the late 1960s, a strong interest was raised in studying ceramics as potential bone grafts due to their biomechanical properties. A short time later, such synthetic biomaterials were called bioceramics. Bioceramics can be prepared from diverse inorganic substances, but this review is limited to calcium orthophosphate (CaPO4)-based formulations only, due to its chemical similarity to mammalian bones and teeth. During the past 50 years, there have been a number of important achievements in this field. Namely, after the initial development of bioceramics that was just tolerated in the physiological environment, an emphasis was shifted towards the formulations able to form direct chemical bonds with the adjacent bones. Afterwards, by the structural and compositional controls, it became possible to choose whether the CaPO4-based implants would remain biologically stable once incorporated into the skeletal structure or whether they would be resorbed over time. At the turn of the millennium, a new concept of regenerative bioceramics was developed, and such formulations became an integrated part of the tissue engineering approach. Now, CaPO4-based scaffolds are designed to induce bone formation and vascularization. These scaffolds are usually porous and harbor various biomolecules and/or cells. Therefore, current biomedical applications of CaPO4-based bioceramics include artificial bone grafts, bone augmentations, maxillofacial reconstruction, spinal fusion, and periodontal disease repairs, as well as bone fillers after tumor surgery. Prospective future applications comprise drug delivery and tissue engineering purposes because CaPO4 appear to be promising carriers of growth factors, bioactive peptides, and various types of cells.