Organic Acid Excretion in Penicillium ochrochloron Increases with Ambient pH

Molding the future: Optimization of bioleaching of rare earth elements from electronic waste by Penicillium expansum and insights into its mechanism

The recovery of rare earth elements (REE) from electronic waste is crucial for ensuring future demand security, as there is a high supply risk for this group of elements, and mitigating the environmental impacts of conventional mining. This research focuses on extracting REE from waste printed circuit boards through bioleaching, addressing the limited attention given to this source. A strain of Penicillium expansum demonstrated efficient bioleaching under optimal conditions of 7.5 initial pH, 0.1 mM phosphate concentration, and excluding a buffering agent. The study achieved significant improvements in La and Tb extraction and enhancements in Pr, Nd, and Gd recovery, approaching 70 % within 24 h. Fungal mechanisms involved in REE extraction included fungal pH control, organic acid biosynthesis, phosphate bioavailability, and potential fungal proton pump involvement. This approach offers a promising solution for sustainable REE recovery from e-waste, contributing to resource security and circular economy.

Effects of Bacterial and Fungal Inocula on Biomass, Ecophysiology, and Uptake of Metals of Alyssoides utriculata (L.) Medik

The inoculation of plants with plant-growth-promoting microorganisms (PGPM) (i.e., bacterial and fungal strains) is an emerging approach that helps plants cope with abiotic and biotic stresses. However, knowledge regarding their synergic effects on plants growing in metal-rich soils is limited. Consequently, the aim of this study was to investigate the biomass, ecophysiology, and metal accumulation of the facultative Ni-hyperaccumulator Alyssoides utriculata (L.) Medik. inoculated with single or mixed plant-growth-promoting (PGP) bacterial strain Pseudomonas fluorescens Migula 1895 (SERP1) and PGP fungal strain Penicillium ochrochloron Biourge (SERP03 S) on native serpentine soil (n = 20 for each treatment). Photosynthetic efficiency (Fv/Fm) and performance indicators (PI) had the same trends with no significant differences among groups, with Fv/Fms > 1 and PI up to 12. However, the aboveground biomass increased 4-5-fold for single and mixed inoculated plants. The aboveground/belowground dry biomass ratio was higher for plants inoculated with fungi (30), mixed (21), and bacteria (17). The ICP-MS highlighted that single and mixed inocula were able to double the aboveground biomass' P content. Mn metal accumulation significantly increased with both single and mixed PGP inocula, and Zn accumulation increased only with single PGP inocula, whereas Cu accumulation increased twofold only with mixed PGP inocula, but with a low content. Only Ni metal accumulation approached the hyperaccumulation level (Ni > 1000 mg/kg DW) with all treatments. This study demonstrated the ability of selected single and combined PGP strains to significantly increase plant biomass and plant tolerance of metals present in the substrate, resulting in a higher capacity for Ni accumulation in shoots.

Genome-wide comparison deciphers lifestyle adaptation and glass biodeterioration property of Curvularia eragrostidis C52

Glass biodeterioration by fungi has caused irreversible damage to valuable glass materials such as cultural heritages and optical devices. To date, knowledge about metabolic potential and genomic profile of biodeteriorative fungi is still scarce. Here, we report for the first time the whole genome sequence of Curvularia eragrostidis C52 that strongly degraded silica-based glasses coated with fluorine and hafnium, as expressed by the hyphal surface coverage of 46.16 ± 3.3% and reduced light transmission of 50.93 ± 1.45%. The genome of C. eragrostidis C52 is 36.9 Mb long with a GC content of 52.1% and contains 14,913 protein-coding genes, which is the largest genome ever recorded in the genus Curvularia. Phylogenomic analysis revealed C. eragrostidis C52 formed a distinct cluster with Curvularia sp. IFB-Z10 and was not evolved from compared genomes. Genome-wide comparison showed that strain C52 harbored significantly higher proportion of proteins involved in carbohydrate-active enzymes, peptidases, secreted proteins, and transcriptional factors, which may be potentially attributed to a lifestyle adaptation. Furthermore, 72 genes involved in the biosynthesis of 6 different organic acids were identified and expected to be crucial for the fungal survival in the glass environment. To form biofilm against stress, the fungal strain utilized 32 genes responsible for exopolysaccharide production. These findings will foster a better understanding of the biology of C. eragrostidis and the mechanisms behind fungal biodeterioration in the future.

Physiological mechanisms by which gypsum increases the growth and yield of Lentinula edodes

Lentinula edodes is one of the most important commercially cultivated edible mushrooms. It is well known that gypsum (CaSO₄·2H₂O) supplementation in sawdust medium increases the yield of L. edodes, while the physiological mechanisms remain unclear. Our previous study showed that the acidification of the medium to pH 3.5-4.0 was essential for the growth of L. edodes. In this study, it was found that the oxalic acid excreted by L. edodes was responsible for the acidification of the medium. The biosynthesis of oxalic acid was regulated by the ambient pH and buffer capacity of the medium. To acidify the sawdust medium, the concentrations of total and soluble oxalate were 51.1 mmol/kg and 10.8 mmol/kg, respectively. However, when the concentration of soluble oxalate was 8.0 mmol/kg, the mycelial growth rate decreased by 29% compared with the control. Soluble oxalate was toxic to L. edodes, while soluble sulfate was nontoxic. CaSO₄ reacted with soluble oxalate to form nontoxic insoluble CaC₂O₄ and the strong acid H₂SO₄. When the CaSO₄ supplemented in sawdust medium was more than 25 mmol/kg, the soluble oxalate decreased to less than 1 mmol/kg, and the mycelial growth rate increased by 32% compared with the control. In conclusion, gypsum improved the growth and yield by relieving the toxicity of oxalate and facilitating the acidification of sawdust medium. KEY POINTS: • L. edodes excretes oxalic acid to acidify the ambient environment for growth. • Soluble oxalate is toxic to L. edodes. • Gypsum increases growth by reacting with oxalate to relieve its toxicity.

Organic acid, a virulence factor for pathogenic fungi, causing postharvest decay in fruits

Decay due to fungal infection is a major cause of postharvest losses in fruits. Acidic fungi may enhance their virulence by locally reducing the pH of the host. Several devastating postharvest fungi, such as Penicillium spp., Botrytis cinerea, and Sclerotinia sclerotiorum, can secrete gluconic acid, oxalic acid, or citric acid. Emerging evidence suggests that organic acids secreted by acidic fungi are important virulence factors. In this review, we summarized the research progress on the biosynthesis of organic acids, the role of the pH signalling transcription factor PacC in regulating organic acid, and the action mechanism of the main organic acid secreted via postharvest pathogenic fungi during infection of host tissues. This paper systematically demonstrates the relationships between tissue acidification and postharvest fungal pathogenicity, which will motivate the study of host-pathogen interactions and provide a better understanding of virulence mechanisms of the pathogens so as to design new technical strategies to prevent postharvest diseases.

Enhanced l-Malic Acid Production by Aspergillus oryzae DSM 1863 Using Repeated-Batch Cultivation

l-Malic acid is a C4-dicarboxylic acid and a potential key building block for a bio-based economy. At present, malic acid is synthesized petrochemically and its major market is the food and beverages industry. In future, malic acid might also serve as a building block for biopolymers or even replace the commodity chemical maleic anhydride. For a sustainable production of l-malic acid from renewable resources, the microbial synthesis by the mold Aspergillus oryzae is one possible route. As CO₂ fixation is involved in the biosynthesis, high yields are possible, and at the same time greenhouse gases can be reduced. In order to enhance the production potential of the wild-type strain Aspergillus oryzae DSM 1863, process characteristics were studied in shake flasks, comparing batch, fed-batch, and repeated-batch cultivations. In the batch process, a prolonged cultivation time led to malic acid consumption. Keeping carbon source concentration on a high level by pulsed feeding could prolong cell viability and cultivation time, however, did not result in significant higher product levels. In contrast, continuous malic acid production could be achieved over six exchange cycles and a total fermentation time of 19 days in repeated-batch cultivations. Up to 178 g/L l-malic acid was produced. The maximum productivity (0.90 ± 0.05 g/L/h) achieved in the repeated-batch cultivation had more than doubled than that achieved in the batch process and also the average productivity (0.42 ± 0.03 g/L/h for five exchange cycles and 16 days) was increased considerably. Further repeated-batch experiments confirmed a positive effect of regular calcium carbonate additions on pH stability and malic acid synthesis. Besides calcium carbonate, nitrogen supplementation proved to be essential for the prolonged malic acid production in repeated-batch. As prolonged malic acid production was only observed in cultivations with product removal, product inhibition seems to be the major limiting factor for malic acid production by the wild-type strain. This study provides a systematic comparison of different process strategies under consideration of major influencing factors and thereby delivers important insights into natural l-malic acid production.

Xanthoepocin, a photolabile antibiotic of Penicillium ochrochloron CBS 123823 with high activity against multiresistant gram-positive bacteria

Background

With the steady increase of antibiotic resistance, several strategies have been proposed in the scientific community to overcome the crisis. One of many successful strategies is the re-evaluation of known compounds, which have been early discarded out of the pipeline, with state-of-the-art know-how. Xanthoepocin, a polyketide widespread among the genus Penicillium with an interesting bioactivity spectrum against gram-positive bacteria, is such a discarded antibiotic. The purpose of this work was to (i) isolate larger quantities of this metabolite and chemically re-evaluate it with modern technology, (ii) to explore which factors lead to xanthoepocin biosynthesis in P. ochrochloron, and (iii) to test if it is beside its known activity against methicillin-resistant Staphylococcus aureus (MRSA), also active against linezolid and vancomycin-resistant Enterococcus faecium (LVRE)—a very problematic resistant bacterium which is currently on the rise.

Results

In this work, we developed several new protocols to isolate, extract, and quantify xanthoepocin out of bioreactor batch and petri dish-grown mycelium of P. ochrochloron. The (photo)chemical re-evaluation with state-of-the-art techniques revealed that xanthoepocin is a photolabile molecule, which produces singlet oxygen under blue light irradiation. The intracellular xanthoepocin content, which was highest under ammonium-limited conditions, varied considerably with the applied irradiation conditions in petri dish and bioreactor batch cultures. Using light-protecting measures, we achieved MIC values against gram-positive bacteria, including methicillin-resistant Staphylococcus aureus (MRSA), which were up to 5 times lower than previously published. In addition, xanthoepocin was highly active against a clinical isolate of linezolid and vancomycin-resistant Enterococcus faecium (LVRE).

Conclusions

This interdisciplinary work underlines that the re-evaluation of known compounds with state-of-the-art techniques is an important strategy in the combat against multiresistant bacteria and that light is a crucial factor on many levels that needs to receive more attention. With appropriate light protecting measures in the susceptibility tests, xanthoepocin proved to be a powerful antibiotic against MRSA and LVRE. Exploring the light response of other polyketides may be pivotal for re-introducing previously discarded metabolites into the antibiotic pipeline and to identify photosensitizers which might be used for (antimicrobial) photodynamic therapies.

Supplementary Information

The online version contains supplementary material available at 10.1186/s12934-021-01718-9.

Challenging the charge balance hypothesis: reconsidering buffer effect and reuptake of previously excreted organic acids by Penicillium ochrochloron

Penicillium ochrochloron was used in the past for the leaching of zinc from a zinc oxide containing filter dust via excreted organic acids. Organic acid excretion by P. ochrochloron was stimulated by the addition of an extracellular buffer (2-(N-Morpholino)ethanesulfonic acid, MES; or zinc oxide, ZnO: ZnO + 2 H⁺ → Zn²⁺ + H₂O). It was tested if the buffer stimulated excretion of organic acid anions is due to the necessity of an anion efflux across the plasma membrane to maintain electroneutrality by balancing the excretion of protons by the H⁺-ATPase. This charge balance hypothesis was previously postulated for P. ochrochloron. Two strains of P. ochrochloron were studied, which differed in growth parameters and amount of excreted organic acids. From the results, it was concluded that charge balance at the plasma membrane is not the main reason for organic acid excretion in these two strains of P. ochrochloron. Furthermore, the phenomenon of reuptake of excreted organic acids in the presence of about 100 mM of glucose is confirmed. It is suggested that the equilibrium between extracellular and intracellular organic acid anions may be maintained passively by a facilitated diffusion transporter.

Fungal Growth in Batch Culture - What We Could Benefit If We Start Looking Closer

Since filamentous fungi rapidly adjust their metabolic properties to environmental changes, a rigorous standardization and characterization of cultivation conditions is necessary to obtain meaningful and reproducible results. In batch cultures, which are commonly characterized according to the classical growth curve in textbooks (i.e., lag, exponential, stationary, and declining phase), this is of special difficulty. Although various studies in literature report atypically shaped growth curves of filamentous fungi in batch culture, systematic investigations on this topic are scarce and deviations are barely mentioned in textbooks. Summarizing approximately a decade of observations of growth characteristics from bioreactor batch grown filamentous fungi - in particular two strains (CBS123.823 and CBS123.824) of Penicillium ochrochloron - we demonstrate with a series of highly standardized bioreactor batch culture experiments that the classical growth curve failed to describe growth dynamics of the studied fungi in this work. The nature of the first exhausted nutrient was of remarkable importance for the resulting shape of the growth curve. In all experiments, online respirometry proved to be a powerful tool to distinguish growth phases and revealed more physiological states than expected from the mere biomass curve. In this respect we discuss why "atypical" shaped growth curves often remain unrecognized and that they might be the rule rather than the exception. Acknowledging the importance of the correct presentation of this complex topic in textbooks, we also propose a modified growth curve scheme to sensitize students for potential alternative shaped growth curves.

Critical evaluation of a putative glucosamine excretion by Aspergillus niger CBS120.49 and Penicillium ochrochloron CBS123.824 under citric acid producing conditions

As one of the most frequently occurring monomers in the biosphere, glucosamine is a valuable metabolite for several applications. Although microbial glucosamine production is still in its infancy, it offers the possibility to circumvent problems associated with traditional production by hydrolysis. Of particular interest is a study with Aspergillus niger, which reports for the first time high glucosamine excretion in the early phase of citric acid production. These results have relevance for both the commercial glucosamine production and deeper insight into the regulation of organic acid excretion in fungi. To investigate glucosamine excretion, we performed bioreactor batch cultivations with Penicillium ochrochloron CBS123.824 and A. niger CBS120.49 using cultivation conditions which are known to trigger the production of citric acid. Glucosamine detection in culture filtrates was achieved by two photometric methods, High performance liquid chromatography with evaporative light scattering detection (HPLC-ELSD) and HPLC with mass spectrometry detection (HPLC-MS). Surprisingly, we detected no glucosamine at all. Based on a critical review of published data for A. niger, we conclude that the reported high levels of excreted glucosamine might be an experimental artifact. However, growth experiments with glucosamine as a combined or single source for carbon or nitrogen showed that both organisms are in principle able to transport glucosamine across their plasma membrane, which is a prerequisite for the excretion of glucosamine.

Continuous in vivo Metabolism by NMR

Dense time-series metabolomics data are essential for unraveling the underlying dynamic properties of metabolism. Here we extend high-resolution-magic angle spinning (HR-MAS) to enable continuous in vivo monitoring of metabolism by NMR (CIVM-NMR) and provide analysis tools for these data. First, we reproduced a result in human chronic lymphoid leukemia cells by using isotope-edited CIVM-NMR to rapidly and unambiguously demonstrate unidirectional flux in branched-chain amino acid metabolism. We then collected untargeted CIVM-NMR datasets for Neurospora crassa, a classic multicellular model organism, and uncovered dynamics between central carbon metabolism, amino acid metabolism, energy storage molecules, and lipid and cell wall precursors. Virtually no sample preparation was required to yield a dynamic metabolic fingerprint over hours to days at ~4-min temporal resolution with little noise. CIVM-NMR is simple and readily adapted to different types of cells and microorganisms, offering an experimental complement to kinetic models of metabolism for diverse biological systems.

World market and biotechnological production of itaconic acid

The itaconic acid (IA) world market is expected to exceed 216 million of dollars by 2020 as a result of an increasing demand for bio-based chemicals. The potential of this organic acid produced by fermentation mainly with filamentous fungi relies on the vast industrial applications of polymers derived from it. The applications may be as a superabsorbent polymer for personal care or agriculture, unsaturated polyester resin for the transportation industry, poly(methyl methacrylate) for electronic devices, among many others. However, the existence of other substitutes and the high production cost limit the current IA market. IA manufacturing is done mainly in China and other Asia-Pacific countries. Higher economic feasibility and production worldwide may be achieved with the use of low-cost feedstock of local origin and with the development of applications targeted to specific local markets. Moreover, research on the biological pathway for IA synthesis and the effect of medium composition are important for amplifying the knowledge about the production of that biochemical with great market potential.

The Dynamics of Plasma Membrane, Metabolism and Respiration (PM-M-R) in Penicillium ochrochloron CBS 123824 in Response to Different Nutrient Limitations-A Multi-level Approach to Study Organic Acid Excretion in Filamentous Fungi

Filamentous fungi are important cell factories. In contrast, we do not understand well even basic physiological behavior in these organisms. This includes the widespread phenomenon of organic acid excretion. One strong hurdle to fully exploit the metabolic capacity of these organisms is the enormous, highly environment sensitive phenotypic plasticity. In this work we explored organic acid excretion in Penicillium ochrochloron from a new point of view by simultaneously investigating three essential metabolic levels: the plasma membrane H+-ATPase (PM); energy metabolism, in particular adenine and pyridine nucleotides (M); and respiration, in particular the alternative oxidase (R). This was done in strictly standardized chemostat culture with different nutrient limitations (glucose, ammonium, nitrate, and phosphate). These different nutrient limitations led to various quantitative phenotypes (as represented by organic acid excretion, oxygen consumption, glucose consumption, and biomass formation). Glucose-limited grown mycelia were used as the reference point (very low organic acid excretion). Both ammonium and phosphate grown mycelia showed increased organic acid excretion, although the patterns of excreted acids were different. In ammonium-limited grown mycelia amount and activity of the plasma membrane H+-ATPase was increased, nucleotide concentrations were decreased, energy charge (EC) and catabolic reduction charge (CRC) were unchanged and alternative respiration was present but not quantifiable. In phosphate-limited grown mycelia (no data on the H+-ATPase) nucleotide concentrations were still lower, EC was slightly decreased, CRC was distinctly decreased and alternative respiration was present and quantifiable. Main conclusions are: (i) the phenotypic plasticity of filamentous fungi demands adaptation of sample preparation and analytical methods at the phenotype level; (ii) each nutrient condition is unique and its metabolic situation must be considered separately; (iii) organic acid excretion is inversely related to nucleotide concentration (but not EC); (iv) excretion of organic acids is the outcome of a simultaneous adjustment of several metabolic levels to nutrient conditions.

Aspergillus niger Secretes Citrate to Increase Iron Bioavailability

Aspergillus niger has an innate ability to secrete various organic acids, including citrate. The conditions required for A. niger citrate overproduction are well described, but the physiological reasons underlying extracellular citrate accumulation are not yet fully understood. One of the less understood culture conditions is the requirement of growth-limiting iron concentrations. While this has been attributed to iron-dependent citrate metabolizing enzymes, this straightforward relationship does not always hold true. Here, we show that an increase in citrate secretion under iron limited conditions is a physiological response consistent with a role of citrate as A. niger iron siderophore. We found that A. niger citrate secretion increases with decreasing amounts of iron added to the culture medium and, in contrast to previous findings, this response is independent of the nitrogen source. Differential transcriptomics analyses of the two A. niger mutants NW305 (gluconate non-producer) and NW186 (gluconate and oxalate non-producer) revealed up-regulation of the citrate biosynthesis gene citA under iron limited conditions compared to iron replete conditions. In addition, we show that A. niger can utilize Fe(III) citrate as iron source. Finally, we discuss our findings in the general context of the pH-dependency of A. niger organic acid production, offering an explanation, besides competition, for why A. niger organic acid production is a sequential process influenced by the external pH of the culture medium.

Rapid sample processing for intracellular metabolite studies in Penicillium ochrochloron CBS 123.824: the FiltRes-device combines cold filtration of methanol quenched biomass with resuspension in extraction solution

Background

Many issues concerning sample processing for intracellular metabolite studies in filamentous fungi still need to be solved, e.g. how to reduce the contact time of the biomass to the quenching solution in order to minimize metabolite leakage. Since the required time to separate the biomass from the quenching solution determines the contact time, speeding up this step is thus of utmost interest. Recently, separation approaches based on cold-filtration were introduced as promising alternative to cold-centrifugation, which exhibit considerably reduced contact times. In previous works we were unable to obtain a compact pellet from cold methanol quenched samples of the filamentous fungus Penicillium ochrochloron CBS 123.824 via centrifugation. Therefore our aim was to establish for this organism a separation technique based on cold-filtration to determine intracellular levels of a selected set of nucleotides.

Results

We developed a cold-filtration based technique as part of our effort to revise the entire sample processing method and analytical procedure. The Filtration-Resuspension (FiltRes) device combined in a single apparatus (1) a rapid cold-filtration and (2) a rapid resuspension of the biomass in hot extraction solution. Unique to this is the injection of the extraction solution from below the membrane filter (FiltRes-principle). This caused the mycelial cake to detach completely from the filter membrane and to float upwards so that the biomass could easily be transferred into preheated tubes for metabolite extraction. The total contact time of glucose-limited chemostat mycelium to the quenching solution could be reduced to 15.7 ± 2.5 s, whereby each washing step added another 10–15 s. We evaluated critical steps like filtration time, temperature profile, reproducibility of results, and using the energy charge (EC) as a criterion, effectiveness of enzyme destruction during the transition in sample temperature from cold to hot. As control we used total broth samples quenched in hot ethanol. Averaged over all samples an EC of 0.93 ± 0.020 was determined with the FiltRes-principle compared to 0.89 ± 0.049 with heat stopped total broth samples.

Conclusions

We concluded that for P. ochrochloron this technique is a reliable sample processing method for intracellular metabolite analysis, which might offer also other possible applications.

Electronic supplementary material

The online version of this article (doi:10.1186/s40064-016-2649-8) contains supplementary material, which is available to authorized users.