A Rapid Antimicrobial Susceptibility Test for Determining Yersinia pestis Susceptibility to Doxycycline by RT-PCR Quantification of RNA Markers

Rapid Phenotypic Antibiotics Susceptibility Analysis by a 3D Printed Prototype

One of the most important public health concerns is the increase in antibiotic-resistant pathogens and corresponding treatment of associated infections. Addressing this challenge requires more efficient use of antibiotics, achievable by the use of evidence-based, effective antibiotics identified by antibiotic susceptibility testing (AST). However, the current standard method of phenotypic AST used for this purpose requires 48 h or more from sample collection to result. Until results are available, broad-spectrum antibiotics are used to avoid delaying treatment. The turnaround time must therefore be shortened in order for the results to be available before the second administration of antibiotics. The phenotypic electrochemical AST method presented here identifies effective antibiotics within 5-10 h after sampling. Spiked serum samples, including polymicrobial samples, with clinically relevant pathogens and respective concentrations commonly found in bloodstream infections (Escherichia coli, Staphylococcus aureus, Klebsiella pneumoniae, and Pseudomonas aeruginosa) are used. Direct loading of the test with diluted serum eliminates the need for a pre-culture, as required by existing methods. Furthermore, by combining several electrochemical measurement procedures with computational analysis, allowing the method to be used both online and offline, the AST achieves a sensitivity of 94.44% and a specificity of 95.83% considering each replicate individually.

Relative quantification of the recA gene for antimicrobial susceptibility testing in response to ciprofloxacin for pathogens of concern

Antimicrobial resistance (AR) is one of the greatest threats to global health and is associated with higher treatment costs, longer hospital stays, and increased mortality. Current gold standard antimicrobial susceptibility tests (AST) rely on organism growth rates that result in prolonged time-to-answer for slow growing organisms. Changes in the cellular transcriptome can be rapid in the presence of stressors such as antibiotic pressure, providing the opportunity to develop AST towards transcriptomic signatures. Here, we show that relative quantification of the recA gene is an indicator of pathogen susceptibly when select species are challenged with relevant concentrations of ciprofloxacin. We demonstrate that ciprofloxacin susceptible strains of Y. pestis and B. anthracis have significant increases in relative recA gene expression after 15 min of exposure while resistant strains show no significant differences. Building upon this data, we designed and optimized seven duplex RT-qPCR assays targeting the recA and 16S rRNA gene, response and housekeeping genes, respectively, for multiple biothreat and ESKAPE pathogens. Final evaluation of all seven duplex assays tested against 124 ciprofloxacin susceptible and resistant strains, including Tier 1 pathogens, demonstrated an overall categorical agreement compared to microbroth dilution of 97% using a defined cutoff. Testing pathogen strains commonly associated with urinary tract infections in contrived mock sample sets demonstrated an overall categorical agreement of 96%. These data indicate relative quantification of a single highly conserved gene accurately determines susceptibility for multiple bacterial species in response to ciprofloxacin.

Global transcriptomic analysis of Francisella tularensis SchuS4 differentially expressed genes in response to doxycycline or ciprofloxacin exposure

OBJECTIVE

As part of a research aiming at presenting an alternative approach for rapid determination of antimicrobial susceptibility by quantification of changes in expression levels of specific marker genes and gene sets, cultures of the virulent bacterial strain Francisella tularensis SchuS4 were grown in the presence of inhibitory/sub-inhibitory concentrations of either ciprofloxacin or doxycycline and their transcriptomic profiles were elucidated using differential expression analysis followed by functional annotation.

DATA DESCRIPTION

RNA sequencing was performed to identify differentially expressed genes (DEGs) in response to exposure of F. tularensis SchuS4 to either ciprofloxacin or doxycycline, the antibiotics of choice for Tularemia therapy. Accordingly, RNA samples were collected 2 h post antibiotic exposure and subjected to RNA sequence analysis. Transcriptomic quantification of RNA representing duplicated samples generated highly similar gene expression data. Exposure to sub-inhibitory concentration [0.5 x MIC (minimal inhibitory concentration)] of doxycycline or ciprofloxacin modulated the expression of 237 or 8 genes, respectively, while exposure to an inhibitory concentration (1 x MIC) resulted in the modulation of 583 or 234 genes, respectively. Amongst the genes modulated upon doxycycline exposure upregulation of 31 genes encoding for translation-functions could be distinguished, as well as downregulation of 14 genes encoding for functions involved in DNA transcription and repair. Ciprofloxacin exposure impacted differently the RNA sequence profile of the pathogen, resulting in upregulation of 27 genes encoding mainly DNA replication and repair functions, transmembrane transporters and molecular chaperons. In addition, 15 downregulated genes were involved in translation processes.

Antimicrobial Susceptibility Testing: A Comprehensive Review of Currently Used Methods

Antimicrobial resistance (AMR) has emerged as a major threat to public health globally. Accurate and rapid detection of resistance to antimicrobial drugs, and subsequent appropriate antimicrobial treatment, combined with antimicrobial stewardship, are essential for controlling the emergence and spread of AMR. This article reviews common antimicrobial susceptibility testing (AST) methods and relevant issues concerning the advantages and disadvantages of each method. Although accurate, classic technologies used in clinical microbiology to profile antimicrobial susceptibility are time-consuming and relatively expensive. As a result, physicians often prescribe empirical antimicrobial therapies and broad-spectrum antibiotics. Although recently developed AST systems have shown advantages over traditional methods in terms of testing speed and the potential for providing a deeper insight into resistance mechanisms, extensive validation is required to translate these methodologies to clinical practice. With a continuous increase in antimicrobial resistance, additional efforts are needed to develop innovative, rapid, accurate, and portable diagnostic tools for AST. The wide implementation of novel devices would enable the identification of the optimal treatment approaches and the surveillance of antibiotic resistance in health, agriculture, and the environment, allowing monitoring and better tackling the emergence of AMR.

Beating the Bio-Terror Threat with Rapid Antimicrobial Susceptibility Testing

A bioterror event using an infectious bacterium may lead to catastrophic outcomes involving morbidity and mortality as well as social and psychological stress. Moreover, a bioterror event using an antibiotic resistance engineered bacterial agent may raise additional concerns. Thus, preparedness is essential to preclude and control the dissemination of the bacterial agent as well as to appropriately and promptly treat potentially exposed individuals or patients. Rates of morbidity, death, and social anxiety can be drastically reduced if the rapid delivery of antimicrobial agents for post-exposure prophylaxis and treatment is initiated as soon as possible. Availability of rapid antibiotic susceptibility tests that may provide key recommendations to targeted antibiotic treatment is mandatory, yet, such tests are only at the development stage. In this review, we describe the recently published rapid antibiotic susceptibility tests implemented on bioterror bacterial agents and discuss their assimilation in clinical and environmental samples.

Rapid Antibiotic Susceptibility Testing of Tier-1 Agents Bacillus anthracis, Yersinia pestis, and Francisella tularensis Directly From Whole Blood Samples

Rapid antibiotic susceptibility tests, performed directly on whole blood samples, will offer great clinical advantages. This issue is of considerable importance when it comes to bioterror pathogens where prompt antibiotic treatment should be offered to infected patients as well as prophylaxis to suspected exposed individuals. Herein, we describe a novel and rapid method, named MAPt, that is based on the direct application of a blood sample onto solid agar that has been embedded with different concentrations of the tested antibiotic. Following a short incubation, bacterial growth is monitored by qPCR. The method was applied on blood cultures and whole blood samples inoculated with the Tier-1 pathogens Bacillus anthracis, Yersinia pestis, and Francisella tularensis. The use of agar medium, which better supports the growth of bacteria at low concentrations, together with the use of qPCR, which provides sensitivity and specificity, allowed minimal inhibitory concentration (MIC) determination to a wide range of bacterial concentrations, ranging from ∼5 × 102 cfu/ml up to 108 cfu/ml. The omission of the enrichment procedure in blood culture and the isolation step, both required in standard antibiotic susceptibility tests (ASTs), allowed a dramatic reduction in time to answer, from a few days to a few hours. The total time required for MIC determination was ∼6 h for fast-growing bacteria, such as B. anthracis, and 12-16 h for slow-growing bacteria, represented by Y. pestis and F. tularensis. Accordingly, MAPt may offer health authorities means for public preparedness in the case of a bioterror attack as well as prompt clinical treatment options in common blood stream infections.

RNA markers for ultra-rapid molecular antimicrobial susceptibility testing in fluoroquinolone-treated Klebsiella pneumoniae

OBJECTIVES

Traditional antimicrobial susceptibility testing (AST) is growth dependent and time-consuming. With rising rates of drug-resistant infections, a novel diagnostic method is critically needed that can rapidly reveal a pathogen's antimicrobial susceptibility to guide appropriate treatment. Recently, RNA sequencing has been identified as a powerful diagnostic tool to explore transcriptional gene expression and improve AST.

METHODS

RNA sequencing was used to investigate the potential of RNA markers for rapid molecular AST using Klebsiella pneumoniae and ciprofloxacin as a model. Downstream bioinformatic analysis was applied for optimal marker selection. Further validation on 11 more isolates of K. pneumoniae was performed using quantitative real-time PCR.

RESULTS

From RNA sequencing, we identified RNA signatures that were induced or suppressed following exposure to ciprofloxacin. Significant shifts at the transcript level were observed as early as 10 min after antibiotic exposure. Lastly, we confirmed marker expression profiles with concordant MIC results from traditional culture-based AST and validated across 11 K. pneumoniae isolates. recA, coaA and metN transcripts harbour the most sensitive susceptibility information and were selected as our top markers.

CONCLUSIONS

Our results suggest that RNA signature is a promising approach to AST development, resulting in faster clinical diagnosis and treatment of infectious disease. This approach is potentially applicable in other models including other pathogens exposed to different classes of antibiotics.

Reporter-Phage-Based Detection and Antibiotic Susceptibility Testing of Yersinia pestis for a Rapid Plague Outbreak Response

Pneumonic plague is a lethal infectious disease caused by Yersinia pestis, a Tier-1 biothreat agent. Antibiotic treatment can save infected patients; however, therapy should begin within 24 h of symptom onset. As some Y. pestis strains showed an antibiotic resistance phenotype, an antibiotic susceptibility test (AST) must be performed. Performing the Clinical and Laboratory Standards Institute (CLSI)-recommended standard process, which includes bacterial isolation, enumeration and microdilution testing, lasts several days. Thus, rapid AST must be developed. As previously published, the Y. pestis-specific reporter phage ϕA1122::luxAB can serve for rapid identification and AST (ID-AST). Herein, we demonstrate the ability to use ϕA1122::luxAB to determine minimal inhibitory concentration (MIC) values and antibiotic susceptibility categories for various Y. pestis therapeutic antibiotics. We confirmed the assay by testing several nonvirulent Y. pestis isolates with reduced susceptibility to doxycycline or ciprofloxacin. Moreover, the assay can be performed directly on positive human blood cultures. Furthermore, as Y. pestis may naturally or deliberately be spread in the environment, we demonstrate the compatibility of this direct method for this scenario. This direct phage-based ID-AST shortens the time needed for standard AST to less than a day, enabling rapid and correct treatment, which may also prevent the spread of the disease.

Evaluation of the European Committee on Antimicrobial Susceptibility Testing Guidelines for Rapid Antimicrobial Susceptibility Testing of Bacillus anthracis-, Yersinia pestis- and Francisella tularensis-Positive Blood Cultures

Rapid determination of bacterial antibiotic susceptibility is important for proper treatment of infections. The European Committee on Antimicrobial Susceptibility Testing (EUCAST) has recently published guidelines for rapid antimicrobial susceptibility testing (RAST) performed directly from positive blood culture vials. These guidelines, however, were only published for a limited number of common pathogenic bacteria. In this study, we evaluated the applicability of these guidelines to three Tier 1 bioterror agents (Bacillus anthracis, Yersinia pestis and Francisella tularensis) that require prompt antibiotic treatment to mitigate morbidity and mortality. We used spiked-in human blood incubated in a BACTEC™ FX40 system to determine the proper conditions for RAST using disc-diffusion and Etest assays. We found that reliable disc-diffusion inhibition diameters and Etest MIC values could be obtained in remarkably short times. Compared to the EUCAST-recommended disc-diffusion assays that will require adjusted clinical breakpoint tables, Etest-based RAST was advantageous, as the obtained MIC values were similar to the standard MIC values, enabling the use of established category breakpoint tables. Our results demonstrate the promising applicability of the EUCAST RAST for B. anthracis-, Y. pestis- or F. tularensis-positive blood cultures, which can lead to shorter diagnostics and prompt antibiotic treatment of these dangerous pathogens.

Rapid Antimicrobial Susceptibility Testing on Clinical Urine Samples by Video-Based Object Scattering Intensity Detection

To combat the ongoing public health threat of antibiotic-resistant infections, a technology that can quickly identify infecting bacterial pathogens and concurrently perform antimicrobial susceptibility testing (AST) in point-of-care settings is needed. Here, we develop a technology for point-of-care AST with a low-magnification solution scattering imaging system and a real-time video-based object scattering intensity detection method. The low magnification (1-2×) optics provides sufficient volume for direct imaging of bacteria in urine samples, avoiding the time-consuming process of culture-based bacterial isolation and enrichment. Scattering intensity from moving bacteria and particles in the sample is obtained by subtracting both spatial and temporal background from a short video. The time profile of scattering intensity is correlated with the bacterial growth rate and bacterial response to antibiotic exposure. Compared to the image-based bacterial tracking and counting method we previously developed, this simple image processing algorithm accommodates a wider range of bacterial concentrations, simplifies sample preparation, and greatly reduces the computational cost of signal processing. Furthermore, development of this simplified processing algorithm eases implementation of multiplexed detection and allows real-time signal readout, which are essential for point-of-care AST applications. To establish the method, 130 clinical urine samples were tested, and the results demonstrated an accuracy of ∼92% within 60-90 min for UTI diagnosis. Rapid AST of 55 positive clinical samples revealed 98% categorical agreement with both the clinical culture results and the on-site parallel AST validation results. This technology provides opportunities for prompt infection diagnosis and accurate antibiotic prescriptions in point-of-care settings.

A novel concentration gradient microfluidic chip for high-throughput antibiotic susceptibility testing of bacteria

Antibiotic resistance has become a serious threat to food safety and public health globally. Therefore, the development of a sensitive, quick, and simple method for antibiotic susceptibility testing is an urgent and crucial need. A novel concentration gradient microfluidic chip was designed in this work to generate antibiotic concentration gradient, culture bacteria, and produce fluorescence emission. An in-house-assembled fluorescence detection platform was constructed, and experiments were conducted to verify the linearity of the generated concentration gradient, explore the appropriate incubation time and flow rate for the microfluidic chip, and study the effect of long-term acid-based food processing on antibiotic susceptibility testing. Experimental results show that the concentration gradient generated by the microfluidic chip exhibited good linearity, stability, and controllability. The appropriate flow rate and incubation time for the microfluidic chip were 2 μL/min and 5 h, respectively. The use of this microfluidic chip for testing antibiotic resistance of Salmonella to ofloxacin and ampicillin generated results that were completely consistent with test results obtained using the gold-standard method. Furthermore, Salmonella showed greater sensitivity to antibiotics under strong acid conditions, confirming the potential influence of acid-based food processing on antibiotic susceptibility testing of real samples. The designed microfluidic chip provides a high-throughput, sensitive, and rapid antibiotic susceptibility testing method that combines the microfluidic chip and the fluorescence detection platform. The application of this method would facilitate determination of antibiotic-resistant bacterial strains for clinicians and researchers, and enable monitoring of changes in bacterial resistance during food processing.

Screening of an FDA-Approved Library for Novel Drugs against Y. pestis

Yersinia pestis is a Gram-negative pathogen that causes plague, a devastating disease that kills millions worldwide. Although plague is efficiently treatable by recommended antibiotics, the time of antibiotic therapy initiation is critical, as high mortality rates have been observed if treatment is delayed for longer than 24 h after symptom onset. To overcome the emergence of antibiotic resistant strains, we attempted a systematic screening of Food and Drug Administration (FDA)-approved drugs to identify alternative compounds which may possess antibacterial activity against Y. pestis. Here, we describe a drug-repurposing approach, which led to the identification of two antibiotic-like activities of the anticancer drugs bleomycin sulfate and streptozocin that have the potential for designing novel antiplague therapy approaches. The inhibitory characteristics of these two drugs were further addressed as well as their efficiency in affecting the growth of Y. pestis strains resistant to doxycycline and ciprofloxacin, antibiotics recommended for plague treatment.

Direct Antimicrobial Susceptibility Testing on Clinical Urine Samples by Optical Tracking of Single Cell Division Events

With the increasing prevalence of antibiotic resistance, the need to develop antimicrobial susceptibility testing (AST) technologies is urgent. The current challenge has been to perform the antibiotic susceptibility testing in short time, directly with clinical samples, and with antibiotics over a broad dynamic range of clinically relevant concentrations. Here, a technology for point-of-care diagnosis of antimicrobial-resistant bacteria in urinary tract infections, by imaging the clinical urine samples directly with an innovative large volume solution scattering imaging (LVSi) system and analyzing the image sequences with a single-cell division tracking method is developed. The high sensitivity of single-cell division tracking associated with large volume imaging enables rapid antibiotic susceptibility testing directly on the clinical urine samples. The results demonstrate direct detection of bacterial infections in 60 clinical urine samples with a 60 min LVSi video, and digital AST of 30 positive clinical samples with 100% categorical agreement with both the clinical culture results and the on-site agar plating validation results. This technology provides opportunities for precise antibiotic prescription and proper treatment of the patient within a single clinic visit.

MAPt: A Rapid Antibiotic Susceptibility Testing for Bacteria in Environmental Samples as a Means for Bioterror Preparedness

Antibiotic resistance of bio-threat agents holds major concerns especially in light of advances in methods for engineering pathogens with antibiotic resistance. Preparedness means for rapid identification and prompt proper medical treatment are of need to contain the event and prevent morbidity and spreading of the disease by properly treating exposed individuals before symptoms appearance. Herein, we describe a novel, rapid, simple, specific, and sensitive method named Micro-Agar-PCR-test (MAPt), which determines antibiotic susceptibility of bio-terror pathogens, directly from environmental samples, with no need for any prior isolation, quantification, or enrichment steps. As proof of concept, we have used this approach to obtain correct therapeutic antibiotic minimal inhibitory concentration (MIC) values for the Tier-1 select agents, Bacillus anthracis, Yersinia pestis, and Francisella tularensis, spiked in various environmental samples recapitulating potential bioterror scenarios. The method demonstrated efficiency for a broad dynamic range of bacterial concentrations, both for fast-growing as well as slow-growing bacteria and most importantly significantly shortening the time for accurate results from days to a few hours. The MAPt allows us to address bioterror agents-contaminated environmental samples, offering rational targeted prophylactic treatment, before the onset of morbidity in exposed individuals. Hence, MAPt is expected to provide data for decision-making personal for treatment regimens before the onset of symptoms in infected individuals.