Genetic Transformation of the Filamentous Fungus Pseudogymnoascus verrucosus of Antarctic Origin

Establishment of a genetic transformation system for cordycipitoid fungus Cordyceps chanhua

Cordyceps chanhua is a well-known edible and medicinal mushroom with a long history of use in China, and it contains a variety of secondary metabolites with interesting bioactive ingredients. However, recent researches have mainly focused on cultivation conditions, secondary metabolite compositions and pharmacological activities of C. chanhua, the lack of an efficient and stable genetic transformation system has largely limited further research on the relationship between secondary metabolites and biosynthetic gene clusters in C. chanhua. In this study, single-factor experiments were used to compare the effects of different osmotic stabilizers, enzyme concentrations and enzyme digestion times on protoplast yield, and we found that the highest yield of 5.53 × 108 protoplasts/mL was obtained with 0.7 M mannitol, 6 mg/mL snail enzyme and 4 h of enzyme digestion time, and the regeneration rate of protoplasts was up to approximately 30% using 0.7 M mannitol as an osmotic stabilizer. On this basis, a PEG-mediated genetic transformation system of C. chanhua was successfully established for the first time, which lays the foundation for further genetic transformation of C. chanhua.

Improved Protoplast Production Protocol for Fungal Transformations Mediated by CRISPR/Cas9 in Botrytis cinerea Non-Sporulating Isolates

Botrytis cinerea is a necrotrophic fungus that causes considerable economic losses in commercial crops. Fungi of the genus Botrytis exhibit great morphological and genetic variability, ranging from non-sporogenic and non-infective isolates to highly virulent sporogenic ones. There is growing interest in the different isolates in terms of their methodological applications aimed at gaining a deeper understanding of the biology of these fungal species for more efficient control of the infections they cause. This article describes an improvement in the protoplast production protocol from non-sporogenic isolates, resulting in viable protoplasts with regenerating capacity. The method improvements consist of a two-day incubation period with mycelium plugs and orbital shaking. Special mention is made of our preference for the VinoTaste Pro enzyme in the KC buffer as a replacement for Glucanex, as it enhances the efficacy of protoplast isolation in B459 and B371 isolates. The methodology described here has proven to be very useful for biotechnological applications such as genetic transformations mediated by the CRISPR/Cas9 tool.

Expanding the Toolbox for Genetic Manipulation in Pseudogymnoascus: RNAi-Mediated Silencing and CRISPR/Cas9-Mediated Disruption of a Polyketide Synthase Gene Involved in Red Pigment Production in P. verrucosus

Fungi belonging to the genus Pseudogymnoascus have garnered increasing attention in recent years. One of the members of the genus, P. destructans, has been identified as the causal agent of a severe bat disease. Simultaneously, the knowledge of Pseudogymnoascus species has expanded, in parallel with the increased availability of genome sequences. Moreover, Pseudogymnoascus exhibits great potential as a producer of specialized metabolites, displaying a diverse array of biological activities. Despite these significant advancements, the genetic landscape of Pseudogymnoascus remains largely unexplored due to the scarcity of suitable molecular tools for genetic manipulation. In this study, we successfully implemented RNAi-mediated gene silencing and CRISPR/Cas9-mediated disruption in Pseudogymnoascus, using an Antarctic strain of Pseudogymnoascus verrucosus as a model. Both methods were applied to target azpA, a gene involved in red pigment biosynthesis. Silencing of the azpA gene to levels of 90% or higher eliminated red pigment production, resulting in transformants exhibiting a white phenotype. On the other hand, the CRISPR/Cas9 system led to a high percentage (73%) of transformants with a one-nucleotide insertion, thereby inactivating azpA and abolishing red pigment production, resulting in a white phenotype. The successful application of RNAi-mediated gene silencing and CRISPR/Cas9-mediated disruption represents a significant advancement in Pseudogymnoascus research, opening avenues for comprehensive functional genetic investigations within this underexplored fungal genus.

Communities of culturable freshwater fungi present in Antarctic lakes and detection of their low-temperature-active enzymes

We evaluated the diversity and enzymatic activities of culturable fungi recovered from cotton baits submerged for 2 years in Hennequin Lake, King George Island, and from benthic biofilms in Kroner Lake, Deception Island, South Shetland Islands, maritime Antarctica. A total of 154 fungal isolates were obtained, representing in rank abundance the phyla Ascomycota, Basidiomycota and Mortierellomycota. Thelebolus globosus, Goffeauzyma sp., Pseudogymnoascus verrucosus and Metschnikowia australis were the most abundant taxa. The fungal community obtained from the biofilm was more diverse and richer than that recovered from the cotton baits. However, diversity indices suggested that the lakes may harbour further fungal diversity. The capabilities of all cultured fungi to produce the extracellular enzymes cellulase, protease, lipase, agarase, carrageenase, invertase, amylase, esterase, pectinase, inulinase and gelatinase at low temperature were evaluated. All enzymes were detected, but the most widely produced were protease and pectinase. The best enzymatic indices were obtained from Holtermanniella wattica (for invertase, esterase), Goffeauzyma sp. (amylase), Metschnikowia australis (protease), Mrakia blollopis (cellulase, pectinase), Pseudogymnoascus verrucosus (agarase, carrageenase) and Leucosporidium fragarium (inulinase). The detection of multiple enzymes reinforces the ecological role of fungi in nutrient cycling in Antarctic lakes, making nutrients available to the complex aquatic food web. Furthermore, such low-temperature-active enzymes may find application in different biotechnological processes, such as in the textile, pharmaceutical, food, detergent and paper industries, as well as environmental application in pollutant bioremediation processes.

Strategies for the Development of Industrial Fungal Producing Strains

The use of microorganisms in industry has enabled the (over)production of various compounds (e.g., primary and secondary metabolites, proteins and enzymes) that are relevant for the production of antibiotics, food, beverages, cosmetics, chemicals and biofuels, among others. Industrial strains are commonly obtained by conventional (non-GMO) strain improvement strategies and random screening and selection. However, recombinant DNA technology has made it possible to improve microbial strains by adding, deleting or modifying specific genes. Techniques such as genetic engineering and genome editing are contributing to the development of industrial production strains. Nevertheless, there is still significant room for further strain improvement. In this review, we will focus on classical and recent methods, tools and technologies used for the development of fungal production strains with the potential to be applied at an industrial scale. Additionally, the use of functional genomics, transcriptomics, proteomics and metabolomics together with the implementation of genetic manipulation techniques and expression tools will be discussed.

Development of Cordyceps javanica BE01 with enhanced virulence against Hyphantria cunea using polyethylene glycol-mediated protoplast transformation

Cordyceps javanica has promising application prospects as an entomopathogenic fungus with a wide range of hosts. To enhance the virulence of C. javanica, a polyethylene glycol (PEG)-mediated protoplast genetic transformation system was constructed. Strains overexpressing the subtilisin-like protease genes CJPRB and CJPRB1 and the tripeptidyl peptidase gene CJCLN2-1 were constructed with this system, and the effects of these strains on Hyphantria cunea were tested. The aminoglycoside G418 was used at 800 μg ml⁻¹ to screen the transformants. C. javanica hyphae were degraded with an enzyme mixture to obtain protoplasts at 1.31 × 10⁷ protoplasts ml⁻¹. The transformation of 2 μg of DNA into 1,000 protoplasts was achieved with 20% PEG2000, and after 6 h of recovery, the transformation efficiency was 12.33 ± 1.42 transformants μg⁻¹ plasmid. The LT₅₀ values of CJPRB, CJPRB1, and CJCLN2-1-overexpressing C. javanica strains were 1.32-fold, 2.21-fold, and 2.14-fold higher than that of the wild-type (WT) strain, respectively. The three overexpression strains showed no significant differences from the WT strain in terms of colony growth, conidial yield, and conidial germination rate. However, the infection rate of the CJPRB1 strain was faster than that of the WT strain, with infection occurring within 4–5 days. The CJCLN2-1 strain had a significantly higher mortality rate than the WT strain within 4–10 days after infection. A C. javanica genetic transformation system was successfully constructed for the first time, and an overexpression strain exhibited enhanced virulence to H. cunea compared with the WT strain.

A highly efficient stratagem for protoplast isolation and genetic transformation in filamentous fungus Colletotrichum falcatum

Red rot of sugarcane caused by the hemi-biotrophic fungal pathogen, Colletotrichum falcatum, is a major threat to sugarcane cultivation in many tropical countries such as India, Bangladesh, and Pakistan. With the accumulating information on pathogenicity determinants, namely, effectors and pathogen-associated molecular patterns (PAMPs) of C. falcatum, it is of paramount importance to decipher the functional role of these molecular players that may ultimately decide upon the outcome of sugarcane-C. falcatum interaction. Since C. falcatum is a multinucleated filamentous fungus, the conventional Agrobacterium-mediated transformation method could not be effectively utilized for targeted manipulation of genomic DNA. Hence, we developed a highly efficient protoplast-based transformation method for the virulent pathotype of C. falcatum - Cf671, which involves isolation of protoplast, polyethylene glycol (PEG)-mediated transformation, and regeneration of transformed protoplasts into hyphal colonies. In this study, germinating conidiospores of Cf671 were treated with different enzyme-osmoticum combinations, out of which 20 mg/mL lysing enzyme with 5 mg/mL β-glucanase in an osmoticum of 1.2 mol/L MgSO₄ yielded maximum number of viable protoplasts. The resultant protoplasts were transformed with pAsp shuttle vector. Transformed protoplasts were regenerated into hyphal colonies under hygromycin selection and observed for GFP fluorescence. This protocol resulted in a transformation efficiency of > 130 transformants per μg of plasmid DNA. This method of transformation is rapid, simple, and more efficient for gene knockout, site-directed mutagenesis, ectopic expression, and other genetic functional characterization experiments in C. falcatum, even with large vectors (> 10 kb) and can also be applied for other filamentous fungi.

Transposon insertion mutation of Antarctic psychrotrophic fungus for red pigment production adaptive to normal temperature

Polar regions are rich in microbial and product resources. Geomyces sp. WNF-15A is an Antarctic psy chrotrophic filamentous fungus producing high quality red pigment with potential for industrial use. However, efficient biosynthesis of red pigment can only realize at low temperature, which brings difficult control and high cost for the large-scale fermentation. This study aims to develop transposon insertion mutation method to improve cell growth and red pigment production adaptive to normal temperature. Genetic manipulation system of this fungus was firstly developed by antibiotic marker screening, protoplast preparation and transformation optimization, by which transformation efficiency of ∼50% was finally achieved. Then transposable insertion systems were established using Helitron, Fot1, and Impala transposons. The transposition efficiency reached 11.9%, 9.4%, and 4.6%, respectively. Mutant MP1 achieved the highest red pigment production (OD520 of 39) at 14°C, which was 40% higher than the wild-type strain. Mutant MP14 reached a maximum red pigment production (OD520 of 14.8) at 20°C, which was about twofold of the wild-type strain. Mutants MP2 and MP10 broke the repression mechanism of red pigment biosynthesis in the wild-type and allowed production at 25°C. For cell growth, eight mutants grew remarkably better (12%∼30% biomass higher) than the wild-type at 25°C. This study established an efficient genetic manipulation and transposon insertion mutation platform for polar filamentous fungus. It provides reference for genetic breeding of psychrotrophic fungi from polar and other regions.

Rhizospheric pathogen proliferation and ROS production are associated with premature senescence of the osvha-a1 rice mutant

Root-pathogen interactions influence premature senescence in rice, however, few studies have addressed the underlying mechanism. In this study, when premature senescence significantly occurred in the osvha-a1 mutant (loss of tonoplast H+-ATPase activity), the relative abundance of rhizospheric bacterial communities was similar between the mutant and its wild type, while the fungi in the rhizosphere of the osvha-a1 mutant significantly differed from the wild type. Furthermore, one key fungal strain in the rhizospheric soil of the osvha-a1 mutant, Gibberella intermedia, increased substantially during the late growing phase, resulting in severe accumulation of reactive oxygen species (ROS). By contrast, the wild type showed much lower levels of ROS when infected by G. intermedia. Using high performance liquid chromatography, sugars in root exudates were identified to be different between osvha-a1 mutant and the wild type. G. intermedia could use mannose and rhamnose in root exudates from the mutant more efficiently than any other sugar. Finally, antagonistic bacteria could be employed for limiting the proliferation of G. intermedia in the rhizosphere, thereby alleviating the early senescent phenotypes of the osvha-a1 mutant, and improving grain yield.

Gene introduction approaches in chloroplast transformation and its applications

BACKGROUND

Chloroplast is a type of plastid that is believed to be originated from ancestral cyanobacteria. Chloroplast besides being a major component for photosynthesis, also takes part in another major plant metabolism, making it one of the major components of plants.

MAIN BODY

Chloroplast transformation is an alternative and better genetic engineering approach compared to the nuclear transformation that has been widely applied in plant genetic engineering. Chloroplast transformation has exhibited various positive effects as compared to nuclear transformation. This is a more preferred technique by researchers. To carry out chloroplast transformation, the vector design must be performed, and a selectable marker needs to be incorporated before the chloroplast could uptake the construct. The common way of introducing a gene into the host, which is the chloroplast, involves the biolistic, PEG-mediated, carbon nanotubes carriers, UV-laser microbeam, and Agrobacterium-mediated transformation approaches. Apart from discussing the processes involved in introducing the gene into the chloroplast, this review also focuses on the various applications brought about by chloroplast transformation, particularly in the field of agriculture and environmental science.

CONCLUSION

Chloroplast transformation has shown a lot of advantages and proven to be a better alternative compared to nuclear genome transformation. Further studies must be conducted to uncover new knowledge regarding chloroplast transformation as well as to discover its additional applications in the fields of biotechnology.

The development of a heterologous gene expression system in thermophilic fungus Thermoascus aurantiacus

Thermoascus aurantiacus is a thermophilic fungus that belongs to the ascomycetous class and has attracted increasing interest for its ability to produce thermostable cellulolytic enzymes and growth at elevated temperatures. However, studies on this organism have been limited because of the lack of a genetic manipulation system. Here, we developed a polyethylene glycol (PEG)-mediated transformation system for T. aurantiacus based on an orotidine-5'-monophosphate decarboxylase (pyrG)-deficient mutant, with this method achieving a transformation efficiency of 33 ± 3 transformants per microgram of DNA. Intracellular or secretory expression of heterologous proteins, including green fluorescent protein, β-galactosidase and α-amylase, in T. aurantiacus was successful under the inducible endogenous cellobiohydrolase and endoglucanase gene promoter or the constitutive heterologous pyruvate decarboxylase and enolase gene promoter from Trichoderma reesei. To the best of our knowledge, this is the first report on PEG-mediated transformation of T. aurantiacus, which sets the foundation for strain improvement for biotechnological applications and functional genomic studies.

SUPPLEMENTARY INFORMATION

The online version contains supplementary material available at 10.1007/s13205-021-02963-w.

High-Efficiency Electroporation for Genetic Improvement of Fungal Strains

Electroporation is a method for the introduction of molecules (usually nucleic acids) into a cell, consisting of submitting the cells to high-voltage and short electric pulses in the presence of the exogenous DNA/molecule. It is a versatile method, adaptable to different types of cells, from bacteria to cultured cells to higher eukaryotes, and thus has applications in many diverse fields, such as environmental biology, biotechnology, genetic engineering, and medicine. Electroporation has some advantages over other genetic transformation strategies, including the simplicity of the method, a wide range of adjustable parameters (possibility of optimization), high reproducibility and avoidance of the use of chemicals toxic to cells. Here we describe an optimized electroporation procedure for the industrially important fungus Acremonium chrysogenum, using germinated conidia and fragmented young mycelium. In both cases, the transformation efficiency was higher compared to the conventional polyethylene glycol (PEG)-mediated transformation of protoplasts.

Enhanced polyethylene glycol (PEG)-mediated protoplast transformation system for the phytopathogenic fungus, Ganoderma boninense

The basidiomycete fungus, Ganoderma boninense, has been identified as the main causal agent of oil palm basal stem rot (BSR) disease which has caused significant economic losses to the industry especially in Malaysia and Indonesia. Various efforts have been initiated to understand the disease and this plant pathogen especially at the molecular level. This is the first study of its kind on the development of a polyethylene glycol (PEG)-mediated protoplast transformation system for G. boninense. Based on the minimal inhibitory concentration study, 60 µg/mL and above of hygromycin were effective to completely inhibit G. boninense growth. Approximately 5.145 × 10⁷ cells/mL of protoplasts with the viability of 97.24% was successfully obtained from G. boninense mycelium tissue. The PEG-mediated G. boninense protoplast transformation using 1 µg of transformation vector, 25% of PEG solution, 10 min of pre-transformation incubation, and 30 min of post-transformation incubation has improved the transformation rate as compared with the previous reported protocols for other basidiomycete fungi. Optimization of four transformation parameters has improved the transformation efficiency of G. boninense from an average of 2 to 67 putative transformants. The presence of hygromycin phosphotransferase (hpt) and enhanced green fluorescent protein (eGFP) genes in the putative transformants was detected by PCR and verified by gene sequence analysis. Southern hybridization result further confirmed the integration of hpt gene in G. boninense transformants, and the green fluorescent signal was detected in the G. boninense transformants under the microscopic analysis. The establishment of this transformation system will accelerate the gene function studies of G. boninense especially those genes that may contribute to the pathogenesis of this fungus in oil palm.

Modern Trends in the In Vitro Production and Use of Callus, Suspension Cells and Root Cultures of Medicinal Plants

This paper studies modern methods of producing and using callus, suspension cells and root cultures of medicinal plants in vitro. A new solution for natural product production is the use of an alternative source of renewable, environmentally friendly raw materials: callus, suspension and root cultures of higher plants in vitro. The possibility of using hairy root cultures as producers of various biologically active substances is studied. It is proven that the application of the genetic engineering achievements that combine in vitro tissue culture and molecular biology methods was groundbreaking in terms of the intensification of the extraction process of compounds significant for the medical industry. It is established that of all the callus processing methods, suspension and root cultures in vitro, the Agrobacterium method is the most widely used in practice. The use of agrobacteria has advantages over the biolistic method since it increases the proportion of stable transformation events, can deliver large DNA segments and does not require special ballistic devices. As a result of the research, the most effective strains of agrobacteria are identified.

CRISPR/Cas9-based genome engineering: A new breakthrough in the genetic manipulation of filamentous fungi

Filamentous fungi have several industrial, environmental, and medical applications. However, they are rarely utilized owing to the limited availability of full-genome sequences and genetic manipulation tools. Since the recent discovery of the full-genome sequences for certain industrially important filamentous fungi, CRISPR/Cas9 technology has drawn attention for the efficient development of engineered strains of filamentous fungi. CRISPR/Cas9 genome editing has been successfully applied to diverse filamentous fungi. In this review, we briefly discuss the use of common genetic transformation techniques as well as CRISPR/Cas9-based systems in filamentous fungi. Furthermore, we describe potential limitations and challenges in the practical application of genome engineering of filamentous fungi. Finally, we provide suggestions and highlight future research prospects in the area.

The Gibberellin Producer Fusarium fujikuroi: Methods and Technologies in the Current Toolkit

In recent years, there has been a noticeable increase in research interests on the Fusarium species, which includes prevalent plant pathogens and human pathogens, common microbial food contaminants and industrial microbes. Taken the advantage of gibberellin synthesis, Fusarium fujikuroi succeed in being a prevalent plant pathogen. At the meanwhile, F. fujikuroi was utilized for industrial production of gibberellins, a group of extensively applied phytohormone. F. fujikuroi has been known for its outstanding performance in gibberellin production for almost 100 years. Research activities relate to this species has lasted for a very long period. The slow development in biological investigation of F. fujikuroi is largely due to the lack of efficient research technologies and molecular tools. During the past decade, technologies to analyze the molecular basis of host-pathogen interactions and metabolic regulations have been developed rapidly, especially on the aspects of genetic manipulation. At the meanwhile, the industrial fermentation technologies kept sustained development. In this article, we reviewed the currently available research tools/methods for F. fujikuroi research, focusing on the topics about genetic engineering and gibberellin production.