The Antibacterial Effects of New N-Alkylpyridinium Salts on Planktonic and Biofilm Bacteria

Small Schiff Base Molecules-A Possible Strategy to Combat Biofilm-Related Infections

Microorganisms participating in the development of biofilms exhibit heightened resistance to antibiotic treatment, therefore infections involving biofilms have become a problem in recent years as they are more difficult to treat. Consequently, research efforts are directed towards identifying novel molecules that not only possess antimicrobial properties but also demonstrate efficacy against biofilms. While numerous investigations have focused on antimicrobial capabilities of Schiff bases, their potential as antibiofilm agents remains largely unexplored. Thus, the objective of this article is to present a comprehensive overview of the existing scientific literature pertaining to small molecules categorized as Schiff bases with antibiofilm properties. The survey involved querying four databases (Web of Science, ScienceDirect, Scopus and Reaxys). Relevant articles published in the last 10 years were selected and categorized based on the molecular structure into two groups: classical Schiff bases and oximes and hydrazones. Despite the majority of studies indicating a moderate antibiofilm potential of Schiff bases, certain compounds exhibited a noteworthy effect, underscoring the significance of considering this type of molecular modeling when seeking to develop new molecules with antibiofilm effects.

Shifting from Ammonium to Phosphonium Salts: A Promising Strategy to Develop Next-Generation Weapons against Biofilms

Since they are difficult and sometimes impossible to treat, infections sustained by multidrug-resistant (MDR) pathogens, emerging especially in nosocomial environments, are an increasing global public health concern, translating into high mortality and healthcare costs. In addition to having acquired intrinsic abilities to resist available antibiotic treatments, MDR bacteria can transmit genetic material encoding for resistance to non-mutated bacteria, thus strongly decreasing the number of available effective antibiotics. Moreover, several pathogens develop resistance by forming biofilms (BFs), a safe and antibiotic-resistant home for microorganisms. BFs are made of well-organized bacterial communities, encased and protected in a self-produced extracellular polymeric matrix, which impedes antibiotics' ability to reach bacteria, thus causing them to lose efficacy. By adhering to living or abiotic surfaces in healthcare settings, especially in intensive care units where immunocompromised older patients with several comorbidities are hospitalized BFs cause the onset of difficult-to-eradicate infections. In this context, recent studies have demonstrated that quaternary ammonium compounds (QACs), acting as membrane disruptors and initially with a low tendency to develop resistance, have demonstrated anti-BF potentialities. However, a paucity of innovation in this space has driven the emergence of QAC resistance. More recently, quaternary phosphonium salts (QPSs), including tri-phenyl alkyl phosphonium derivatives, achievable by easy one-step reactions and well known as intermediates of the Wittig reaction, have shown promising anti-BF effects in vitro. Here, after an overview of pathogen resistance, BFs, and QACs, we have reviewed the QPSs developed and assayed to this end, so far. Finally, the synthetic strategies used to prepare QPSs have also been provided and discussed to spur the synthesis of novel compounds of this class. We think that the extension of the knowledge about these materials by this review could be a successful approach to finding effective weapons for treating chronic infections and device-associated diseases sustained by BF-producing MDR bacteria.

Biofilm Removal from In Vitro Narrow Geometries Using Single and Dual Pulse Er:YAG Laser Photoacoustic Irrigation

The disinfection and removal of biofilm from titanium dental implants remains a great challenge in oral medicine. Here we present results of novel photoacoustic irrigation laser modalities for biofilm removal in model geometries mimicking the peri-implant pocket. The efficacy of single pulse (Er:YAG-SSP) and dual pulse (Er:YAG-AutoSWEEPS) photoacoustic irrigation modalities were determined for Enterococcus faecalis biofilm decontamination from titanium surfaces in narrow cylindrical and square gap geometries. The density of bacteria as well as the number of live bacteria were determined prior and after different photoacoustic treatments. Both SSP and AutoSWEEPS photoacoustic irrigation techniques removed at least 92% of biofilm bacteria during the 10 s photoacoustic treatment. The effectiveness of cleaning was better in the narrow square gap geometry compared to the cylindrical geometry. The dual pulse Er:YAG-AutoSWEEPS photoacoustic irrigation showed better results compared to SSP modality. No chemical adjuvants were needed to boost the effectiveness of the photoacoustic irrigation in the saline solution. The results imply that photoacoustic irrigation is an efficient cleaning method for debridement and decontamination in narrow geometries and should be considered as a new therapeutic option for the treatment of peri-implant diseases.

Synthesis, antitubercular evaluation, and molecular docking studies of hybrid pyridinium salts derived from isoniazid

In the quest to develop potent inhibitors for Mycobacterium tuberculosis, novel isoniazid-based pyridinium salts were designed, synthesized, and tested for their antimycobacterial activities against the H₃₇ Rv strain of Mycobacterium tuberculosis using rifampicin as a standard. The pyridinium salts 4k, 4l, and 7d showed exceptional antimycobacterial activities with MIC₉₀ at 1 µg/mL. The in vitro cytotoxicity and pharmacokinetics profiles of these compounds were established for the identification of a lead molecule using in vivo efficacy proof-of-concept studies and found that the lead compound 4k possesses LC₅₀ value at 25 µg/mL. The in vitro antimycobacterial activity results were further supported by in silico studies with good binding affinities ranging from -9.8 to -11.6 kcal/mol for 4k, 4l, and 7d with the target oxidoreductase DprE1 enzyme. These results demonstrate that pyridinium salts derived from isoniazid can be a potentially promising pharmacophore for the development of novel antitubercular candidates.

Anti-Fouling and Anti-Biofilm Performance of Self-Polishing Waterborne Polyurethane with Gemini Quaternary Ammonium Salts

Biofilms are known to be difficult to eradicate and control, complicating human infections and marine biofouling. In this study, self-polishing and anti-fouling waterborne polyurethane coatings synthesized from gemini quaternary ammonium salts (GQAS), polyethylene glycol (PEG), and polycaprolactone diol (PCL) demonstrate excellent antibiofilm efficacy. Their anti-fouling and anti-biofilm performance was confirmed by a culture-based method in broth media, with the biofilm formation factor against Gram-positive (S. aureus) and Gram-negative bacterial strains (E. coli) for 2 days. The results indicate that polyurethane coatings have excellent anti-biofilm activity when the content of GQAS reached 8.5 wt% against S. aureus, and 15.8 wt% against E. coli. The resulting waterborne polyurethane coatings demonstrate both hydrolytic and enzymatic degradation, and the surface erosion enzymatic degradation mechanism enables them with good self-polishing capability. The extracts cyto-toxicity of these polyurethane coatings and degradation liquids was also systematically studied; they could be degraded to non-toxic or low toxic compositions. This study shows the possibility to achieve potent self-polishing and anti-biofilm efficacy by integrating antibacterial GQAS, PEG, and PCL into waterborne polyurethane coatings.

Hydrophobic cell surface display system of PETase as a sustainable biocatalyst for PET degradation

Remarkably, a hydrolase from Ideonella sakaiensis 201-F6, termed PETase, exhibits great potential in polyethylene terephthalate (PET) waste management due to it can efficiently degrade PET under moderate conditions. However, its low yield and poor accessibility to bulky substrates hamper its further industrial application. Herein a multigene fusion strategy is introduced for constructing a hydrophobic cell surface display (HCSD) system in Escherichia coli as a robust, recyclable, and sustainable whole-cell catalyst. The truncated outer membrane hybrid protein FadL exposed the PETase and hydrophobic protein HFBII on the surface of E. coli with efficient PET accessibility and degradation performance. E. coli containing the HCSD system changed the surface tension of the bacterial solution, resulting in a smaller contact angle (83.9 ± 2° vs. 58.5 ± 1°) of the system on the PET surface, thus giving a better opportunity for PETase to interact with PET. Furthermore, pretreatment of PET with HCSD showed rougher surfaces with greater hydrophilicity (water contact angle of 68.4 ± 1° vs. 106.1 ± 2°) than the non-pretreated ones. Moreover, the HCSD system showed excellent sustainable degradation performance for PET bottles with a higher degradation rate than free PETase. The HCSD degradation system also had excellent stability, maintaining 73% of its initial activity after 7 days of incubation at 40°C and retaining 70% activity after seven cycles. This study indicates that the HCSD system could be used as a novel catalyst for efficiently accelerating PET biodegradation.

Assessment of Streptococcus mutans biofilm formation on calcium phosphate ceramics: The role of crystalline composition and microstructure

Streptococcus mutans is one of the bacteria that initiates the colonization of the pellicle at the tooth surface. It forms a plaque, together with other bacteria, which gradually dissolves the pellicle and leaves the tooth surface unprotected against the acidic oral environment. Calcium phosphate ceramics are excellent synthetic materials for the study of biofilm formation in dentistry because they are comparable to teeth in chemical composition and structure. Calcium phosphates can be processed to achieve a variety of crystalline compounds with biologically relevant ionic substitutions and structures that allow study of the effect of the surface chemistry and the topography independently. In this article, we describe the preparation and characterization of three types of calcium phosphate-based materials as a suitable surface for the formation of the S. mutans biofilm: beta-tricalcium phosphate (β-TCP); sintered hydroxyapatite (SHA); and calcium-deficient hydroxyapatite (CDHA). The densest biofilms were formed on the surfaces of SHA and CDHA, with no significant differences due to the stoichiometry or microstructure. In contrast, β-TCP showed a lower susceptibility to S. mutans biofilm formation, suggesting that the crystalline structure is the controlling parameter. Subsequently, SHA was selected to develop a dental biofilm model that allowed study of S. mutans biofilm susceptibility to chlorhexidine and ethanol.

Accelerated biodegradation of polyethylene terephthalate by Thermobifida fusca cutinase mediated by Stenotrophomonas pavanii

Polyethylene terephthalate (PET) is a general plastic that produces a significant amount of waste due to its non-biodagradable properties. We obtained four bacteria (Stenotrophomonas pavanii JWG-G1, Comamonas thiooxydans CG-1, Comamonas koreensis CG-2 and Fulvimonas soli GM-1) that utilize PET as a sole carbon source through a novel stepwise screening and verification strategy. PET films pretreated with S. pavanii JWG-G1 exhibited weight loss of 91.4% following subsequent degradation by Thermobifida fusca cutinase (TfC). S. pavanii JWG-G1 was able to colonize the PET surface and maintain high cell viability (over 50%) in biofilm, accelerating PET degradation. Compared with PET films with no pretreatment, pretreatment with S. pavanii JWG-G1 caused the PET surface to be significantly rougher with greater hydrophilicity (contact angle of 86.3 ± 2° vs. 96.6 ± 2°), providing better opportunities for TfC to contact and act on PET. Our study indicates that S. pavanii JWG-G1 could be used as a novel pretreatment for efficiently accelerating PET biodegradation by TfC.

Photoacoustic removal of Enterococcus faecalis biofilms from titanium surface with an Er:YAG laser using super short pulses

Biofilms that grow on implant surfaces pose a great risk and challenge for the dental implant survival. In this work, we have applied Er:YAG photoacoustic irrigation using super short pulses (Er:YAG-SSP) to remove biofilms from the titanium surfaces in the non-contact mode. Mature Enterococcus faecalis biofilms were treated with saline solution, chlorhexidine, and hydrogen peroxide, or photoacoustically with Er:YAG-SSP for 10 or 60 s. The number of total and viable bacteria as well as biofilm surface coverage was determined prior and after different treatments. Er:YAG-SSP photoacoustic treatment significantly increases the biofilm removal rate compared to saline or chemically treated biofilms. Up to 92% of biofilm-covered surface can be cleaned in non-contact mode during 10 s without the use of abrasives or chemicals. In addition, Er:YAG-SSP photoacoustic irrigation significantly decreases the number of viable bacteria that remained on the titanium surface. Within the limitations of the present in vitro model, the ER:YAG-SSP seems to constitute an efficient therapeutic option for quick debridement and decontamination of titanium implants without using abrasives or chemicals.