Cytotoxic, Antimitotic, DNA Binding, Photocatalytic, H2O2 Sensing, and Antioxidant Properties of Biofabricated Silver Nanoparticles Using Leaf Extract of Bryophyllum pinnatum (Lam.) Oken

Polyhexamethylene biguanidine coated silver nanoparticles embedded into chitosan thiourea/PVA nanofibers as wound healing mats: In vitro and in vivo studies

Burn injuries are prone to infection, leading to significant public health concerns and economic implications. There is a growing demand to develop innovative wound dressings with antibacterial activity. In this study, silver nanoparticles coated with polyhexamethylene biguanidine (Ag/PHMBG) were embedded into chitosan thiourea (CST) nanofibers as a novel multifunctional wound healing mat for treating second-degree burn wounds. Structural, mechanical, and biological properties of nanofibers were investigated using FE-SEM, XRD, ATR-FTIR, and In vitro degradation. The animal study was performed to investigate the suitability of the polymeric mats as a wound healing/dressing system. FE-SEM analysis revealed that the average diameter of the obtained uniform and bead-less Ag/PHMBG-loaded CST nanofibers was around 75 nm. CST-based nanofibers with 3 wt% Ag/PHMBG (PCT3) demonstrated notable antimicrobial efficacy against both S. aureus and P. aeruginosa, achieving 95 % growth inhibition within 3 days while exhibiting no cytotoxic effects on normal fibroblast cells. In addition, CST nanofibers have good breathability with a water vapor transmittance rate of 2.9 ± 0.41-4.4 ± 0.47 kg/m2. d. The animal studies showed that the wound healing and tissue regeneration process by PCT3 nanofibers were faster than the other groups. In conclusion, CST-based nanofibers are a potentially promising substitute for conventional wound dressings in clinical applications.

Biogenic biocompatible silver nanoparticles: a promising antibacterial agent

The biogenic synthesis of silver nanoparticles (AgNPs) are gaining attention because they are eco-friendly, non-hazardous, economical and devoid of the drawbacks of physicochemical processes. Biogenic approaches for synthesizing nanoparticles (NPs) using plant leaves, seeds, bark, stems, fruits, roots and flowers are highly cost-effective compared to other methods. Silver (Ag) has been used since ancient times, but biogenic AgNPs have only been made in the last few decades. They have been employed primarily in the food and pharmaceutical industries as antimicrobials and antioxidants. Recent studies have confirmed that many molecules present in different bacteria, including Escherichia coli, Staphylococcus aureus, Citrobacter koseri, Bacillus cereus, Salmonella typhi, Klebsipneumoniaoniae, Vibrio parahaemolyticus, Pseudomonas Aeruginosa, are bound to the AgNPs and can be inhibited using multifaceted mechanisms like AgNPs inter inside the cells, free radicals, ROS generation and modulate transduction pathways. Recent breakthroughs in nanobiotechnology-based therapeutics have opened up new possibilities for fighting microorganisms. Thus, in particular, biogenic AgNPs as powerful antibacterial agents have gained much interest. Surface charge, colloidal state, shape, concentration and size are the most critical physicochemical characteristics that determine the antibacterial potential of AgNPs. Based on this review, it can be stated that AgNPs could be made better in terms of their potency, durability, accuracy, biosecurity and compatibility.

Sustainable green synthesis of Hedychium coronarium leaf extract-stabilized silver nanoparticles and their applications: colorimetric sensing of Sn2+ and Hg2+ and antifungal and antimicrobial properties

Hedychium coronarium (Hc) (commonly known as Gulbakawali) leaf extract was used for the stable and sustainable green synthesis of silver nanoparticles (Hc-AgNPs), which were biodegradable and non-toxic. Hedychium coronarium leaf extract was used as a reducing agent to stabilize the Hc-AgNPs by converting Ag+ to Ag0 without adding any capping agent. It demonstrated stability for up to six months, and no agglomeration was observed. The Hc-AgNPs were characterized using X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FT-IR), transmission electron microscopy (TEM), ultraviolet-visible spectrophotometry, and fluorescence spectroscopy analysis. The UV-visible spectrum supported the formation of stable Hc-AgNPs by displaying a strong surface plasmon resonance (SPR) peak at 440 nm. FT-IR spectra showed the functional groups present in the leaf extract of Hedychium coronarium, which was the primary source of secondary metabolites attached to Ag0. XRD analysis revealed a distinct 2θ peak of Hc-AgNPs at 38.15°, indicating a face-centred cubic structure with a crystallite size of 22.6 ± 1 nm at the (111) plane. Moreover, TEM demonstrated the spherical morphology of the Hc-AgNPs with an average particle size of 22.42 ± 1 nm. The photophysical characteristics of the Hc-AgNPs, as highlighted by their UV-vis and fluorescence characteristics, revealed their semiconducting nature with an impressive band gap (E g) value of 3.78 eV. Fascinatingly, the fluorescence activity of Hc-AgNPs at 504 nm showed a broad emission band corresponding to the absorption band at 251 nm. We performed the selective colorimetric sensing of Sn2+ metal ions using Hc-AgNPs, which demonstrated a detection limit of 10-3 M, suggesting their potential as very good solid biosensors. Interestingly, the Hc-AgNPs showed antifungal activity, which has not been reported before. Specifically, the results showed that the Hc-AgNPs had a higher fungitoxicity effect against Aspergillus flavus (59.58 ± 3.68) than against Fusarium oxysporum (57.93 ± 4.18). The antibacterial activity of the Hc-AgNPs was evaluated against three Gram-negative phytopathogenic bacteria: Xanthomonas oryzae (X. oryzae), Ralstonia solanacearum (R. solanacearum), and Erwinia carotovora (E. carotovora), showing effective inhibition zones of 16.33 ± 0.57, 15.33 ± 0.57, and 14.33 ± 0.57 mm, respectively. These results indicate that the Hc-AgNPs could inhibit these phytopathogenic bacteria with varying degrees of effectiveness in the order of X. oryzae > R. solanacearum > E. carotovora.

Green synthesis of silver nanoparticles from Brassaiopsis hainla extract for the evaluation of antibacterial and anticorrosion properties

Plant-mediated synthesis of silver nanoparticles (AgNPs) is an eco-friendly and convenient alternative to conventional methods. Brassaiopsis hainla (B. hainla) leaf extract (BHE) was used in this study to reduce metal salts and cap and stabilize nanoparticles (NPs), which were characterized and tested for antibacterial and anti-corrosion properties. Stirring the B. hainla extract with AgNO3 led to a color change, indicating nanoparticle formation. The absorption peak at 428 nm in the UV-visible spectrum further validated its formation. The AgNPs were characterized using various techniques such as FTIR, UV-visible, PXRD, HRTEM, SEM, and EDX. Powder X-ray diffraction analysis confirmed its nanocrystalline nature, with an average crystallite size of 17.92 nm. The FTIR spectrum showed hydroxyl, amine, amide, and carbonyl groups as capping and reducing agents for the AgNPs. SEM analysis revealed poly-dispersed NPs of various sizes, while EDX showed an intense peak for Ag, and TEM images revealed mostly hexagonal and triangular NPs. Antibacterial activity was tested against three human pathogens: Staphylococcus aureus (S. aureus), Pseudomonas, and Klebsiella oxytoca (K. oxytoca). Significant antibacterial activity was observed specifically against K. oxytoca, with an 11 mm inhibition zone. Both plant extracts and AgNPs inhibited acid-induced corrosion, with the highest inhibition efficiencies of 81.69 % and 69.54 % at 1000 ppm, respectively. With rising concerns over bacterial resistance and metal corrosion, this study addresses global challenges related to new antimicrobial agents, which are crucial for combating antibiotic resistance and protecting metals in various industries.

Green synthesis of gold and silver nanoparticles using crude extract of Aconitum violaceum and evaluation of their antibacterial, antioxidant and photocatalytic activities

Green synthesis of metal nanoparticles (NPs) has received extensive attention over other conventional approaches due to their non-toxic nature and more biocompatibility. Herein we report gold and silver NPs (AuNPs@AV and AgNPs@AV) prepared by employing a green approach using crude extract of Aconitum violaceum Jacquem. ex Stapf. The synthesized NPs were characterized using Scanning Electron Microscopy (SEM), Transmission Electron Microscopy (TEM), Energy Dispersive X-ray (EDX), X-ray Diffraction (XRD), UV/Visible spectroscopy, Fourier Transform Infrared (FTIR), X-ray Photoelectron Spectroscopy (XPS), and Zeta Potential. Morphological analysis showed spherical and triangular shapes of the NPs with average size of <100 nm. The AuNPs@AV and AgNPs@AV exhibited effective antibacterial activities, with minimum inhibitory concentrations (MICs) of 95 and 70 μg/mL against Lactobacillus acidophilus (L. acidophilus) and 90 and 65 μg/mL against Escherichia coli (E. coli), respectively. Strong antioxidant effect of AuNPs@AV and AgNPs@AV were reported against DPPH radical and PTIO within range of IC50 values; 161-80 μg/ml as compared to the standard (23-11 μg/mL) respectively. Moreover, the AuNPs@AV and AgNPs@AV showed efficient photocatalytic activity and degraded 89.88% and 93.7% methylene blue (MB) dye under UV light, respectively.

Green synthesis of silver nanoparticles by using Allium sativum extract and evaluation of their electrical activities in bio-electrochemical cell

An electrical application of green synthesized silver nanoparticles (Ag NPs) by developing a unique bio-electrochemical cell (BEC) has been addressed in the report. Here, garlic extract (GE) has been used as a reducing agent to synthesize Ag NPs, and as a bio-electrolyte solution of BEC. Ag NPs successfully formed into face-centered cubic structures with average crystallite and particle sizes of 8.49 nm and 20.85 nm, respectively, according to characterization techniques such as the UV-vis spectrophotometer, XRD, FTIR, and FESEM. A broad absorption peak at 410 nm in the UV-visible spectra indicated that GE played a vital role as a reducing agent in the transformation of Ag+ions to Ag NPs. After that four types of BEC were developed by varying the concentration of GE, CuSO4. 5H2O, and Ag NPs electrolyte solution. The open circuit voltage and short circuit current of all cells were examined with the time duration. Moreover, different external loads (1 Ω, 2 Ω, 5 Ω, and 6 Ω) were used to investigate the load voltage and load current of BEC. The results demonstrated that the use of Ag NPs on BEC played a significant role in increasing the electrical performance of BEC. The use of GE-mediated Ag NPs integrated the power, capacity, voltage efficiency, and energy efficiency of BEC by decreasing the internal resistance and voltage regulation. These noteworthy results can take a frontier forward to the development of nanotechnology for renewable and low-cost power production applications.

Bioinspired Multifunctional Silver Nanoparticles for Optical Sensing Applications: A Sustainable Approach

Silver nanoparticles developed via biosynthesis are the most fascinating nanosized particles and encompassed with excellent physicochemical properties. The bioinspired nanoparticles with different shapes and sizes have attracted huge attention due to their stability, low cost, environmental friendliness, and use of less hazardous chemicals. This is an ideal method for synthesizing a range of nanosized metal particles from plants and biomolecules. Optical biosensors are progressively being fabricated for the attainment of sustainability by using opportunities offered by nanotechnology. This review focuses mainly on tuning the optical properties of the metal nanoparticles for optical sensing to explore the importance and applications of bioinspired silver nanoparticles. Further, this review deliberates the role of bioinspired silver nanoparticles (Ag NPs) in biomedical, agricultural, environmental, and energy applications. Profound insight into the antimicrobial properties of these nanoparticles is also appreciated. Tailor-made bioinspired nanoparticles with effectuating characteristics can unsurprisingly target tumor cells and distribute enwrapped payloads intensively. Existing challenges and prospects of bioinspired Ag NPs are also summarized. This review is expected to deliver perceptions about the progress of the next generation of bioinspired Ag NPs and their outstanding performances in various fields by promoting sustainable practices for fabricating optical sensing devices.

Green synthesis of nano silver-embedded carboxymethyl starch waste/poly vinyl alcohol hydrogel with photothermal sterilization and pH-responsive behavior

Bacterial wound infections remain a significant health issue of great concern. Hence, there is a need to develop a novel material with antibacterial properties and smart functions. In this study, the effects of silver nanoparticles content (AgNPs) on properties of photothermal and pH-responsive nanocomposite hydrogels were investigated. The nanocomposite hydrogel samples were prepared using cassava starch waste modified by carboxymethylation (CMS), and mixed with poly vinly alcohol (PVA) and tannic acid (TA). The presence of AgNPs in the hydrogel samples enhanced antibacterial activities and photothermal conversion ability. The use of as-prepared hydrogel using 200 mM silver nitrate (H-AgNPs-200) combined with near infrared (NIR) radiation produced 100 % antibacterial efficiency for Escherichia coli (E.coli) and 98.2 % for Staphylococcus aureus (S.aureus). Furthermore, the H-AgNPs-200 also provided the highest storage modulus at 87.9 kPa. The obtained nanocomposite hydrogel was shown to exhibit pH-responsive release of TA. Under NIR radiation, higher release of TA at different pH was observed. The cytotoxicity study indicated that the nanocomposite hydrogels had good biocompatibility. Hence, the development of nanocomposite hydrogel-based CMS from cassava starch waste/PVA/AgNPs is a promising and sustainable approach where agro-waste product is used as the base material for medical application in wound dressing.

Silver Nanoparticles Synthesized from Abies alba and Pinus sylvestris Bark Extracts: Characterization, Antioxidant, Cytotoxic, and Antibacterial Effects

In recent years, phytofunctionalized AgNPs have attracted great interest due to their remarkable biological activities. In the present study, AgNPs were synthesized using Abies alba and Pinus sylvestris bark extracts. The chemical profile of these bark extracts was analyzed by LC-HRMS/MS. As a first step, the synthesis parameters (pH, AgNO₃ concentration, ratio of bark extract and AgNO₃, temperature, and reaction time) were optimized. The synthesized AgNPs were characterized by ATR-FTIR spectroscopy, DLS, SEM, EDX, and TEM. Their antioxidant, cytotoxic, and antibacterial properties were evaluated by the DPPH, ABTS, MTT, and broth microdilution assays, respectively. Abies alba and Pinus sylvestris bark extract-derived AgNPs were well-dispersed, spherical, small (average particle size of 9.92 and 24.49 nm, respectively), stable (zeta potential values of -10.9 and -10.8 mV, respectively), and cytotoxic to A-375 human malignant melanoma cells (IC₅₀ = 2.40 ± 0.21 and 6.02 ± 0.61 μg/mL, respectively). The phytosynthesized AgNPs also showed antioxidant and antibacterial effects.

Analytical Model for Determination of Size-Distribution of Colloidal Silver Nanoparticles from Surface Plasmon Resonance Wavelength and Dielectric Functions

In this work it is shown that the size of silver nanoparticles in a colloidal solution can be determined only from the wavelength of the surface plasmon resonance and material and medium dielectric functions. The size dependence of dielectric functions of silver nanoparticles becomes noticeable in nanoparticles which are smaller than 30 nm in size, which is in accordance with Mie scattering theory applicability. The novelty of this work is in the development of an analytical model for the determination of the size of silver nanoparticles derived from applying shift functions to the UV-Vis spectra, resulting in well-known characteristic diameters of log-normal size distribution function. The purpose of these shift functions is the reconstruction of experimental UV-Vis spectra from simulated ones based on the Beer-Lambert law and log-normal distribution function in order to find the mode diameters of colloidal silver nanoparticles. The introduction of Lagrangian analogue of extinction cross section explains the redshift constant characteristic for given nanoparticle material and the size distribution of nanoparticles. Therefore, the size determination of colloidal silver nanoparticles is possible only through UV-Vis spectroscopy.

Leucophyllum frutescens mediated synthesis of silver and gold nanoparticles for catalytic dye degradation

The application of nanotechnology is gaining worldwide attention due to attractive physico-chemical and opto-electronic properties of nanoparticles that can be also employed for catalytic dye degradation. This study reports a phytogenic approach for fabrication of silver (AgNPs) and gold nanoparticles (AuNPs) using Leucophyllum frutescens (Berl.) I. M. Johnst (Scrophulariaceae) leaf extract (LFLE). Development of intense dark brown and purple color indicated the synthesis of AgNPs and AuNPs, respectively. Further characterization using UV-visible spectroscopy revealed sharp peak at 460 nm and 540 nm for AgNPs and AuNPs, respectively that were associated to their surface plasmon resonance. High resolution transmission electron microscope (HRTEM) revealed the spherical shape of the AgNPs, whereas anisotropic AuNPs were spherical, triangular and blunt ended hexagons. The majority of the spherical AgNPs and AuNPs were ∼50 ± 15 nm and ∼22 ± 20 nm, respectively. Various reaction parameters such as, metal salt concentration, temperature and concentration of the leaf extract were optimized. Maximum synthesis of AgNPs was obtained when 5 mM for AgNO₃ reacted with 10% LFLE for 48 h at 50°C. Likewise, AuNPs synthesis was highest when 2 mM HAuCl₄ reacted with 10% LFLE for 5 h at 30°C. Energy dispersive spectroscopy (EDS) showed phase purity of both the nanoparticles and confirmed elemental silver and gold in AgNPs and AuNPs, respectively. The average hydrodynamic particles size of AgNPs was 34.8 nm while AuNPs was 140.8 nm as revealed using dynamic light scattering (DLS) that might be due to agglomeration of smaller nanoparticles into larger clusters. ZETA potential of AgNPs and AuNPs were 0.67 mV and 5.70 mV, respectively. X-ray diffraction (XRD) analysis confirmed the crystallinity of the nanoparticles. Fourier transform infrared spectroscopy (FTIR) confirmed that various functional groups from the phytochemicals present in LFLE played a significant role in reduction and stabilization during the biogenic synthesis of the nanoparticles. The bioreduced AgNPs and AuNPs catalytically degraded Rhodamine B dye (RhB) in presence of UV-light with degradation rate constants of 0.0231 s⁻¹ and 0.00831 s⁻¹, respectively. RhB degradation followed a first order rate kinetics with 23.1 % and 31.7% degradation by AgNPs and AuNPs, respectively.

Fitting Procedure to Reconstruct the Size Distribution and the Concentration of Silver Colloidal Nanoparticles from UV-Vis Spectra

In this work, a complete fitting procedure of UV-Vis spectra of silver nanoparticles in colloidal solutions is reported. The fitting function, based on the Beer-Lambert law, Mie theory, and log-normal probability distribution of nanoparticles' sizes, is developed and confirmed by 33 different independent measurements. In order to validate the accuracy of the function's behavior on different spectra, freely accessible measurements were used, proving that the fitting function works independently of the method of their production-laser or chemical synthesis of nanoparticles. The developed fitting function is, to the best of our knowledge, novel and not based on any conventional spectral analysis approaches like the Mie-Gans procedure. Furthermore, since fitted parameters are all physical, it allows determination of the mode diameter of nanoparticles as well as the standard deviation of the log-normal distribution of sizes. It enables the reconstruction of size distribution of nanoparticles in colloidal solution. Step-by-step derivation of the fitting function is provided with a physical explanation of all parameters. The importance of Lorentzian dependence emerging at the core of Beer-Lambert law is physically discussed and linked to harmonic oscillator behavior of localized surface plasmon resonance of silver nanoparticles in a colloidal solution. Size distribution reconstruction from fitted parameters according to a log-normal distribution function is provided and a concentration calculation is presented.

Photocatalytic Activity Induced by Metal Nanoparticles Synthesized by Sustainable Approaches: A Comprehensive Review

Nanotechnology is a fast-expanding area with a wide range of applications in science, engineering, health, pharmacy, and other fields. Among many techniques that are employed toward the production of nanoparticles, synthesis using green technologies is the simplest and environment friendly. Nanoparticles produced from plant extracts have become a very popular subject of study in recent decades due to their diverse advantages such as low-cost synthesis, product stability, and ecofriendly protocols. These merits have prompted the development of nanoparticles from a variety of sources, including bacteria, fungi, algae, proteins, enzymes, etc., allowing for large-scale production with minimal contamination. However, nanoparticles obtained from plant extracts and phytochemicals exhibit greater reduction and stabilization and hence have proven the diversity of properties, like catalyst/photocatalyst, magnetic, antibacterial, cytotoxicity, circulating tumor deoxy ribo nucleic acid (CT-DNA) binding, gas sensing, etc. In the current scenario, nanoparticles can also play a critical role in cleaning wastewater and making it viable for a variety of operations. Nano-sized photocatalysts have a great scope toward the removal of large pollutants like organic dyes, heavy metals, and pesticides in an eco-friendly and sustainable manner from industrial effluents. Thus, in this review article, we discuss the synthesis of several metal nanoparticles using diverse plant extracts, as well as their characterization via techniques like UV–vis (ultraviolet–visible), XRD (X-ray diffraction), SEM (scanning electron microscopy), TEM (transmission electron microscopy), FTIR (Fourier transform infrared spectroscopy), etc., and catalytic activity on various hazardous systems.

Therapeutic potential of biogenic and optimized silver nanoparticles using Rubia cordifolia L. leaf extract

Rubia cordifolia L. is a widely used traditional medicine in the Indian sub-continent and Eastern Asia. In the present study, the aqueous leaf extract of the R. Cordifolia was used to fabricate silver nanoparticles (RC@AgNPs), following a green synthesis approach. Effect of temperature (60 °C), pH (8), as well the concentration of leaf extract (2 ml) and silver nitrate (2 mM) were optimized for the synthesis of stable RC@AgNPs. The phytofabrication of nanosilver was validated by UV–visible spectral analysis, which displayed a distinctive surface plasmon resonance peak at 432 nm. The effective functional molecules as capping and stabilizing agents, and responsible for the conversion of Ag⁺ to nanosilver (Ag⁰) were identified using the FTIR spectra. The spherical RC@AgNPs with an average size of ~ 20.98 nm, crystalline nature, and 61% elemental composition were revealed by TEM, SEM, XRD, and. EDX. Biogenic RC@AgNPs displayed a remarkable anticancer activity against B16F10 (melanoma) and A431 (carcinoma) cell lines with respective IC₅₀ of 36.63 and 54.09 µg/mL, respectively. Besides, RC@AgNPs showed strong antifungal activity against aflatoxigenic Aspergillus flavus, DNA-binding properties, and DPPH and ABTS free radical inhibition. The presented research provides a potential therapeutic agent to be utilized in various biomedical applications.

Phyto-Functionalized Silver Nanoparticles Derived from Conifer Bark Extracts and Evaluation of Their Antimicrobial and Cytogenotoxic Effects

Silver nanoparticles synthesized using plant extracts as reducing and capping agents showed various biological activities. In the present study, colloidal silver nanoparticle solutions were produced from the aqueous extracts of Picea abies and Pinus nigra bark. The phenolic profile of bark extracts was analyzed by liquid chromatography coupled to mass spectrometry. The synthesis of silver nanoparticles was monitored using UV-Vis spectroscopy by measuring the Surface Plasmon Resonance band. Silver nanoparticles were characterized by attenuated total reflection Fourier transform infrared spectroscopy, Raman spectroscopy, dynamic light scattering, scanning electron microscopy, energy dispersive X-ray and transmission electron microscopy analyses. The antimicrobial and cytogenotoxic effects of silver nanoparticles were evaluated by disk diffusion and Allium cepa assays, respectively. Picea abies and Pinus nigra bark extract derived silver nanoparticles were spherical (mean hydrodynamic diameters of 78.48 and 77.66 nm, respectively) and well dispersed, having a narrow particle size distribution (polydispersity index values of 0.334 and 0.224, respectively) and good stability (zeta potential values of -10.8 and -14.6 mV, respectively). Silver nanoparticles showed stronger antibacterial, antifungal, and antimitotic effects than the bark extracts used for their synthesis. Silver nanoparticles obtained in the present study are promising candidates for the development of novel formulations with various therapeutic applications.

A review on plant-mediated synthesis of silver nanoparticles, their characterization and applications

For decades, silver has been used as a non-toxic inorganic antimicrobial agent. Silver has a lot of potential in a variety of biological/chemical applications, particularly in the form of nanoparticles (NPs). Eco-friendly synthesis approach for NPs are becoming more common in nanobiotechnology, and the demand for biological synthesis methods is growing, with the goal of eliminating hazardous and polluting agents. Cultures of bacteria, fungi, and algae, plant extracts, and other biomaterials are commonly used for NP synthesis in the ‘green synthesis’ process. Plant-based green synthesis is a simple, fast, dependable, cost-effective, environmentally sustainable, and one-step method that has a significant advantage over microbial synthesis due to the lengthy process of microbial isolation and pure culture maintenance. In this report, we focussed on phytosynthesis of silver nanoparticles (AgNPs) and their characterization using various techniques such as spectroscopy (UV–vis, FTIR), microscopy (TEM, SEM), X-Ray diffraction (XRD), and other particle analysis. The potential applications of AgNPs in a variety of biological and chemical fields are discussed.