Continuous Myoelectric Prediction of Future Ankle Angle and Moment Across Ambulation Conditions and Their Transitions

The use of nonnormalized surface EMG and feature inputs for LSTM-based powered ankle prosthesis control algorithm development

Advancements in instrumentation support improved powered ankle prostheses hardware development. However, control algorithms have limitations regarding number and type of sensors utilized and achieving autonomous adaptation, which is key to a natural ambulation. Surface electromyogram (sEMG) sensors are promising. With a minimized number of sEMG inputs an economic control algorithm can be developed, whereas limiting the use of lower leg muscles will provide a practical algorithm for both ankle disarticulation and transtibial amputation. To determine appropriate sensor combinations, a systematic assessment of the predictive success of variations of multiple sEMG inputs in estimating ankle position and moment has to conducted. More importantly, tackling the use of nonnormalized sEMG data in such algorithm development to overcome processing complexities in real-time is essential, but lacking. We used healthy population level walking data to (1) develop sagittal ankle position and moment predicting algorithms using nonnormalized sEMG, and (2) rank all muscle combinations based on success to determine economic and practical algorithms. Eight lower extremity muscles were studied as sEMG inputs to a long-short-term memory (LSTM) neural network architecture: tibialis anterior (TA), soleus (SO), medial gastrocnemius (MG), peroneus longus (PL), rectus femoris (RF), vastus medialis (VM), biceps femoris (BF) and gluteus maximus (GMax). Five features extracted from nonnormalized sEMG amplitudes were used: integrated EMG (IEMG), mean absolute value (MAV), Willison amplitude (WAMP), root mean square (RMS) and waveform length (WL). Muscle and feature combination variations were ranked using Pearson's correlation coefficient (r > 0.90 indicates successful correlations), the root-mean-square error and one-dimensional statistical parametric mapping between the original data and LSTM response. The results showed that IEMG+WL yields the best feature combination performance. The best performing variation was MG + RF + VM (r_position = 0.9099 and r_moment = 0.9707) whereas, PL (r_position = 0.9001, r_moment = 0.9703) and GMax+VM (r_position = 0.9010, r_moment = 0.9718) were distinguished as the economic and practical variations, respectively. The study established for the first time the use of nonnormalized sEMG in control algorithm development for level walking.

Introduction to a Twin Dual-Axis Robotic Platform for Studies of Lower Limb Biomechanics

This paper presents a twin dual-axis robotic platform system which is designed for the characterization of postural balance under various environmental conditions and quantification of bilateral ankle mechanics in 2 degrees-of-freedom (DOF) during standing and walking. Methods: Validation experiments were conducted to evaluate performance of the system: 1) to apply accurate position perturbations under different loading conditions; 2) to simulate a range of stiffness-defined mechanical environments; and 3) to reliably quantify the joint impedance of mechanical systems. In addition, several human experiments were performed to demonstrate the system's applicability for various lower limb biomechanics studies. The first two experiments quantified postural balance on a compliance-controlled surface (passive perturbations) and under oscillatory perturbations with various frequencies and amplitudes (active perturbations). The second two experiments quantified bilateral ankle mechanics, specifically, ankle impedance in 2-DOF during standing and walking. The validation experiments showed high accuracy of the platform system to apply position perturbations, simulate a range of mechanical environments, and quantify the joint impedance. Results of the human experiments further demonstrated that the platform system is sensitive enough to detect differences in postural balance control under challenging environmental conditions as well as bilateral differences in 2-DOF ankle mechanics. This robotic platform system will allow us to better understand lower limb biomechanics during functional tasks, while also providing invaluable knowledge for the design and control of many robotic systems including robotic exoskeletons, prostheses and robot-assisted balance training programs. Clinical and Translational Impact Statement- Our robotic platform system serves as a tool to better understand the biomechanics of both healthy and neurologically impaired individuals and to develop assistive robotics and rehabilitation training programs using this information.

IMU Motion Capture Method with Adaptive Tremor Attenuation in Teleoperation Robot System

Teleoperation robot systems can help humans perform tasks in unstructured environments. However, non-intuitive control interfaces using only a keyboard or joystick and physiological tremor reduce the performance of teleoperation. This paper presents an intuitive control interface based on the wearable device gForcePro+ armband. Two gForcePro+ armbands are worn at the centroid of the upper arm and forearm, respectively. Firstly, the kinematics model of the human arm is established, and the inertial measurement units (IMUs) are used to capture the position and orientation information of the end of the arm. Then, a regression model of angular transformation is developed for the phenomenon that the rotation axis of the torsion joint is not perfectly aligned with the limb segment during motion, which can be applied to different individuals. Finally, to attenuate the physiological tremor, a variable gain extended Kalman filter (EKF) fusing sEMG signals is developed. The described control interface shows good attitude estimation accuracy compared to the VICON optical capture system, with an average angular RMSE of 4.837° ± 1.433°. The performance of the described filtering method is tested using the xMate3 Pro robot, and the results show it can improve the tracking performance of the robot and reduce the tremor.

Prediction of EMG Activation Profiles from Gait Kinematics and Kinetics during Multiple Terrains

Continuous myoelectric prediction of intended limb dynamics has the ability to provide transparent control of a prosthesis by the user. However, the impact on these models of adding a human user into the control loop is less clear. Here, the ability of a User Response Model (URM) to continuously predict EMG activity from gait kinematics and kinetics collected during three mobility tasks (level-ground walking, stair ascent, and stair descent) was examined. Multiple-input, multiple-output NARX-based URMs were developed with two outputs (ankle plantarflexor and dorsiflexor) and variable inputs (ankle kinetics, and shank and/or ankle kinematics). Accuracy in predicting the tibialis anterior and medial gastrocnemius EMG was comparable across URMs regardless of the number of inputs. Stair descent had the lowest accuracy among the mobility tasks. No significant differences in normalized root-mean-square error and cross-correlation were found between URMs with five and nine inputs. A URM that continuously predicts EMG activity from gait kinetics and kinematics could be used to simulate human-in-the-loop myoelectric control of a transtibial prosthesis and examine the stability of the system to changes in the environment or due to control errors.