Use of a Flexible Inflatable Multi-Channel Applicator for Vaginal Brachytherapy in the Management of Gynecologic Cancer

Applicators used for vaginal high dose rate brachytherapy: Effect of type and shape on dose distribution and toxicity, a literature review

The aim of this article is to represent a literature review on the applicators used for vaginal high dose rate brachytherapy for patients with endometrial cancer. The different types and shapes of the clinically used applicator as well as the effects of their characteristics on dose distribution, target coverage and dose received by organs at risk are discussed in detail.

A Dosimetric evaluation of a high dose rate cobalt-60 brachytherapy source using shielded, single and multi-channel cylinder applicators for gynecological cancers

Vaginal brachytherapy is a standard method for preventing the recurrences of malignancies in the treatment of gynecological cancers. Cylindrical applicators are usually employed in high dose rate cobalt-60 source brachytherapy after abdominal hysterectomy or bilateral salpingo-oophorectomy treatment. The aim of this study is to conduct an assessment of dosimetric properties of single channel, multichannel, and shielded cylinder applicators. This study utilizes a pelvis phantom with three different volumes of bladder and rectum to perform dose measurement around the cylindrical applicators. GAFCHROMIC EBT3 model film was used to measure dose distributions in water phantom around the bladder, rectum, applicator, and CTV. In order to properly compare the performance of the shielded applicator with multichannel and single channel applicators, we consider the both cases of a one-sided CTV and two CTVs placed on both sides of the vagina. Dose-volume histograms analysis shows no statistically significant difference in tumoral region for the two types of CTV between cylindrical applicators. The V_120%, V_100% and D_95% values of target volume were 47.36%. 91.46%, and 3.99Gy for multi-channel cylinder applicator, 60.2%, 95.02%, and 3.99Gy for single channel cylinder applicator, respectively. Statistical analysis reports D_0.1cc, D_1cc, and D_2cc for the multichannel applicator demonstrates a significant dose reduction in bladder compared with single channel. The V_120%, V_100%, and D_95% values of target volume were 55.50%. 97.90%, and 3.91Gy for multi-channel cylinder applicator with four active channels (MCC-4), 41.56%, 92.10%. and 4.13Gy for shielded cylinder applicator, respectively. Statistical analysis reports D_0.1cc, D_1cc and D_2cc for the MCC-4 demonstrates a noticeable dose reduction in bladder and rectum compared with Shielded channel. The results indicate that employing multichannel applicator in vaginal high dose rate cobalt-60 source brachytherapy can reduce the received dose to organs at risk without any significant loss of received dose in CTV, which is contributed to its asymmetric or symmetric dose distribution that depend on which channels are activated.

Preliminary results of modified interstitial MIAMI brachytherapy applicator for treatment of upper and apical vaginal tumors

Purpose

Intracavitary vaginal brachytherapy (VBT) cylinders are limited in treating upper/apical vaginal disease due to the distance between the target and radiation source positions. Interstitial brachytherapy devices directly expose the vaginal mucosa to radiation sources, increasing morbidity. To target apical disease while limiting excessive treatment to the vaginal mucosa and organs at risk, we modified the commercially available multichannel MIAMI applicator, allowing the direct extension of needles into the apex with the protection of cylinder.

Material and methods

The device has one central plastic core with six peripheral channels. The modified device permits titanium needles to surpass the apical surface into vaginal tissue. A retrospective analysis on thirteen patients treated with this device was conducted. Patient demographics, gross tumor volume (GTV)/clinical target volume (CTV), initial diagnosis and management, toxicity data, and EQD₂ data for the bladder and rectum were obtained.

Results

There were ten patients with vaginal recurrences and three with primary vaginal/cervical cancers. Mean dosage of VBT treatment was 25.5 Gy in 3-5 fractions. Mean dosage of external beam radiation therapy (EBRT) treatment was 44 Gy. Common acute toxicities included diarrhea, fatigue, cystitis, and nausea. Common chronic toxicities were pelvic pain, vaginal stenosis, and skin telangiectasia. Mean EQD₂ dose for bladder and rectum were 72.3 Gy and 62.3 Gy, respectively. Ten patients had no evidence of relapse, two suffered from distant metastases, and one patient with stage IIIA cervical adenocarcinoma had loco-regional recurrence seventeen months after radiation treatment.

Conclusions

Our data suggests that the custom applicator is associated with robust dosimetric coverage, good loco-regional control, acceptable toxicity, and reduced tissue trauma. This device allows treatment of apically located vaginal tumors without significant damage to the vaginal vault and organs at risk. Additionally, it provides the flexibility to treat multiple patients with variable vaginal diameters and sizes/depths of apical tumors using a single device.

3D printer-based novel intensity-modulated vaginal brachytherapy applicator: feasibility study

Purpose

To design a novel high-dose-rate intracavitary applicator which may lead to enhanced dose modulation in the brachytherapy of gynecological cancers.

Material and methods

A novel brachytherapy applicator, auxiliary equipment and quality control phantom were modeled in SketchUp Pro 2017 modeling software and printed out from a MakerBot Replicator Z18 three-dimensional printer. As a printing material polylactic acid (PLA) filament was used and compensator materials including aluminum, stainless-steel and Cerrobend alloy were selected according to their radiation attenuation properties. To evaluate the feasibility of the novel applicator, two sets of measurements were performed in a Varian GammaMed iX Plus high-dose rate iridium-192 (¹⁹²Ir) brachytherapy unit and all of the treatment plans were calculated in Varian BrachyVision treatment planning system v.8.9 with TG43-based formalism. In the first step, catheter and source-dwell positioning accuracy, reproducibility of catheter and source positions, linearity of relative dose with changing dwell times and compensator materials were tested to evaluate the mechanical stability of the designed applicator. In the second step, to validate the dosimetric accuracy of the novel applicator measured point dose and two-dimensional dose distributions in homogeneous medium were compared with calculated data in the treatment planning system using PTW VeriSoft v.5.1 software.

Results

In mechanical quality control tests source-dwell positioning accuracy and linearity of the designed applicator were measured as ≤ 0.5 mm and ≤ 1.5%, respectively. Reproducibility of the treatment planning was ≥ 97.7% for gamma evaluation criteria of 1 mm distance to agreement and 1% dose difference of local dose. In dosimetric quality control tests, maximum difference between measured and calculated point dose was found as 3.8% in homogeneous medium. In two-dimensional analysis, the number of passing points was greater than 90% for all measurements using gamma evaluation criteria of 3 mm distance to agreement and 3% dose difference of local dose.

Conclusions

The novel brachytherapy applicator met the necessary requirements in quality control tests.