Non-cross Bridge Viscoelastic Elements Contribute to Muscle Force and Work During Stretch-Shortening Cycles: Evidence From Whole Muscles and Permeabilized Fibers

Force re-development after shortening reveals a role for titin in stretch-shortening performance enhancement in skinned muscle fibres

Stretch-shortening cycles (SSCs) involve muscle lengthening (eccentric contractions) instantly followed by shortening (concentric contractions). This combination enhances force, work and power output compared with pure shortening contractions, which is known as the SSC effect. Recent evidence indicates both cross-bridge (XB)-based and non-XB-based (e.g. titin) structures contribute to this effect. This study analysed force re-development following SSCs and pure shortening contractions to gain further insight into the roles of XB and non-XB structures regarding the SSC effect. Experiments were conducted on rat soleus muscle fibres (n=16) with different SSC velocities (30%, 60% and 85% of maximum shortening velocity) and constant stretch-shortening magnitudes (18% of optimum length). The XB inhibitor blebbistatin was used to distinguish between XB and non-XB contributions to force generation. The results showed SSCs led to significantly greater [mean±s.d. 1.02±0.15 versus 0.68±0.09 (ΔF/Δt); t62=8.61, P<0.001, d=2.79) and faster (75 ms versus 205 ms; t62=-6.37, P<0.001, d=-1.48) force re-development compared with pure shortening contractions in the control treatment. In the blebbistatin treatment, SSCs still resulted in greater [0.11±0.03 versus 0.06±0.01 (ΔF/Δt); t62=8.00, P<0.001, d=2.24) and faster (3010±1631 versus 7916±3230 ms; t62=-8.00, P<0.001, d=-1.92) force re-development compared with pure shortening contractions. These findings deepen our understanding of the SSC effect, underscoring the involvement of non-XB structures such as titin in modulating force production. This modulation is likely to involve complex mechanosensory coupling from stretch to signal transmission during muscle contraction.

Linking in vivo muscle dynamics to force-length and force-velocity properties reveals that guinea fowl lateral gastrocnemius operates at shorter than optimal lengths

The isometric force-length (F-L) and isotonic force-velocity (F-V) relationships characterize the contractile properties of skeletal muscle under controlled conditions, yet it remains unclear how these properties relate to in vivo muscle function. Here, we map the in situ F-L and F-V characteristics of guinea fowl (Numida meleagris) lateral gastrocnemius (LG) to the in vivo operating range during walking and running. We test the hypothesis that muscle fascicles operate on the F-L plateau, near the optimal length for force (L0) and near velocities that maximize power output (Vopt) during walking and running. We found that in vivo LG velocities are consistent with optimizing power during work production, and economy of force at higher loads. However, LG does not operate near L0 at higher loads. LG length was near L0 at the time of electromyography (EMG) onset but shortened rapidly such that force development during stance occurred on the ascending limb of the F-L curve, around 0.8L0. Shortening across L0 in late swing might optimize potential for rapid force development near the swing-stance transition, providing resistance to unexpected perturbations that require rapid force development. We also found evidence of in vivo passive force rise in late swing, without EMG activity, at lengths where in situ passive force is zero, suggesting that dynamic viscoelastic effects contribute to in vivo force development. Comparison of in vivo operating ranges with F-L and F-V properties suggests the need for new approaches to characterize muscle properties in controlled conditions that more closely resemble in vivo dynamics.

Impact of lengthening velocity on the generation of eccentric force by slow-twitch muscle fibers in long stretches

After an initial increase, isovelocity elongation of a muscle fiber can lead to diminishing (referred to as Give in the literature) and subsequently increasing force. How the stretch velocity affects this behavior in slow-twitch fibers remains largely unexplored. Here, we stretched fully activated individual rat soleus muscle fibers from 0.85 to 1.3 optimal fiber length at stretch velocities of 0.01, 0.1, and 1 maximum shortening velocity, vmax, and compared the results with those of rat EDL fast-twitch fibers obtained in similar experimental conditions. In soleus muscle fibers, Give was 7%, 18%, and 44% of maximum isometric force for 0.01, 0.1, and 1 vmax, respectively. As in EDL fibers, the force increased nearly linearly in the second half of the stretch, although the number of crossbridges decreased, and its slope increased with stretch velocity. Our findings are consistent with the concept of a forceful detachment and subsequent crossbridge reattachment in the stretch's first phase and a strong viscoelastic titin contribution to fiber force in the second phase of the stretch. Interestingly, we found interaction effects of stretch velocity and fiber type on force parameters in both stretch phases, hinting at fiber type-specific differences in crossbridge and titin contributions to eccentric force. Whether fiber type-specific combined XB and non-XB models can explain these effects or if they hint at some not fully understood properties of muscle contraction remains to be shown. These results may stimulate new optimization perspectives in sports training and provide a better understanding of structure-function relations of muscle proteins.

The effects of muscle starting length on work loop power output of isolated mouse soleus and extensor digitorum longus muscle

Force-length relationships derived from isometric activations may not directly apply to muscle force production during dynamic contractions. As such, different muscle starting lengths between isometric and dynamic conditions could be required to achieve maximal force and power. Therefore, this study examined the effects of starting length [±5-10% of length corresponding to maximal twitch force (L0)] on work loop (WL) power output (PO), across a range of cycle frequencies, of the soleus (SOL) and extensor digitorum longus muscle (EDL; N=8-10) isolated from ∼8 week old C57 mice. Furthermore, passive work was examined at a fixed cycle frequency to determine the association of passive work and active net work. Starting length affected maximal WL PO of the SOL and EDL across evaluated cycle frequencies (P<0.030, ηp2>0.494). For the SOL, PO produced at -5% L0 was greater than that at most starting lengths (P<0.015, Cohen's d>0.6), except -10% L0 (P=0.135, d<0.4). However, PO produced at -10% L0 versus L0 did not differ (P=0.138, d=0.35-0.49), indicating -5% L0 is optimal for maximal SOL WL PO. For the EDL, WL PO produced at -10% L0 was lower than that at most starting lengths (P<0.032, d>1.08), except versus -5% L0 (P=0.124, d<0.97). PO produced at other starting lengths did not differ (P>0.163, d<1.04). For the SOL, higher passive work was associated with reduced PO (Spearman's r=0.709, P<0.001), but no relationship was observed between passive work and PO of the EDL (Pearson's r=0.191, r2=0.04, P=0.184). This study suggests that starting length should be optimised for both static and dynamic contractions and confirms that the force-length curve during dynamic contractions is muscle specific.

Biomechanics, motor control and dynamic models of the soft limbs of the octopus and other cephalopods

Muscular hydrostats are organs composed entirely of packed arrays of incompressible muscles and lacking any skeletal support. Found in both vertebrates and invertebrates, they are of great interest for comparative biomechanics from engineering and evolutionary perspectives. The arms of cephalopods (e.g. octopus and squid) are particularly interesting muscular hydrostats because of their flexibility and ability to generate complex behaviors exploiting elaborate nervous systems. Several lines of evidence from octopus studies point to the use of both brain and arm-embedded motor control strategies that have evolved to simplify the complexities associated with the control of flexible and hyper-redundant limbs and bodies. Here, we review earlier and more recent experimental studies on octopus arm biomechanics and neural motor control. We review several dynamic models used to predict the kinematic characteristics of several basic motion primitives, noting the shortcomings of the current models in accounting for behavioral observations. We also discuss the significance of impedance (stiffness and viscosity) in controlling the octopus's motor behavior. These factors are considered in light of several new models of muscle biomechanics that could be used in future research to gain a better understanding of motor control in the octopus. There is also a need for updated models that encompass stiffness and viscosity for designing and controlling soft robotic arms. The field of soft robotics has boomed over the past 15 years and would benefit significantly from further progress in biomechanical and motor control studies on octopus and other muscular hydrostats.

The distinctive mechanical and structural signatures of residual force enhancement in myofibers

In muscle, titin proteins connect myofilaments together and are thought to be critical for contraction, especially during residual force enhancement (RFE) when force is elevated after an active stretch. We investigated titin's function during contraction using small-angle X-ray diffraction to track structural changes before and after 50% titin cleavage and in the RFE-deficient, mdm titin mutant. We report that the RFE state is structurally distinct from pure isometric contractions, with increased thick filament strain and decreased lattice spacing, most likely caused by elevated titin-based forces. Furthermore, no RFE structural state was detected in mdm muscle. We posit that decreased lattice spacing, increased thick filament stiffness, and increased non-crossbridge forces are the major contributors to RFE. We conclude that titin directly contributes to RFE.

Use of animal models to understand titin physiology and pathology

In recent years, increasing attention has been paid to titin (TTN) and its mutations. Heterozygous TTN truncating variants (TTNtv) increase the risk of a cardiomyopathy. At the same time, TTNtv and few missense variants have been identified in patients with mainly recessive skeletal muscle diseases. The pathogenic mechanisms underlying titin‐related diseases are still partly unknown. Similarly, the titin mechanical and functional role in the muscle contraction are far from being exhaustively clarified. In the last few years, several animal models carrying variants in the titin gene have been developed and characterized to study the structural and mechanical properties of specific titin domains or to mimic patients' mutations. This review describes the main animal models so far characterized, including eight mice models and three fish models (Medaka and Zebrafish) and discusses the useful insights provided by a thorough characterization of the cell‐, tissue‐ and organism‐phenotypes in these models.

Active muscle stiffness is reduced during rapid unloading in muscles from TtnD112-158 mice with a large deletion to PEVK titin

Evidence suggests that the giant muscle protein, titin functions as a tunable spring in active muscle. However, the mechanisms for increasing titin stiffness with activation are not well understood. Previous studies have suggested that during muscle activation, titin binds to actin which engages the PEVK region of titin thereby increasing titin stiffness. In this study, we investigated the role of PEVK titin in active muscle stiffness during rapid unloading. We measured elastic recoil of active and passive soleus muscles from TtnD112-158 mice characterized by a 75% deletion of PEVK titin and increased passive stiffness. We hypothesized that activated TtnD112-158 muscles are more stiff than wild type muscles due to the increased stiffness of PEVK titin. Using a servomotor force lever, we compared the stress–strain relationships of elastic elements in active and passive muscles during rapid unloading and quantified the change in stiffness upon activation. Results show that the elastic modulus of TtnD112-158 muscles increased with activation. However, elastic elements developed force at 7% longer lengths and exhibited 50% lower active stiffness in TtnD112-158 soleus muscles than wild type muscles. Thus, despite having a shorter, stiffer PEVK segment, during rapid unloading, TtnD112-158 soleus muscles exhibited reduced active stiffness compared to wild type soleus muscles. These results are consistent with the idea that PEVK titin contributes to active muscle stiffness, however, the reduction in active stiffness of TtnD112-158 muscles suggests that other mechanisms compensate for the increased PEVK stiffness.

Fast stretching of skeletal muscle fibres abolishes residual force enhancement

The steady-state isometric force of a muscle after active stretching is greater than the steady-state force for a purely isometric contraction at the same length and activation level. The mechanisms underlying this property, termed residual force enhancement (rFE), remain unknown. When myofibrils are actively stretched while cross-bridge cycling is inhibited, rFE is substantially reduced, suggesting that cross-bridge cycling is essential to produce rFE. Our purpose was to further investigate the role of cross-bridge cycling in rFE by investigating whether fast stretching that causes cross-bridge slipping is associated with a loss of rFE. Skinned fibre bundles from rabbit psoas muscles were stretched slowly (0.08 µm s-1) or rapidly (800 µm s-1) while activated, from an average sarcomere length of 2.4 to 3.2 µm. Force was enhanced by 38%±4% (mean±s.e.m) after the slow stretches but was not enhanced after the fast stretches, suggesting that proper cross-bridge cycling is required to produce rFE.

Effect of stimulation frequency on force, power, and fatigue of isolated mouse extensor digitorum longus muscle

This study examined the effect of stimulation frequency (140, 200, 230 and 260 Hz) on isometric force, work loop (WL) power, and the fatigue resistance of extensor digitorum longus (EDL) muscle (n=32), isolated from 8-10-week-old CD-1 female mice. Stimulation frequency had significant effects on isometric properties of isolated mouse EDL, whereby increasing stimulation frequency evoked increased isometric force, quicker activation, and prolonged relaxation (P <0.047), until 230 Hz and above, thereafter force and activation did not differ (P >0.137). Increasing stimulation frequency increased maximal WL power output (P <0.001; 140 Hz, 71.3±3.5; 200 Hz, 105.4±4.1; 230 Hz, 115.5±4.1; 260 Hz, 121.1±4.1 W.kg-1), but resulted in significantly quicker rates of fatigue during consecutive WL's (P <0.004). WL shapes indicate impaired muscle relaxation at the end of shortening and subsequent increased negative work appeared to contribute to fatigue at 230 and 260 Hz, but not at lower stimulation frequencies. Cumulative work was unaffected by stimulation frequency, except at the start of fatigue protocol where 230 and 260 Hz produced more work than 140 Hz (P <0.039). We demonstrate that stimulation frequency affects force, power, and fatigue, but effects are not uniform between different assessments of contractile performance. Therefore, future work examining contractile properties of isolated skeletal muscle should consider increasing stimulation frequency beyond that needed for maximal force when examining maximal power but utilise a sub-maximal stimulation frequency for fatigue assessments to avoid high degree of negative work atypical of in vivo function.

Effect of Active Lengthening and Shortening on Small-Angle X-ray Reflections in Skinned Skeletal Muscle Fibres

Our purpose was to use small-angle X-ray diffraction to investigate the structural changes within sarcomeres at steady-state isometric contraction following active lengthening and shortening, compared to purely isometric contractions performed at the same final lengths. We examined force, stiffness, and the 1,0 and 1,1 equatorial and M3 and M6 meridional reflections in skinned rabbit psoas bundles, at steady-state isometric contraction following active lengthening to a sarcomere length of 3.0 µm (15.4% initial bundle length at 7.7% bundle length/s), and active shortening to a sarcomere length of 2.6 µm (15.4% bundle length at 7.7% bundle length/s), and during purely isometric reference contractions at the corresponding sarcomere lengths. Compared to the reference contraction, the isometric contraction after active lengthening was associated with an increase in force (i.e., residual force enhancement) and M3 spacing, no change in stiffness and the intensity ratio I_1,1/I_1,0, and decreased lattice spacing and M3 intensity. Compared to the reference contraction, the isometric contraction after active shortening resulted in decreased force, stiffness, I_1,1/I_1,0, M3 and M6 spacings, and M3 intensity. This suggests that residual force enhancement is achieved without an increase in the proportion of attached cross-bridges, and that force depression is accompanied by a decrease in the proportion of attached cross-bridges. Furthermore, the steady-state isometric contraction following active lengthening and shortening is accompanied by an increase in cross-bridge dispersion and/or a change in the cross-bridge conformation compared to the reference contractions.