Hi-Fi Stake Piezo Single Crystal Actuator

Achieving Giant Piezoelectricity and High Property Uniformity Simultaneously in a Relaxor Ferroelectric Crystal through Rare-Earth Element Doping

The low uniformity in properties of relaxor ferroelectric crystals is a long-standing issue in the ferroelectric community, which limits the available volume of the entire crystal boule. The aim of this study is to develop a relaxor ferroelectric crystal with improved property uniformity and excellent piezoelectricity. To this end, Pb(In_1/2 Nb_1/2 )O₃ -Pb(Mg_1/3 Nb_2/3 )O₃ -PbTiO₃ is doped with Nd₂ O₃ (Nd-PIN-PMN-PT) to improve the crystal performance. Along the crystal boule, the piezoelectric coefficient d₃₃ varies from 2800 to 3500 pC N^-1 , and the dielectric constant ranges from 8400 to 9800, with variations of 25% and 16%, respectively. Such high property uniformity results in over 75% available volume of the crystal boule, compared to 30-50% for undoped crystals grown by Bridgman method. At the electric field of 1 kV cm^-1 , the converse piezoelectric response is up to 4780 pm V^-1 . In addition, its Curie temperature (T_C ) and coercive field (E_C ) are above 150 °C and 3 kV cm^-1 , respectively. Compared with Pb(Mg_1/3 Nb_2/3 )O₃ -PbTiO₃ crystal (d₃₃ : 1500 pC N^-1 , T_C : 135 °C, E_C : 2.3 kV cm^-1 ), the larger piezoelectricity, the higher T_C and E_C , and improved uniformity make Nd-PIN-PMN-PT crystals promising candidates for advanced piezoelectric applications.

Analytical Modeling and Simulation of S-Drive Piezoelectric Actuators

This paper presents a structural geometry for increasing piezoelectric deformation, which is suitable for both micro- and macro-scale applications. New and versatile microstructure geometries for actuators can improve device performance, and piezoelectric designs benefit from a high-frequency response, power density, and efficiency, making them a viable choice for a variety of applications. Previous works have presented piezoelectric structures capable of this amplification, but few are well-suited to planar manufacturing. In addition to this manufacturing difficulty, a large number of designs cannot be chained into longer elements, preventing them from operating at the macro-scale. By optimizing for both modern manufacturing techniques and composability, this structure excels as an option for a variety of macro- and micro-applications. This paper presents an analytical compact model of a novel dual-bimorph piezoelectric structure, and shows that this compact model is within 2% of a computer-distributed element model. Furthermore it compares the actuator’s theoretical performance to that of a modern actuator, showing that this actuator trades mechanical efficiency for compactness and weight savings.

High-Bending-Stiffness Connector (HBSC) and High-Authority Piezoelectric Actuator (HAPA) Made of Such

High-authority piezoelectric actuator (HAPA) is a term used to describe high-performance piezoelectric actuators of relatively large displacement (≥50 μm) and high blocking force (≥100 N), but compact in size. One such piezoelectric actuator is described in this paper, which is made possible by means of high-bending-stiffness connector (HBSC) that connects multiple commercial piezoceramic stacks into a stable 2- (or multi-) level actuation configuration. Key design requirements for the HBSC are described. Computer simulation results and experimental verification are presented. A HAPA-(2 + 2) actuator was fabricated from such a HBSC, in which there are two commercial PZT stacks projecting upwards in the upper level and two projecting downwards in the lower lever, all of 5 × 5 mm2 in cross-section and 40 mm in length. The HAPA-(2 + 2) actuator prototype displays about twice the overall stroke and blocking force of individual stacks, being about 90 μm and >1600 N, respectively. This compares favorably with lever-arm, flextensional, and telescopic actuators, of which the blocking force is adversely affected. Using a similar concept, HBSCs and HAPAs of other designs are presented. In addition to being stand-alone actuators, the HAPAs can be used as the active material to drive existing displacement amplification schemes to produce piezoelectric actuators of exceptional performance characteristics.