On-Board Pneumatic Pressure Generation Methods for Soft Robotics Applications

Chemically Driven Oscillating Soft Pneumatic Actuation

Pneumatic actuators are widely studied in soft robotics as they are facile, low cost, scalable, and robust and exhibit compliance similar to many systems found in nature. The challenge is to harness high energy density chemical and biochemical reactions that can generate sufficient pneumatic pressure to actuate soft systems in a controlled and ecologically compatible manner. This investigation evaluates the potential of chemical reactions as both positive and negative pressure sources for use in soft robotic pneumatic actuators. Considering the pneumatic actuation demands, the chemical mechanisms of the pressure sources, and the safety of the system, several gas evolution/consumption reactions are evaluated and compared. Furthermore, the novel coupling of both gas evolution and gas consumption reactions is discussed and evaluated for the design of oscillating systems, driven by the complementary evolution and consumption of carbon dioxide. Control over the speed of gas generation and consumption is achieved by adjusting the initial ratios of feed materials. Coupling the appropriate reactions with pneumatic soft-matter actuators has delivered autonomous cyclic actuation. The reversibility of these systems is demonstrated in a range of displacement experiments, and practical application is shown through a soft gripper that can move, pick up, and let go of objects. Our approach presents a significant step toward more autonomous, versatile soft robots driven by chemo-pneumatic actuators.

What is an artificial muscle? A comparison of soft actuators to biological muscles

Interest in emulating the properties of biological muscles that allow for fast adaptability and control in unstructured environments has motivated researchers to develop new soft actuators, often referred to as 'artificial muscles'. The field of soft robotics is evolving rapidly as new soft actuator designs are published every year. In parallel, recent studies have also provided new insights for understanding biological muscles as 'active' materials whose tunable properties allow them to adapt rapidly to external perturbations. This work presents a comparative study of biological muscles and soft actuators, focusing on those properties that make biological muscles highly adaptable systems. In doing so, we briefly review the latest soft actuation technologies, their actuation mechanisms, and advantages and disadvantages from an operational perspective. Next, we review the latest advances in understanding biological muscles. This presents insight into muscle architecture, the actuation mechanism, and modeling, but more importantly, it provides an understanding of the properties that contribute to adaptability and control. Finally, we conduct a comparative study of biological muscles and soft actuators. Here, we present the accomplishments of each soft actuation technology, the remaining challenges, and future directions. Additionally, this comparative study contributes to providing further insight on soft robotic terms, such as biomimetic actuators, artificial muscles, and conceptualizing a higher level of performance actuator named artificial supermuscle. In conclusion, while soft actuators often have performance metrics such as specific power, efficiency, response time, and others similar to those in muscles, significant challenges remain when finding suitable substitutes for biological muscles, in terms of other factors such as control strategies, onboard energy integration, and thermoregulation.

Soft Robotic Gripper Based on Multi-Layers of Dielectric Elastomer Actuators

Dielectric elastomer actuators (DEAs) are a promising technology for soft robotics. The use of DEAs has many advantages, including light weight, resilience, and fast response for its applications, such as grippers, artificial muscles, and heel strike generators. Grippers are commonly used as grasping devices. In this study, we focus on DEA applications and propose a technology to expand the applicability of a soft gripper. The advantages of gripper-based DEAs include light weight, fast response, and low cost. We fabricated soft grippers using multiple DEA layers. The grippers successfully held or gripped an object, and we investigated the response time of the grippers and their angle characteristics. We studied the relationship between the number of DEA layers and the performance of our grippers. Our experimental results show that the multi-layered DEAs have the potential to be strong grippers.

Fluid-Structure Interaction Modelling of a Soft Pneumatic Actuator

This paper presents a fully coupled fluid-structure interaction (FSI) simulation model of a soft pneumatic actuator (SPA). Previous research on modelling and simulation of SPAs mostly involves finite element modelling (FEM), in which the fluid pressure is considered as pressure load uniformly acting on the internal walls of the actuator. However, FEM modelling does not capture the physics of the fluid flow inside an SPA. An accurate modelling of the physical behaviour of an SPA requires a two-way FSI analysis that captures and transfers information from fluid to solid and vice versa. Furthermore, the investigation of the fluid flow inside the flow channels and chambers of the actuator are vital for an understanding of the fluid energy distribution and the prediction of the actuator performance. The FSI modelling is implemented on a typical SPA and the flow behaviour inside the actuator is presented. Moreover, the bending behaviour of the SPA from the FSI simulation results is compared with a corresponding FEM simulation.

Transient Dynamic System Behavior of Pressure Actuated Cellular Structures in a Morphing Wing

High aspect ratio aircraft have a significantly reduced induced drag, but have only limited installation space for control surfaces near the wingtip. This paper describes a multidisciplinary design methodology for a morphing aileron that is based on pressure-actuated cellular structures (PACS). The focus of this work is on the transient dynamic system behavior of the multi-functional aileron. Decisive design aspects are the actuation speed, the resistance against external loads, and constraints preparing for a future wind tunnel test. The structural stiffness under varying aerodynamic loads is examined while using a reduced-order truss model and a high-fidelity finite element analysis. The simulations of the internal flow investigate the transient pressurization process that limits the dynamic actuator response. The authors present a reduced-order model based on the Pseudo Bond Graph methodology enabling time-efficient flow simulation and compare the results to computational fluid dynamic simulations. The findings of this work demonstrate high structural resistance against external forces and the feasibility of high actuation speeds over the entire operating envelope. Future research will incorporate the fluid–structure interaction and the assessment of load alleviation capability.

Toward a Gecko-Inspired, Climbing Soft Robot

In this paper, we present a gecko-inspired soft robot that is able to climb inclined, flat surfaces. By changing the design of the previous version, the energy consumption of the robot could be reduced, and at the same time, its ability to climb and its speed of movement could be increased. As a result, the new prototype consumes only about a third of the energy of the previous version and manages to climb slopes of up to 84°. In the horizontal plane, its velocity could be increased from 2 to 6 cm/s. We also provide a detailed analysis of the robot's straight gait.

Recycling-Oriented Design in Soft Robotics

Soft robotics is a novel approach in the field of robotics. Soft robots or soft actuators are typically polymer-based and are characterized by their flexibility and adaptability, which brings new far-reaching applications. Soft robotics is currently at the peak of its research. One circumstance that is also present in this age is constant climate change; there is a demand for sustainability. This goes hand in hand with the design of products that are suitable for recycling. Today, more is expected of an engineer than just function-oriented design. This article looks at soft robotics from the point of view of sustainability. Since nature operates in cycles, the aim is to design products in such a way that they can be introduced into cycles. Three recycling cycles for products can be distinguished, which take place during production, during product use, and after product life. Within the framework of this work, special design measures are reviewed for fluidic elastomer actuators—a characteristic type of soft actuators—so that they can be integrated into the recycling process.