An Open-Hardware Insemination Device for Small-Bodied Live-Bearing Fishes to Support Development and Use of Germplasm Repositories

Exploring pathways toward open-hardware ecosystems to safeguard genetic resources for biomedical research communities using aquatic model species

Development of reliable germplasm repositories is critical for preservation of genetic resources of aquatic species, which are widely utilized to support biomedical innovation by providing a foundational source for naturally occurring variation and development of new variants through genetic manipulations. A significant barrier in repository development is the lack of cryopreservation capability and reproducibility across the research community, posing great risks of losing advances developed from billions of dollars of research investment. The emergence of open scientific hardware has fueled a new movement across biomedical research communities. With the increasing accessibility of consumer-level fabrication technologies, such as three-dimensional printers, open hardware devices can be custom designed, and design files distributed to community members for enhancing rigor, reproducibility, and standardization. The overall goal of this review is to explore pathways to create open-hardware ecosystems among the communities using aquatic model resources for biomedical research. To gain feedback and insights from community members, an interactive workshop focusing on open-hardware applications in germplasm repository development was held at the 2022 Aquatic Models for Human Disease Conference, Woods Hole, Massachusetts. This work integrates conceptual strategies with practical insights derived from workshop interactions using examples of germplasm repository development. These insights can be generalized for establishment of open-hardware ecosystems for a broad biomedical research community. The specific objectives were to: (1) introduce an open-hardware ecosystem concept to support biomedical research; (2) explore pathways toward open-hardware ecosystems through four major areas, and (3) identify opportunities and future directions.

An automated modular open-technology device to measure and adjust concentration of aquatic sperm samples for cryopreservation

Repositories for aquatic germplasm are essential for safeguarding valuable genetic diversity for species relevant to aquaculture, biomedical research, and conservation. Development of aquatic germplasm repositories is impeded by a lack of standardization within laboratories and across the research community. Protocols for cryopreservation are often developed ad hoc and without close attention to variables, such as cell concentration, that strongly affect the success and reproducibility of cryopreservation. The wide dissemination and use of specialized tools and devices as open hardware can improve processing reliability and save costs. The goal of the present work was to develop and prototype a modular and open-technology approach to help to standardize the cell concentration of germplasm samples prior to cryopreservation. The specific objectives were to: 1) design and fabricate prototypes of the automated concentration measurement and adjustment system (CMAS), incorporating custom peristaltic pumps and optical evaluation modules, and 2) evaluate the performance of the CMAS with biological samples. Linear regression models were obtained for estimation of aquatic sperm concentration >108 cells/mL and for algae concentration > (3 × 105) cells/mL. Algae were diluted with extender medium by an automated process, resulting in a dilution precision of ±12.6% and ±6.7% in two trials, attaining means of 89% and 71% of the target cell concentration. The development of the CMAS as open technology can provide opportunities for community-level standardization in cryopreservation of aquatic germplasm and can invite new users, makers, and developers into the open-technology community. This will increase the reach and capabilities of much-needed aquatic germplasm repositories.

Development of a Single-Piece Sperm Counting Chamber (SSCC) for Aquatic Species

Accurate determination of sperm concentration in aquatic species is important for assisted reproduction and cryopreservation, yet is challenging as current counting methods are costly or not suitable for many species. The goal of this work was to develop a simple (single-piece and single-layer photolithography) sperm counting chamber (SSCC) for aquatic species. Goldfish (Carassius auratus) and zebrafish (Danio rerio) sperm were used for evaluation in the device, which was created with soft lithography. Four designs with different geometries were evaluated for counting accuracy. Open-corner and open-midpoint designs were the most accurate with no significant differences (P > 0.05) for most of the target sperm concentrations (0.5-1.0 × 108 cells/mL). The open-corner design was not significantly different from the Makler® counting chamber intended for human sperm cells (P = 0.6) but was significantly different from a hemocytometer (P < 0.001) intended for other cell sizes. Material cost of device production was USD 16 per unit, including photolithography supplies, glass slide and coverslip, and polydimethylsiloxane. The cost can be reduced to USD 2 per unit with repeated wafer casts. This device could be further refined for resin 3-D printing and sharing via open-hardware approaches and modified to best suit species specific applications.

A 3-D printed vitrification device integrated with French straws

The goal of this work was to develop prototypes of open-hardware vitrification devices for sperm cryopreservation that can be integrated with existing straw platforms. The open-hardware Vitrification Device for French Straws (VD-FS) is low-cost, customizable, 3-D printable, standardized, and allows long-term sample storage and identification. The feasibility was shown for vitrifying and storing samples with multiple configurations. The results can be improved by design alternation and evaluation of various vitrification solutions. This is the first complete open-hardware vitrification device that can be integrated with existing French-straw storage systems, providing a foundation for future community-level modifications and improvements.

Cryopreservation of Hydractinia symbiolongicarpus Sperm to Support Community-Based Repository Development for Preservation of Genetic Resources

Hydractinia symbiolongicarpus is an emerging model organism in which cutting-edge genomic tools and resources are being developed for use in a growing number of research fields. One limitation of this model system is the lack of long-term storage for genetic resources. The goal of this study was to establish a generalizable cryopreservation approach for Hydractinia that would support future repository development for other cnidarian species. Specific objectives were to: (1) characterize basic parameters related to sperm quality; (2) develop a generalizable approach for sperm collection; (3) assess the feasibility of in vitro fertilization (IVF) with sperm after refrigerated storage; (4) assess the feasibility of IVF with sperm cryopreserved with various sperm concentrations; (5) evaluate feasibility of cryopreservation with various freezing conditions, and (6) explore the feasibility of cryopreservation by use of a 3-D printed open-hardware (CryoKit) device. Animal husbandry and sperm collection were facilitated by use of 3-D printed open hardware. Hydractinia sperm at a concentration of 2 × 107 cells/mL stored at 4 °C for 6 d were able to achieve 50% fertilization rate. It appeared that relatively higher sperm concentration (>5 × 107 cells/mL) for cryopreservation could promote fertilization. A fertilization rate of 41−69% was observed using sperm equilibrated with 5, 10, or 15% (v/v) cryoprotectant (dimethyl sulfoxide or methanol) for 20 min, cooled at a rate of 5, 10, or 20 °C/min from 4 °C to −80 °C, at a cell concentration of 108/mL, in 0.25 mL French straws. Samples cryopreserved with the CryoKit produced a fertilization rate of 72−82%. Establishing repository capabilities for the Hydractinia research community will be essential for future development, maintenance, protection, and distribution of genetic resources. More broadly, these generalizable approaches can be used as a model to develop germplasm repositories for other cnidarian species.