Production of Genetically Modified Porcine Embryos via Lipofection of Zona-Pellucida-Intact Oocytes Using the CRISPR/Cas9 System

Optimization of lipofection protocols for CRISPR/Cas9 delivery in porcine zona pellucida intact oocytes: A study of coincubation duration and reagent efficacy

A priority to facilitate the application of lipofection to generate genetically modified porcine embryos and animals will be the use of zona pellucida (ZP)-intact oocytes and zygotes. Recently, our group produced genetically modified embryos by lipofection of ZP-intact oocytes during in vitro fertilization (IVF). This study investigates the effect of two commercial lipofection reagents, Lipofectamine 3000 and Lipofectamine CRISPRMAX, on embryo development and mutation efficiency in ZP-intact porcine oocytes. We compared these reagents with the electroporation method and a control group using two sgRNAs targeting the CAPN3 and CD163 genes. The detrimental effects on cleavage rates were observed in both lipofection treatments compared to the control and electroporated groups. However, blastocyst rates were higher in the Lipofectamine 3000 group than in the electroporated group for both genes. Mutation parameters varied by target gene, with Lipofectamine 3000 achieving higher mutation rates for CD163, while all groups were similar for the CAPN3 gene. Overall efficiency was similar for both lipofectamines, confirming their feasibility for use. In addition, we evaluated the effect of coincubation time (4, 8, and 24 h) on IVF outcomes, embryo development, and mutation parameters. Results indicated that an 8-h coincubation period optimized fertilization and mutation efficiency without significant toxic effects. This study demonstrates that lipofection with either Lipofectamine 3000 or CRISPRMAX during IVF is an effective method for generating genetically modified porcine embryos without the need for specialized equipment or trained personnel, with efficiencies similar to or greater than electroporation. This study also highlights the importance of optimizing reagent selection and coincubation times. There is no difference between Lipofectamine 3000 and CRISPRMAXTM in terms of embryo development and mutation efficiency, and under our experimental conditions, the optimal coincubation time with lipofectamine is 8 h.

Evaluation of culture methods and chemical reagent combinations on CRISPR/Cas9 gene editing systems by lipofection in pig zygotes

The delivery of CRISPR/Cas ribonucleoprotein (RNP) complexes is gaining attention owing to its high cleavage efficiency and reduced off-target effects. Although RNPs can be delivered into porcine zygotes via electroporation with relatively high efficiency, lipofection-mediated transfection appears to be versatile because of its ease of use, low cost, and adaptation to high-throughput systems. However, this system requires improvements in terms of embryo development and mutation rates. Therefore, this study elucidated the effects of culture methods and reagent combinations on the CRISPR/Cas9 gene editing systems by using three lipofection reagents: Lipofectamine™ CRISPRMAX™ Cas9 Transfection Reagent (CM), Lipofectamine™ 2000 Transfection Reagent (LP), and jetCRISPR™ RNP Transfection Reagent (Jet). Porcine zona pellucida-free zygotes were incubated for 5 h with Cas9, a guide RNA targeting CD163, and the above lipofection reagents. When examining the effect of culture methods using 4-well (multiple embryo culture) and 25-well plates (single embryo culture) on the efficiency of CM-mediated zygote transfection, the culture of embryos in 25-well plates significantly increased the blastocyst formation rate; however, there was no difference in mutation rates between the 4-well and 25-well plates. When assessing the effects of individual or combined reagents on the efficiency of zygote transfection, the mutation rate was significantly lower for individual LP compared to individual CM- and Jet-mediated transfections. Moreover, combinations of lipofection transfection reagents did not significantly increase the mutation rate or mutation efficiency.

Oocyte electroporation prior to in vitro fertilization is an efficient method to generate single, double, and multiple knockout porcine embryos of interest in biomedicine and animal production

Genetically modified pigs play a critical role in mimicking human diseases, xenotransplantation, and the development of pigs resistant to viral diseases. The use of programmable endonucleases, including the CRISPR/Cas9 system, has revolutionized the generation of genetically modified pigs. This study evaluates the efficiency of electroporation of oocytes prior to fertilization in generating edited gene embryos for different models. For single gene editing, phospholipase C zeta (PLC ζ) and fused in sarcoma (FUS) genes were used, and the concentration of sgRNA and Cas9 complexes was optimized. The results showed that increasing the concentration resulted in higher mutation rates without affecting the blastocyst rate. Electroporation produced double knockouts for the TPC1/TPC2 genes with high efficiency (79 %). In addition, resistance to viral diseases such as PRRS and swine influenza was achieved by electroporation, allowing the generation of double knockout embryo pigs (63 %). The study also demonstrated the potential for multiple gene editing in a single step using electroporation, which is relevant for xenotransplantation. The technique resulted in the simultaneous mutation of 5 genes (GGTA1, B4GALNT2, pseudo B4GALNT2, CMAH and GHR). Overall, electroporation proved to be an efficient and versatile method to generate genetically modified embryonic pigs, offering significant advances in biomedical and agricultural research, xenotransplantation, and disease resistance. Electroporation led to the processing of numerous oocytes in a single session using less expensive equipment. We confirmed the generation of gene-edited porcine embryos for single, double, or quintuple genes simultaneously without altering embryo development to the blastocyst stage. The results provide valuable insights into the optimization of gene editing protocols for different models, opening new avenues for research and applications in this field.

Optimizing oocyte electroporation for genetic modification of porcine embryos: Evaluation of the parthenogenetic activation

In reproductive biology, understanding the effects of novel techniques on early embryo development is of paramount importance. To date, the effects of electrical activation on oocytes prior to in vitro fertilization (IVF) are not well understood. The aim of this study was to investigate the effects of oocyte electroporation prior to IVF on embryo development and to differentiate between true embryos and parthenotes by using a TPCN2 knock-out (KO) male to evaluate the presence of the KO allele in the resulting blastocysts. The study consisted of three experiments. The first one examined oocyte electroporation with and without subsequent IVF and found that electroporated oocytes had higher activation rates, increased occurrence of a single pronucleus, and no effect on sperm penetration. Cleavage rates improved in electroporated oocytes, but blastocyst rates remained constant. Genotype analysis revealed a significant increase in the proportion of parthenotes in the electroporated groups compared to the IVF control (30.2 % vs. 6.8 %). The second experiment compared two electroporation media, Opti-MEM and Nuclease-Free Duplex Buffer (DB). DB induced higher oocyte degeneration rates, and lower cleavage and blastocyst rates than Opti-MEM, while parthenogenetic formation remained consistent (60.0 and 48.5 %). In the third experiment, the timing of electroporation relative to IVF was evaluated (1 h before IVF, immediately before IVF and 7 h after IVF). Electroporation immediately before IVF resulted in higher activation rates and different pronuclear proportions compared to the other timing groups. The penetration rate was higher in the immediate electroporation group, and cleavage rate improved in all electroporated groups compared to the control. Blastocyst rates remained constant. Genotyping revealed no significant differences in parthenote proportions among the timing groups, but these were higher than the control (56.25 %, 63.89 %, 51.61 %, 2.44 %, respectively), and showed higher mutation rates when electroporation was performed 7 h after IVF. Overall, this comprehensive study sheds light on the potential of electroporation for creating genetically modified embryos and the importance of media selection and timing in the process, the best media being the Opti-MEM and the more efficient timing regarding mutation rate, 7 h post-IVF, even when the parthenote formation did not differ among electroporated groups. Further studies are needed to reduce the parthenogenetic activation while maintaining high mutation rates to optimize the use of this procedure for the generation of gene-edited pig embryos by oocyte/zygote electroporation.

Comparison of ICSI, IVF, and in vivo derived embryos to produce CRISPR-Cas9 gene-edited pigs for xenotransplantation

Genome editing in pigs for xenotransplantation has seen significant advances in recent years. This study compared three methodologies to generate gene-edited embryos, including co-injection of sperm together with the CRISPR-Cas9 system into oocytes, named ICSI-MGE (mediated gene editing); microinjection of CRISPR-Cas9 components into oocytes followed by in vitro fertilization (IVF), and microinjection of in vivo fertilized zygotes with the CRISPR-Cas9 system. Our goal was to knock-out (KO) porcine genes involved in the biosynthesis of xenoantigens responsible for the hyperacute rejection of interspecific xenografts, namely GGTA1, CMAH, and β4GalNT2. Additionally, we attempted to KO the growth hormone receptor (GHR) gene with the aim of limiting the growth of porcine organs to a size that is physiologically suitable for human transplantation. Embryo development, pregnancy, and gene editing rates were evaluated. We found an efficient mutation of the GGTA1 gene following ICSI-MGE, comparable to the results obtained through the microinjection of oocytes followed by IVF. ICSI-MGE also showed higher rates of biallelic mutations compared to the other techniques. Five healthy piglets were born from in vivo-derived embryos, all of them exhibiting biallelic mutations in the GGTA1 gene, with three displaying mutations in the GHR gene. No mutations were observed in the CMAH and β4GalNT2 genes. In conclusion, in vitro methodologies showed high rates of gene-edited embryos. Specifically, ICSI-MGE proved to be an efficient technique for obtaining homozygous biallelic mutated embryos. Lastly, only live births were obtained from in vivo-derived embryos showing efficient multiple gene editing for GGTA1 and GHR.

Comparison of chemically mediated CRISPR/Cas9 gene editing systems using different nonviral vectors in porcine embryos

The transfection efficiency of clustered regularly interspaced short palindromic repeats (CRISPR)/Cas ribonucleoprotein complexes was compared using three nonviral vector transfection reagents: nonliposomal polymeric (TransIT-X2), lipid nanoparticle delivery (CRISPRMAX), and peptide (ProteoCarry) systems. Porcine zona pellucida-free zygotes and embryos were incubated for 5 h with CRISPR-associated protein 9 (Cas9), guide RNA (gRNA) targeting GGTA1, and one of the reagents. In Experiment 1, optimization of Cas9 protein to gRNA molar ratios of 1:2, 2:2, and 4:2, along with single or double doses of reagents, was performed on zygotes at 10 h post-in vitro fertilization. In Experiment 2, optimization of timing was performed at 10 or 29 h post-in vitro fertilization, using optimal molar ratios and reagent doses. Blastocyst formation, mutation rates, and mutation efficiency were measured in each experiment. For each reagent, a 4:2 Cas9:gRNA molar ratio and addition of a double reagent dose exhibited a higher mutation rate; however, blastocyst rate tended to decrease compared with that of control. Moreover, the optimal transfection time varied depending on the reagent, and the proportions of blastocysts carrying mutations were <34%. In conclusion, the above three transfectants allowed gene editing of porcine zygotes and embryos; however, this newly established chemistry-based technology needs further improvement, especially regarding editing efficiency and embryo development.