Facile Sonochemical Preparation of Au-ZrO2 Nanocatalyst for the Catalytic Reduction of 4-Nitrophenol

Pd nanoparticles decorated on Schiff base-modified chitosan/CeO2 as a heterogeneous and retriable nanocatalyst for Heck reactions and remediation of environmental pollutants

In this paper, we have developed a novel, highly active, eco-friendly, and versatile heterogeneous catalyst system in which Pd nanoparticles are decorated on Schiff base-modified chitosan‑cerium oxide particles (Pd@CS-CeO₂). In order to confirm the successful fabrication of Pd@CS-CeO₂, FTIR, XRD, SEM, TEM, BET, TG/DTG, and EDS analyses were performed, and its performance was evaluated as a heterogeneous nanocatalyst in Heck coupling reaction and reduction of nitro compounds. The catalytic tests showed that the desired Heck products were readily produced by Pd@CS-CeO₂ without being contaminated with the aryl iodides, bromides, and chlorides. Moreover, different nitro compounds were efficiently reduced to corresponding amino compounds by Pd@CS-CeO₂ within 95-160 s. Thanks to the heterogeneous nature of Pd@CS-CeO₂ catalyst, it was easily recovered via simple filtration and reused up to 5 successive runs by giving 88 % yield. Due to its good catalytic and reusability performance together with stability/durability, Pd@CS-CeO₂ is promising candidate as a catalyst for various catalytic or organic reactions.

New Carbamoyl Surface-Modified ZrO2 Nanohybrids for Selective Au Extraction from E-Waste

Efficient and selective extractions of precious and critical metal ions such as Au(III) and Pd(II) were investigated using zirconia nanoparticles surface modified with different organic mono- and di-carbamoyl phosphonic acid ligands. The modification is made on the surface of commercial ZrO₂ that is dispersed in aqueous suspension and was achieved by optimizing the Bronsted acid-base reaction in ethanol/H₂O solution (1:2), resulting in inorganic-organic systems of ZrO₂-Lⁿ (Lⁿ: organic carbamoyl phosphonic acid ligand). The presence, binding, amount, and stability of the organic ligand on the surface of zirconia nanoparticles were confirmed by different characterizations such as TGA, BET, ATR-FTIR, and ³¹P-NMR. Characterizations showed that all the prepared modified zirconia had a similar specific surface area (50 m².g^-1) and the same amount of ligand on the zirconia surface in a 1:50 molar ratio. ATR-FTIR and ³¹P-NMR data were used to elucidate the most favorable binding mode. Batch adsorption results showed that (i) ZrO₂ surface modified with di-carbamoyl phosphonic acid ligands had the highest adsorption efficiency to extract metals than mono-carbamoyl ligands, and (ii) higher hydrophobicity of the ligand led to better adsorption efficiency. The surface-modified ZrO₂ with di-N,N-butyl carbamoyl pentyl phosphonic acid ligand (ZrO₂-L⁶) showed promising stability, efficiency, and reusability in industrial applications for selective gold recovery. In terms of thermodynamic and kinetic adsorption data, ZrO₂-L⁶ fits the Langmuir adsorption model and pseudo-second-order kinetic model for the adsorption of Au(III) with maximum experimental adsorption capacity q_max = 6.4 mg.g^-1.

Catalytic Reduction of p-Nitrophenol on MnO2/Zeolite -13X Prepared with Lawsonia inermis Extract as a Stabilizing and Capping Agent

p-nitrophenol (pNP) is a highly toxic organic compound and is considered carcinogenic and mutagenic. It is a very stable compound with high resistance to chemical or biological degradation. As a result, the elimination of this pollutant has been very challenging for many researchers. Catalytic reduction is one of the most promising techniques, if a suitable catalyst is developed. Thus, this work aims to prepare an eco-friendly catalyst via a simple and low-cost route and apply it for the conversion of the toxic p-nitrophenol (pNP) into a non-toxic p-aminophenol (pAP) that is widely used in industry. Manganese oxide was prepared in an environmentally friendly manner with the aid of Lawsonia inermis (henna) extract as a stabilizing and capping agent and loaded on the surface of 13X molecular sieve zeolite. The UV-Vis spectrum, EDS, and XRD patterns confirmed the formation of the pure MnO₂ loaded on the zeolite crystalline network. The TGA analysis showed that the samples prepared by loading MnO₂ on zeolite (Mn2Z, Mn3Z, and Mn4Z) lost more mass than pure MnO₂ (Mn) or zeolite (Z), which is mainly moisture adsorbed on the surface. This indicates a better dispersion of MnO₂ on the surface of zeolite compared to pure MnO₂, and thus a higher number of active adsorption sites. SEM images and EDS confirmed the dispersion of the MnO₂ on the surface of the zeolite. Results showed a very fast reduction rate, following the order Mn2Z > Mn3Z > Mn4Z > Mn > Z. With sample Mn2Z, 96% reduction of pNP was achieved in 9 min and 100% in 30 min. For Mn3Z, Mn4Z, and Mn, 98% reduction was achieved in 20 min and 100% in 30 min. Zeolite was the slowest, with only a 40% reduction in 30 min. Increasing the amount of zeolite in the synthesis mixture resulted in lower reduction efficiency. The kinetic study indicated that the reduction of p-nitrophenol on the surface of the prepared nanocomposite follows the pseudo-first-order model. The results show that the proposed nanocomposite is very effective and very promising to be commercially applied in water treatment, due to its low cost, simple synthesis procedure, and reusability.

Catalytic nanomedicine: a brief review of bionanocatalysts

Catalytic nanomedicine is a research area and source of disruptive technology that studies the application of bionanocatalysts (organically functionalized mesoporous nanostructured materials with catalytic properties) in diverse areas such as disinfection, tissue regeneration in chronic wounds and oncology. This paper reviews the emergence of catalytic nanomedicine in 2006, its basic principles, main achievements and future perspectives, as well as giving a summary of the knowledge gaps that need to be addressed to exploit the full potential of this novel discipline. This review intends to foster knowledge dissemination regarding catalytic nanomedicine, and to encourage further research to elucidate the mechanisms and possible applications of these nanomaterials.

Photocatalytic degradation-based efficient elimination of pesticides using ruthenium/gold metal nanoparticle-anchored zirconium dioxide

Ruthenium and gold metal nanoparticles-incorporated zirconium dioxide (ZrO2@Ru and ZrO2@Au) nanostructures were developed as promising photocatalysts for wastewater remediation.

Plasmon-assisted photocatalytic CO2 reduction on Au decorated ZrO2 catalysts

ZrO₂ is one of the most stable metal oxides which is applicable to various chemical reactions in harsh environments. However, the photocatalytic performance of ZrO₂ is relatively poor due to the negligible use of the solar spectrum caused by the wide bandgap (E_g = 5.3 eV). Here, we report plasmon enhanced Au nanoparticles decorated onto ZrO₂ through a facile tannic acid-reduction method. The Au/ZrO₂ heterojunctions exhibited efficient and stable photocatalytic activity of reducing CO₂ into main CO and CH₄, at the rates of 25.6 μmol g^-1 h^-1 and 5.1 μmol g^-1 h^-1 at most, respectively, approximately 6-fold enhanced compared to the pristine ZrO₂, under simulated solar light. The reduction rates could also be improved over 10-fold under visible light when Au nanoparticles were loaded onto ZrO₂. UV-Vis diffuse reflectance spectra confirmed the enhanced visible-light absorption of Au/ZrO₂ caused by localized surface plasmon resonance (LSPR). Electrochemical impedance spectra (EIS) and photocurrent tests proved the more efficient charge transport and electron-hole separation of Au/ZrO₂ heterojunctions. This study demonstrates an effective strategy of LSPR effects to improve the photocatalytic performances of semiconductors.

The Synthesis Methodology of PEGylated Fe3O4@Ag Nanoparticles Supported by Their Physicochemical Evaluation

Many investigations are currently being performed to develop the effective synthesis methodology of magnetic nanoparticles with appropriately functionalized surfaces. Here, the novelty of the presented work involves the preparation of nano-sized PEGylated Fe3O4@Ag particles, i.e., the main purpose was the synthesis of magnetic nanoparticles with a functionalized surface. Firstly, Fe3O4 particles were prepared via the Massart process. Next, Ag+ reduction was conducted in the presence of Fe3O4 particles to form a nanosilver coating. The reaction was performed with arabic gum as a stabilizing agent. Sound energy-using sonication was applied to disintegrate the particles' agglomerates. Next, the PEGylation process aimed at the formation of a coating on the particles' surface using PEG (poly(ethylene glycol)) has been performed. It was proved that the arabic gum limited the agglomeration of nanoparticles, which was probably caused by the steric effect caused by the branched compounds from the stabilizer that adsorbed on the surface of nanoparticles. This effect was also enhanced by the electrostatic repulsions. The process of sonication caused the disintegration of aggregates. Formation of iron (II, III) oxide with a cubic structure was proved by diffraction peaks. Formation of a nanosilver coating on the Fe3O4 nanoparticles was confirmed by diffraction peaks with 2θ values 38.15° and 44.35°. PEG coating on the particles' surface was proven via FT-IR (Fourier Transform Infrared Spectroscopy) analysis. Obtained PEG-nanosilver-coated Fe3O4 nanoparticles may find applications as carriers for targeted drug delivery using an external magnetic field.

Facile Fabrication of a ZnO/Eu2O3/NiO-Based Ternary Heterostructure Nanophotocatalyst and Its Application for the Degradation of Methylene Blue

The ZnO-based ternary heterostructure ZnO/Eu2O3/NiO nanoparticles are synthesized using waste curd as fuel by a simple one-pot combustion method. The as-synthesized heterostructure is characterized by using various spectroscopic and microscopic techniques including X-ray diffraction, UV-vis, FTIR, SEM, and TEM analyses. The photocatalytic activity of the ternary nanocomposite was tested for the photodegradation of methylene blue (MB) under solar light irradiation. The results have revealed that the ternary ZnO/Eu2O3/NiO photocatalyst exhibits excellent performance toward the photocatalytic degradation of the studied dye. Optimization studies revealed that the synthesized heterostructure exhibited a pH-dependent photocatalytic activity, and better results are obtained for specific concentrations of dye and catalysts. Among the different light sources employed during the study, the catalyst was found to possess the best degradation efficiency in visible light.