On the Nanoscale Mapping of the Mechanical and Piezoelectric Properties of Poly (L-Lactic Acid) Electrospun Nanofibers

A review of recent advances of piezoelectric poly-L-lactic acid for biomedical applications

Poly-L-lactic acid (PLLA), recognized as a piezoelectric material, not only demonstrates exceptional piezoelectric properties but also exhibits commendable biocompatibility and biodegradability. These properties render PLLA highly promising for diverse applications, including sensors, wearable devices, biomedical engineering, and related domains. This review offers a comprehensive overview of the distinctive piezoelectric effect of PLLA-based material and delves into the latest advancements in its preparation strategies as a piezoelectric material. It further presents recent research progress in PLLA-based piezoelectric materials, particularly in the realms of health monitoring, skin repair, nerve regeneration, and tissue repair. The discourse extends to providing insights into potential future trajectories for the development of PLLA-based piezoelectric materials.

Aligned Electroactive Electrospun Fibrous Scaffolds for Peripheral Nerve Regeneration

Effective repair and functional recovery of large peripheral nerve deficits are urgent clinical needs. A biofunctional electroactive scaffold typically acts as a "bridge" for the repair of large nerve defects. In this study, we constructed a biomimetic piezoelectric and conductive aligned polypyrrole (PPy)/polydopamine (PDA)/poly-l-lactic acid (PLLA) electrospun fibrous scaffold to improve the hydrophilicity and cellular compatibility of PLLA and restore the weakened piezoelectric effect of PDA, which is beneficial in promoting Schwann cell differentiation and dorsal root ganglion neuronal extension and alignment. The aligned PPy/PDA/PLLA fibrous scaffold bridged the sciatic nerve of Sprague-Dawley rats with a 10 mm deficit, prevented autotomy, and promoted nerve regeneration and functional recovery, thereby activating the calcium and AMP-activated protein kinase signaling pathways. Therefore, electroactive fibrous scaffolds exhibit great potential for neural tissue regeneration.

Nanometric Mechanical Behavior of Electrospun Membranes Loaded with Magnetic Nanoparticles

This work analyzes on nanoscale spatial domains the mechanical features of electrospun membranes of Polycaprolactone (PCL) loaded with Functionalized Magnetite Nanoparticles (FMNs) produced via an electrospinning process. Thermal and structural analyses demonstrate that FMNs affect the PCL crystallinity and its melting temperature. HarmoniX-Atomic Force Microscopy (H-AFM), a modality suitable to map the elastic modulus on nanometric domains of the sample surface, evidences that the FMNs affect the local mechanical properties of the membranes. The mechanical modulus increases when the tip reveals the magnetite nanoparticles. That allows accurate mapping of the FMNs distribution along the nanofibers mat through the analysis of a mechanical parameter. Local mechanical modulus values are also affected by the crystallinity degree of PCL influenced by the filler content. The crystallinity increases for a low filler percentage (<5 wt.%), while, higher magnetite amounts tend to hinder the crystallization of the polymer, which manifests a lower crystallinity. H-AFM analysis confirms this trend, showing that the distribution of local mechanical values is a function of the filler amount and crystallinity of the fibers hosting the filler. The bulk mechanical properties of the membranes, evaluated through tensile tests, are strictly related to the nanometric features of the complex nanocomposite system.

Comparative review of piezoelectric biomaterials approach for bone tissue engineering

Bone as a minerals' reservoir and rigid tissue of the body generating red and white blood cells supports various organs. Although the self-regeneration property of bone, it cannot regenerate spontaneously in severe damages and still remains as a challenging issue. Tissue engineering offers several techniques for regenerating damaged bones, where various biomaterials are examined to fabricate scaffolds for bone repair. Piezoelectric characteristic plays a crucial role in repairing and regenerating damaged bone by mimicking the bone niche behavior. Piezoelectric biomaterials show significant potential for bone tissue engineering. Herein we try to have a comparative review on piezoelectric and non-piezoelectric biomaterials used in bone tissue engineering, classified them, and discussed their effects on implanted cells and manufacturing techniques. Especially, Polyvinylidene fluoride (PVDF) and its composites are the most practically used piezoelectric biomaterials for bone regeneration. PVDF and its composites have been summarized and discussed to repair damaged bone tissues.

An investigation into the polylactic acid texturization through thermomechanical processing and the improved d33 piezoelectric outcome of the fabricated scaffolds

The bio/sensors performance has been established to be significantly affected through partially or entirely alignment of nano/microfibrous in polymeric mats. The matter of crystalline/amorphous proportion in semicrystalline polymers is another factor that can affect the application of the piezoelectric patches. The present work deals with fabricating the scaffolds of micro/nanofibers through a modified electrospinning procedure. The ratio of the relevant organic and polar solvents, the beading, the degree of fiber alignment, and fiber thickness have been intentionally elaborated. An unaligned unbeaded nanofibrous mat has been fabricated after tuning the solvents to poly-lactic acid ratio. This paper, for the first time, deals with the calculation of the value of d₃₃ value of a commercial PLA and its improvement, it has been revealed that the d₃₃ piezoelectric property is improved as a consequence of the thermo-mechanical processing above the cold crystallization temperature. The applied thermo (mechanical) processing causes the structural evolution from amorphous to crystallized states. Formation of the α and α' crystalline phases is introduced as the main responsible for the improvement of the piezoelectric property. This improvement not only is correlated with the degree of crystallinity, but also the orientation and alignment of the crystallites is known to be influential. In this respect, the complex helical chain structural evolution of poly-lactic acid has been analyzed through Herman's orientation function. It has been found that, besides the characterized disorder-to-order phase transformation, the C=O branched out dipoles interactions significantly affects by the texturization of the aligned polymeric chains in the direction of the electrospinning which is known as the main factor to promote the piezoelectric property of processed mat.

Quantitative mapping of high modulus materials at the nanoscale: comparative study between atomic force microscopy and nanoindentation

Local mechanical properties of submicron features are of particular interest due to their influence on macroscopic material performance and behaviour. This study is focused on local nanomechanical measurements, based on the latest Atomic Force Microscopy (AFM) mode, where the peak force set point is finely controlled at each pixel. After probe calibration, we evaluate the impact of spring constant of two AFM hand-crafted natural full diamond tips with steel cantilevers, used for mapping. Based on the fast capture of the cantilever deflection at each pixel and real time force curve analysis in the elastic region, AFM local measured contact moduli mappings of the silica beads (>50 GPa) incorporated in an epoxy resin matrix, are compared with those determined using classical instrumented nanoindentation tests. Our analyses show that with the two AFM probes, without local residual deformation, the high moduli of the silica beads measured with this advanced AFM mode are within the standard deviation of the values determined by classical nanoindentation. LAY DESCRIPTION: The knowledge of material properties at the nanometer scale is a key parameter for well understanding and determining the behavior of material at macroscopic scale. In this paper, we compare two methods (an advanced mode and a classical one) based on the analysis of probes in interaction with the surface of studied material. We focus on a latest developed mode for determining local mechanical properties with a very high spatial resolution. For the advanced mode, we also consider two different hand-crafted probes. Our analyses show that with the high spatial resolution advanced mode, local mechanical properties are well determined. We also highlight the impact of the properties of the used probes for this advanced mode. In a final step, the power of the presented investigation lies in the fact that it does not modify the topography of the surface.