Tunable Synthesis of Hollow Co3O4 Nanoboxes and Their Application in Supercapacitors

2D Covalent Organic Framework Covalently Anchored with Carbon Nanotube as High-Performance Cathodes for Lithium and Sodium-Ion Batteries

Covalent organic frameworks (COFs), featuring structural diversity, permanent porosity, and functional versatility, have emerged as promising electrode materials for rechargeable batteries. To date, amorphous polymer, COF, or their composites are mostly explored in lithium-ion batteries (LIBs), while their research in other alkali metal ion batteries is still in infancy. This can be due to the challenges that arise from large volume changes, slow diffusion kinetics, and inefficient active site utilization by the large Na+ or K+ ion. Herein, microwave-assisted imide-based 2D COF, TAPB-NDA covalently connected with amine-functionalized carbon nanotubes (TAPB-NDA@CNT) targeting the application in both Li-/Na-ion batteries, is synthesized. As-synthesized, TAPB-NDA@CNT50 displays the good performance as LIB cathode with a specific capacity of ≈138 mAh g-1 at 25 mA g-1, long cycling stability (81.2% retention after 2000 cycles at 300 mA g-1), with excellent reversible capacity retention of ≈79.6%. Similarly, TAPB-NDA@CNT50, when employed in sodium-ion battery (SIB), exhibited 136.7 mAh g-1 specific capacity at 25 mA g-1, retained ≈80% of the reversible capacity after 1000 cycles at 300 mA g-1 and showing excellent rate performance. The structural advantage of TAPB-NDA@CNT will encourage researchers to design COF-based cathodes for the alkali ion batteries.

Photocatalyst Based on Nanostructured TiO2 with Improved Photocatalytic and Antibacterial Properties

This study shows an easy way to use electrochemistry and plasma layering to make Cobalt-Blue-TiO2 nanotubes that are better at catalysing reactions. Once a titanium plate has been anodized, certain steps are taken to make oxygen vacancies appear inside the TiO2 nanostructures. To find out how the Co deposition method changed the final catalyst's properties, it was put through electrochemical tests (to find the charge transfer resistance and flat band potential) and optical tests (to find the band gap and Urbach energy). The catalysts were also described in terms of their shape, ability to stick to surfaces, and ability to inhibit bacteria. When Cobalt was electrochemically deposited to Blue-TiO2 nanotubes, a film with star-shaped structures was made that was hydrophilic and antibacterial. The band gap energy went down from 3.04 eV to 2.88 eV and the Urbach energy went up from 1.171 eV to 3.836 eV using this electrochemical deposition method. Also, photodegradation tests with artificial doxycycline (DOX) water were carried out to see how useful the study results would be in real life. These extra experiments were meant to show how the research results could be used in real life and what benefits they might have. For the bacterial tests, both gram-positive and gram-negative bacteria were used, and BT/Co-E showed the best response. Additionally, photodegradation and photoelectrodegradation experiments using artificial doxycycline (DOX) water were conducted to determine the practical relevance of the research findings. The synergistic combination of light and applied potential leads to 70% DOX degradation after 60 min of BT/Co-E irradiation.

Efficient Recovery Annealing of the Pseudocapacitive Electrode with a High Loading of Cobalt Oxide Nanoparticles for Hybrid Supercapacitor Applications

Electrochemical pseudocapacitors, along with batteries, are the essential components of today's highly efficient energy storage systems. Cobalt oxide is widely developing for hybrid supercapacitor pseudocapacitance electrode applications due to its wide range of redox reactions, high theoretical capacitance, low cost, and presence of electrical conductivity. In this work, a recovery annealing approach is proposed to modify the electrochemical properties of Co₃O₄ pseudocapacitive electrodes. Cyclic voltammetry measurements indicate a predominance of surface-controlled redox reactions as a result of recovery annealing. X-ray diffraction, Raman spectra, and XPES results showed that due to the small size of cobalt oxide particles, low-temperature recovery causes the transformation of the Co₃O₄ nanocrystalline phase into the CoO phase. For the same reason, a rapid reverse transformation of CoO into Co₃O₄ occurs during in situ oxidation. This recrystallization enhances the electrochemical activity of the surface of nanoparticles, where a high concentration of oxygen vacancies is observed in the resulting Co₃O₄ phase. Thus, a simple method of modifying nanocrystalline Co₃O₄ electrodes provides much-improved pseudocapacitance characteristics.

Evaluation of the Synergistic Effect of Graphene Oxide Sheets and Co3O4 Wrapped with Vertically Aligned Arrays of Poly (Aniline-Co-Melamine) Nanofibers for Energy Storage Applications

In the present study, Co3O4 and graphene oxide (GO) are used as reinforcement materials in a copolymer matrix of poly(aniline-co-melamine) to synthesize ternary composites. The nanocomposite was prepared by oxidative in-situ polymerization and used as an electrode material for energy storage. The SEM images revealed the vertically aligned arrays of copolymer nanofibers, which entirely wrapped the GO sheets and Co3O4 nanoparticles. The EDX and mapping analysis confirmed the elemental composition and uniform distribution in the composite. The XRD patterns unveiled composites' phase purity and crystallinity through characteristic peaks appearing at their respective 2θ values in the XRD spectrum. The FTIR spectrums endorse the successful synthesis of composites, whereas TGA analysis revealed the higher thermal stability of composites. The cyclic voltammetry, galvanostatic charge-discharge, and electrochemical impedance spectroscopy are employed to elucidate the electrochemical features of electrodes. The ternary composite PMCoG-2 displayed the highest specific capacity of 134.36 C/g with 6 phr of GO, whereas PMCoG-1 and PMCoG-3 exhibited the specific capacities of 100.63 and 118.4 C/g having 3 phr and 12 phr GO at a scan rate of 0.003 V/s, respectively. The best electrochemical performance of PMCoG-2 is credited to the synergistic effect of constituents of the composite material.

Co2P decorated Co3O4 nanocomposites supported on carbon cloth with enhanced electrochemical performance for asymmetric supercapacitors

An effective strategy is demonstrated to promote electrochemical performance by the combination of Co3O4 with Co2P to form a composite electrode.

Construction of a Cu-Based Metal-Organic Framework by Employing a Mixed-Ligand Strategy and Its Facile Conversion into Nanofibrous CuO for Electrochemical Energy Storage Applications

Recently, metal-organic frameworks (MOFs) have been widely employed as a sacrificial template for the construction of nanostructured materials for a range of applications including energy storage. Herein, we report a facile mixed-ligand strategy for the synthesis of a Cu-MOF, [Cu₃(Azopy)₃(BTTC)₃(H₂O)₃·2H₂O]_n (where BTTC = 1,2,4,5-benzenetetracarboxylic acid and Azopy = 4,4'-azopyridine), via a slow-diffusion method at room temperature. X-ray analysis authenticates the two-dimensional (2D)-layered framework of Cu-MOF. Topologically, this 2D-layered structure is assigned as a 4-connected unimodal net with sql topology. Further, nanostructured CuO is obtained via a simple precipitation method by employing Cu-MOF as a precursor. After analysis of their physicochemical properties through various techniques, both materials are used as surface modifiers of glassy carbon electrodes for a comparative electrochemical study. The results reveal a superior charge storage performance of CuO (244.2 F g^-1 at a current density of 0.8 A g^-1) with a high rate capability compared to Cu-MOF. This observation paves the pathway for the strategic design of high-performing supercapacitor electrode materials.

Photocatalytic and Electrocatalytic Properties of Cu-Loaded ZIF-67-Derivatized Bean Sprout-Like Co-TiO2/Ti Nanostructures

ZIF-derivatized catalysts have shown high potential in catalysis. Herein, bean sprout-like Co-TiO2/Ti nanostructures were first synthesized by thermal treatment at 800 °C under Ar-flow conditions using sacrificial ZIF-67 templated on Ti sheets. It was observed that ZIF-67 on Ti sheets started to thermally decompose at around 350 °C and was converted to the cubic phase Co3O4. The head of the bean sprout structure was observed to be Co3O4, while the stem showed a crystal structure of rutile TiO2 grown from the metallic Ti support. Cu sputter-deposited Co-TiO2/Ti nanostructures were also prepared for photocatalytic and electrocatalytic CO2 reduction performances, as well as electrochemical oxygen reaction (OER). Gas chromatography results after photocatalytic CO2 reduction showed that CH3OH, CO and CH4 were produced as major products with the highest MeOH selectivity of 64% and minor C2 compounds of C2H2, C2H4 and C2H6. For electrocatalytic CO2 reduction, CO, CH4 and C2H4 were meaningfully detected, but H2 was dominantly produced. The amounts were observed to be dependent on the Cu deposition amount. Electrochemical OER performances in 0.1 M KOH electrolyte exhibited onset overpotentials of 330-430 mV (vs. RHE) and Tafel slopes of 117-134 mV/dec that were dependent on Cu-loading thickness. The present unique results provide useful information for synthesis of bean sprout-like Co-TiO2/Ti hybrid nanostructures and their applications to CO2 reduction and electrochemical water splitting in energy and environmental fields.