Effect of Aeration Mode on Microbial Structure and Efficiency of Treatment of TSS-Rich Wastewater from Meat Processing

Tire materials disturb transformations of nitrogen compounds and affect the structure of biomass in aerobic granular sludge reactors

Tire materials (TMs) present a notable hazard due to their potential to release harmful chemicals and microplastics into the environment. They can infiltrate wastewater treatment plants, where their effects remain inadequately understood, raising concerns regarding their influence on treatment procedures. Thus, this study investigated the impact of TMs in wastewater (10, 25, 50 mg/L) on wastewater treatment efficiency, biomass morphology, and microbial composition in aerobic granular sludge (AGS) reactors. TM dosage negatively correlated with nitrification and denitrification efficiencies, reducing overall nitrogen removal, but did not affect the efficiency of chemical-oxygen-demand removal. The presence of TMs increased the diameter of the granules due to TM incorporation into the biomass. The most frequently leached additives from TMs were N-(1,3-dimethylbutyl)-N'-phenyl-1,4-phenylenediamine, benzothiazole (BTH), and 2-hydroxybenzothiazole. In the treated wastewater, only BTH and aniline were detected in higher concentrations, which indicates that tire additives were biodegraded by AGS. The microbial community within the AGS adapted to TMs and their chemicals, highlighting the potential for efficient degradation of tire additives by bacteria belonging to the genera Rubrivivax, Ferruginibacter, and Xanthomonas. Additionally, our research underscores AGS's ability to incorporate TMs into biomass and effectively biodegrade tire additives, offering a promising solution for addressing environmental concerns related to TMs.

Biotreatment Potential and Microbial Communities in Aerobic Bioreactor Systems Treating Agro-Industrial Wastewaters

The thriving agro-industry sector accounts for an essential part of the global gross domestic product, as the need for food and feed production is rising. However, the industrial processing of agricultural products requires the use of water at all stages, which consequently leads to the production of vast amounts of effluents with diverse characteristics, which contain a significantly elevated organic content. This fact reinforces the need for action to control and minimize the environmental impact of the produced wastewater, and activated sludge systems constitute a highly reliable solution for its treatment. The current review offers novel insights on the efficiency of aerobic biosystems in the treatment of agro-industrial wastewaters and their ecology, with an additional focus on the biotechnological potential of the activated sludge of such wastewater treatment plants.

Valorization of full-scale waste aerobic granular sludge for biogas production and the characteristics of the digestate

Despite the dynamic development of aerobic granular sludge (AGS) technology in wastewater treatment, there is limited data on how the different properties of AGS and activated sludge (AS) translate into differences in waste sludge management. Waste sludge generated in both AGS and AS technology is the biggest waste stream generated in wastewater treatment plants (WWTPs). This study aimed to assess biogas production from waste AGS from a full-scale system. Additionally, the properties of the digestate were investigated in terms of its management in line with the assumptions of a circular economy. Both aspects are important because the characteristics of AGS differ from those of AS. Its dense, extracellular-polymer-rich granule structure makes the susceptibility of AGS to anaerobic stabilization lower than that of AS. Given the advantages of AGS for sustainable wastewater treatment and its increasing popularity, waste AGS management will pose a serious challenge for WWTP operators. Therefore, AGS from a full-scale municipal WWTP was valorized for biogas production by increasing the accessibility of the organics in the sludge by homogenization or ultrasound pretreatment. Ultrasound pretreatment released about an order of magnitude more organics from the biomass than homogenization and significantly improved the production of methane-rich biogas (455 L/kg VS, about 66% of CH₄). The digestion time of pretreated AGS was reduced by 25% in comparison with that of untreated AGS making anaerobic digestion of AGS a feasible solution for sludge management. The AGS digestate was rich in Ca (77.0 g/kg TS), Mg (10.9 g/kg TS), N (35.1 g/kg TS) and P (32.4 g/kg TS), whereas its heavy metal levels and biochemical methane potential were low. AGS digestate is not only environmentally safe, but it can serve as a rich source of organics and elements essential for soil fertility and stability.

Anode Modification as an Alternative Approach to Improve Electricity Generation in Microbial Fuel Cells

Sustainable production of electricity from renewable sources by microorganisms is considered an attractive alternative to energy production from fossil fuels. In recent years, research on microbial fuel cells (MFCs) technology for electricity production has increased. However, there are problems with up-scaling MFCs due to the fairly low power output and high operational costs. One of the approaches to improving energy generation in MFCs is by modifying the existing anode materials to provide more electrochemically active sites and improve the adhesion of microorganisms. The aim of this review is to present the effect of anode modification with carbon compounds, metallic nanomaterials, and polymers and the effect that these modifications have on the structure of the microbiological community inhabiting the anode surface. This review summarizes the advantages and disadvantages of individual materials as well as possibilities for using them for environmentally friendly production of electricity in MFCs.