Focus-Adjustable Head Mounted Display with Off-Axis System

Modeling Several Optical Components Using Scalar Diffraction Theory

Compound systems are generally treated by geometrical optics, for instance, through the Gauss’ formalism. The objective is to simplify the process of image formation. However, this formalism does not include the wave characteristics of light and boundary effects. The treatment of diffraction is not straightforward. Thus, the extension of this formalism towards the scalar theory of diffraction is very desired. This work offers this extension and emphasizes its importance. Compound systems, including the human eye, are then modeled by Fresnel theory. For illustration, a lens-based model of the Fresnel transform is used to treat the human eye system.

Novel dual-resistor-diode limtier circuit structures for high-voltage reliable ultrasound receiver systems

BACKGROUND:

The limiters have been used to protect the ultrasound receivers because of the inherent characteristic of the transducers which are required to use the high voltage excitation to obtain the reasonable echo signal amplitudes.

OBJECTIVE:

Among the variety of the limiters, the performances of discharge voltage degradation from the limiters gradually deteriorate the whole ultrasound systems according to the applied voltages of the ultrasonic transducers. This could cause the ultrasound systems to be unreliable for the long-term operations, resulting in possibly breaking the receiver systems.

METHODS:

Designed limiters were evaluated with insertion loss, total harmonic distortion, and pulse-echo responses with the ultrasound transducer devices.

RESULTS:

Designed new dual-resistor-diode limiters exhibited greater and faster suppression of the pulse width (1.15 V and 6.1 μs) for high-voltage signals.

CONCLUSIONS:

Our proposed dual-resistor-diode limiter could be one of the potential candidates for reliable ultrasound receiver system.

Fisheye lens design for solar-powered mobile ultrasound devices

BACKGROUND: Compared to benchtop ultrasound machines, mobile ultrasound machines require portable batteries when acquiring information regarding human tissues during outdoor activities. OBJECTIVE: A novel fisheye lens type was designed to address the charging issue where it is difficult to constantly track the sun. This method does not require the use of a mechanical motor that constantly tracks the sun to charge the portable batteries. METHODS: To obtain an optical solar power system, the numerical aperture (NA) and field angle must be increased. Therefore, we use the fisheye lens with the largest field angle. RESULTS: The NA of the designed fisheye lens system reaches 0.75, allowing light collection of approximately ± 48∘. Additionally, the efficiency ratio of the central and surrounding areas also satisfies more than 80% at a field angle of 85∘ and more than 70% at field angles of 85∘ to 90∘, respectively. CONCLUSIONS: We designed a novel fisheye lens for solar-powered mobile ultrasound machines used outdoors.

New Optical Design Method of Floating Type Collimator for Microscopic Camera Inspection

Recently released mobile phone cameras are capable of photographing objects at a fairly close distance. In addition, the field angle from the camera has increased. To measure the resolution of a mobile phone camera, the target must be photographed. To measure the resolution according to the object distance change from a mobile phone camera with a wide field angle, the target size must be large, whereas the target position must be moved. However, the target size cannot be changed. A virtual object for the target was created using a collimator. Moving a part of the lens group constituting the collimator also changes the virtual object distance. If the amount of change in the virtual object distance is large, the resolution of the collimator may also change. Therefore, a collimator that maintains the resolution even when the distance of the virtual object changes is designed as a floating type in which two lens groups move. Therefore, we propose a new floating collimator optical system that can inspect the resolution of mobile phone cameras from infinity to a close range to compensate for aberrations caused by object distance changes.

Optical Design of a Novel Collimator System with a Variable Virtual-Object Distance for an Inspection Instrument of Mobile Phone Camera Optics

The resolution performance of mobile phone camera optics was previously checked only near an infinite point. However, near-field performance is required because of reduced camera pixel sizes. Traditional optics are measured using a resolution chart located at a hyperfocal distance, which can only measure the resolution at a specific distance but not at close distances. We designed a new collimator system that can change the virtual image of the resolution chart from infinity to a short distance. Hence, some lenses inside the collimator systems must be moved. Currently, if the focusing lens is moved, chromatic aberration and field curvature occur. Additional lenses are required to correct this problem. However, the added lens must not change the characteristics of the proposed collimator. Therefore, an equivalent-lens conversion method was designed to maintain the first-order and Seidel aberrations. The collimator system proposed in this study does not move or change the resolution chart.