Design and Preliminary Testing of an In-Field Passive Treatment System for Removing Phosphorus from Surface Water

Unraveling the Phosphorus Adsorption Mechanisms in Three-dimensional Reduced Graphene Oxide Materials

To prevent eutrophication, controlling the phosphate concentration levels is one of the most important issues in surface water management. One of the most utilized methods is phosphate adsorption. However, its application faces a bottleneck due to the unclear understanding of adsorption and interaction mechanisms. The present work unlocks the phosphorus adsorption mechanisms in three-dimensional reduced graphene oxide with different reduction levels and pore sizes to remove phosphate from water using experiments and multiscale simulations. Experiments were performed to evaluate the influence of pH, ionic strength, and temperature on the adsorption. Molecular Dynamics and Ab Initio simulations evaluated the influence of the pore size and oxidation degrees of the materials. We show that the adsorption capacity of the materials increases with increasing pH and ionic strength and decreasing temperature. It is observed that the more oxidized the material and the less compact the structure, the better the adsorption. These results are theoretically explained in terms of the interaction of functional groups and the clustering of phosphate ions, which results in better adsorption in materials with larger pores. The underlying mechanisms for the 3D-reduced graphene oxide performance were confirmed by spectroscopy analysis. All the results show that 3D-reduced graphene oxide can sorb phosphate in different complex water remediation systems with characteristics that can be modulated by changing the material synthesis method.

Diatomite Composited with a Zeolitic Imidazolate Framework for Removing Phosphate from Water

Adsorption technology based on various adsorbents has been widely applied in wastewater treatment containing phosphate. A novel diatomite adsorbent composited with ZIF-8 (CZD) was developed for removing phosphate from water in this work. The chitosan was used to pre-modify the diatomite so that ZIF-8 could be anchored on the surface of the diatomite solidly and uniformly. The diatomite composited with ZIF-8 was then used to remove phosphate in water by an adsorption process, the process variables such as adsorption time, temperature, pH, and competitive ions were investigated. The electrostatic attraction was the primary mechanism of phosphate removal. The adsorption reached equilibrium within 90 min, and its sorption capacity increased when adsorption time and temperature increased. Especially, CZD had a rapid adsorption rate and 85% of the phosphate in the solution can be adsorbed within the first 10 min. The maximum phosphate adsorption capacities of the modified diatomite reached 13.46, 13.55, and 13.95 mg/g at 25, 35, and 45 °C, respectively. The removal efficiencies of CZD for phosphate were more than 98% and even came up to 100% at 45 °C. The adsorption isotherms fit well with the Langmuir isotherm model. The Freundlich isotherm and Temkin isotherm showed that the adsorption process is physical in nature. The kinetic data of the adsorption process were fitted by the pseudo-second-order kinetics. Thermodynamic parameters indicated that the adsorption process was endothermic. This adsorbent provided an alternative for phosphate removal on account of the high adsorption efficiency in a short time. Therefore, CZD could be a promising and eco-friendly phosphate adsorbent for wastewater treatment.