Pharmaceutical and Antibiotic Pollutant Levels in Wastewater and the Waters of the Zarqa River, Jordan

Modified polymer membranes for the removal of pharmaceutical active compounds in wastewater and its mechanism-A review

Membrane technology can play a suitable role in removing pharmaceutical active compounds since it requires low energy and simple operation. Even though membrane technology has progressed for wastewater applications nowadays, modifying membranes to achieve the strong desired membrane performance is still needed. Thus, this study overviews a comprehensive insight into the application of modified polymer membranes to remove pharmaceutical active compounds from wastewater. Biotoxicity of pharmaceutical active compounds is first prescribed to gain deep insight into how membranes can remove pharmaceutical active compounds from wastewater. Then, the behavior of the diffusion mechanism can be concisely determined using mass transfer factor model that represented by β and B with value up to 2.004 g h mg-1 and 1.833 mg g-1 for organic compounds including pharmaceutical active compounds. The model refers to the adsorption of solute to attach onto acceptor sites of the membrane surface, external mass transport of solute materials from the bulk liquid to the membrane surface, and internal mass transfer to diffuse a solute toward acceptor sites of the membrane surface with evidenced up to 0.999. Different pharmaceutical compounds have different solubility and relates to the membrane hydrophilicity properties and mechanisms. Ultimately, challenges and future recommendations have been presented to view the future need to enhance membrane performance regarding fouling mitigation and recovering compounds. Afterwards, the discussion of this study is projected to play a critical role in advance of better-quality membrane technologies for removing pharmaceutical active compounds from wastewater in an eco-friendly strategy and without damaging the ecosystem.

Photocatalytic Removal of Antibiotics from Wastewater Using the CeO2/ZnO Heterojunction

CeO₂/ZnO-based photocatalytic materials were synthesized by the sol-gel method in order to establish heterojunctions that increase the degradation efficiency of some types of antibiotics by preventing the recombination of electron-hole pairs. The synthesized materials were analysed by XRD, SEM, EDAX, FTIR, and UV-Vis. After several tests, the optimal concentration of the catalyst was determined to be 0.05 g‧L^-1 and 0.025 g‧L^-1 for chlortetracycline and 0.05 g‧L^-1 for ceftriaxone. CeO₂/ZnO assemblies showed much better degradation efficiency compared to ZnO or CeO₂ tested individually. Sample S3 shows good photocatalytic properties for the elimination of ceftriaxone and tetracycline both from single solutions and from the binary solution. This work provides a different perspective to identify other powerful and inexpensive photocatalysts for wastewater treatment.

Assessment of Xenoestrogens in Jordanian Water System: Activity and Identification

Sex hormone disruptors (xenoestrogens) are a global concern due to their potential toxicity. However, to date, there has been no study to investigate the presence of xenoestrogen pollutants in the Jordanian water system. Samples in triplicates were collected from six locations in Jordan, including dams, surface water, tap or faucet water, and filtered water (drinking water-local company). Xenoestrogens were then extracted and evaluated with a yeast estrogen screen utilizing Saccharomyces cerevisiae. Later, possible pollutants were mined using ultrahigh-performance liquid chromatography (UPLC) coupled with a Bruker impact II Q-TOF-MS. Possible hits were identified using MetaboScape software (4000 compounds), which includes pesticide, pharmaceutical pollutant, veterinary drug, and toxic compound databases and a special library of 75 possible xenoestrogens. The presence of xenoestrogens in vegetable samples collected from two different locations was also investigated. The total estrogen equivalents according to the YES system were 2.9 ± 1.2, 9.5 ± 5, 2.5 ± 1.5, 1.4 ± 0.9 ng/L for King Talal Dam, As-Samra Wastewater Treatment Plant, King Abdullah Canal, and tap water, respectively. In Almujeb Dam and drinking water, the estrogenic activity was below the detection limit. Numbers of identified xenoestrogens were: As-Samra Wastewater Treatment Plant 27 pollutants, King Talal Dam 20 pollutants, Almujeb Dam 10 pollutants, King Abdullah Canal 16 pollutants, Irbid tap water 32 pollutants, Amman tap water 30 pollutants, drinking water 3 pollutants, and vegetables 7 pollutants. However, a large number of compounds remained unknown. Xenoestrogen pollutants were detected in all tested samples, but the total estrogenic capacities were within the acceptable range. The major source of xenoestrogen pollutants was agricultural resources. Risk evaluations for low xenoestrogen activity should be taken into account, and thorough pesticide monitoring systems and regular inspections should also be established.

Occurrence and risk assessment of pharmaceuticals in surface waters of the Middle East and North Africa: A review

Pharmaceutical compounds in surface water are perceived as contaminants of emerging concern due to their impacts on the aquatic environment and human health. The risk associated with these compounds has not been quantified in the Middle East and North Africa (MENA). This review identified that 210 pharmaceutical compounds have been analyzed in MENA water compartments between 2008 and 2022. In fact, 151 of these substances were detected in at least one of 13 MENA countries where occurrence studies had been conducted. Antibiotics claimed the highest number of pharmaceuticals detected with concentrations ranging between 0.03 and 66,400 ng/L (for Thiamphenicol and Spiramycin respectively). To investigate whether any of these compounds exert an ecological, human health, or antibiotic resistance risk, a screening-level risk assessment was performed in surface water matrices using maximum, median, and minimum concentrations. 39 and 8 detected pharmaceuticals in MENA surface waters posed a possible risk on aquatic ecosystems and human health respectively. Extremely high risk quotients (>1000) for six pharmaceuticals (17β estradiol, spiramycin, diclofenac, metoprolol, ethinylestradiol, and carbamazepine) were enumerated based on maximal concentrations implying an alarming risk on aquatic toxicity. Moreover, hormones posed the highest possible risk on human health whether ingested through drinking water or fish (e.g., 17β-estradiol had a health risk quotient of 2880 for children). Spiramycin showed a high risk of antibiotic resistance with a risk quotient of 133. This review serves as a basis for future prioritization studies and regulatory guidelines in the MENA region to minimize the risks of the identified compounds.

Occurrence of veterinary antibiotics in poultry manure from two farms in Ibadan, Nigeria: Ecotoxicological implications in manure-amended soil

Veterinary antibiotics are commonly used in poultry farming for preventing diseases and promoting growth. As a result of their incomplete metabolism in poultry birds, veterinary antibiotics are usually excreted and are frequently detected in poultry manures. Veterinary antibiotics in poultry manure applied onto soil may pose serious ecological effect to the terrestrial and aquatic environment. In the present work, the occurrence of three veterinary antibiotics (sulfamethoxazole, sulfadimidine and trimethoprim), categorized as veterinary antimicrobial agents of critical importance, was investigated in poultry manure from two poultry farms in Nigeria. The potential ecotoxicological risk of target veterinary antibiotics in poultry manure-amended soil was also assessed. A modified quick, easy, cheap, effective, rugged and safe (QuEChERS) extraction was adopted for the extraction of target veterinary antibiotics and instrumental analysis was achieved by high performance liquid chromatography. Sulfamethoxazole, sulfadimidine and trimethoprim were quantified in poultry manures from the poultry farms up to 12.7 μg g-1, 16.1 μg g-1 and 33.8 μg g-1, respectively. Sulfamethoxazole and trimethoprim in poultry manure-amended soil presented low risk to Eisenia fetida (earthworm). The ecological effect of sulfamethoxazole for the root length of rice was high in Farm B and medium in Farm A. Sulfamethoxazole presented high risk to aquatic organisms while sulfadimidine and trimethoprim posed medium risk and low risk, respectively to aquatic organisms. The results indicated that residual veterinary antibiotics in poultry manures could have adverse effects on crops after application to agricultural soil. There is a need for effective enlightenment programs for poultry farmers in Nigeria to bring about awareness on the environmental and toxicological impact of the excessive and uncontrolled use of veterinary antibiotics in poultry farming and the adverse ecological implications of poultry manure application on farmlands.

Influence of Chromatographic Conditions on LOD and LOQ of Fluoxetine and Sertraline Analyzed by TLC-Densitometric Method

This research introduces the analysis of fluoxetine and sertraline by means of the TLC-densitometric method. They provide information on LOD and LOQ under various chromatographic conditions. The study used adsorption (NPTLC) and partition (RPTLC) thin-layer chromatography in combination with a densitometric analysis. Four types of chromatographic plates precoated with: silica gel 60 F254, silica gel 60, silanized silica gel 60 F254 (RP-2), and a mixture of silica gel 60 and kieselguhr F254, as well as three mobile phases: chloroform + methanol + ammonia (9:1:0.4, v/v/v), chloroform + methanol + glacial acetic acid (5:4:1, v/v/v), and acetone + toluene + ammonia (10:9:1, v/v/v), were used in NPTLC. RP-18F254 and silanized silica gel 60 F254 (RP-2) plates and four mobile phases: methanol + water (10:0 and 9:1, v/v), acetone + water (10:0 and 9:1, v/v), were used in RPTLC. The lowest LOD and LOQ values for fluoxetine were obtained using a silanized silica gel 60 F254 (RP-2) with acetone + toluene + ammonia (10:9:1, v/v/v) in NPTLC, and with a silanized silica gel 60 F254 (RP-2) in combination with methanol + water (10:0, v/v) in RPTLC. The lowest LOD and LOQ values of sertraline were obtained using a silica gel 60 with acetone + toluene + ammonia (10:9:1; v/v/v) in NPTLC. The smallest amount of sertraline was detected on the silanized silica gel 60 F254 plate in combination with methanol + water (9:1, v/v) in RPTLC. The obtained results provide important information that can give a good basis and set the direction for further, more detailed research; the results can also benefit other researchers who analyze fluoxetine and sertraline with the TLC technique in model systems (testing standards) as well as in drug and biological samples.