Microbial Fuel Cell United with Other Existing Technologies for Enhanced Power Generation and Efficient Wastewater Treatment

Improvement of biotic nitrate reduction in constructed photoautotrophic biofilm-soil microbial fuel cells

The biotic nitrate reduction rate in freshwater ecosystems is typically constrained by the scarcity of carbon sources. In this study, 'two-chambers' - 'two-electrodes' photoautotrophic biofilm-soil microbial fuel cells (P-SMFC) was developed to accelerate nitrate reduction by activating in situ electron donors that originated from the soil organic carbon (SOC). The nitrate reduction rate of P-SMFC (0.1341 d-1) improved by ∼ 1.6 times on the 28th day compared to the control photoautotrophic biofilm. The relative abundance of electroactive bacterium increased in the P-SMFC and this bacterium contributed to obtain electrons from SOC. Biochar amendment decreased the resistivity of P-SMFC, increased the electron transferring efficiency, and mitigated anodic acidification, which continuously facilitated the thriving of putative electroactive bacterium and promoted current generation. The results from physiological and ecological tests revealed that the cathodic photoautotrophic biofilm produced more extracellular protein, increased the relative abundance of Lachnospiraceae, Magnetospirillaceae, Pseudomonadaceae, and Sphingomonadaceae, and improved the activity of nitrate reductase and ATPase. Correspondingly, P-SMFC in the presence of biochar achieved the highest reaction rate constant for nitrate reduction (kobs) (0.2092 d-1) which was 2.4 times higher than the control photoautotrophic biofilm. This study provided a new strategy to vitalize in situ carbon sources in paddy soil for nitrate reduction by the construction of P-SMFC.

Simultaneous Wastewater Treatment and Resources Recovery by Forward Osmosis Coupled with Microbial Fuel Cell: A Review

Osmotic microbial fuel cells (OsMFCs) with the abilities to simultaneously treat wastewater, produce clean water, and electricity provided a novel approach for the application of microbial fuel cell (MFC) and forward osmosis (FO). This synergistic merging of functions significantly improved the performances of OsMFCs. Nonetheless, despite their promising potential, OsMFCs currently receive inadequate attention in wastewater treatment, water reclamation, and energy recovery. In this review, we delved into the cooperation mechanisms between the MFC and the FO. MFC facilitates the FO process by promoting water flux, reducing reverse solute flux (RSF), and degrading contaminants in the feed solution (FS). Moreover, the water flux based on the FO principle contributed to MFC's electricity generation capability. Furthermore, we summarized the potential roles of OsMFCs in resource recovery, including nutrient, energy, and water recovery, and identified the key factors, such as configurations, FO membranes, and draw solutions (DS). We prospected the practical applications of OsMFCs in the future, including their capabilities to remove emerging pollutants. Finally, we also highlighted the existing challenges in membrane fouling, system expansion, and RSF. We hope this review serves as a useful guide for the practical implementation of OsMFCs.

Pragmatic Treatment Strategies for Polyaromatic Hydrocarbon Remediation and Anti-biofouling from Surfaces Using Nano-enzymes: a Review

In this review, two important environmental pollutants have been considered for its potential remediation using microbial-derived nano-enzymes. Firstly, polyaromatic hydrocarbons (PAHs) are one of the major industrial contaminants in the environment due to their ubiquitous occurrence, toxicity, and proclivity for bioaccumulation. Secondly, biofouling due to biofilm-forming organisms that impact tremendous economic and environmental consequences in many industries, especially marine vessels where it causes an increase in hydrodynamic drag, which results in a loss of ship speed at constant power or a power increase to maintain the same speed with higher fuel consumption and emissions into the atmosphere, particularly Green House Gases (GHGs). Among the remediation strategies, biological routes are found to be promising, efficient, and sustainable. Natural ligninolytic enzymes such as MnP, LiP, laccase, peroxidases, and polysaccharide and protein degradative enzymes are found to be highly efficient for PAH degradation and antifouling respectively. However, large-scale usage of these enzymes is difficult due to various reasons like their poor stability, adaptation, and high-cost production of these enzymes. In recent years, the use of nanoparticles, particularly nano-enzymes, is found to be an innovative and synergistic approach to detoxify contaminated areas with concomitant maintenance of enzyme stability.

A Review on Opportunities and Limitations of Membrane Bioreactor Configuration in Biofuel Production

Biofuels are a clean and renewable source of energy that has gained more attention in recent years; however, high energy input and processing cost during the production and recovery process restricted its progress. Membrane technology offers a range of energy-saving separation for product recovery and purification in biorefining along with biofuel production processes. Membrane separation techniques in combination with different biological processes increase cell concentration in the bioreactor, reduce product inhibition, decrease chemical consumption, reduce energy requirements, and further increase product concentration and productivity. Certain membrane bioreactors have evolved with the ability to deal with different biological production and separation processes to make them cost-effective, but there are certain limitations. The present review describes the advantages and limitations of membrane bioreactors to produce different biofuels with the ability to simplify upstream and downstream processes in terms of sustainability and economics.

In-depth insight on microbial electrochemical systems coupled with membrane bioreactors for performance enhancement: a review

A conventional activated sludge (CAS) system has traditionally been used for secondary treatment in wastewater treatment plants. Due to the high cost of aeration and the problem of sludge treatment, researchers are developing alternatives to the CAS system. A membrane bioreactor (MBR) is a technology with higher solid-liquid separation efficiency. However, the use of MBR is limited due to inevitable membrane fouling and high energy consumption. Membrane fouling requires frequent cleaning, and MBR components must be replaced, which reduces membrane lifetime and operating costs. To overcome the limitations of the MBR system, a microbial fuel cell-membrane bioreactor (MFC-MBR) coupling system has attracted the interest of researchers. The design of the novel bioelectrochemical membrane reactor (BEMR) can effectively couple microbial degradation in the microbial electrochemical system (MES) and generate a microelectric field to reduce and alleviate membrane fouling in the MBR system. In addition, the coupling system combining an MES and an MBR can improve the efficiency of COD and ammonium removal while generating electricity to balance the energy consumption of the system. However, several obstacles must be overcome before the MFC-MBR coupling system can be commercialised. The aim of this study is to provide critical studies of the MBR, MES and MFC-MBR coupling system for wastewater treatment. This paper begins with a critical discussion of the unresolved MBR fouling problem. There are detailed past and current studies of the MES-MBR coupling system with comparison of performances of the system. Finally, the challenges faced in developing the coupling system on a large scale were discussed.

Bacterial community structure of electrogenic biofilm developed on modified graphite anode in microbial fuel cell

Formation of electrogenic microbial biofilm on the electrode is critical for harvesting electrical power from wastewater in microbial biofuel cells (MFCs). Although the knowledge of bacterial community structures in the biofilm is vital for the rational design of MFC electrodes, an in-depth study on the subject is still awaiting. Herein, we attempt to address this issue by creating electrogenic biofilm on modified graphite anodes assembled in an air-cathode MFC. The modification was performed with reduced graphene oxide (rGO), polyaniline (PANI), and carbon nanotube (CNTs) separately. To accelerate the growth of the biofilm, soybean-potato composite (plant) powder was blended with these conductive materials during the fabrication of the anodes. The MFC fabricated with PANI-based anode delivered the current density of 324.2 mA cm-2, followed by CNTs (248.75 mA cm-2), rGO (193 mA cm-2), and blank (without coating) (151 mA cm-2) graphite electrodes. Likewise, the PANI-based anode supported a robust biofilm growth containing maximum bacterial cell densities with diverse shapes and sizes of the cells and broad metabolic functionality. The alpha diversity of the biofilm developed over the anode coated with PANI was the loftiest operational taxonomic unit (2058 OUT) and Shannon index (7.56), as disclosed from the high-throughput 16S rRNA sequence analysis. Further, within these taxonomic units, exoelectrogenic phyla comprising Proteobacteria, Firmicutes, and Bacteroidetes were maximum with their corresponding level (%) 45.5, 36.2, and 9.8. The relative abundance of Gammaproteobacteria, Clostridia, and Bacilli at the class level, while Pseudomonas, Clostridium, Enterococcus, and Bifidobacterium at the genus level were comparatively higher in the PANI-based anode.

Influence of Nanomaterials and Other Factors on Biohydrogen Production Rates in Microbial Electrolysis Cells-A Review

Microbial Electrolysis Cells (MECs) are one of the bioreactors that have been used to produce bio-hydrogen by biological methods. The objective of this comprehensive review is to study the effects of MEC configuration (single-chamber and double-chamber), electrode materials (anode and cathode), substrates (sodium acetate, glucose, glycerol, domestic wastewater and industrial wastewater), pH, temperature, applied voltage and nanomaterials at maximum bio-hydrogen production rates (Bio-HPR). The obtained results were summarized based on the use of nanomaterials as electrodes, substrates, pH, temperature, applied voltage, Bio-HPR, columbic efficiency (CE) and cathode bio-hydrogen recovery (C Bio-HR). At the end of this review, future challenges for improving bio-hydrogen production in the MEC are also discussed.

A techno-economic approach for eliminating dye pollutants from industrial effluent employing microalgae through microbial fuel cells: Barriers and perspectives

Microbial fuel cells are biochemical factories which besides recycling wastewater are electricity generators, if their low power density can be scaled up. This also adds up to work on many factors responsible to increase the cost of running a microbial fuel cell. As a result, the first step is to use environment friendly dead organic algae biomass or even living algae cells in a microbial fuel cell, also referred to as microalgal microbial fuel cells. This can be a techno-economic aspect not only for treating textile wastewater but also an economical way of obtaining value added products and bioelectricity from microalgae. Besides treating wastewater, microalgae in its either form plays an essential role in treating dyes present in wastewater which essentially include azo dyes rich in synthetic ions and heavy metals. Microalgae require these metals as part of their metabolism and hence consume them throughout the integration process in a microbial fuel cell. In this review a detail plan is laid to discuss the treatment of industrial effluents (rich in toxic dyes) employing microbial fuel cells. Efforts have been made by researchers to treat dyes using microbial fuel cell alone or in combination with catalysts, nanomaterials and microalgae have also been included. This review therefore discusses impact of microbial fuel cells in treating wastewater rich in textile dyes its limitations and future aspects.

Application of Microbial Fuel Cell (MFC) for Pharmaceutical Wastewater Treatment: An Overview and Future Perspectives

Pharmaceutical wastewater (PWW) is rapidly growing into one of the world’s most serious environmental and public health issues. Existing wastewater treatment systems carry numerous loopholes in supplying the ever-increasing need for potable water resulting from rises in population, urbanization, and industrial growth, and the volume of wastewater produced is growing each day. At present, conventional treatment methods, such as coagulation, sedimentation, oxidation, membrane filtration, flocculation, etc., are used to treat PWW. In contrast to these, the application of microbial fuel cells (MFCs) for decontaminating PWW can be a promising technology to replace these methods. MFC technologies have become a trending research topic in recent times. MFCs have also garnered the interest of researchers worldwide as a promising environmental remediation technique. This review extensively discusses the flaws in standalone conventional processes and the integration of MFCs to enhance electricity production and contaminant removal rates, especially with respect to PWW. This article also summarizes the studies reported on various antibiotics and wastes from pharmaceutical industries treated by MFCs, and their efficiencies. Furthermore, the review explains why further research is needed to establish the actual efficiency of MFCs to achieve sustainable, environmentally friendly, and cost-effective wastewater treatment. A brief on technoeconomic impacts has also been made to provide a glimpse of the way these technologies might replace present-day conventional methods.