Application of the Supercapacitor for Energy Storage in China: Role and Strategy

Coupling of Nd doping and oxygen-rich vacancy in CoMoO4@NiMoO4 nanoflowers toward advanced supercapacitors and photocatalytic degradation

In this paper, we successfully prepared rare earth element-doped 0.8% Nd-CoMoO4@NiMoO4 nanoflowers with a large specific surface area using the sol-gel method for the first time. In the experiment, we added a structure-directing agent to successfully assemble the nanosheets into a three-dimensional ordered micro-flower shape. By using the strategy of forming a flower-shaped morphology with a structure-directing agent and doping Nd elements to generate oxygen vacancies, the problems of the collapse of the active material structure and slow reaction kinetics were solved. Through relevant electrochemical performance tests, it was found that when the rare earth element Nd was doped at a concentration of 0.8%, the material exhibited exceptional specific capacitance (2387 F g-1 at 1 A g-1) and cycling stability (99.3% after 10 000 cycles at 5 A g-1). These performance characteristics far surpassed those of the other synthesized products. We assembled 0.8% Nd-CoMoO4@NiMoO4 with hydrophilic CNTs into an asymmetric device, 0.8% Nd-CoMoO4@NiMoO4//CNTs. This device exhibited high specific capacitance (262 F g-1 at 1 A g-1) and cycling stability (99.2% after 3000 cycles), with a good energy storage effect. In addition, 0.8% Nd-CoMoO4@NiMoO4 has a low band gap, which broadens the absorption range of the product and improves the utilization rate of visible light. The photocatalyst showed good degradation efficiency (all exceeding 96%) and cycling stability (96%) for all four dyes. This paper provides a new strategy and method for preparing doped polymetallic mixtures, which has potential application value.

High Mass-Loading Biomass-Based Porous Carbon Electrodes for Supercapacitors: Review and Perspectives

Biomass-based porous carbon (BPC) with renewability and flexible nano/microstructure tunability has attracted increasing attention as efficient and cheap electrode materials for supercapacitors. To meet commercial needs, high mass-loading electrodes with high areal capacitance are preferred when designing supercapacitors. The increased mass percentage of active materials can effectively improve the energy density of supercapacitors. However, as the thickness of the electrode increases, it will face the following challenges including severely blocked ion transport channels, poor charging dynamics, poor electrode structural stability, and complex preparation processes. A bridge between theoretical research and practical applications of BPC electrodes for supercapacitors needs to be established. In this review, the advances of high mass-loading BPC electrodes for supercapacitors are summarized based on different biomass precursors. The key performance evaluation parameters of the high mass-loading electrodes are analyzed, and the performance influencing factors are systematically discussed, including specific surface area, pore structure, electrical conductivity, and surface functional groups. Subsequently, the promising optimization strategies for high mass-loading electrodes are summarized, including the structure regulation of electrode materials and the optimization of other supercapacitor components. Finally, the major challenges and opportunities of high mass-loading BPC electrodes in the future are discussed and outlined.

High electrical energy harvesting performance of an integrated microbial fuel cell and low voltage booster-rectifier system treating domestic wastewater

To harvest directly usable electrical energy from real domestic wastewater, a new power management system (PMS), transistor-based low voltage boosters followed by a voltage rectifier (LVBR), was developed and tested for its energy harvesting performance. Three air-cathode MFCs were individually linked with LVBs, which were electrically stacked in parallel and then connected with a single voltage rectifier (MFC-LVBR). The MFC-LVBR system could increase V_MFCto 11.9 ± 0.6 V without voltage reversal, which was capable of charging a lithium-ion batteryand supercapacitor-based power banks. When the integrated MFC-LVBR system was linked with a lithium-ion battery, the highest normalized energy recovery (NER_COD) of 0.76 kWh/kg-COD (NER_volumeof 0.22 kWh/m³) was achieved with a minimal energy loss of 14.4%, whichwas much higher than those previously reported values.Furthermore, the electrical energy charged in the lithium-ion battery successfully powered a DC peristaltic pump requiring a minimum operating power of 0.46 W.