1
|
Beskopylny AN, Shcherban' EM, Stel'makh SA, Shilov AA, Chernil'nik A, El'shaeva D, Chistyakov VA. Analysis of the Current State of Research on Bio-Healing Concrete (Bioconcrete). MATERIALS (BASEL, SWITZERLAND) 2024; 17:4508. [PMID: 39336249 PMCID: PMC11433433 DOI: 10.3390/ma17184508] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 08/13/2024] [Revised: 09/09/2024] [Accepted: 09/11/2024] [Indexed: 09/30/2024]
Abstract
The relatively small tensile strength of concrete makes this material particularly vulnerable to cracking. However, the reality is that it is not always possible and practically useful to conduct studies on high-quality sealing cracks due to their inaccessibility or small opening width. Despite the fact that currently there are many technologies for creating self-healing cement composites, one of the most popular is the technology for creating a biologically active self-healing mechanism for concrete. It is based on the process of carbonate ion production by cellular respiration or urease enzymes by bacteria, which results in the precipitation of calcium carbonate in concrete. This technology is environmentally friendly and promising from a scientific and practical point of view. This research focuses on the technology of creating autonomous self-healing concrete using a biological crack-healing mechanism. The research methodology consisted of four main stages, including an analysis of the already conducted global studies, ecological and economic analysis, the prospects and advantages of further studies, as well as a discussion and the conclusions. A total of 257 works from about 10 global databases were analyzed. An overview of the physical, mechanical and operational properties of bioconcrete and their changes is presented, depending on the type of active bacteria and the method of their introduction into the concrete mixture. An analysis of the influence of the automatic addition of various types of bacteria on various properties of self-healing bioconcrete is carried out, and an assessment of the influence of the method of adding bacteria to concrete on the process of crack healing is also given. A comparative analysis of various techniques for creating self-healing bioconcrete was performed from the point of view of technical progress, scientific potential, the methods of application of this technology, and their resulting advantages, considered as the factor impacting on strength and life cycle. The main conditions for a quantitative assessment of the sustainability and the possibility of the industrial implementation of the technology of self-healing bioconcrete are identified and presented. Various techniques aimed at improving the recovery process of such materials are considered. An assessment of the influence of the strength of cement mortar after adding bacteria to it is also given. Images obtained using electron microscopy methods are analyzed in relation to the life cycle of bacteria in mineral deposits of microbiological origin. Current gaps and future research prospects are discussed.
Collapse
Affiliation(s)
- Alexey N Beskopylny
- Department of Transport Systems, Faculty of Roads and Transport Systems, Don State Technical University, 344003 Rostov-on-Don, Russia
| | - Evgenii M Shcherban'
- Department of Engineering Geometry and Computer Graphics, Don State Technical University, 344003 Rostov-on-Don, Russia
| | - Sergey A Stel'makh
- Department of Unique Buildings and Constructions Engineering, Don State Technical University, Gagarin Sq. 1, 344003 Rostov-on-Don, Russia
| | - Alexandr A Shilov
- Department of Unique Buildings and Constructions Engineering, Don State Technical University, Gagarin Sq. 1, 344003 Rostov-on-Don, Russia
| | - Andrei Chernil'nik
- Department of Unique Buildings and Constructions Engineering, Don State Technical University, Gagarin Sq. 1, 344003 Rostov-on-Don, Russia
| | - Diana El'shaeva
- Department of Unique Buildings and Constructions Engineering, Don State Technical University, Gagarin Sq. 1, 344003 Rostov-on-Don, Russia
| | - Vladimir A Chistyakov
- Center for Agrobiotechnology, Don State Technical University, Gagarin Sq. 1, 344003 Rostov-on-Don, Russia
- Laboratory of Mechanics of Multicomponent and Multiphase Media, Peter the Great St. Petersburg Polytechnic University (SPbPU), 195251 St. Peterburg, Russia
- D.I. Ivanovsky Academy of Biology and Biotechnology, Southern Federal University, Stachky 194/1, 344090 Rostov-on-Don, Russia
| |
Collapse
|
2
|
Meskhi B, Beskopylny AN, Stel'makh SA, Shcherban' EM, Mailyan LR, Shilov AA, El'shaeva D, Shilova K, Karalar M, Aksoylu C, Özkılıç YO. Analytical Review of Geopolymer Concrete: Retrospective and Current Issues. MATERIALS (BASEL, SWITZERLAND) 2023; 16:ma16103792. [PMID: 37241419 DOI: 10.3390/ma16103792] [Citation(s) in RCA: 4] [Impact Index Per Article: 4.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 03/28/2023] [Revised: 05/04/2023] [Accepted: 05/15/2023] [Indexed: 05/28/2023]
Abstract
The concept of sustainable development provides for the search for environmentally friendly alternatives to traditional materials and technologies that would reduce the amount of CO2 emissions into the atmosphere, do not pollute the environment, and reduce energy costs and the cost of production processes. These technologies include the production of geopolymer concretes. The purpose of the study was a detailed in-depth analytical review of studies of the processes of structure formation and properties of geopolymer concretes in retrospect and the current state of the issue. Geopolymer concrete is a suitable, environmentally friendly and sustainable alternative to concrete based on ordinary Portland cement (OPC) with higher strength and deformation properties due to its more stable and denser aluminosilicate spatial microstructure. The properties and durability of geopolymer concretes depend on the composition of the mixture and the proportions of its components. A review of the mechanisms of structure formation, the main directions for the selection of compositions and processes of polymerization of geopolymer concretes has been made. The technologies of combined selection of the composition of geopolymer concrete, production of nanomodified geopolymer concrete, 3D printing of building structures from geopolymer concrete, and monitoring the state of structures using self-sensitive geopolymer concrete are considered. Geopolymer concrete with the optimal ratio of activator and binder has the best properties. Geopolymer concretes with partial replacement of OPC with aluminosilicate binder have a denser and more compact microstructure due to the formation of a large amount of calcium silicate hydrate, which provides improved strength, durability, less shrinkage, porosity and water absorption. An assessment of the potential reduction in greenhouse gas emissions from the production of geopolymer concrete compared to the production of OPC has been made. The potential of using geopolymer concretes in construction practice is assessed in detail.
Collapse
Affiliation(s)
- Besarion Meskhi
- Department of Life Safety and Environmental Protection, Faculty of Life Safety and Environmental Engineering, Don State Technical University, Gagarin, 1, 344003 Rostov-on-Don, Russia
| | - Alexey N Beskopylny
- Department of Transport Systems, Faculty of Roads and Transport Systems, Don State Technical University, Gagarin, 1, 344003 Rostov-on-Don, Russia
| | - Sergey A Stel'makh
- Department of Unique Buildings and Constructions Engineering, Don State Technical University, Gagarin Sq. 1, 344003 Rostov-on-Don, Russia
| | - Evgenii M Shcherban'
- Department of Engineering Geology, Bases, and Foundations, Don State Technical University, 344003 Rostov-on-Don, Russia
| | - Levon R Mailyan
- Department of Unique Buildings and Constructions Engineering, Don State Technical University, Gagarin Sq. 1, 344003 Rostov-on-Don, Russia
| | - Alexandr A Shilov
- Department of Unique Buildings and Constructions Engineering, Don State Technical University, Gagarin Sq. 1, 344003 Rostov-on-Don, Russia
| | - Diana El'shaeva
- Department of Unique Buildings and Constructions Engineering, Don State Technical University, Gagarin Sq. 1, 344003 Rostov-on-Don, Russia
| | - Karolina Shilova
- Department of Unique Buildings and Constructions Engineering, Don State Technical University, Gagarin Sq. 1, 344003 Rostov-on-Don, Russia
| | - Memduh Karalar
- Department of Civil Engineering, Faculty of Engineering, Zonguldak Bulent Ecevit University, Zonguldak 67100, Türkiye
| | - Ceyhun Aksoylu
- Department of Civil Engineering, Faculty of Engineering and Natural Sciences, Konya Technical University, Konya 42075, Türkiye
| | - Yasin Onuralp Özkılıç
- Department of Civil Engineering, Faculty of Engineering, Necmettin Erbakan University, Konya 42000, Türkiye
| |
Collapse
|
3
|
Shcherban’ EM, Beskopylny AN, Stel’makh SA, Mailyan LR, Meskhi B, Shilov AA, Pimenova E, El’shaeva D. Combined Effect of Ceramic Waste Powder Additives and PVA on the Structure and Properties of Geopolymer Concrete Used for Finishing Facades of Buildings. MATERIALS (BASEL, SWITZERLAND) 2023; 16:3259. [PMID: 37110093 PMCID: PMC10142298 DOI: 10.3390/ma16083259] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 03/18/2023] [Revised: 04/19/2023] [Accepted: 04/19/2023] [Indexed: 06/19/2023]
Abstract
Currently, there is great interest in geopolymer composites as an alternative and environmentally friendly basis for compositions for restoring the facades of historical and modern buildings. Although the use of these compounds is much smaller than conventional concrete, replacing their main components with ecological geopolymer counterparts still has the potential to significantly reduce the carbon footprint and reduce the amount of greenhouse gas emitted into the atmosphere. The study aimed to obtain geopolymer concrete with improved physical, mechanical, and adhesive characteristics, designed to restore the finishing of building facades. Regulatory methods, chemical analysis, and scanning electron microscopy were applied. The most optimal dosages of additives of ceramic waste powder (PCW) and polyvinyl acetate (PVA) have been established, at which geopolymer concretes have the best characteristics: 20% PCW introduced into the geopolymer instead of a part of metakaolin, and 6% PVA. The combined use of PCW and PVA additives in optimal dosages provides the maximum increase in strength and physical characteristics. Compressive strength increased by up to 18%, bending strength increased by up to 17%, water absorption of geopolymer concretes decreased by up to 54%, and adhesion increased by up to 9%. The adhesion of the modified geopolymer composite is slightly better with a concrete base than with a ceramic one (up to 5%). Geopolymer concretes modified with PCW and PVA additives have a denser structure with fewer pores and microcracks. The developed compositions are applicable for the restoration of facades of buildings and structures.
Collapse
Affiliation(s)
- Evgenii M. Shcherban’
- Department of Engineering Geology, Bases, and Foundations, Don State Technical University, 344003 Rostov-on-Don, Russia;
| | - Alexey N. Beskopylny
- Department of Transport Systems, Faculty of Roads and Transport Systems, Don State Technical University, 344003 Rostov-on-Don, Russia
| | - Sergey A. Stel’makh
- Department of Unique Buildings and Constructions Engineering, Don State Technical University, Gagarin Sq. 1, 344003 Rostov-on-Don, Russia; (S.A.S.); (L.R.M.); (A.A.S.); (D.E.)
| | - Levon R. Mailyan
- Department of Unique Buildings and Constructions Engineering, Don State Technical University, Gagarin Sq. 1, 344003 Rostov-on-Don, Russia; (S.A.S.); (L.R.M.); (A.A.S.); (D.E.)
| | - Besarion Meskhi
- Department of Life Safety and Environmental Protection, Faculty of Life Safety and Environmental Engineering, Don State Technical University, 344003 Rostov-on-Don, Russia;
| | - Alexandr A. Shilov
- Department of Unique Buildings and Constructions Engineering, Don State Technical University, Gagarin Sq. 1, 344003 Rostov-on-Don, Russia; (S.A.S.); (L.R.M.); (A.A.S.); (D.E.)
| | - Elena Pimenova
- Department of Architecture, School of Architecture, Design and Arts, Don State Technical University, 344003 Rostov-on-Don, Russia;
| | - Diana El’shaeva
- Department of Unique Buildings and Constructions Engineering, Don State Technical University, Gagarin Sq. 1, 344003 Rostov-on-Don, Russia; (S.A.S.); (L.R.M.); (A.A.S.); (D.E.)
| |
Collapse
|
4
|
Nanomodified Concrete with Enhanced Characteristics Based on River Snail Shell Powder. APPLIED SCIENCES-BASEL 2022. [DOI: 10.3390/app12157839] [Citation(s) in RCA: 2] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 02/04/2023]
Abstract
The utilization of aquaculture waste, such as snail shells, is a severe issue. These shells are common in water-sources and are a by-product of sifting sand for masonry and concrete work. Calcium-rich river shells are of great interest for cement building materials. In this regard, the purpose of this article was to develop a nanomodified concrete with improved characteristics based on the powder of snail shells. Experimental studies have confirmed the effectiveness of the use of river shells in concrete without a decrease in strength characteristics and deterioration of other properties. It has been found that the optimal replacement by the snail shell powder that replaced cement is in the amount of 6%. By the nanomodification of concrete with the powdered shells of river snails, it was possible to achieve an increase in compressive strength up to 12%, axial compressive strength—up to 8%, tensile strength in bending—up to 9%, axial tensile strength—up to 11%, elastic modulus—up to 8%. Concrete nanomodification with snail shell powder in the amount of 6% contributed to a reduction of deformations of up to 7%. The study of the microstructure of concrete samples nanomodified with snail shell powder confirmed the obtained dependences of the cement’s properties on the nanomodifier dosage, as well as the most effective dosage of snail shell powder.
Collapse
|
5
|
Beskopylny AN, Meskhi B, Stel’makh SA, Shcherban’ EM, Mailyan LR, Veremeenko A, Akopyan V, Shilov AV, Chernil’nik A, Beskopylny N. Numerical Simulation of the Bearing Capacity of Variotropic Short Concrete Beams Reinforced with Polymer Composite Reinforcing Bars. Polymers (Basel) 2022; 14:polym14153051. [PMID: 35956566 PMCID: PMC9370235 DOI: 10.3390/polym14153051] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/09/2022] [Revised: 07/21/2022] [Accepted: 07/25/2022] [Indexed: 11/16/2022] Open
Abstract
One of the disadvantages of reinforced concrete is the large weight of structures due to the steel reinforcement. A way to overcome this issue and develop new types of reinforcing elements is by using polymer composite reinforcement, which can successfully compensate for the shortcomings of steel reinforcement. Additionally, a promising direction is the creation of variotropic (transversely isotropic) building elements. The purpose of this work was to numerically analyze improved short bending concrete elements with a variotropic structure reinforced with polymer composite rods and to determine the prospects for the further extension of the results obtained for long-span structures. Numerical models of beams of a transversally isotropic structure with various types of reinforcement have been developed in a spatially and physically nonlinear formulation in ANSYS software considering cracking and crashing. It is shown that, in combination with a stronger layer of the compressed zone of the beam, carbon composite reinforcement has advantages and provides a greater bearing capacity than glass or basalt composite. It has been proven that the use of the integral characteristics of concrete and the deflections of the elements are greater than those when using the differential characteristics of concrete along the height of the section (up to 5%). The zones of the initiation and propagation of cracks for different polymer composite reinforcements are determined. An assessment of the bearing capacity of the beam is given. A significant (up to 146%) increase in the forces in the reinforcing bars and a decrease in tensile stresses (up to 210–230%) were established during the physically non-linear operation of the concrete material. The effect of a clear redistribution of stresses is in favor of elements with a variotropic cross section in height.
Collapse
Affiliation(s)
- Alexey N. Beskopylny
- Department of Transport Systems, Faculty of Roads and Transport Systems, Don State Technical University, Gagarin, 1, 344003 Rostov-on-Don, Russia
- Correspondence: ; Tel.: +7-8632738454
| | - Besarion Meskhi
- Department of Life Safety and Environmental Protection, Faculty of Life Safety and Environmental Engineering, Don State Technical University, Gagarin, 1, 344003 Rostov-on-Don, Russia;
| | - Sergey A. Stel’makh
- Department of Engineering Geology, Bases, and Foundations, Don State Technical University, 344003 Rostov-on-Don, Russia; (S.A.S.); (E.M.S.); (V.A.)
| | - Evgenii M. Shcherban’
- Department of Engineering Geology, Bases, and Foundations, Don State Technical University, 344003 Rostov-on-Don, Russia; (S.A.S.); (E.M.S.); (V.A.)
| | - Levon R. Mailyan
- Department of Roads, Faculty of Roads and Transport Systems, Don State Technical University, 344003 Rostov-on-Don, Russia; (L.R.M.); (A.V.)
| | - Andrey Veremeenko
- Department of Roads, Faculty of Roads and Transport Systems, Don State Technical University, 344003 Rostov-on-Don, Russia; (L.R.M.); (A.V.)
| | - Vladimir Akopyan
- Department of Engineering Geology, Bases, and Foundations, Don State Technical University, 344003 Rostov-on-Don, Russia; (S.A.S.); (E.M.S.); (V.A.)
| | - Aleksandr V. Shilov
- Department of Reinforced Concrete Structures, Faculty of Industrial and Civil Engineering, Don State Technical University, Gagarin, 1, 344003 Rostov-on-Don, Russia;
| | - Andrei Chernil’nik
- Department of Unique Buildings and Constructions Engineering, Don State Technical University, Gagarin Sq. 1, 344003 Rostov-on-Don, Russia;
| | - Nikita Beskopylny
- Department of Hardware and Software Engineering, Don State Technical University, Gagarin Sq. 1, 344003 Rostov-on-Don, Russia;
| |
Collapse
|
6
|
Enhanced Eco-Friendly Concrete Nano-Change with Eggshell Powder. APPLIED SCIENCES-BASEL 2022. [DOI: 10.3390/app12136606] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 12/16/2022]
Abstract
One of the unifying factors for all countries is the large consumption of chicken, and other, eggs in food and other types of economic activity. After using various types of eggs for their intended purpose, a large amount of waste accumulates in the form of eggshells. Currently, this problem exists and needs a non-trivial, original solution. The aim of the work was to fill the scientific gap in the direction of studying the microstructure formation of improved nano-modified environmentally-friendly concrete based on eggshell powder and obtaining a concrete composition for the manufacture of an industrial sample of such a material. An environmentally-friendly concrete was obtained, the characteristics of which were improved relative to standard concrete by modifying it with eggshell powder, for which the optimal dosage was determined. The most effective was the replacement of part of the cement with eggshell powder in the amount of 10%. The maximum increase in strength characteristics ranged from 8% to 11%. The modulus of elasticity increased by 4% compared to the control samples without eggshell powder. The maximum reduction in deformations under axial compression and tension in comparison with the control values ranged from 5% to 10%. The study of the composite’s microstructure nano-modified with eggshell powder, and an analysis of the changes occurring in this microstructure due to nano-modification, confirmed the improvement in characteristics and the optimal dosage of eggshell powder.
Collapse
|
7
|
Beskopylny AN, Shcherban’ EM, Stel’makh SA, Mailyan LR, Meskhi B, Evtushenko A, Varavka V, Beskopylny N. Nano-Modified Vibrocentrifuged Concrete with Granulated Blast Slag: The Relationship between Mechanical Properties and Micro-Structural Analysis. MATERIALS 2022; 15:ma15124254. [PMID: 35744311 PMCID: PMC9230015 DOI: 10.3390/ma15124254] [Citation(s) in RCA: 4] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 05/22/2022] [Revised: 06/12/2022] [Accepted: 06/13/2022] [Indexed: 12/25/2022]
Abstract
Currently, in civil engineering, the relevant direction is to minimize the cost of the manufacture of the hollow structures of annular sections, as well as their construction and installation efficiency. To optimize the costs associated with building products and structures, it is proposed to apply the technology of vibrocentrifugation, to reconsider and comprehensively approach the raw materials for the manufacture of such products and structures. The purpose of this study is a theoretical substantiation and experimental verification with analytical numerical confirmation of the possibility of creating improved variotropic structures of vibrocentrifuged concrete nano-modified with ground granulated blast-furnace slag. The study used the methods of electron microscopy, laser granulometry, and X-ray diffraction. Slag activation was carried out in a planetary ball mill; samples were prepared on a special installation developed by the authors—a vibrocentrifuge. The optimal and effective prescription–technological factors were experimentally derived and confirmed at the microlevel using structural analysis. The mathematical dependencies among the composition, macrostructure, microstructure, and final properties of vibrocentrifuged concrete nano-modified by slag are determined. Empirical relationships were identified to express the variation of some mechanical parameters and identify the relationship between them and the composition of the mixture. The optimal dosage of slag was determined, which is 40%. Increases in strength indicators ranged from 16% to 27, density—3%.
Collapse
Affiliation(s)
- Alexey N. Beskopylny
- Department of Transport Systems, Don State Technical University, Gagarin Sq. 1, 344003 Rostov-on-Don, Russia
- Correspondence: ; Tel.: +7-86-3273-8454
| | - Evgenii M. Shcherban’
- Department of Engineering Geology, Bases and Foundations, Don State Technical University, Gagarin Sq. 1, 344003 Rostov-on-Don, Russia; (E.M.S.); (S.A.S.)
| | - Sergey A. Stel’makh
- Department of Engineering Geology, Bases and Foundations, Don State Technical University, Gagarin Sq. 1, 344003 Rostov-on-Don, Russia; (E.M.S.); (S.A.S.)
| | - Levon R. Mailyan
- Department of Roads, Don State Technical University, Gagarin Sq. 1, 344003 Rostov-on-Don, Russia;
| | - Besarion Meskhi
- Department of Life Safety and Environmental Protection, Faculty of Life Safety and Environmental Engineering, Don State Technical University, Gagarin Sq. 1, 344003 Rostov-on-Don, Russia;
| | - Alexandr Evtushenko
- Department of Unique Buildings and Constructions Engineering, Don State Technical University, Gagarin Sq. 1, 344003 Rostov-on-Don, Russia;
| | - Valery Varavka
- Research and Education Center “Materials”, Don State Technical University, Gagarin Sq. 1, 344003 Rostov-on-Don, Russia;
| | - Nikita Beskopylny
- Department of Hardware and Software Engineering, Don State Technical University, Gagarin Sq. 1, 344003 Rostov-on-Don, Russia;
| |
Collapse
|
8
|
Theoretical and Experimental Substantiation of the Efficiency of Combined-Reinforced Glass Fiber Polymer Composite Concrete Elements in Bending. Polymers (Basel) 2022; 14:polym14122324. [PMID: 35745902 PMCID: PMC9227594 DOI: 10.3390/polym14122324] [Citation(s) in RCA: 2] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/10/2022] [Revised: 05/30/2022] [Accepted: 06/04/2022] [Indexed: 01/22/2023] Open
Abstract
An essential problem of current construction engineering is the search for ways to obtain lightweight building structures with improved characteristics. The relevant way is the use of polymer composite reinforcement and concrete with high classes and prime characteristics. The purpose of this work is the theoretical and experimental substantiation of the effectiveness of combined-reinforced glass fiber polymer composite concrete (GFPCC) bending elements, and new recipe, technological and design solutions. We theoretically and experimentally substantiated the effectiveness of GFPCC bending elements from the point of view of three aspects: prescription, technological and constructive. An improvement in the structure and characteristics of glass fiber-reinforced concrete and GFPCC bending elements of a new type has been proven: the compressive strength of glass fiber-reinforced concrete has been increased up to 20%, and the efficiency of GFPCC bending elements is comparable to the concrete bending elements with steel reinforcement of class A1000 and higher. An improvement in the performance of the design due to the synergistic effect of fiber reinforcement of bending elements in combination with polymer composite reinforcement with rods was revealed. The synergistic effect with optimal recipe and technological parameters is due to the combined effect of dispersed fiber, which strengthens concrete at the micro level, and polymer composite reinforcement, which significantly increases the bearing capacity of the element at the macro level. Analytical dependences of the type of functions of the characteristics of bent concrete structures on the arguments—the parameters of the combined reinforcement with fiber and polymer composite reinforcement—are proposed. The synergistic effect of such a development is described, a new controlled significant coefficient of synergistic efficiency of combined reinforcement is proposed. From an economic point of view, the cost of the developed elements has been reduced and is economically more profitable (up to 300%).
Collapse
|
9
|
Beskopylny AN, Stel’makh SA, Shcherban’ EM, Mailyan LR, Meskhi B, Varavka V, Beskopylny N, El’shaeva D. A Study on the Cement Gel Formation Process during the Creation of Nanomodified High-Performance Concrete Based on Nanosilica. Gels 2022; 8:gels8060346. [PMID: 35735690 PMCID: PMC9223191 DOI: 10.3390/gels8060346] [Citation(s) in RCA: 5] [Impact Index Per Article: 2.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/26/2022] [Revised: 05/23/2022] [Accepted: 05/31/2022] [Indexed: 12/19/2022] Open
Abstract
One of the most science-intensive and developing areas is nano-modified concrete. Its characteristics of high-strength, high density, and improved structure, which is not only important at the stage of monitoring their performance, but also at the manufacturing stage, characterize high-performance concrete. The aim of this study is to obtain new theoretical knowledge and experimental-applied dependencies arising from the “composition–microstructure–properties” ratio of high-strength concretes with a nano-modifying additive of the most effective type. The methods of laser granulometry and electron microscopy are applied. The existing concepts from the point of view of theory and practice about the processes of cement gel formation during the creation of nano-modified high-strength concretes with nano-modifying additives are developed. The most rational mode of the nano-modification of high-strength concretes is substantiated as follows: microsilica ground to nanosilica within 12 h. A complex nano-modifier containing nanosilica, superplasticizer, hyperplasticizer, and sodium sulfate was developed. The most effective combination of the four considered factors are: the content of nanosilica is 4% by weight of cement; the content of the superplasticizer additive is 1.4% by weight of cement; the content of the hyperplasticizer additive is 3% by weight of cement; and the water–cement ratio—0.33. The maximum difference of the strength characteristics in comparison with other combinations ranged from 45% to 57%.
Collapse
Affiliation(s)
- Alexey N. Beskopylny
- Department of Transport Systems, Faculty of Roads and Transport Systems, Don State Technical University, Gagarin, 1, 344003 Rostov-on-Don, Russia
- Correspondence: ; Tel.: +7-8632738454
| | - Sergey A. Stel’makh
- Department of Engineering Geology, Bases, and Foundations, Don State Technical University, 344003 Rostov-on-Don, Russia; (S.A.S.); (E.M.S.)
| | - Evgenii M. Shcherban’
- Department of Engineering Geology, Bases, and Foundations, Don State Technical University, 344003 Rostov-on-Don, Russia; (S.A.S.); (E.M.S.)
| | - Levon R. Mailyan
- Department of Roads, Don State Technical University, 344003 Rostov-on-Don, Russia;
| | - Besarion Meskhi
- Department of Life Safety and Environmental Protection, Faculty of Life Safety and Environmental Engineering, Don State Technical University, Gagarin, 1, 344003 Rostov-on-Don, Russia;
| | - Valery Varavka
- Research and Education Center “Materials”, Don State Technical University, Gagarin sq., 1, 344003 Rostov-on-Don, Russia;
| | - Nikita Beskopylny
- Department Hardware and Software Engineering, Don State Technical University, 344003 Rostov-on-Don, Russia;
| | - Diana El’shaeva
- Department of Technological Engineering and Expertise in the Construction Industry, Don State Technical University, 344003 Rostov-on-Don, Russia;
| |
Collapse
|
10
|
Modeling and Experimental Verification of the Performance of Polymer Composite Reinforcing Bars of Different Types in Concrete of Different Density. Polymers (Basel) 2022; 14:polym14091756. [PMID: 35566925 PMCID: PMC9099640 DOI: 10.3390/polym14091756] [Citation(s) in RCA: 7] [Impact Index Per Article: 3.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/03/2022] [Revised: 04/12/2022] [Accepted: 04/20/2022] [Indexed: 02/04/2023] Open
Abstract
Currently, there is a scientific and practical deficit in new methods of integrated technological and design solutions based on improving the properties of concrete as the primary material that perceives compressive loads, and its joint work with various types of reinforcing rods. A new system using an integrated engineering approach to the design of building structures is proposed, which involves minimizing their cost and weight through numerical simulations and an experimental verification of the operation of reinforcing bars made of various materials in concrete of various densities. The control of the bearing capacity of reinforced building structures on the example of compressed elements is proposed to be carried out using the developed recipe-technological methods at the manufacturing stage. The economic and environmental efficiency of nano modification with the help of production waste and the use of lightweight dispersion-reinforced concrete to obtain such structures was revealed. The most effective concrete formulations showed strength gains ranging from 10% to 34%. Ultimately, this led to an increase in the bearing capacity of the elements up to 30%. The application of such an integrated lean approach will allow saving up to 20% of resources during construction.
Collapse
|
11
|
Development of High-Tech Self-Compacting Concrete Mixtures Based on Nano-Modifiers of Various Types. MATERIALS 2022; 15:ma15082739. [PMID: 35454432 PMCID: PMC9025274 DOI: 10.3390/ma15082739] [Citation(s) in RCA: 10] [Impact Index Per Article: 5.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 02/27/2022] [Revised: 04/02/2022] [Accepted: 04/06/2022] [Indexed: 02/01/2023]
Abstract
Promising areas of concrete material science are maximum greening, reducing the carbon footprint, and, at the same time, solving the problems of increasing the cost of raw materials using industrial waste as modifiers for self-compacting concrete mixtures. This study aimed to review, investigate and test from the point of view of theory and practice the possibility of using various industrial types as a nano-modifier in self-compacting concrete with improved performance. The possibility of nano-modification of self-compacting concrete with a complex modifier based on industrial waste has been proved and substantiated theoretically and experimentally. The possibility of improving the technological properties of concrete mixtures using such nanomodifiers was confirmed. The recipe and technological parameters of the process were revealed and their influence on the characteristics of concrete mixes and concretes were expressed and determined. Experimental technological and mathematical dependencies between the characteristics of the technological process and raw materials and the characteristics of concrete mixtures and concretes were determined. The optimization of these parameters was carried out, a theoretical substantiation of the obtained results was proposed, and a quantitative picture was presented, expressed in the increment of the properties of self-compacting concrete mixtures using nano-modifiers from industrial waste concretes based on them. The mobility of the concrete mixture increased by 12%, and the fluidity of the mixture increased by 83%. In relation to the control composition, the concrete strength increased by 19%, and the water resistance of concrete increased by 22%. The ultimate strains decreased by 14%, and elastic modulus increased by 11%.
Collapse
|
12
|
Smirnova OM, Menendez Pidal I, Alekseev AV, Petrov DN, Popov MG. Strain Hardening of Polypropylene Microfiber Reinforced Composite Based on Alkali-Activated Slag Matrix. MATERIALS 2022; 15:ma15041607. [PMID: 35208146 PMCID: PMC8874579 DOI: 10.3390/ma15041607] [Citation(s) in RCA: 5] [Impact Index Per Article: 2.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 01/24/2022] [Revised: 02/12/2022] [Accepted: 02/17/2022] [Indexed: 11/30/2022]
Abstract
A comparative study of the fracture features, strength and deformation properties of pseudo strain-hardening composites based on alkali-activated slag and Portland cement matrices with polypropylene microfiber was carried out. Correlations between their compositions and characteristics of stress–strain diagrams under tension in bending with an additional determination of acoustic emission parameters were determined. An average strength alkali-activated slag matrix with compressive strength of 40 MPa and a high-strength Portland cement matrix with compressive strength of 70 MPa were used. The matrix compositions were selected for high filling the composites with polypropylene microfiber in the amount of 5%-vol. and 3.5%-vol. ensuring the workability at the low water-to-binder ratios of 0.22 and 0.3 for Portland cement and alkali-activated slag matrices, respectively. Deformation diagrams were obtained for all studied compositions. Peaks in the number of acoustic signals in alkali-activated slag composites were observed only in the strain-softening zone. Graphs of dependence of the rate of acoustic events occurrence in samples from the start of the test experimentally prove that this method of non-destructive testing can be used to monitor structures based on strain-hardening composites.
Collapse
Affiliation(s)
- Olga M. Smirnova
- Department of Constructing Mining Enterprises and Underground Structures, Saint-Petersburg Mining University, 21-st Line V.O., 2, 199106 Saint-Petersburg, Russia; (A.V.A.); (D.N.P.); (M.G.P.)
- Correspondence:
| | - Ignacio Menendez Pidal
- Laboratorio de Geología, Departamento de Ingeniería y Morfología del Terreno, Universidad Politécnica de Madrid, 28040 Madrid, Spain;
| | - Aleksandr V. Alekseev
- Department of Constructing Mining Enterprises and Underground Structures, Saint-Petersburg Mining University, 21-st Line V.O., 2, 199106 Saint-Petersburg, Russia; (A.V.A.); (D.N.P.); (M.G.P.)
| | - Dmitry N. Petrov
- Department of Constructing Mining Enterprises and Underground Structures, Saint-Petersburg Mining University, 21-st Line V.O., 2, 199106 Saint-Petersburg, Russia; (A.V.A.); (D.N.P.); (M.G.P.)
| | - Mikhail G. Popov
- Department of Constructing Mining Enterprises and Underground Structures, Saint-Petersburg Mining University, 21-st Line V.O., 2, 199106 Saint-Petersburg, Russia; (A.V.A.); (D.N.P.); (M.G.P.)
| |
Collapse
|