Enhancement of High-Intensity Focused Ultrasound Heating by Short-Pulse Generated Cavitation

Enhancing cavitation dynamics and its mechanical effects with dual-frequency ultrasound

Objective. Acoustic cavitation and its mechanical effects (e.g. stress and strain) play a primary role in ultrasound applications. Introducing encapsulated microbubbles as cavitation nuclei and utilizing dual-frequency ultrasound excitation are highly effective approaches to reduce cavitation thresholds and enhance cavitation effects. However, the cavitation dynamics of encapsulated microbubbles and the resultant stress/strain in viscoelastic tissues under dual-frequency excitation are poorly understood, especially for the enhancement effects caused by a dual-frequency approach. The goal of this study was to numerically investigate the dynamics of a lipid-coated microbubble and the spatiotemporal distributions of the stress and strain under dual-frequency excitation. Approach. The Gilmore–Zener bubble model was coupled with a shell model for the nonlinear changes of both shell elasticity and viscosity to accurately simulate the cavitation dynamics of lipid-coated microbubbles in viscoelastic tissues. Then, the spatiotemporal evolutions of the cavitation-induced stress and strain in the surrounding tissues were characterized quantitatively. Finally, the influences of some paramount parameters were examined to optimize the outcomes. Main results. We demonstrated that the cavitation dynamics and associated stress/strain were prominently enhanced by a dual-frequency excitation, highlighting positive correlations between the maximum bubble expansion and the maximum stress/strain. Moreover, the results showed that the dual-frequency ultrasound with smaller differences in its frequencies and pressure amplitudes could enhance the bubble oscillations and stress/strain more efficiently, whereas the phase difference manifested small influences under these conditions. Additionally, the dual-frequency approach seemed to show a stronger enhancement effect with the shell/tissue viscoelasticity increasing to a certain extent. Significance. This study might contribute to optimizing the dual-frequency operation in terms of cavitation dynamics and its mechanical effects for high-efficient ultrasound applications.

Enhanced Shock Scattering Histotripsy With Pseudomonopolar Ultrasound Pulses

Shock scattering histotripsy involves a complex interaction between positive and negative phases of an acoustic burst to initiate a robust cavitation bubble cloud. To more precisely study these effects and optimize shock scattering histotripsy therapy, we constructed a frequency compounding transducer to generate pseudomonopolar ultrasound pulses. The transducer consisted of 113 individual piezoelectric elements with various resonant frequencies (250 kHz, 500 kHz, 750 kHz, 1 MHz, 1.5 MHz, 2 MHz, and 3 MHz). For each resonant frequency, an extremely short pulse could be generated. Pseudomonopolar peak positive pulses were generated by aligning the principal peak positive pressures of individual frequency components temporally, so that they added constructively, and destructive interference occurred outside the peak-positive-overlapped temporal window. After inverting the polarity of the excitation signals, pseudomonopolar peak negative pulses were generated similarly by aligning principal peak negative pressures. Decoupling the positive and negative acoustic phases could have significant advantages for therapeutic applications enhancing precision and avoiding cavitation at tissue interfaces by using mostly positive pressure pulses. For example, we show that 16 shock scattering bubble clouds can be generated using only peak positive pulses following a single peak negative pulse that initiates a pressure release "seed cloud" from which the first shock front is "scattered." Subsequent positive only pulses result in a precise elongated lesion within red blood cell phantoms.

Cavitation Induced by Janus-Like Mesoporous Silicon Nanoparticles Enhances Ultrasound Hyperthermia

The presence of nanoparticles lowers the levels of ultrasound (US) intensity needed to achieve the therapeutic effect and improves the contrast between healthy and pathological tissues. Here, we evaluate the role of two main mechanisms that contribute to the US-induced heating of aqueous suspensions of biodegradable nanoparticles (NPs) of mesoporous silicon prepared by electrochemical etching of heavily boron-doped crystalline silicon wafers in a hydrofluoric acid solution. The first mechanism is associated with an increase of the attenuation of US in the presence of NPs due to additional scattering and viscous dissipation, which was numerically simulated and compared to the experimental data. The second mechanism is caused by acoustic cavitation leading to intense bubble collapse and energy release in the vicinity of NPs. This effect is found to be pronounced for as-called Janus NPs produced via a nano-stopper technique, which allow us to prepare mesoporous NPs with hydrophobic inner pore walls and hydrophilic external surface. Such Janus-like NPs trap air inside the pores when dispersed in water. The precise measurement of the heating dynamics in situ enabled us to detect the excessive heat production by Janus-like NPs over their completely hydrophilic counterparts. The excessive heat is attributed to the high intensity cavitation in the suspension of Janus-like NPs. The present work elicits the potential of specifically designed Janus-like mesoporous silicon NPs in the field of nanotheranostics based on ultrasound radiation.

Sonodynamic Therapy With Anticancer Micelles and High-Intensity Focused Ultrasound in Treatment of Canine Cancer

Sonodynamic therapy (SDT) is a minimally invasive anticancer therapy involving a chemical sonosensitizer and high-intensity focused ultrasound (HIFU). SDT enables the reduction of drug dose and HIFU irradiation power compared to those of conventional monotherapies. In our previous study, mouse models of colon and pancreatic cancer were used to confirm the effectiveness of SDT vs. drug-only or HIFU-only therapy. To validate its usefulness, we performed a clinical trial of SDT using an anticancer micelle (NC-6300) and our HIFU system in four pet dogs with spontaneous tumors, including chondrosarcoma, osteosarcoma, hepatocellular cancer, and prostate cancer. The fact that no adverse events were observed, suggests the usefulness of SDT.

Electrochemical Performance of a Lithium Ion Battery with Different Nanoporous Current Collectors

In this work, we use ultrasonication and chemical etching agents to assist preparation of metal current collectors with nano-scale pores on the surface. Four different current collectors (copper foil, copper foam, aluminum foil, and aluminum foam) are prepared. The preparation parameters, ultrasonic time and etching agent concentration, are investigated and optimized accordingly. The morphologies of the as-prepared current collectors are observed under a scanning electronic microscope. Soft-packed lithium ion batteries with various current collectors are fabricated and tested. The prepared lithium ion batteries show good long-term cycle stability. The nanoporous structure of the current collector has little impact on the improvement of battery capacity under slow charging/discharging rates but has a positive impact on capacity retention under fast charging/discharging rates.

Evaluation of a Three Hydrophones Method for 2-Dimensional Cavitation Localization

Cavitation is a critical parameter in various therapeutic applications involving ultrasound (US) such as histotrispy, lithothripsy, drug delivery, and cavitation-enhanced hyperthermia. A cavitation exposure outside the region of interest may lead to suboptimal treatment efficacy or in a worse case, to safety issues. Current methods of localizing cavitation are based on imaging approaches, such as beamforming the cavitation signals received passively by a US imager. These methods, although efficient, require expensive equipment, which may discourage potential future developments. We propose a threehydrophone method to localize the cavitation cloud source. Firstly, the delays between the three receptors are measured by detecting the maximum of their inter-correlations. Then, the position of the source is calculated by either minimizing a cost function or solving hyperbolic equations. After a numerical validation, the method was assessed experimentally. This method was able to track a source displacement with accuracy similar to the size of the cavitation cloud (2-4 millimeters). This light and versatile method provides interesting perspectives since localization can be executed in real time and the extension to three-dimensional localization seems straightforward.