Virtual Source Array-Based Multiple Time-Reversal Focusing

Underwater Sound Source Localization Based on Passive Time-Reversal Mirror and Ray Theory

This study investigates the performance of a passive time-reversal mirror (TRM) combined with acoustic ray theory in localizing underwater sound sources with high frequencies (3-7 kHz). The TRM was installed on a floating buoy and comprised four hydrophones. The ray-tracing code BELLHOP was used to determine the transfer function between a sound source and a field point. The transfer function in the frequency domain obtained from BELLHOP was transformed into the time domain. The pressure field was then obtained by taking the convolution of the transfer function in the time domain with the time-reversed signals that were received by the hydrophones in the TRM. The location with the maximum pressure value was designated as the location of the source. The performance of the proposed methodology for source localization was tested in a towing tank and in the ocean. The aforementioned tests revealed that even when the distances between a source and the TRM were up to 1600 m, the distance deviations between estimated and actual source locations were mostly less than 2 m. Errors originated mainly from inaccurate depth estimation, and the literature indicates that they can be reduced by increasing the number of TRM elements and their apertures.

Feasibility Study of Steel Bar Corrosion Monitoring Using a Piezoceramic Transducer Enabled Time Reversal Method

Steel bars, which are commonly used as reinforcements in concrete structures, are slender rods and are good conduits for stress wave propagation. In this paper, a lead zirconate titanate (PZT)-based steel bar corrosion monitoring approach was proposed. Two PZT transducers are surface-bonded on the two ends of a steel rod, respectively. One works as actuator to generate stress waves, and the other functions as a sensor to detect the propagated stress waves. Time reverse technology was applied in this research to monitor the corrosion of the steel bars with a high signal to noise ratio (SNR). Accelerated corrosion experiments of steel bars were conducted. The anti-corrosion performance of the protected piezoceramic transducers was tested first, and then they were used to monitor the corrosion of the steel bar using the time reversal method. The degree of corrosion in the steel bar was determined by the ratio of mass loss during the experiment. The experimental results show that the peak values of the signal that were obtained by time reversal operation are linearly related to the degree of corrosion of the steel bar, which demonstrates the feasibility of the proposed approach for monitoring the corrosion of steel bars using the time reversal method enabled by piezoceramic transducers.